REPAIR TO FLOORING, PLASTERING, SANITARY, PLUMBING, SUNKEN PORTION AND OTHER CONNECTED WORK INCL GUNITING AND GROUTING IN ZONE-I AND ZONE-II AREA UNDER AGE B/R-II OF GE (I) KANPUR

Amount

Taking down cement plaster on brick or stone walls or ceiling etc including raking out joints hacking for key scrubing down with water etc complete all as specifed and directed.

M&L for 15mm thick rendering on fair faces of brick wall in CM (1:4) finished even & smooth. work shall be carried out upto triple storey height of building including necessary scaffolding, T&P, safety measures etc (Note WPC Shall be measured separately) complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of concrete or brick, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick cement plaster on ceiling in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastred surface of walls and applying two coat of exterior weather proof anti algae paint over and including a coat of primer. The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed. Work shall be carried out upto triple storey height of building including necessary scaffolding, T&P, safety measures etc.

M&L for preparation of newly plastered surface of walls and applying two coat of oil emulsion distemper/acrylic washable distemper over and including a coat of primer. The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed. etc complete all as specified and directed.

M&L preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articals complete all as specified and as directed.

M&L Brick work old size sub class ' B' bricks straight or curved in plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Brick work (except bricks) old size sub class ' B' brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for 25 mm thick PCC Type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as in leveling /sub base of flooring complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L for 400 x 400 mm Non skid ceramic coloured tiles of approved colour & 7-8 mm thick as in floors etc; fixed with spacers(Light weight plastic of 3mm size) and epoxy grouting of joints mixed with pigment to match the shade of tiles over screed bed complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450x300 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles, including 10mm thick rendering in CM(1:4) complete all as specified and directed

M&L for 600 x 600 mm size 8 to 10mm thick polished Vitrified Ceramic tiles of approved colour as in floors etc.fixed with spacers(Light weight plastic of 3mm size) and epoxy grouting of joints mixed with to match with shade of tiles screed bed complete all as specified and directed.

M&L for 600 x 600 mm size vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM (1:4) complete all as specified and directed.

Demolition of concrete in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defense land complete all as specified and directed.

M&L for cement concrete Type D2 (1:4:8) (using 40mm graded stone aggregate) as in foundations,filling and mass concrete complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path / plinth protection / sub base finished the surfaces even & fair complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type BO (using 12.5mm graded stone aggregate) as in floor finishing surface even and smooth with using extra cement complete all as specified and directed.

M&L for glass dividing stripes 3mm thick 38mm width inserted in position and conform to design, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and in consolidation complete all as specified and directed.

M&L for cement concrete Type B0 (1:2:4) (using 12.50 mm graded stone aggregate) as in edging portion of paver block for proper matching with existing surface complete all specified and directed.

M&L for 14 to 16 mm thick Granite (of approved colour ) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed .

Taking down Chowkhats or frames n. exc 1.5 sq. m with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and n exc 2 sqm each, easing , cutting and adjusting shutters and refixing in the same opening complete all as specified and directed.

S&F solid PVC Moulded door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet reinforced with MS Square tube edges will be painted to match with prelam sheet as per specification including making good the damaged wall with plaster or concrete complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face as per specification complete all as specified and directed.

S&F stainless steel butt hinges of size 100mm fixed to door shutter with SS screws incl. other necessary acessories complete all as specified and directed.

S&F 200mm stainless steel fancy handle of approved make fixed with SS screws etc. complete all as specified and directed.

S&F 200 mm stainless steel barral tower bolt of extruded section complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connection including cleaning for refixing or removal complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connection including cleaning for refixing or removal complete all as specified and directed.

Taking up or down 25 mm dia steel tubing and connection including cleaning for refixing or removal complete all as specified and directed.

M&L for cutting chases for concealed water tubing and making good in CM (1:3), cutting not exc 10 CM girth in brick wall complete all as specified and directed.

S&F GI steel tubing 15mm bore medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F GI steel tubing 20mm bore medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F GI steel tubing 25mm bore medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair 10 ltrs capacity low level PVC flushing cistern, valveless, symphonic type, white,with inlet, ball float and handle including brackets complete all as specified and directed.

S&F15mm bore PVC connection 600 mm long heavy duty with brass fly nut and warsher for hot and cold water complete all as specified and directed

S&F in repairs angle stop valve 15 mm bore of PTMT of any colour high pressure screwed for iron pipe and fixed (min wt 90 gms) complete all as specified and directed.

S&F in repairs Bib taps 15 mm bore standard of PTMT high pressure screwed for iron pipe and fixed (min wt 90 gms) complete all as specified and directed.

S&F in repair pillar tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm 110gms) complete all as specified and directed.

S&F in repairs 15mm bore stop valves,fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15mm bore bib taps fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete as specified and directed.

S&F in repair 15 mm dia brass chromium plated pillar tap fancy type with fly nut capstan head screwed for 15 mm dia pipe complete all as specified and directed.

S&F in repair angular stop valves, cast copper alloy, fancy type 15mm bore chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bore, brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repair 15 mm bore, brass CP sink mixer with regular swinging spout (wall mounted model) with connecting legs and wall flanges for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125 mm dia with swivel joint complete all as specified and directed.

S&F in repairs waste pipe for Sink/WHB/Urinal, length exc 0.75m complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440 mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified including S&F of trap set complete all as specified and directed.

S&F in repair vitreous chinaware EWC padestal type closet with white seat cover with flat bottom with hinging device including connection to long band "P" trap complete all as specified and directed.

S&F in repair Toilet paper holder, brass chromium plated, complete all as specified and directed.

S&F Soap dish, chromium plated incl fixing with connected accessories complete all as specified and directed.

S&F health faucet chromium plated suitable for 15mm dia pipe with 1.00 meter long SS flexible tube wall hook including making connection and fixed in position complete all as specified and directed

S&F in repair stainless steel jet with flexible extension (min 1m length) of 15 mm bore complete all as specified and directed.

S&F in repair 20mm dia Gun metal globe or gate valve with iron wheel head, screwd both ends for iron pipe complete all as specified and directed.

Dismantling PVC water tanks and remove to store capacity exc 250 Ltrs and n exc 500 Ltrs complete all as specified and directed.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.

Dismantling PVC water tanks and remove to store capacity exc 500 Ltrs and n exc 1000 Ltrs complete all as specified and directed.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.

S&F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod with high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair water tank cover capacity exc 250 ltrs and n exc 1000 ltrs complete all as specified and directed.

S&F in repair CP grating 125 mm dia round fixed on floor / nahani trap fixed with cement mortar complete all as specified and directed.

S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs stainless steel plate rack made out of 1mm thick stainless steel of overall size 750x900mm including fixing with brackets/clamps with screws pattern & design as approved by GE complete all as specified and directed.

S&F in repair glass shelf size (600X100) (glass thickness min 4 mm) with CP bracket and railing of approved quality complete all as specified and directed.

All as per item No 74 above but 3 layered complete all as specified and directed.

S&F Mirror cabinet (PTMT Alloy etc) complete all as specified and directed.

S&F in repair Towel rail 20mm dia, 60cm long brass chromium plated with brackets complete all as specified and directed.

S&F in repair Vitreous China half stall type white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repairs for vitreous china wash basin white flat back size 550x400mm but exclusive taps, wastes, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, waste pipe including brackets fixed in repairs complete all as specified and directed.

Dismantling of 75 to 100 mm dia CI pipes/fittings jointed in cement mortar fixed to wall or laid in trenches and taking out if required complete all as specified and directed.

Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 100 mm bore laid in floor/trenches complete all as specified and directed.

Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 100 mm bore laid on walls complete all as specified and directed.

S&F MS flat iron clamps with 50x5mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed.

Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 75 mm bore laid in floor/trenches complete all as specified and directed.

Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 75 mm bore laid on walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed.

S&F in repairs cast iron floor trap of 75 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B1 (using 12.50 mm graded stone aggregate) complete all as specified and directed.

S&F cast iron Floor trap 100 mm dia with CP grating including jointing to waste pipe with lead joint and fixed in cement concrete 1:2:4 type B0 (using 12.50 mm graded aggregate) complete all as specified and directed.

S&F cast iron branch pieces 100mm bore, single (equal or unequal ) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F cast iron branch pieces 75mm bore, single (equal or unequal ) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 100mm dia CI bend (any radius) with oval access door diminshing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75mm dia CI bend (any radius) with oval access door diminshing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F CI vent cowl of size 100/75 mm dia complete all as specified and directed.

Taking down 75 / 100 mm dia rain water pipes any pattern with all fittings complete all as specified and directed.

S&F (SWR) PVC Pipe 110 mm pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends 110 mm bore complete all as specified and directed.

S&F RANUR Silicone Self Adhesive Door Bottom Sealing Strip Guard for Home Door Protector for Home from Dust, Waterproof, Soundproof Door Seal complete all as specified and directed.

Dismantiling of loose concrete by chiselling from RCC members like col, beam, parapet, facia, ceiling and also remove any existing treatment on RCC surface by rubbing, scrapping etc exposing the reinforcement without disturbing the reinforcement and get free from rust by sand blasting providing at places addl reinforcement welding with existing reiforcement as directed wherever required binding with welded mesh 100 mmx100mm (12 gauge welded mesh) & tack welding and primed with using Araldite epoxy resins ( manufactured by M/s Ciba Geigy Ltd/ FAIR BOND EP/Sika or other approved manufacture) & provision of guniting pressure 2 to 3 Kg/Sqm with admixer 1 cement 3 sand mixed Dr fixit Pidicrete SC plasticiser (2 to 10% by weight of cement) of thickness 40mm average including stripping, floating with wooden strippers for proper dimension control inclusing necessary form work & scaffolding up to Three storey complete and surface of guniting to be finished fair and even with and including 10 mm thick plaster in cement mortar 1:4 with water proffing compound @3% by weight of cement, cleaning & removing of waste material etc as directed at site including necessary painting,white wash, distemper/ exterior acrylic emulsion).All surrounding wall, joineries and fitting should be covered with polythene sheet by contractor while work. (Any wall, floor,fittings and roof damaged by the contractor shall be repaired/change by contractor under same item and no extra payment will be paid to contractor on this account complete all as specified and directed. Note: Welded mesh & addl reinforcement if required measured and paid separately.

M&L for Mild steel TMT bar 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for welded steel wire fabric weight n exc 2 Kg/sqm complete all as specified and directed.

Taking up or down 40 mm dia steel tubing and connection including cleaning for refixing or removal complete all as specified and directed.

S&F GI steel tubing 40 mm bore medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete as specified and directed.

Supplying and Applying, two components acrylic polymer modified cementitious coating on new masonry surfaces devoid of plaster, with Hydrostatic resistance upto 5 bars with forced coverage of 1.75 Kg per Sqm in two coats using roller or brush with a gap of 4 to 6 hrs between the coats. The coats to be applied shall be perpendicular to each other complete all as specified and directed. Work shall be carried out upto triple storey height of building including necessary scafolding, T&P, safety measures etc complete all as specified and directed. Note : The Coverage is to be strictly maintained for film formation.

M&L for cement concrete (1:2:4) Type B0 (using 12.5mm graded stone aggregates) laid in slope towards drainage out spout pipe mixed with waterproofing compound as per manufacturer instructions drainage spouts shall be provided integrally while laying PCC. Fixing of spout shall be done with same PCC as in this item complete all as specified and directed.

M&L PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as required complete all as specified and directed.

M&L18 mm thick cement platster in CM 1:3 on vertical faces mixed with water proofing chemical complete all as specified and directed.

M&L for Preparation of plastered floor surface by cleaning surface free from dust and other foreign materials etc. and laying in repair Atatic poly propylene polymer modified membrane pre fabricated 3mm thick with non woven polyester matt central core of 160 gms/Sqm weighing not less than 3.5kg per sqm laid over primer conforming to IS 3384 @ 0.4 lit/sqm by using LPG/Butane torch and applying uniform pressure with a roller with overlap of 100mm in longitudinal direction and 150mm in transverse direction laid as per manufacturers instructions complete all as specified and directed.

M&L for grouting using polymer modified waterproof grout complete all as specified and directed.The detail procedure of inject grouting is as under: (i) Drilling of 12mm dia holes upto 40mm depth and provide PVC nozzles/ entry ports over grid@ 1m c/c or less depending upon situation. (ii) Before injecting the grout compressed air to be blown to remove all dist and dirt. (iii) Grouting atpressure of 5kg/sqcm to be don till refusal/ rejection or appearance of grout from adjacent nozzle. (iv) Observe the cracks and make V groove along. (v) Nozzles and V groove shall be filled with polymer based mortar.

ARORA BROTHERS (BID ID -3387041)

Khushi Muskan Engineer & Developer (BID ID -3388166)

Vee Key Enterprises (BID ID -3394397)

pk enterprises (BID ID -3390207)