Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.0 LAccepted-AOC H NO 787 22 JHANG COLONY ROHTAK 124001 | ROHTAK | HARYANA | 124001 | L1 | Accepted-AOC accepted | |
| 2 | L2₹34.1 L+₹3.1 L (9.97%)Rejected-AOC MEHEM ROAD NEAR TVS BIKE AGENCY GOHANA SONIPAT HARYANA 131301 ON MEHAM ROAD NEAR TVS BIKE AGENCY GOHANA 131301 | SONIPAT | HARYANA | 131301 | L2 | Rejected-AOC rejected | |
| 3 | L3₹34.6 L+₹3.7 L (11.8%)Rejected-AOC 482 GALI NO 4 TULSI VIHAR AZAD NAGAR HISAR 125001 | HISAR | HISAR | HARYANA | 125001 | L3 | Rejected-AOC rejected | |
| 4 | L4₹42.2 L+₹11.2 L (36.1%)Rejected-AOC 62 PINK ROSE COLONY KAIMARI ROAD 125001 | HISAR | HARYANA | 125001 | L4 | Rejected-AOC rejected | |
| 5 | L5₹44.8 L+₹13.8 L (44.7%)Rejected-AOC GAUSHALA MARKET TEHSIL NARNAUL NARNAUL 123001 | NARNAUL | NARNAUL | HARYANA | 123001 | L5 | Rejected-AOC rejected |
Tender Value
₹41.1 L
EMD Value
₹82,220
Closing Date
26 Oct 2023, 5:00 pmClosed
VISHWNATH KHICHI
ED - Rohtak
The Government of Haryana has approved a scheme for the Construction of SDO (Civil) Complex at Badli in District Jhajjar. The work stands administratively approved amounting to Rs.23,61,52,000/- only vide Financial Commissioner, Revenue and Additiona
2023_HRY_318269_1
202324ADB19D A7AA 4369 A960 5302D5F7BCA1667BAR
Open Tender
Electrical Works
Works
180 days
BADLI
Technical documents as per approved DNIT conditions.
3 documents required · 3 mandatory
₹5,000
₹82,220
Yes
7 Aug 2024
6 Oct 2023
27 Oct 2023
6 Oct 2023
26 Oct 2023
6 Oct 2023
Amount
HSR Items
[11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand)
[20.84]Providing and fixing of insulated rubber matting suitable for 11 KV installation 1 M x 2 M x 12 mm thick (IS code 15652-40091) as per specification complete and as per directions of Engineer-in-charge
[23.22.1.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.3. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. TRIPLE POLE MCCB 16 to 100 Amp, 25 KA
[23.22.1.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.5. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. TRIPLE POLE MCCB 200 to 250 Amp, 25 KA
[23.22.8.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 8.5. SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings 400 amp 415 volts
[24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.
[24.1.10]EARTHING AND LIGHTENING ARRESTOR 10. Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material.
[24.1.14]EARTHING AND LIGHTENING ARRESTOR 14. Supply and erection of 20mm x 3 mm thick GI, tape fixed with suitable G.I. staples of same size.
[24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required.
[24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.
[24.1.4]EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required.
[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode.
[24.1.9]EARTHING AND LIGHTENING ARRESTOR 9. Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required.
[24.2.7.4]LT CABLE 7.4. Supply and erection of suitable compression type brass cable glands for underground Cable :- 70 sqmm to 95 sqmm Cable 3 to 3½ Core
[24.2.7.5]LT CABLE 7.5. Supply and erection of suitable compression type brass cable glands for underground Cable :- 120 sqmm to 185 sqmm Cable 3 to 32 Core
[24.2.7.6]LT CABLE 7.6. Supply and erection of suitable compression type brass cable glands for underground Cable :- 240 sqmm to Cable 3 to 32 Core
[24.3.3.1]HT CABLE 3.1. Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm
[24.3.4.1]HT CABLE 4.1. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm
[24.5.2.6]MISCELLANEOUS ITEMS 2.6. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 145/123 mm outer dia/ inner dia
[7.20.2]Brick work with common burnt clay modular bricks of class designation 10.5 in foundation and plinth in: 2. Cement Mortar 1:6 (1 cement : 6 coarse sand).
NS Items
`Erection` of MS Angle 50 x 50 x 6 mm, M.S. flat and nuts and bolts including cutting, bending to the required shape drilling holding carriage, painting loading and unloading complete in all respect.
Supply and Erection of XLPE (E) 11 KV HT alluminium armoured cable ISI marked in existing pipe / trenches / surface with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. i) 70 Sqmm 3 Core XLPE Cable
Supply, erection, testing and commissioning of outdoor type copper wound, transformer of 315 KVA 11 / 433 KV, 3 Phase, 50 Hz complete in all respect upto the entire satisfaction of Engineer-in-charge of work ( on existing pole / plateform including first filling of oil conforming to IS 1180 Part-II) Make : Alstom, Bharat Bijlee, Kirloskar, Siemens, Crompton, NGEF and Volt amp. KVA 315 No. load voltage ratio 11/ 433 KV No. of Phase 3 Frequency cycles 50 Hz Types Double wound core type Copper wound. Cooling ONAN Duty Outdoor Vector Group ISS-DYN 11 / IS 2026 /77 Tapping on HV compensation plus 5% to - 5% Insteps of 2.5% Temperature rise (Oil / res.00) 500 / 550 C Attitude upto 1000 m above MSL Off circuit tape changer Externally hand operated Oil conservator with filling hole and cap Plain oil level gauge with minimum level marking Thermometer pocket
4 Nos. Plain roller undirectional. 2 Nos. 4` dial type thermometer Silica Gel breather 1st filling of oil. Drain cum filter valve with plug. Rating and diagram plate. Two earthing terminals Lifting arrangement Explosion vent Air release plug. Oil conservator tank Shunt off valve between buchloz and conservator TERMINATION HV-3 Pole single glands cable box suitable for reception of one No. 3 core upto 120 sqmm HT XLPE cable including compound for filling the cable end box with copper lugs / thimble. LV- 4 Pole 3 glands cable boxes suitable for 3 Nos. 240 sqmm 3.5 core Polyvinyl chloride cable having extended copper bars of requisite Capacity from LT bushing for making connections with cable including cost of copper lugs, thimbles LV : Neutral suitable cable Box for earthing provided.
Supply, erection, testing and commissioning of 11 KV Indoor H.T. Metering Panel complete with CTs, PTs cubical and electronics meter with accuracy class 0.5 as per requirement / approved by HVPN Consisting of the following :` Cubical panel free standing floor mounting type made of sheet steel 14-G SWG CRCA sheet with channel iron base frame spray painted with strong Synthetic grey channel paint as per size and design approved by HVPN . 3 Nos. 11 KV CTs of rating as approved by HVPN for indoor installation of approved make of HVPN. One No. 11 KV PT 11000/110 Volts 10 KA burden 0.5 accuracy oil filled suitable for indoor installation of approved make of HVPN. Digital electronic meter 3 Phase 4 wires 0.5 accuracy for recording reading operating system for difference kind of readings. The cubical panel will be complete in all respect including interconnection, internal wiring with PVC copper cable its testing / approval of all times by HVPN including cost of all testing / approval charges of all items by HVPN with a guarantee of one year from the date of commissioning including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work.
Supply and erection of MS bucket stand which include cost of 6 Nos. fire bucket with 9 liter capacity with stand filling including cost of welding and painting of complete stand and buckets with one coat of red oxide and two coats of approved paint of red colour written with fire on the buckets as per fire protection with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work.
Supply and Erection of 11 KV gang operated switch `Jayshree Make` conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing `H` pole with the help of 3 Nos. channels of size 75 mm x 40 mm x 6 mm, 1.8 M. long fixed with suitable size of MS clamp, nuts and bolts including cost of 6 Nos. 11 KV insulator with GI Pin, RD fuses and painting with 2 coats of approved paint and one coat of red oxide material required to complete the job in all respect utpo the entire satisfaction of Engineer-in-charge of work.
`Supply and Erection` of Lightening Arrestor Model SDU ALPRO make suitable for 11 KV 3 Phase 50 Hz grounded neutral system comprising of Speek gap type ( Quench gap type ) in series with non liner resister element housesed in horizontally Scale porcelain bushing with line and ground terminal along with mounting clamps Conforming to ISS 3070 (Part-1) of 1985 with latest amendment with all labour and material required to complete the job in all respect utpo the entire satisfaction of Engineer-in-charge of work.
`Providing and Fixing of Stay Set complete with stay wire with dis insulator as per specification upto the entire satisfaction of Engineer-in-charge of work`.
Providing and fixing of Wire Mesh Jali around the Transformer of size 4`x 8` made out of 75 x 25 x 3.25 mm jali fixed with angle iron frame made out of M.S. angle 50 x 50 x 6 mm support of M.S. flat 50 x 6 mm and fixed in C.C. Block 1:2:4 including cutting, welding etc. as per drawing complete in all respect upto the entire satisfaction of the Engineer-in-Charge
Supply and Erection of PCC 9 Mtr. Pole to complete the work in all respect upto the entire satisfaction of Engineer-in-Charge of the work.
Supply and Erection of Underground Cable loose in existing pipe or trenches complete in all respect upto up to the entire satisfaction of Engineer-in-Charge of the work. Make: - Havells / Polycab / RR / Grandlay 120 Sqmm 3.5 Core Ard. Cable
Supply and Erection of Underground Cable loose in existing pipe or trenches complete in all respect upto up to the entire satisfaction of Engineer-in-Charge of the work. Make: - Havells / Polycab / RR / Grandlay 95 Sqmm 3.5 Core Ard. Cable
Supply and Erection of Underground Cable loose in existing pipe or trenches complete in all respect upto up to the entire satisfaction of Engineer-in-Charge of the work. Make: - Havells / Polycab / RR / Grandlay 240 Sqmm 3.5 Core Ard. Cable
PS ELECTRIC
Virender Singh prop. Balaji electric company
J.B.S.Electrical Co.
Shree Shyam Associates
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .