REPAIR TO JOINERY, STEEL WINDOW, WIRE MESH, VENTILATORS FOR MD AND OTM ACCN UNDER AGE B/R-I AT ITARANA, ALWAR

Amount

Taking down shutter of any decription exc. 1 Sqm and n. Exc 2 Sqm each and refixing in same opening including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable scews etc. Note: Dismentling of old chowkat and S&F new chowkat shall be measured & paid for separately.

Taking down shutter of any decription exc. 1 Sqm and n. exc 2 Sqm each.

Taking down door chowkhats with shutter (without taking off shutters from frame) of area n exc 1.5 sqm each.

All as per item No 3.00 above but area exc 1.5 Sqm and n. exc. 4 Sqm each.

Taking down steel window/ventilators not exceeding 1.5 (without taking off shutter from frame including guard bars) any description.

Taking down steel window/ventilators exceeding 1.5 sqm but not exc 4 Sqm (without taking off shutter from frame including guard bars) any description.

Taking down cupboard shutters of any description exc 1 Sqm and n exc 2 Sqm.

Dismantling stone chowkhat of any description all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets.

S&F 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides ditto, but with particle board core.

M&L 35mm thick factory made plain framed, panelled door shutters klin seasoned & chemically treated second class hard wood (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I).The shutters shall be fitted to chowkhats as directed.

S&F 35mm thick 2nd class hard wood rail and style factory made glazed and skeleton door shutters,kiln seasoned and chemically treated second class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.The sizes of members of shutters as specified in SSR Part I, The shutters shall be fitted to chowkhats as directed.

S&F factory made steel window with side hung shutter and box type hinges steel handle and steel peg stay with glazing bars dovetailed or welded.

All as per item No 13.00 above but without glazing bars.

S&F factory made steel ventilator with top hung shutter with glazing bars including hings,steel peg stay etc complete.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, cooler stands (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor.

S&F 300mm long mild steel sliding door bolt, bolt type, stove enamelled black,with bright bolt 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate,fitted to shutters complete.

S&F in repair 300mm long mild steel sliding door bolt, bolt type, stove enamelled black,with bright bolt 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate, fitted to shutters complete.

S&F butt hinges, medium weight, cold rolled, mild steel,100mm long, fixed to angle iron chowkhats including welding complete.

M&L preparation to new or previously untreated steel surface of any description,over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chromate primer.

M&L preparation to new or previously untreated wooden surface of any description,over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F in repairs powder coated mild steel drapery rod of 20 mm inner dia (in lengths as directed) of approved colour with & including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/ beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.

S&F in repair PVC knob with PVC Coating 25mm dia wood finished type drapery rod,coloured as approved bt GE.

Cutting holes in brick walls Exc half brick but not exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar etc for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 TYpe B1 as required complete all as specified and directed.

Cutting holes in brick walls not exc Half brick built in cement mortar or cement lime mortar and stone walls built in lime mortar etc for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as specified and directed.

S&F 200 mm long Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed

All as per item No 26.00 above but in repair.

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed

All as per Item No 28.00 above but in repair.

S&F in repair 150mm Mild steel pressed handles, oval type, stove enamelled black.

S&F 150mm Mild steel pressed handles, oval type, stove enamelled black.

S&F exctruted aluminum alloy with galavanisied mild steel hing pin Butt hinges 100mm long

S&F aluminium handles cast type andoized of size 150 mm complete all as specified and directed.

All as per item No 33.00 above but in repair.

M&L mild steel, plain, black sheet in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets etc as required.

M&L framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or E-165.

M&L flat iron as in hold fast, hooks, cleats welded to angle iron door/window frames etc complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples

All as per item No 38.00 above but fixed in repair.

Hacking out old broken glass (any thickness size,quality or description)from wooden frames or stone, concrete or brick surroundings, and fixing new glass glazed with putty or fixed with beads. Note:- Sheet/figured glass will be measured and paid separately under supply only.

Supply only 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc.0.50 Sqm in each pane complete all as specified and as directed.

Supply only sheet glass,ordinary quality,4mm thick and glazing with oil putty in square n.exc.0.50 Sqm in each pane complete all as specified and as directed.

S&F only 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc.0.50 Sqm in each pane complete all as specified and as directed.

S&F only sheet glass,ordinary quality,4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.

S&F in repair 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of out of MS tube for top & bottam rail m.s frame shall be covered with heat moulded plain colour pvc 'c'channel having a pvc sheet stripp of 20mm width stuck inside with solvent cement for style & plain colour pvc sheet for top rail,lock rail & bottam rail on either side & as gap insert for top rail & bottam rail, pannelling of plain colour pvc sheet fitted in m.s frame welded sealed to the style & rail with suitable pvc sheet bedding,& jointed togather with solvent cement S&F in the frame at site as per specifaction & drawing.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and directed.

S&F solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F mild steel cupboard shutter with frame, Godrej pattern made out of 22 guage mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock vertical type size 65mm 4 lever with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12 mm dia bolt 150mm long grouted in brick wall/concrete including making good the disturbed surface as original complete all as specified and as directed. Note :- The measurement shall be taken of front elevation and not girthwise.

S&F powder coated anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F powder coated anodized aluminium door shutters, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as handles 2 Nos in each door, hinges type B-21 100mm long (3 Nos), complete all as specified & as directed.

S&F powder coated anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.

S&F powder coated of any colour as approved anodised aluminium grill of approved pattern for windows/ ventilators/doors complete all as specified and directed.

S&F brass mortice lock ,vertical type size 65mm ,4 levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified

S&F in repair brass mortice lock ,vertical type size 65mm ,4 levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified

S&F closed hydraulically regulated, designation No 3, aluminium (Die cast) body, universal type (ISI marked) complete all as specified and directed.

S&F in repair closed hydraulically regulated ,designation No 3, aluminium (Die cast) body,universal type (ISI marked) complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Demolition of brickwork built in cement mortar all as specified and directed.

M&L brick work with FLY ASH bricks, straight or curved on plan exc 6m radius, built in CM in 1:6.

M&L brick work with FLY ASH bricks, straight or curved on plan to any radius, built in CM in 1:4 as in half brick .

M&L rendering 15mm thick internal surfaces in cement mortar 1:6 on fair faces of stone masonry or concrete surfaces finished even and fair without using extra cement all as specified and as directed.

M&L applying two coats of distemper oil emulsion over 2mm thick wall care putty on newly plaster surface of walls complete all as specified and directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing the domolisd material out side of defence land all as specifed and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed

M&L 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as under floor tiles finished the surface even and fair complete all as specified and as directed by Engineer-In-Charge.

M&L coloured joint free non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm, as in floors etc, laid over and including 15mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L glazed ceramic coloured tiles(Ist quality) in vertical surface 450mm x 300mm x 7-8 mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement & sand mortar 1:4 complete all as specified and directed.

M&L false ceiling complete with Armgyp-FB ceiling tiles of size 595mm x 595mm x 9mm thick (as approved by GE) fixed with and including galvanised iron powder coated inverted 'Tee" or "L" section (Concealed GI frame Work) suspended from ceiling with provision of Galvanised wire 4mm dia and wall tapping screws including butterfly clips,hold down clips for fixing the board to frame complete all as per manufacturer's instruction,complete all as directed and specified.

M&L for repair to wooden shutter or rescuring or easing & adjusting without taking down shutter exc 1 sqm and n exc 2 sqm each.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for in this Schedule all as specified & directed.

Singh Associates

Akhil Enterprises

M/S Naglot Enterprises

M/s S Amarjit Singh