CA No CWE/PAT/T-35/2020-21 SPECIAL REPAIR TO OR MD ACCN BLDG NO P 126 TOTAL 12 QUARTERS OF ASC BN UNDER GE NORTH PATIALA

Amount

Schedule 'A'Section-I (Building Works)

Total amount of Sch 'A' Sec I (Building Works)

Schedule 'A'Section-II (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec II (Internal Electrification Works)

Schedule 'A'Section-III (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge. Make : Pidilite/Sika

Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)

Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian (ACE) / Berger (WALMASTA) / Nerolac (SURAKSHA SUPERIOR)

S&F factory made flush shutters 35mm thick, confoirming to IS : 2202 (part-I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneer on both faces of shutters compete all as specified and including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.22mm) and including painting with one coat of pink primer and two coats of synthetic enamel paint and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 nos per leaf (e) 150mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate - 1 nos per leaf

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick PVC celuka Board wooden finish pre-laminated on one side and plain on other side below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf Make : Aluminium Section) : Jindal / Valco / Galco / Hindalco or equivalent as approved by AO.

Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating with provision for desert cooler, doubled panelled and double shutters consisting of frame and mullion of 101.60 X 44.45 X 1.29 mm and shutters made of 63.5 X 31.75 X 1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 Nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 Nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 Nos per leaf. Make : Aluminium Section) : Jindal / Valco / Galco / Hindalco or equivalent as approved by AO.

Providing and fixing aluminium siliding windows with 50 micron powder coating, three track sliding windows with two glazed shutters, one 5mm th tinted glass ordinary quality and one shutter of stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, including EPDM gasket to render the glazing, air and water tight etc complete all as specified and as directed. Section of Jindal company : Three track bottom - 20957, Three track tp / vertical - 20958, handle - 20606, Interlocking - 20605, To and bottom - 20604.

S&F factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 65% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 35% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified. Make : Aluminium Section) : Jindal / Valco / Galco / Hindalco or equivalent as approved by AO.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified.

M&L for single charge, vitrified, stainfree & scratch resistant, joint free, Premium (1st) quality straight edge coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern as approved, set and jointed over & including 20mm th screed bed in CM 1:4 and pointed in white or coloured cement to match, in floors etc. and pointed in white cement with pigment to match the colour of tiles complete all as specified. Make - Johnson / Kajaria / Somany / NITCO as approved by AO.

M&L for single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 100 mm and 9-10 mm thick in any pattern of light coloured tiles as approved, on vertical surfaces such as in skirting/dado etc, height not more than 150mm in any pattern of light and dark, as approved to match the floor tiles, set and jointed over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Make - Johnson / Kajaria / Somany / NITCO as approved by AO. .

M&L for Premium (1st) quality straight edge, ceramic 300 X 300 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified. Make : Johnson (Digital HD Tiles) (Barstow or Sobaro Deep) or equivalent from Kajaria/Somany as approved by Accepting Officer..

M&L for anti-skid premium (1st) quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4), pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-Charge. Make - Johnson / Kajaria / Somany as approved by AO.

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the front length, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

S&F vitreous china premium/1st quality wall hung wash basin, white, flat back, min. size 500x400 mm , screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling half thread and complete in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified. Make : Cera (WHB-Cadal (Cat No. S2040121), Waste Coupling Cat No F8050102, Bottle Trap Cera or equivalent from /Jaquar/Hindware/Parryware as approved by AO

S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish with smooth finish edges/sides complete fixed in position all as specified and directed.

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified. Make : Prayag (FT-31M) or equivalent as approved by AO.

S&F stainless steel tubing of 25mm dia mild steel chromium plated 1.0mm thickness as in curtain rod complete including S&F 02 nos stainless steel brackets fency type stop etc in repairs all as specified & directed. Note :- For the purpose of measurement and payment running length of curtain rod only shall be considered.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. Make : Hindware (Sleek Essence Dual Flush) or Cera (Corona) or Prayag (Vintage) or equivalent from Parryware.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified. Make : Cera (Conventional) or Hindware (Slick) equivalent from Parryware

S&F PTMT jet spray with 1.5m long flexible tube including making connections and fixed in position complete in all respect as specified. Make : Prayag (Cat No 522) or equivalent as approved by AO.

S&F central hole brass chromium plated basin mixer with regular spout with/without popup waste system with 450mm long braided holes complete all as specified and directed. Make : Jaguar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag (Naptune Series).

S&F Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. Make : Jaguar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag (Naptune Series).

S&F overhead shower 120mm dia with 225-230mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified. Make : Cera (Cat No. - F7020103)/Jaquar/Marc/Prima

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified. Make : Jaguar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag (Naptune Series).

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 mm micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm all as specified.

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams, ceilings and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including cutting grooves in brick /concrete wall and preparation of surfaces to receive finishes complete all as specified and directed.

S&F 18 mm thick min density 600 kg/cum LEAD FREE PVC Celuka ply of both side plain white color fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F 18 mm thick with min density 600kg/cum LEAD FREE PVC Celuka ply of single side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F 12 mm thick LEAD FREE PVC Celuka ply fixed with ss screws and slovent cement/ adhesive to ake wall mount kitchen cabinet back and pull out drawers side complete as per manufacturer’s instructions complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F 5 mm thick min density 600 kg/cum LEAD FREE PVC Celuka ply of single side rigid laminated of approved colour and other side plain white colour and pasted with solvent cement / adhesive on frame work of cup boards complete as per manufacturer's instructions complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F 6 mm thick min density 600 kg/cum LEAD FREE PVC ply fixed with ss screws and slovent cement/ adhesive to ake wall mount kitchen cabinet back and pull out drawers side complete as per manufacturer’s instructions complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified. Make : Harrison (Jasmine) or equivalent as approved by AO

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified. Make : Harrison (Jasmine) or equivalent as approved by AO

S&F Piano Hinge of size 19 mm stainless steel complete all as specified and directed.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.

S&F stainless steel sink without drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/round strainer of 110mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 610mm x510x203mm with bowl size 560x405x203mm and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed. Make : Prayag / Neelkanth / Nirali / Diamond

S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions all as specified. Make : Hettitch or equivalent as approved.

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength in longitudinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified. Make : Sika/STP/Fosroc or equivalent as approved by AO.

S&F Stainless Steel plate rack, glossy finish for kitchen over all size 900 mm x600 mm x 250 mm complete fixed in position as recommended by manufacturer with SS Screws / Fastners etc all as directed. Make : Vidhi or equivalent as approved by AO

S&F PTMT 450 mm long shelf for wash basin, fixed in position complete all as specified and directed. Make : Prayag (Cat No. 191) or equivalent as approved by AO.

S&F sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

Chipping of unsound weak concrete / cover of reinforcement over slab, column and walls as per site requirement by chieseling maximum upto 30mm depth and removal of rubbish off the premises complete all as directed by Engineer in Charge. Note : Rate of scaffolding is deemed to be included in the rates quoted by the contractor.

Supply and apply of rust remover cum passivator by brush in two coat @ 0.3 kg/m2/coat of Density: 1.01 Kg/l at 300C complete all as per manufacturer's instructions and all as specified. Note : 1. The application of rust removal shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. 2. Rates of scaffolding is deemed to be included in the rates quoted by the contractor against each item. Make : Sika Rustoff 100 or equivalent from Fosroc.

Supply and apply Cementitious Coating for Corrosion Protection having a cement based polymer modified rebar corrosion protection system by appling the first coat approx. 1mm thick layer of product carbonation resistance 2 mm of SikaTop Armatec®-108 or equivalent as specified corresponds to 20 mm of normal mortar; bond strength > 1N/mm2 according to ASTM C 882-78 applying @ 4 kg/m2 for two coats onto the prepared reinforcing steel with a medium- stiff brush. It is unavoidable that Sspecified product will also be applied onto the surrounding concrete. The second coat is applied in the same way after a waiting time of 2-3 hours (at +20°C) complete all as per manufacturer's instructions and all as specified. Note : 1. The application of Cementitious Coating for Corrosion Protection shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. 2. Rates of scaffolding is deemed to be included in the rates quoted by the contractor against each item. Make : Sika Top (R) -Armatec - 108 or equivalent from Fosroc.

Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer's specification including prepartaion of surface by chipping and throughly cleaning of surface complete whereever required and as per directions of Engineer-in-charge. Consumption: 0.5 kg/m2. complete all as per manufacturer's instructions and all as specified. Product requirements: Complies with ASTM C 881 Type II Grade 2 Class B+C. Note : 1. The application of Epoxy Bonding Primer shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. 2. Rates of scaffolding is deemed to be included in the rates quoted by the contractor against each item. Make : Sikadur (R) -32 LP or equivalent from Fosroc.

Supply and apply a pre-batched one component polymer modified cementitious patch repair mortar in 25 mm thickness. Yield: approx. 0.84 ltr/kg. System requirements: compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 3N/ mm2 (7 days) according to ASTM C 293-79. Consumption of 2.1 Kg/Sqm/mm Note : The application of Polymer repair Mortar shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. 2. Rates of scaffolding is deemed to be included in the rates quoted by the contractor against each item. Make : SikaTop(R) -122 HS or equivalent from Fosroc.

S&F auto closing hinges 35mm of 0 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified

S&F Ball bearing runners 45 mm Telescoping (KTS-20) full extension load capacity 50 kgs complete in all respect all as specified. Make : KAFF/Hettich

S&F towel bolts 150mm long of stainless steel 304 finished/of outer plate metal matt finished complete all as specified and directed..

S&F stainless steel 304 grade wire basket (avg weight 2.5 to 4 kg per basket) of pull out type like plain/cup & saucer/bottle/multi purpose/ 2-3 shelf basket etc for kitchen of required size complete in all respect all as specified. Make : Hettich/Godrej/KAFF/Harrison

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified.

S&F for tube light fittings, LED type retrofit T-8 20 Watt 4 feet long incl LED tube rod and incl 3 core flexible wire 0.5 Sqmm copper cable all as specified & directed, Make- Philips/Havells/CG

S&F MCB DB TPN 4ways VTPN series double door 415 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete all as specified and directed. Make:Schenider,Seimens,Legrand, Hager

S&F MCCB,4 Pole,415 volts,100 amp, 16 KA rupturing capacity for fixing in DBs of including proper thimble connections complete all as specefied and directed. Make:Schenider,Seimens,Legrand

S&F MCB , SPN, 240 Volt , 63 amp for fixing in DBs of including proper thimble connections complete all as specified and directed. Make:Schenider,Seimens,Legrand.

S&F MCB, single pole 240 volts 6 to 32 Amp capacity fixing in DB’s including proper thimble connections complete all as specified and directed. Make:- Indo Asian,standard, havells.Make:Schenider,Seimens,Legrand

Dismantaling/takingout old unserviceable Earthing complete and supply and fix earthing with galvanised steel plate earth electrode 60cmx60cmx6mm thick, burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolt, nut check nuts and washer of galvanised iron or steel with protection of GI, medium grade 15mm bore upto adequate length watering pipe 20mm bore GI common solt 15cm thick all as per electrical plate No 5SSR Part-I and connected to earting test point all as specified or indicated and testing on completion including PCC 1:3:6 type C-2 using 40mm graded stone aggregate CI cover and frame including all excavation and earth work etc all as specified and directed.

Supply & laying XLPE 1100 volts grade heavy duty with PVC insulated, armoured cable, 4 core 35 sqmm in service supply connection passing through trenches, wall, road crossing and poles complete all as specified and directed by Engr-in-Charge.

Buttar Construction Co.

K B Enterprises

Arneja Builders

m/s panchmukhi builders

Swami Engineers

Kartik Builders

M/s Pioneer Construction Co.

M/S Mukesh Kumar Gupta