REPAIR, MAINT AND REPLACEMENT FOR PERIMETER LIGHT, STREET LIGHT, FLOOD LIGHT, HIGH MAST LANTERN, HIGHWAY LIGHTS FLP LIGHT, NATURE SWITCH AND MISC CONNECTED WORKS AT AF STN MOHANBARI UNDER GE(AF) MOHANBARI

Amount

Comprehensive periodical servicing, repair, maint on monthly basis (minimum twice in a month) visting the site of AFS Mohanbari for smooth proper functioning of the street / flood / High bay lights / Post Top lamp / wellglass fittings of approx qty 600 Nos located at any height of pole / walls/ any location complete including checking, dismanteling , servicing, cleaning, removing dust or dirt and repairing of fittings by replacing defective parts for the trouble free and efficient functioning and testing complete all as specified and directed by the Engr-in- charge. Note: LED Drivers, Surge protection device, FR PVC cable for connection, GI brackets etc shall be measured and paid seperately under relevant items No 2 to 14 here-in-after. (ii) Minor parts like insulation tape, cotton waste, nuts, screw etc shall be deemed to be included in the item quoted rates.

Supply only 10 KV surge protection device for LED street light, 230 volts, 50 HZ compatible for industrial & outdoor LED Fixtures higher capacity for fixing in repairs complete all as specified and directed by Engineer-in-Charge.

Supply only 5 KV surge protection device for LED street light, 230 volts, 50 HZ compatible for industrial & outdoor LED Fixtures for fixing in repairs complete all as specified and directed by Engineer-in-Charge.

Supply only Drivers for LED street lights / well glass fitting 35W to 60 W, 230 Volts, 50 HZ complete all as directed and specified by Engr-in-charge. Make: Crompton Code No S0DVEXC4-36W-700 or equivalent in Philips/ surya/ Bajaj/ Havells

Supply only Drivers for LED Flood light fitting / High Bay light 70W/80W, 230 Volts, 50 HZ complete all as directed and specified by Engr-in-charge. Make: Crompton Code No DRVP-75W/700 or equivalent in Philips/ surya/ Bajaj/ Havells

Supply only Drivers for LED street lights / Flood light fitting 90W/100W, 230 Volts, 50 HZ complete all as directed and specified by Engr-in-charge. Make: Crompton Code No S0DVEXC1-50W-700 or equivalent in Philips/ surya/ Bajaj/ Havells

Supply only Drivers for LED Street light fitting / High Bay light 120W / 150 W, 230 Volts, 50 HZ complete all as directed and specified by Engr-in-charge. Make: Crompton Code No DRVP-150W/700 or equivalent in Philips/ surya/ Bajaj/ Havells

Supply only Drivers for LED Flood light fitting 120W, 230 Volts, 50 HZ complete all as directed and specified by Engr-in-charge. Make: Crompton Code No DRVP-120W/700 or equivalent in Philips/ surya/ Bajaj/ Havells

Supply only Drivers for LED Post Top Lantern 40W, 230 Volts, 50 HZ complete all as directed and specified by Engr-in-charge. Make: Crompton Code No S0DQL-54-700-40W or equivalent in Philips/ surya/ Bajaj/ Havells

Supply only GI Bracket for mounting of Street lights made out of 40 mm GI pipe medium grade 1.5 meters in length bend in shape as required including necessary MS flat iron clamps, nuts and bolts etc complete all as directed and specified by Engineer in charge.

Supply only GI Bracket for mounting of Street lights made out of 25 mm GI pipe medium grade 1.5 meters in length bend in shape as required including necessary MS flat iron clamps, nuts and bolts etc complete all as directed and specified by Engineer in charge.

Supply only 1100 Volts heavy duty round sheathed multistranded three core copper conductor cable of size 1.5 Sqmm for electrical connections to the street lights fittings complete all as specified and directed by Engineer-in-Charge.

Supply only 1100 Volts heavy duty round sheathed multistranded three core copper conductor cable of size 2.5 Sqmm for electrical connections to the street lights fittings complete all as specified and directed by Engineer-in-Charge.

Supply only 1100 Volts heavy duty round sheathed multistranded Five core bright annealed copper conductor cable of size 2.5 Sqmm for electrical connections to the high mast lights fittings complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs of LED street light fitting 35 / 36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp, surge protection device and corrosion resistant including thermal management complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge. Make : Crompton Cat Part No TRP – 400-35-57-SL –LM-NSR / Philips Cat Part No BRP046 LED 36 CW MR S1 PSU GR or equivalent in GE / Wipro

Supply and fixing in repairs of LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp , surge protection device and corrosion resistant including thermal management complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge. Make: Crompton Cat Part No CRP-409-60-57-SL-GL-NSG / Philips Cat Part No BRP062 LED 65 CW SLA S1 PSU or equivalent in GE / Wipro

Supply and fixing in repairs of LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp , surge protection device and corrosion resistant including thermal management complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge. Make : Crompton Cat Part No CRP – 411-90-57-SL-GL–NSG / Philips Cat Part No BRP410 LED 091 CW HE MR PC S2 PSU GR or equivalent in GE / Wipro

Supply and fixing in repairs LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp, surge protection device and corrosion resistant including thermal management complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge. Make : Crompton Cat Part No LSTP-120-CDL-M / Philips Cat Part No BRP 340 LED 138 CW HO SLC S1 PSU GR or equivalent in GE / Wipro

Supply and fixing in repairs of LED flood light 70 watt 230 V AC outdoor type with thermal management with IP66 protection and corrosion resistant complete with driver, surge protection device and lamp complete all as specified and directed by Engineer-in-Charge. Make : Crompton Cat Part No LFL-70 CDL/60-M / Philips Cat Part No BVP120 LED 70 CW FG S1 PSU GR or equivalent in GE / Wipro

Supply and fixing in repairs of LED flood light 100 watt 230 V AC outdoor type with thermal management with IP66 protection and corrosion resistant complete with driver, surge protection device and lamp complete all as specified and directed by Engineer-in-Charge. Make : Crompton Cat Part No CFS-504-100-57-60D-SL-GL-NSG / Philips Cat Part No BVP192 LED110 CW HO NB FG GR PSU or equivalent in GE / Wipro

Supply and fixing in repairs of LED flood light 120 watt 230 V AC outdoor type with thermal management with IP66 protection and corrosion resistant complete with driver, surge protection device and lamp complete all as specified and directed by Engineer-in-Charge. Make : Crompton Cat Part No LFLN-120-CDL/60-M / Philips Cat Part No BVP122 LED124 CW HE AK55˚ FG XTFCL S4 or equivalent in GE / Wipro

Supply and fixing in repairs LED flood light 200 / 210 watt 230 V AC outdoor type with thermal management with IP66 protection and corrosion resistant complete with driver, surge protection device and lamp complete all as specified and directed by Engineer-in-Charge. Make : Crompton Cat Part No LFLN-200-CDL/60-M / Philips Cat Part No BVP410 LED 215 CW HE NB FG S4 XTFCL or equivalent in GE / Wipro

Supply and fixing in repairs of LED Post Top lantern 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection and corrosion resistant complete with driver, surge protection device and lamp complete all as specified and directed by Engineer-in-Charge. Make : Crompton / Philips /GE

M&L for repairing and rewinding of High mast motor of capacity upto 3 HP/2.4 KW of any make/model, including removal of existing burnt windings completely and carefully from the slots, cleaning the slots thoroughly with necessary cleaning agent, applying slot insulation and rewinding with super enameled copper wire of existing guage complete including dismantling and re-assembling of starter, rotor, blades etc all as specified and as directed by the engineer-in-charge. Note:- (Rate is inclusive of transportation to and fro from MES store/site to civil workshop.

Supply and fixing in repairs of MCCBs 63 Amps 4 pole, 415 V breaking capacity 16 kA , thermal magnetic release including spreader terminals for easy operation and connection complete all as specified.

Supply and fixing in repairs of MCCBs 100 Amps 4 pole, 415 V breaking capacity 16 kA , thermal magnetic release including spreader terminals for easy operation and connection complete all as specified.

Supply and fixing in repairs of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and capacity 10 to 32 Amp complete all as specified.

Supply and fixing in repairs of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and neutral and capacity 10 to 32 Amp complete all as specified.

Supply and fixing in repairs of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of Triple pole and capacity 40 to 63 Amp complete all as specified.

Supply and fixing in repairs of LED Wellglass luminaire 40 watt 230 volts with high efficacy, IP 66 protection including prewired set and corrosion resistant complete with driver, surge protection device and lamp complete all as specified and directed by Engineer-in-Charge. Make : Crompton Cat Part No CIP-311-40-57-HL4-CP-NSG / Philips Cat Part No BY201P LED 78S CW PSU HE PC or equivalent in GE / Wipro

Supply and fixing in repairs of LED Aviation light luminaire having die-cast aluminium housing with polycarbonate enclosure, driver and LEDs connected in series and parallel combination with better heat dissipation 240 Volts, IP -65 with all accessories complete all as specified. Make : BAJAJ cat part No BGAV 302 LED / equivalent in Phillips / Wipro / GE /Crompton

Supply and fixing in repairs of LED round Highbay luminaire 80 watt 230 volts with high efficiency, IP 66 in PDC housing suitable for induastrial applications including prewired and corrosion resistant complete with driver, surge protection device and lamp complete all as specified and directed by Engineer-in-Charge. Make : Crompton Cat Part No LHB11-80-CDL/60-HPM / Philips Cat Part No BY415P LED 145S CW HE NB FG PSU GR XTFCL S5 or equivalent in GE / Wipro

Supply and fixing in repairs of LED round Highbay luminaire 120 watt 230 volts with high efficiency, IP 66 in PDC housing suitable for induastrial applications including prewired and corrosion resistant complete with driver, surge protection device and lamp complete all as specified and directed by Engineer-in-Charge. Make : Crompton Cat Part No LHB11-120-CDL/60-HPM / Philips Cat Part No BY415P LED 160S CW HE NB FG PSU GR XTFCL S5 or equivalent in GE / Wipro

M&L for cleaning the swaged steel tubural street light pole 9 / 11 meters height including GI pipe of street light fitting and prepare surfaces cleaning including scrapping up of old corroded paint dirt/dust/ rust carefully and applying two coat of aluminium paint and marking of zebra crossings up to a height of 1.5m above the coping with blue and white strips of synthetic enamel paint including writing of pole numbers and two coats colour washing of PCC coping complete all as specified and directed by Engineer-in-Charge.

M&L for cleaning the pre-stressed cement street light pole 9 / 11 meters height preparing surfaces plastered or unplastered old surfaces and applying two coat of cement based paint over one coat of primer including writing of pole numbers two coats colour washing of PCC coping complete all as specified and directed by Engineer-in-Charge.

Dismantling of old unserviceable steel tubular/MS poles of any size and type complete with insulators and cross arms of M.S Chanel or angle section complete and setting aside for reuse with in 50m including breaking of PCC foundation of pole after necessary earth work and returning filling of soil complete all as specified.

Dismantling of old unserviceable concrete poles of any size and type complete with insulators and cross arms of M.S Chanel or angle section complete and setting aside for reuse with in 50m including breaking of PCC foundation of pole after necessary earth work and returning filling of soil complete all as specified.

Supply and fixing in repairs Steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.00 metres long) including dismantaling of old Unserviceable pole including demolition of existing concrete complete all as specified and directed by Engineer-in-Charge. Note : Excavation, earth work and PCC Work will be measured and Paid Seperately in relavant items.

Material and Labour for repairs of stay assembly with accessories as shown in electrical plate No.1 of SSR Part - I specifications complete with diameter of stay Rod 20 mm inclusive of loop type insulators, stay clamps including dismatling of old unserviceable stay assembly , loop insulators, stay rod including demolition of existing concrete complete all as specified and directed by Engineer-in-Charge. Note :- Excavation , earth work and PCC work will be measured and paid seperately in relevant items.

Supply and fixing in repairs of LED light fitting 1 x 16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light, driver, holders, connector complete with all accessories prewired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge Make CROMPTON GREAVES cat part no. EXTN1LT8-16/20 or equivalent of BAJAJ/ SUDHIR

Supply and fixing in repairs of LED light fitting 2 x 16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light, driver, holders, connector complete with all accessories prewired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge Make CROMPTON GREAVES cat part no. EXTN2LT8-16/20 or equivalent of BAJAJ/ SUDHIR

Supply and fixing in repairs of LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge Make Crompton Catpart no LDL-20-CDL or eqivalent in Philips/GE

Supply and fixing in repairs of LED lights fitting 1x 10 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge Make Crompton Catpart no LDL-10-CDL or eqivalent in Philips/GE

Supply and fixing in repairs LED retrofit tube, 18/20 watt, 230 Volt, 50 Hz, LED T8 tube with extruded Al body, PC diffuser and inbuilt driver double sided connection including necessary connection complete all as specified and directed by Engineer-in-charge. Make Crompton Catpart no LTT8-20 or eqivalent in Philips/GE

Supply and fixing in repairs Switch flame proof rotary type with termination box in LM6, 16A, single pole 230V complete all as specified.

M & L for repairs/ replacement of Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers,welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete including dismantling old unserviceable cross-arms of M.S. channel or angle sections etc.all as specified and directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for trenches for laying underground cables, poles, stay assemblies,pipes and getting out in Soft/Loose Soil complete all as specified and directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for trenches for laying GI pipes, cables, pole, stay used for cable protection and getting out in Hard /Dense Soil complete all as specified and directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m but not exc 3.0 m in depth for foundation, etc. or for trenches for laying underground cables, poles, stay assemblies,pipes and getting out in Soft/Loose Soil complete all as specified and directed by Engineer-in-Charge.

Returning/ filling including spreading, levelling and well ramming in layers not exc 25cm in thick complete all as specified and directed by Engineer-in-Charge.

Removal of surplus soil to a distance not exc 50 m away and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for boring/ drilling (horizontally) hole manually under existing road, pavement, hard standing (maximum 10mtr in width) suitable for passing GI tubing upto 40 mm bore complete all as specified and directed.

Supply and spread sand in cable trenches and providing cushioning for the cable complete all as specified and directed by Engineer-in-Charge. Note:- Only punned thickness of 18cm will be measured for the purpose of payment.

Supply and laying burnt brick sub class 'B' of size 230 x115 x75mm for protection of cable, laying in trenches including taking out old complete all as specified and directed by Engineer-in-Charge.

Supply and laying Pipes in repairs galvanized iron Light grade for cable protection of size 25 mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and laying Pipes in repairs galvanized iron Light grade for cable protection of size 40 mm bore complete all as specified and directed by Engineer-in-Charge.

Taking out old serviceable/ unserviceable cable of size 2/4 core, up to 16 sqmm of any make/ type and keeping aside for the purpose of rerouting/ relaying in new location/ for requisite replacement/ further disposal complete including taking out bricks complete all as specified. (Note: Earth work shall be measured & paid separately).

Material and Labour in repairs LT UG cable of size 2 core 10 Sqmm aluminium conductor XLPE insulated and sheathed armoured , heavy duty 1100 volts in trenches/poles/surface and connecting with all accessories complete all as specified and directed by Engineer-in-Charge.

Material and Labour in repairs LT UG cable of size 4 core 16 Sqmm aluminium conductor XLPE insulated and sheathed armoured , heavy duty 1100 volts in trenches/poles/surface and connecting with all accessories complete all as specified and directed by Engineer-in-Charge.

Re-laying of serviceable (as obtained from taking out) cable of size 2/4 core up to 16 sqmm of any make/ type inclung making electrical connection complete all as specified. (Note: Earth work shall be measured & paid separately).

M&L for Straight through joint suitable for cable size 4 core 6 sqmm to 16 sqmm LT UG cable with necessary jointing materials and ferrule including cutting unserviceable portion of cable complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs of 3 pole power contactor with AC Coil of capacity of 32 Amps AC 3 three phase heavy duty complete all as specified. Make: Havells Cat No IHPHA032210* or equivalent in L & T, Siemens , Schneider.

S & F in replacement of automatic nature timer( based on lux level of natural light) based street light panel single phase, 8-10 kW, IP 66 with in built nature switch, power contactor, incoming & outgoing 63 A SP/DP MCB, pole/ wall mounted type, thermoplastic polymer weather proof enclosure, internal connecting cables complete all as specified and directed. Make: Nature Switch / Havells / Legrand or as approved by GE.

Material and Labour for PCC 1:3:6 type C2 using 40 mm graded stone aggregate for foundation of poles,Stay etc complete all as specified and directed by Engineer-in-Charge.

Material and Labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate for foundation of poles,Stay etc complete all as specified and directed by Engineer-in-Charge.

Material and Labour for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for Pedestal Coping incl necessary framework finished fair using exta cement complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs of Rigid non metallic PVC conduit of dia 20 mm including of all tee, bends, elbows, reducers, and fixing such as couplers lock nuts, saddles, pipe hooks complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs of HOT moulded (FRP) SMC jucntion box for street light pole with locking arrangementt hinged door with IP -65 protection of size 205 x 255 X 112 with 32 Amp 4 way heavy duty terminal block with 10 Amps MCB SP and two steel bracket to fix with pole complete all as specified and directed by Engineer-in-Charge.

Material and labour for sub main wiring 2 runs of 1.5 Sqmm PVC insulated FRLS cable multistranded copper conductor 1100 V grade flameproof conforming to IS drawn through and including suitable dia stove enamelled ERW MS conduit ISI marked and conduit accessories fixed on wall/ ceiling/floors for flameproof application connected upto DB and 1.5 sqmm copper earth wire for earth continuity conductor and connecting to common earth dolly including taking down old complete all as specified. Note :- 3 runs of 1.5 sqmm cable and one length of MS conduit shall be measured as one length.

D N ENTERPRISE

KP GHOSH AND CO

M/S RK Trading

M/s PRABIR ENTERPRISE

M/S DURGA CONSTRUCTION & CO

M/S Karen Enterprises