Special repair to P-9 (Sahdev) Block at Palam Bagh under GE New Delhi, Delhi Cantt-10

Amount

Taking up or down steel tubing and connections of 15 mm dia pipe including cleaning for refixing or removal to store complete all as specified & directed.

Taking up or down steel tubing and connections of 20 mm dia pipe including cleaning for refixing or removal to store complete all as specified & directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 including Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified & directed.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 including Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified & directed.

S & F 20 mm dia Brass Elbow for CPVC pipes complete all as specified & directed.

S & F 20 mm dia Brass Elbow (3/4" x 1/2") for CPVC pipe complete all as specified & directed.

S & F Union 16 / 20 mm for CPVC pipes complete all as specified & directed.

S & F 20 mm dia Brass Tee for CPVC pipes complete all as specified & directed.

Dismantling 100 mm/75 mm dia bore cast iron soil, waste and vent pipes including fittings complete all as specified & directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed.

S & F 110 mm dia UPVC (SWR) pipes 5 mm thick (6 kg/ cm²) pressure pipe, single socketed in any length fixed to walls complete all as specified and directed.

S & F 75 mm dia UPVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length fixed to walls complete all as specified and directed.

S & F 110 mm UPVC (SWR) bends any radius

S & F 75 mm UPVC (SWR) bends any radius

S & F 110 mm UPVC (SWR) branch piece, single (single Y) equal or unequal

S & F 75 mm UPVC (SWR) branch piece, single (single Y) equal or unequal

S & F 110 mm UPVC (SWR) junction single, (Single T) equal or unequal

S & F 75 mm UPVC (SWR) junction single, (Single T) equal or unequal

S & F 110 mm UPVC (SWR) Couplers

S & F 75 mm UPVC (SWR) Couplers

S & F 110/75 mm UPVC (SWR) reducers

S & F 110 mm UPVC (SWR) Cowl

S & F 75 mm UPVC (SWR) Cowl

S&F 150 mm PTMT Symet Bath assets Grating square hole/without hole fixed in position over Rain Water Pipe/nahani trap with cement slurry complete all as specified and directed.

S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE-290 Gde-E-165 complete all as specified and directed.

S&F in repairs 20 mm bore gun metal globe or with iron wheel, screwed both ends for iron pipes fixed complete all as specified and directed.

S&F 32 mm dia high density poly-ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or laid in floors etc complete all as specified and directed.

Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off the shutter from the frame) complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m but with shutters (without taking off shutters from the frame complete in all respect as specified and directed.

Taking down Shutters of any description exc 1 sq. m but n exc 2 sq. m each complete all as specified and directed.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, including hinges, fixing glass in windows and all necessary fitting complete all as specified and directed.

S & F Sheet glass of 4 mm thickness plain glass sheet with oil putty in square n exc 0.5 sq. m in each pane fixing glass in windows including all necessary fitting complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) steel frame including punching or drilling out old glazing pins/spring clips and providing and fixed with metal pinning complete all as specified.

M & L for Securing glass of any description in existing steel frames with putty including removing loose or decayed putty Complete all as specified and directed.

S & F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS square tube used as per specifications and drawings

Supply and fixed Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face 2mm thick plain PVC sheet on back face to be fixed on frame at site as per specification & drawing.

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F 35 mm thick 1st class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fitted to chowkhats complete all as specified and directed.

S and F 35 mm thick 2nd class H wood Plain framed, panelled shutter (two panel) withlock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, supplied and fitted to chowkhats complete all as specified.

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed.

S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm Extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S&F Butt hinges in 100 mm Size, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

Supply and fixed Floor door stopper 140 mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair 15 mm bore dia Stainless Steel finish angular stop cock with wall flange quarter turn full Antique including cover plate complete all as specified and directed.

S & F in repair 15 mm bore dia Stainless Steel finish 2 way Bib Cock quarter turn including cover plate complete in all respect as specified and directed .

Supply and fixed in repair 15 mm bore dia Stainless steel finish quarter turn central hole basin mixer round spout with popup Waste assembly with 10 mm dia , 450 mm long copper pipes complete all as specified and directed.

Supply and fixed in repair 32 mm bore dia CP finish copper alloy bottle trap heavy complete in complete all as specified and directed.

S&F in repairs chromium plated health faucet including 15 mm bore hose connecting pipe 1.2 m long with check nut and washers complete all as specified and directed.

Supply and fixed chromium plated finish paper holder complete all as specified and directed.

Supply and fixed in repairs 600 mm long C P finish Towel Ring Square complete all as specified and directed.

S&F in repairs vitreous china wash hand basin counter top type of size 705mmX450mmx200mm in 18 mm thick granite (of any type) machine cut as in platforms, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 including required angle iron, 32 mm bore dia CP waste coupling, and all required fittings complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl PVC waste pipe and CP waste fitting. Overall size 915mmx460mm bowl size 410mmx330mmx160mm. complete all as specified and directed.

S & F in repairs PVC connections 15 mm size with PTMT steel nuts of length 450 mm

S&F in repair CP Wall mixer (wall mounted model ) 3-1 system with provision for telephonic shower and overhead shower complete with 115 mm long pipe connecting legs and flanges. Hand shower 105 mm dia round shape multi flow with air effect (ABS body & face plate chrome plated) with rubbit cleaning system and over head shower 105 mm dia round shape single flow (ABS body chrome plated with grey face plate) with rubbit cleaning system and with shower arm 20 mm x 600 mm long round shape for wall mounted shower with flange complete all as specified and directed.

S & F PVC mirror cabinet of size 350 mm x 450 mm x150 mm with open able single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror complete all as specified and directed .

S&F in repairs CP grating 125 mm dia round fixed on floor/Nahani trap fixed with cement mortar including necessary cutting etc complete all as specified and directed .

Supply and fixed peg set of 6 fixed with rawal plug complete all as specified and directed .

S & F Stainless steel Double Soap Dish with tumbler holder complete all as specified and directed .

S&F in repair stain less steel curtain rod 25 mm dia with two nos stainless steel brackets and stainless steel end caps, fixed on wall with nylon sleeves and screws complete all as specified and directed .

S & F Glass Shelf assembly Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed .

S&F corner shelf 200 mm size 5mm thick toughened glass complete all as specified and directed .

S&F Stain less steel plate rack made of stainless steel 1mm thick 900mm x 600 mm complete all as specified and directed .

Demolition of Brickwork or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed .

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in Cement Mortar 1:6. complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar.

M&L for Granite stone(of any type) 20 mm thick machine cut, bedded with 20 mm screed bed in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed .

M&L for 20 mm thick granite stone(of any type) machine cut as in vertical surfaces and like, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing laid over and including 15 mm thick rendering in CM 1:4 complete all as specified.

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed ..

M & L for Non skid joint less coloured ceramic tiles 7-8 mm thick area of each tile exc 0.18 Sqm not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed .

M & L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including screeding 10 mm thick in CM 1:3 on wall complete all as specified and directed .

M & L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement screed 1:4, complete all as specified and directed .

All as per item no 73 but in skirting only .

Dismantling water tanks and S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Incl making connection for inlet & outlet complete all as specified and directed .

S & F in repairs ball brass valves high pressure with polythene float & flynut complete screwed for Iron pipe or brass ferrule of 20 mm dia and fixed complete all as specified and directed .

M&L 50 mm thick 1:3:6 type C-1 using 20 mm graded stone aggregates as in plinth protection laid in panels surfaces finished even & fair without using extra cement complete all as specified and directed .

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed .

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in lintels up to 1.5m clear span, cills , copings and like incl. weathering , slightly rounded or chamfered angles and throating including formwork (Straight or curved) complete all as specified and directed.

M&L for Racking out of hair line cracked joints and repair/filling with crack filler/ joint sealant on walls complete all as per the directions of manufacturer and directed.

Taking down cement plaster on brick walls, raking out joints locking for key, scrubbing down with water etc complete all as specified and directed .

M&L for Polymer modified cementious bonding coat , prepared and applied on the concrete/ masonry surfaces with I part of Styrene Butadiene Rubber latex emulsion (SBR latex) with 4 parts of water and 6 parts of cement by weight. Coverage of SBR latex-0.25Ltr / sqm for one coat complete all as specified and directed .

M&L for 15 mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement complete all as specified and directed . ( SBR latex shall be measured and paid separately)

Supply only Styrene Butadiene Rubber latex emulsion.

M&L for preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion paint over one coat of primer and over & incl one coat of wall care putty all as specified and directed.

M&L for Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper on walls over a coat of primer and over & incl one coat of wall care putty complete all as specified and directed.

S & F GI wire netting 0.9mm dia and 12 mm mesh lathing to wood or metal studding, joist etc in walls, ceiling stanchions, beams etc incl all laps cutting and waste complete all as specified and directed .

M&L for 10 mm thick polymer modified plaster in CM (1:3) on fair face of brick or concrete surfaces on ceiling finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement complete all as specified and directed . ( SBR latex shall be measured and paid separately)

M&L for Preparation of new plastered or un-plastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of ceiling by mechanical grinder and applying two coats of oil bound distemper over a coat of primer and over incl one coat of wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall by mechanical grinder and applying two coats of oil bound distemper over a coat of primer and over incl one coat of wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall by mechanical grinder and applying two coats of Exterior Emulsion paint over one coat of primer and over incl one coat of wall care putty all as specified and directed.

M&L for preparation of old wood or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint.

M&L two coat of synthetic enamelled paint over a coat of primer in any approved pattern and colour including preparation of new surfaces of wood exceeding 10cm width or girth not other wise provided complete all as specified and directed .

M&L preparation of old steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed .

M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide all as specified and as directed.

S & F PVC chhajja (Factory made) exc 0.2 sqm and not exc 0.6 sqm and fastener 150 mm long with complete set as per sample including demolition of old RCC chhajja complete all as specified and directed and approved by GE

Dismantling loose concrete cover of RCC columns, beams, slabs, chhajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of polymer with 4 part of water and 6 part of cement by weight, coverage of polymer shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40 mm (average thickness) guniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary Portland cement 43 grade and 2 part of Ghaggar sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floating with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guniting to be finished fair with 10 mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site. ( Welded mesh & additional reinforcement if required measured and paid separately) Note :-Note: Only steel scaffolding is allowed and cost is included in quoted rate. The work shall be carried out by enclosing affected area by green cloth up to Four storey building.

Demolition cement concrete(reinforced) in ground floors and up to 4 storey of any description and in any position incl MS pipes Scaffolding and making arrangements with hessian clothes for protection from falling of concrete & all other saftey precautions complete all as specified and directed.

S & F in repairs Exhaust fan louvers 230/300 mm size, iron including taking out old louvers up to fourth floor complete all as specified & directed. Note :- Ladder / Scaffolding arrangement for fixing louvers and other works where required, up to fourth floor will be made by contractor

M & L for uprooting of plants (girth n.exc 15 cm of trunk to any height of plants) grown along the pipes or walls, chhajjas, parapets and roof of bldgs. and making good the surfaces as per existing surfaces and pouring acid not less than 100 ml for each plant in the root to avoid further growth as directed. Any other grass plants etc below 45 cm height shall also to be removed from the premises complete all as specified and directed. Note: Work has to be executed up to (G + 3 storey) bldg.

S & F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

supply Liquid water proofing compound

M & L for brushing neat cement slurry with 3.0 kg of cement per sq. meter (For Sunken floor) complete all as specified and directed.

M & L for rendering 10 mm thick on concrete surfaces in CM 1:3 over roof finish surface even and smooth without using extra cement with water proofing compound complete all as specified and directed.(water proofing compound shall be measured separately.)

M&L for providing cement concrete type E-2, 1:5:10 (40 mm graded aggregate) in mass concrete and filling etc complete all as specified and directed.

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)including sheet cover complete all as specified and directed.

S & F in repairs PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with 32 mm CP Flush pipe of Low level cistern complete all as specified and directed.

Note for item No. 78 to 101 (also for other items, if required) :- 1. The work described in these items shall be executed in bldgs. up to (G+3 floor) hence the contractor shall make scaffolding arrangements, trestles, ladders etc and hessian clothes for protection & all other safety precautions up to 04 storeys of buildings and the cost for the same is deemed to be included in the quoted unit rates. 2. Water proofing compound to be mixed with neat cement slurry and apply in two coats (for Sunken floor) 3. Removing building materials /old waste unwanted existing material of any description or any type etc. to a distance of 5km or beyond out side MOD Land and the cost for the same is deemed to be included in the quoted unit rates.

Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as switches, light fittings, ceiling rose, pendent holders, bell, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators complete all as specified and directed for the following :-

One light/fan point controlled by one no, one way 5 Amp switch.

One light/fan point controlled by two nos., two way 5 Amp switches.

One bell/buzzer point controlled by one bell push .

One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board .

One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board.

All as per item No. 110 here in before but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board.

Note for item No 110 & 111:- (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in quoted unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

S&F modular switch 230/250 volts grade one way (as catered in point wiring above) complete all as specified and directed of following rating :-

SP 6 Amp rating

Bell push SP 6 Amp rating.

SP 16 Amp rating

All as per item No. 112 here in before but 2 way 6 Amp.

S&F modular socket out let shuttered type flush mounting type, 230/250 volts grade (as catered in point wiring above) complete all as specified and directed of following ratings:-

5 Pin 6 Amp multipurpose type.

6 Pin 16 Amp multipurpose type.

S&F metal clad single pole & neutral with a 2 pin & earth plug and socket complete with MCB SP 20 Amp, 230 volts complete all as specified and directed

S&F in replacement of factory made, sheet steel distribution boards, SPN 12 ways. double door, suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar complete all as specified and directed.

S&F in replacement of MCBs, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed Note: Make of the MCB should be the same as that of DB.

MCB SP 6 to 32 Amps

MCB SPN 40-63 Amps

MCB SP 40-63 Amps

Disconnecting mains connection and taking out old sub main wiring single core 4 sqmm and one single core 2.5/4/6 sqmm aluminum conductor cable from the concealed conduit from the wall/ceiling and making good to the disturbed surface all as specified.

M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 4 sqmm complete drawn in & including new PVC concealed conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly all as specified and directed.

M&L for taking down of ceiling fan of any size and servicing complete, greasing, painting ,changing of ball bearing of any type, Copper rewinding and marking of MES No. etc at site and refixing complete all as directed .

S&F stepped type electronic fan regulator modular type, etc. complete all as specified and directed

M&L for taking down of exhaust fan of any size and servicing complete, greasing, painting ,changing of ball bearing of any type, Copper rewinding and marking of MES No. etc at site and refixing complete all as directed .

M & L for taking down of geyser of any capacity and servicing complete including replacement of thermostat, heating element, outer cover, top cover, base plate, copper tank, gun metal valve, safety nut and indicator light and refixing the same complete all as specified and directed .

Disconnecting electrical connection and taking out old unserviceable load line DB complete all as specified and directed.

S&F in replacement of factory made load line DB's double door made out of 2.15 CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 8 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB 4 pole 250 Amp,25KA as incomer & MCB SP 40/63 Amp of 10 KA capacity of 24 Nos as out going complete all as specified and directed.

Supply and fixing MCCB, 4 pole, 415 volt of capacity 250 amp, breaking capacity not less than 36 KA , Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc and connections, replacement of thimbles, minor parts like nuts bolts washer etc. all as specified and directed .

S&F electric bell AC 230 Volt complete all as specified and directed .

MRITUNJYA ASSOCIATES

M/S SONU ENTERPRISES

GLIBS CONSTRUCTION

JAIPAL AND BROTHERS

M/S ANIL KUMAR

M/s Navansh Engineers & Consultants

M/S Parshant Associates