CA NO CWE/CHM-75/2020-21 PROVN OF PARKING IN FRONT OF BLDG NO P-21, STORAGE ACCN FOR AGE B/R-I, II, BSO AND ONE ROOM WITH CGI SHEETS AND FALSE CELING ALONGWITH TWO TOILETS AT STATION BAKERY OF 359 COY ASC (SUP) AT CHANDIMANDIR

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for foundation ,etc and getting out in hard/dense soil complete all as specified and as directed.

M&L for P.C.C 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in in CM 1:6. complete all as specified and as directed

Returning, filling in, including spreading, levelling , watering, and well ramming in layers n.exc 25 cm thick complete all as specified and as directed.

M&L for spreading and leveling n.exc 25cm thick incl well ramming incl watering complete all as specified and directed by Engr-in-charge.

M&L for 40mmthick damp proof course in cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces incl neessary formwork complete all as specified and as directed.

Supply only water proofing compound (WPC) complete all as specified and as directed.

Removing excavated material (Soil) to a distance n. exc 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed.

M&L for Hard core of gauge n exc 63mm thick of broken boulder spread leveling watering ramming to true surface complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick P.C.C 1:4:8 type B-2 using 40mm graded stone agg as in sub base of floor complete all as specified and as directed

Material and labour for glazed ceramic tiles, coloured, in vertical surfaces350X250X7mm/450X350X7mm thick , first quality, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tile over and including10 mm thick bedding layer in CM 1:4 complete all as specified and directed

M&L double charged/ultra charged (dark shed) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed cement to match complete all as specifed and as directed.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:6 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for two coats of cement base paint on plastered surface,including preparing new surface complete all as specified and as directed.

M&L For Preparing new plastered surfaces and applying wall care putty, not less than 2mm thick over a coat of primer incl smoothening the surfaces with sand papers etc, and applying two coats of OBD complete all as specified.

M&L for 75mm thick PCC 1:3:6 type C2 as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

S&F vitrous China wash hand basin white flat size 550x400mm incl bracket cutting for and pining in ends of brackets or erecting stand but exclusive of fixing of Waste pipe. complete all as specified and directed by Engr-in-Charge.

S&F Vitreous china wash down water closet pan (Pedesal patlern) white. with seat cover (excl fixing bolt, flushing cistern and flush pipe fixed).

S&F low level flushing cistern, valve less Symphonic action type 10 Ltr Cap with inlet valve flot and handle incl bracket. complete all as specified and directed by Engr-in-Charge.

S&F CP Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed by Engr-in-Charge.

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.

S&F soap dish vitreous chinawhite, approximate size 160x160x90mm embeddedin the wall.complete all as specified and directed by Engr-in-Charge.

S&F brassTubular towel rail 20mm dia complete all as specified and as directed by Engr-in-Charge.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engr-in-Charge.

S&F 15mm bore CP angle valves fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipes or unions and fixed.

S&F 15mm bore bib tap Chromium Plated fancy type cast copper alloy with crutch or butterfly hadle, screwed down, screwed for iron pipe or for brass ferrule.

S&F for waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms)

S&F PVC connections 15mm size with PTMT nuts of length 600mm

S&F PVC connections 15mm size with PTMT nuts of length 450mm

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F 15 mm GI tubing medium grade with allfittings fixed complete to walls and ceilings or laid in floors all as specified and directed by Engr-in-Charge.

M&L PVC (SWR) gully trap 125/110 mm setting and jointing with solventcement complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in tenches or in floors complete all as specified & directed.

S & F 110 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in tenches or in floors complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends any radiuscomplete all as specified and directed.

S & F 110 mm bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and directed.

S & F PVC (SWR) 110 mm bore vent cowl complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F 60mm thick puf wall panel comprising of following specification:- (a) PUF Panel shall be made of 0.5mm thick pre coated GI skin outer walls filled with PUF of thickness 58.74mm with density 44 Kg/Cum +/- 10% Kg/Cum. The overall thickness of PUF panel should not be less than 60mm. (b) The outer and inner colour coated (RAL-1001) GI skin made from hot dipped galvanized steel or the panels should be 0.5 mm thick TCT (Total coated thickness). Each panel should be supplied pre-painted with a colour coating of 50 microns of architectural polyester on a minimum 120 GSM base of zinc coating on the finished surface only for protection against scratches during handling and transportation. Base metal of GI skin CRCA should be as per IS-513 CA and grade of zinc coating will be 175 as per IS-277. (c) The pre coated GI sheet skin should have min coating of 4.5 micron epoxy primer and 25 micron polyester top coat on the finished surface and 7-8 micron primer Alkd Backer on backside which is bounded to the polyurcthane foam. The pre coated GI sheet should conform to IS 14246-1995 with manufacture test certificates conforming to specification. Base metal of GI skinned CRCA sheet should be as per IS-513 and galvanization as pr GR-120 as per IS-277. d) These panels are to be manufactured using high pressure dispensing machine of required capacity to inject specified amount of PUF chemical into the cavity of a full panel in one shot not exceeding 25 sec duration. This is to ensure that the liquid PUF mixture is sprayed into the cavity before the foaming reaction starts so that the insulation core of the panels is formed in one piece and provides desired structural and physical properties. The bulk density of insulation should 44 +/- 10% Kg/m3 made from CFC free close cell polyurcthane form and the dispensing machinery should be kept with a PLC controlled panel for monitoring and controlling the injection rate to assure specified uniform density requirements. The total thickness of the finished composite panel should not less than 60.0mm. (e) The PUF insulated core of these composite panels should have the following properties :- (i) Density 44 +/- 10% Kg/m3 (ii) ‘U’ valve of external walls will not exceed 0.35 (+) 5% W/m2k. (iii) Flammability B2 DIN 4102 Pt I. (iv) Blowing agent (non CFC) – R- 141B. (v) External colour of PUF panels would be RAL – 1001 & inner colour would be off white. (vi) Compressive strength at 10% deformation – 2.1 Kg/Cm2

S&F 50mm thick PUF panel false ceiling made 48.73mm PUF sand whiched between 0.5mm thick CRCA sheets duly powder quoated of colur on approved of GE placed on inverted MS Tee Section (MS Tee Section) measured against ser item of BOQ will be measured and paid separately, Tee section will be placed perpendicular to truss at the distance of 1.0mtr c/c) comprising of Make of PUF Panel item No 44 & 45). M/s Modern Prefab system pvt ltd, m/s jindal buildgs limited, m/s lloyd insulations (india) ltd, M/s bnal prefab pvt ltd, Jindel, Meltek, Sintex, ACME, ACE Builders & Enginers & tat etc or as per approved by GE

M&L powder coated (minimum coating of powder coating not less than 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F aluminium deco grill of approved design by GE complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Supply and fixing 200mm aluminium anodized barrel tower bolt (ISI Marked) of extruded section fixed as in repair complete all as specified and directed

Supply and fixing aluminum alloy, anodized, sliding door bolt (ISI Marked) 250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy, fixed complete all as specified and directed.

Material and labour for 150mm size aluminum handle (ISI Marked) cast type anodized, fixed as in repair complete all as specified and directed.

S&F aluminium Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F 25mm PVC coated fancy type MS curtain rod with bracket and necessary fittings complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of steel and Iron surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromeprimer complete all as specified and directed.

M/L for precast kerb stone in 1:2:4 type B1 using 20mm graded stone aggregate (size 300x300x100mm) one edge rounded or chamfered set and jointed in cement mortar 1:4 fixed in position including necessary excavation complete all as specified and directed.

M&L factory made rubber moulded colored Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L sand filling under floor complete all as specified and as directed

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in copings, kneelers, apex stones, bed plates, kerbs not provided, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary formwork complete all as specified and as directed.

Material & labour Chequered cement concrete tiles 20cmx20cmx25mm thick, set jointed and pointed in neat cement slurry in floor with grey cement and pigment over and including 15mm screed in CM 1:6 complete all as specified and directed by Engr-in-charge.

M&L for rough finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exce 200 mm thick complete all as specified and as directed.

Reinforced Cement Concrete Type M-25 (using 20 mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings and in shelves and the like complete all as specified and as directed.

S&F Mild steel TMT bars 10 mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and directed.

S&F Mild steel TMT bars 5 mm dia, and over up to 10mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, MS wire as in stirrups, spacers & binders etc complete all as specified and directed.

Material & labour for reinforced cement concrete M-25 using 20mm graded stone aggregate as in foundations raft footings beams, plinth beams, bases of columns and mass concrtet complete all as specified.

M&L fo rough finished flat form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc complete all as specified and as directed.

M&L For Preparing new plastered surfaces and appling three coats of white wash on new plastered wall surfaces complete all as specified.

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type B-21 complete all as specified and as directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F steel ventilators with top hung shutters including hings, steel peg stay complete all as specified and as directed.

S & F 4 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe- 410 complete all as specified and directed.

S&F plain framed factory made panelled shutter using 2nd class hard wood 35mm thk (two panel) with lock rail and panel of 12mm BWP commercial venner on both side. The size of rail and stile as per IS-10032 Pt-I complete all as specified and directed.

S&F 35mm 2nd class hard wood, glazed & skeleton shutters, open rebated & prepared to receive glass, guage etc, edge of raming plain, chamfered as rounded fitted with cut and mitered beads for securing etc complete all as specified and directed.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl laid over incl 15mm thick screed bed in CM (1:4) in skirting/dado all as specified & directed.

Supply and fixing factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain PVC sheet reinforced with MS squared tube, fixing in opening at site all as specified & directed.

Supply and fixing factory made steel windows (Box type) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays and 12X3 mm flat iro for fixing wire gauge etc including hold fast and one shop coat of red oxide zinc chrome primer, fixed as in repair complete all as specified & shown in drawings complete all as specified and directed.

Supply and fixing factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including hold fast and one shop coat of red oxide zinc chrome primer, fixed as in repair complete all as specified & shown in drawings.

M&L for rough finished flat form work to edges of concrete flats, treads, breaks infloors, window cills, concrete railings, openings in concrete walls floor and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or slopping and similar work etc complete all as specified and directed complete all as specified and directed.

Reinforced Cement Concrete Type M-25 (using 20 mm graded stone aggregate) for chajjas complete all as specified and directed.

Reinforced Cement Concrete Type M-25 (using 20 mm graded stone aggregate) for Beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and directed.

Reinforced Cement Concrete Type M-25 (using 20 mm graded stone aggregate) for Columns, pillars and struts complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 20mm graded stone agg) as in surface channel, drain and manhole including finishing complete all as specified and as directed by Engr-in-charge complete all as specified and directed.

M&L for providing precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) as in cover slab for manholes & septic tanks with plane face set in CM (1:6) complete all as directed by Engr-in-charge.

M&L for 150mm bore salt glazed stone wareand jointed complete all as specified and as directed by Engr-in-charge.

M& L for PCC 1:4:8 type D-2, (using 40mm graded stone aggregate) as in bed of drain for 150mm bore pipe incl packing under , and haunching against the sides of the pipes after they are laid in and tested complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate in benching of manhole etc. complete all as specified and as directed by Engr-in-charge.

Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M & L for 40 mm thick PCC 1:2:4 type B1, 20 mm graded stone aggregate as in flooring finish even and smooth without using extra cement. complete all as specified and directed by Engr-in-Charge.

S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-charge.

M&L for preparation of steel surfaces of any discription n. exc 10cm width or girth when unconnected with other painting & applying two coat of synthetic paint enamel over a coat of red oxide after preparation of new iron/steel surfaces all as specified and directed by Engr-in-Charge.

S&F 20 mm GI tubing medium grade with all fitting laid in trenches complete all as specified and directed.

S&F Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed of size 25 mm bore dia of pipe complete all as specified and as directed by Engr-in-charge.

S&F for ball valves high pressure 25mm bore of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed by Engr-in-charge.

S&F Rotational moulded polyethlene water storage tanks of capacity 1000ltr(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed by Engr-in-charge.

M&L for point wiring with PVC insulated unsheathed FRLS 1100 volts grade single core multi stranded copper conducter cables of size 1.5 Sqm for phase & natural in and including concealed PVC conduits (except beam, column, roof, iron structure etc) sheet steel sunken boxes 1.2mm thickness covered including with 3mm thick plastic laminated sheet for mounting switches, sockets, regulator etc and including 1.5 Sqm copper conductor PVC insulated and unsheathed multi stranded green cable as earth wire for one light point/buzzer point controlled by one switch complete all as specified and directed (uint rate quoted including cutting chase wall/floor/PCC and making good the disturbed surface to match with the original. Nothing extra shall be paid on this account).

All as per item No 106. Above but for one socket outlet 3 pin, 5 Amps on the same board complete all as specified and directed.

All as per item No 106. Above but for one socket outlet 3 pin, 5 Amps on the independent board complete all as specified and directed.

All as per above item No 106 but for one socket outlet 3 pin 15 Amps on independent board using cable of size 2.5mm for phase & neutral and 2.5mm Sqmm as earth wire.

S&F Switch piano, flush type single pole, 230 volt one way 5 Amp all as specified and directed.

S&F switch piano flush type, single pole, 230 volt one way, 15 AMPs all as specified and directed.

S&F socket out let 2 in 1, 3 pin 5 Amps, ISI marked, 230 Volts complete all as specified.

S&F socket out let 2 in 1, 3 pin 5/15 Amps, ISI marked, 230 Volts complete all as specified and directed.

S&F ceiling rose 6 Amps three terminals complete all as specified and directed.

S&F LED CRCA batten with decorative end cap complete with and including retrofit polycarbonate /glass tube 20watt capacity 4 feet long & white light and incl connectioin from ceiling rose complete all as specified and directed.

S&F LED CRCA batten with decorative end cap complete with and including retrofit polycarbonate /glass tube 10watt capacity 2 feet long & white light and incl connectioin from ceiling rose complete all as specified and directed.

S&F LED lamp 9 watt capacity complete all as directed.

S&F Lamp holder, 6 Amps 240 volts insulated body with metal ring complete all as specified and as directed.

S&F bulk head fitting in engineering plastic housing withmclear prismatic diffuser 6 watt capacity.

S&F MCB DB with provision for incoming 2 pole (MCB/isolator) and single phase outgoing suitable for surface and flush mounting, IP 43 pritection, double door of metal 12 way all as specified.

S&F S&F MCB SPN 63 Amps 240 volts having breaking capacity 10 KA "C" characaterstic all as specified & directed.

S&F S&F MCB SPN 40 Amps 240 volts having breaking capacity 10 KA "C" characaterstic all as specified & directed.

S&F MCB SP 6 to 32 Amps 240 volts having breaking capacity 10 KA "C" characterstic all aspspecified & directed.

S&F exhaust fan metalic body 300mm sweep 900 rpm complete with louver shutter including making good to the disturbed surface all as directed.

S&F ceiling fan 1400mm sweep 240 Volts all as specified and directed.

S&F recess mounting LED ulter slim ceiling light with extruded aluminium housing and milky diffuser 45 watt capacity and size 2'x2' including making all connectioins complete all as directed.

Sub main wiring (with approved colour as per IS) with two single core 4 Sqmm FRLS PVC insulated multistranded copper conductor cable 1.1 KV grade ( two runs of main cable) alongwith one run of single cable core 4 FRLS PVC insulated flexible starnded copper conductor 1.1 KV grade of earth for earthing complete all as specified and directed.

S&F sheet metal enclosure for DBs flush mounted suitable for 2 way SPN complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, surrounded by mixture of charcol and salt in alternate layer buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to and including bGI strip 32x6mm by m,eans of bolts , nuts check nuts and washers of galvanised steel and inclusive of 40mm dia GI light grade pipe for protection of GI strip to the extend of 7.5 mtrs as earthing lead and connecting to the eqpt/test point where required including charcole dust and salt packed all around the earth plate in the earth pit all as per electrical plate No. 05 of SSR part-I including chamber made of PCC 1:2:4 type B1 with MS angle iron frame, PCC cover and 20mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement complete all aspspecified and directed.

M&L making opening for fixing exhaust fan 300mm sweep andmaking good to the disturbed surface all as directed by Engineer-in-charge.

Supply and laying well burnt bricks, Sub class "B" bricks laid breath wise along length of cable in trenches for cable protechtion laid for UG cable protection all as specified and directed.

M&L for sand cuishioning for protechtion of cable (below, above and arround the cable laid in trenches) all as specified and as directed.

Supply laying and testing cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sq mm 3 1/2 core complete all as specified and directed.

Supply installation testing and commisioning of out door type LT feeder pillar box CPRI approved openable from front & rear double door type dust and vermin proof , fabricated out of 3.15 mm CRCA sheet of size 0.75x.5x.5 dully painted with two coats of synthetic enamel paint over a coat of red oxide primer and MS channel frame of ISMC 75 at base of panel only and 04 Nos legs of not less than 50cm long each below the base of panel made of angle iron 50x50x6mm for grouting purpose and grouted in PCC 1:2:4 type cB1 (using 20mm grded stone aggregate) alongwith incoming MCCB four pole, 415 Volts 256 KA, 50 Hz, 100 Amps-01 Nos including 04 Nos heat shrink insulated aluminium bus bar of current carrying capacity 1.5 times of incomming MCCB suitable for 4 Nos outgoing 25 Sqmm to 35 Sq mm 3.5/4 core XLPE armoured cable complete all as specified and as directed by Engineer in Charge.

M&L providing earthing complete with galvanised steel platess of size 600x600x6m thick burried directly in gound in a earth pit not less than 2.25mtr deep below ground level with the top edge of the earth plate at a depth not less than 1.5 mtr below ground level, connected to and including galvanised iron stripof size 32mmx6mmearth strip by means of nut bolts check nutsand washers and connected to earth test point connected to earth point/ transformer/ panel/ feeder pillar box all as specified and directed by Engineer -in- Charge including necessary earth work in any type of soil, disposal of surplus soil not exceeding 50 m (the rate also includes for cost of charcoal & salt in alternative layers of 15cm, thickness, providing suiltable size of GI pipe (medium grde) for watering , funnel, wiremesh , connected PCC chamber (1:3:6) type C1, RCC pit cover, charcoal, salt including provision of earth lead protected by 40mm dia light grade GI pipe and 20mm medium grade GI pipe for watering complete all as specified.

PARVEEN KUMAR AND SONS

Vasudeva Trading Co.