REPAIR MAINT OF INTERNAL WIRING INCLUDING SUBMAIN WIRING AND CONNECTED WORKS FOR OTM AND MD ACCNS AT RTS AND D SAHARANPUR UNDER GE ROORKEE

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling rose, pendant, regulator, sockets, light fittings etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed electric cable (FRLS) 1100V grade, single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area, in & including non-metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting chases etc wall and making good disturbed surfaces ( for ceiling fan point only, surface casing caping shall be used instead of concealed conduite) and 1.5 Sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including sunk type pressed steel terminal boxes of 1.6 mm thick (duly painted with two coats of black bituminous paint over a coat of red oxide primer on outer surfaces and two coats of aluminium paint on inner surfaces) with and including plastic laminated bakelite sheet cover of hylam board of 2.8 mm thick including cutting holes for switches, sockets, regulators etc as per requirement including fixing with machine screws, washers etc complete all as specified and directed for the following:-

One light point controlled by one, one-way switch

One fan point controlled by one, one-way switch and fan regulator

One bell/buzzer point controlled by one push button

One 3/5 pin, 5 Amps socket outlet point on the same board with other switches controlled by one, one-way switch

One 3/5 pin 5 Amps socket outlet point on independent board controlled by one, one-way switch

All as per Serial item No. 2.00 here-in-before but wiring in existing conduit for the following :-

One light point controlled by one, one-way switch

One fan point controlled by one, one-way switch and fan regulator

One bell/buzzer point controlled by one push button

One 3/5 pin, 5 Amps socket outlet point on the same board with other switches controlled by one, one-way switch

One 3/5 pin 5 Amps socket outlet point on independent board controlled by one, one-way switch

All as per Serial item No. 2.00 here-in-before but with 2.5 Sqmm (nominal area) FRLS cable for 15 Amps 3/5 pin socket power point including 1.5 Sqmm copper conductor green in colour for earth continuity complete all as specified and directed.

All as per Serial item No. 2.00 here-in-before but in existing conduit with 2.5 Sqmm (nominal area) FRLS cable for 15 Amp 3/5 pin socket power point including 1.5 Sqmm copper conductor green in colour for earth continuity complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed electric cable (FRLS) 1100V grade, multi stranded single core copper conductor of size 1.5 Sqmm nominal cross sectional area, in & including non-metallic rigid PVC surface conduit ISI marked medium grade not less than 20mm dia with all conduit accessories and 1.5 Sqmm green PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including sunk type pressed steel terminal boxes of 1.6 mm thick (duly painted with two coats of black bituminous paint over a coat of red oxide primer on outer surfaces and two coats of aluminium paint on inner surfaces) with and including plastic laminated bakelite sheet cover of hylam board of 2.8 mm thick including cutting holes for switches, sockets, regulators etc as per requirement including fixing with machine screws, washers etc complete all as specified and directed for the following:-

One light point controlled by one, one-way switch

one fan point controlled by one, one-way switch and regulator.

One 3/5 pin, 5 Amps socket outlet point on the same board with other switches controlled by one, one-way switch

One 3/5 pin 5 Amps socket outlet point on independent board controlled by one, one-way switch

All as per Serial item No. 16.00 here-in-before but using 2.5 sqmm multi stranded single core copper conductor PVC insulated and unsheathed flame retardant low smoke (FRLS) cable for 3/6 pin 15 Amps socket outlet controlled by one, one-way switch on independent board with 1.5 Sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

Taking down old unserviceable submain wiring of any descrition and S&F Sub main wiring with two runs of single core PVC insulated unsheathed multistranded copper conductor (FRLS) cable of size 4.0 Sqmm LT, 1100V grade, drawn trhough and including PVC non metallic conduit of 20mm or appropriate dia including all accessories with one run of 4.00 Sqmm single core multi stranded copper conductor cable as earth continuity conductor complete all as specified and directed. Note:- (i) Two runs of 4 Sqmm cable & one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Cable required for connection to DBs shall be deemed to be included in unit rate and shall not be measured separately. (iii) Earth wire shall run inside the conduit pipe. (iv) Extra length of cable required for connection to MCBs shall be deemed to be included in unit rate.

All as per Serial item No. 22.00 above but submain wiring using 6.00 Sqmm copper conductor and 4.00 Sqmm as earth continuity conductor complete all as specified and directed.

S&F 5 Amps switch piano flush type polycarbonate single pole one-way complete all as specified and directed.

S&F 15 Amps switch piano flush type polycarbonate single pole one-way complete all as specified and directed.

S&F 2 in 1, 3 pin 5 Amps socket outlet polycarbonate flush type complete all as specified and directed.

S&F 2 in 1, 3 pin 15 Amps socket outlet polycarbonate flush type complete all as specified and directed.

S&F 5 Amps bell push flush type complete all as specified and directed.

S&F in replacement ceiling rose in poly carbonate 3 terminal brass flush type 6 Amps, 250 Volts AC ISI marked, fixing on and including 2.8mm thick 75mm dia sunmica hylum plastic laminated round sheet complete all as specified and directed.

S&F in replacement stepped type electrronic fan regulator flush type on the existing phenolic laminated sheet etc te all as specified and directed.

S&F in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with and including 12 Watt LED bulb PAG series B-22 base complete all as specified and directed.

S&F in replacement electronic calling bell ding dong, AC, 230 Volt, single phase complete all as specified.

Supply only single phase electronic energy meter with LCD display (6 digit bright back lit display) 5-30 Amps, 2 wire, 240 Volts, 50 Hz, Cl-1 type with high surge resistant, hackproof, anti-tamper proof enclosed in transparent box complete all as specified and directed.

Supply only three phase electronic energy meter with LCD display (6 digit bright back lit display) 10-60 Amps, 4 wire, 240 Volts, 50 Hz, Cl-1 type with high surge resistant, hackproof, anti-tamper proof enclosed in transparent box complete all as specified and directed.

S&F in replacement, 2'x2' fluroscent ceiling light with 36 Watt LED ceiling light with highly efficeint light-smoothing optics to deliver superior illumination and energy complete all as specified and directed. Make: Crompton Cat Part No. LCPL-36-CDL(2x2) or other equivalent

S&F in replacement, LED tube light fitting 1x18/20 Watt surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser & integrated electronic driver complete with all accessories internally prewired and including connecting up three core single wire complete all as specified and directed. Make: Havells, Cat Part No. ENDURALINEAR NEOBS20WLED830SPCWH or equivalent Phillips Smart Bright Cat Part No. BN021CLED20SPSUCW GRS2

S&F in replacement, bulk head fittings IP-65, surface mounted comprising LED luminaire of high brightness complete all as specified and directed. Make: Havells Cat Part No. RUGBYNEONFT10WLED 860SSYMTOPC or equivalent Phillips Cat Part No. WT202W LED6S NW PSU S2PC

S&F in replacement, gate light / post top light with 15 Watt LED light as light source, IP-65, made of spun aluminium landscape luminaire suitable for fixing on 40/50 mm GI pipe on the gate post including connection with all necessary accesssories complete all as specified and directed by Engr-In-Charge. Make: Havells Coral (Opal) Cat Part No. CORAL MINIPT15WLED757PSYMTOPC or equivalent in Phillips/cropmpton/C&S/Bajaj

Taking down carefully unserviceable main switchs, DBs including MCBs etc of any size and capacity complete all as specified and directed.

S&F double door MCB distribution board (DB) 220 Volts, 8 way, made of steel sheet, powder coated suitable for MCBs fitted with 200 Amps rated bus bar, neutral link earth bar and din rail single phase and neutral confirming to IS : 13032-1991DB complete all as specified and directed by Engr-in-charge.

S&F double door MCB distribution board (DB) 220 Volts, 4 way, made of steel sheet, powder coated suitable for MCBs fitted with 200 Amps rated bus bar, neutral link earth bar and din rail single phase and neutral confirming to IS : 13032-1991DB complete all as specified and directed by Engr-in-charge.

S&F double door MCB distribution board (DB) 415 Volts, 4 way TPN, made of CRCA sheet, dust and vermin proof, IP 43 with 200 Amps rated copper bus bar, neutral bar, earth bar, triple pole and neutral, flush to wall complete all as specified and directed.

S&F in replacement, MCB single pole, 6 to 32 Amps, 240 Volt 'B' curve, breaking capacity 10 KA, IP 20, transparent lebel holder, fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area including suitable size copper Lugs complete all as specified and directed.

S&F in replacement, MCB double pole 40 Amps, 240 Volt, 50 Hz, 'B' curve, breaking capacity 10 KA, ISI marked complete all as specified and directed.

M&L in replacement, earthing complete with galvanised steel earth plate electrode 600 x 600x 6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and connecting to main switch or switch board complete including PCC masonry pit of 300x300x300mm inner size in PCC (1:2:4) type B1, RCC cover with angle iron frame, charcoal dust and common salt 15cm in layers all round the earth plate, 20mm dia GI watering pipe, a funnel with wire mesh should be provided on top of watering pipe all as per electric plate No. 3 of SSR 2009 (Part-I) including testing after completion complete all as specified and directed.

Taking down carefully existing unserviceable UG cable of any size and capacity complete all as specified and directed.

S&F twin core cable flat or circular of size 6 Sqmm cross sectional area, 1100 volt grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connectiuons suspended by insulating hangers not more than 1 meter apart including 4 mm dia suspension wire, complete all as specified and directed.

S&F twin core cable flat or circular of size 10 Sqmm cross sectional area, 1100 volt grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connectiuons suspended by insulating hangers not more than 1 meter apart including 4 mm dia suspension wire, complete all as specified and directed.

Supply and laying 2 core 16 Sqmm cross sectional area, 1100 volt grade, XLPE insulated armoured heavy duty electric cable with stranded aluminum conductor all as specified and directed.

Supply and laying 2 core 10 Sqmm cross sectional area, 1100 volt grade, XLPE insulated armoured heavy duty electric cable with stranded aluminum conductor all as specified and directed.

Dismantling of house service bracket of any type and description complete all as specified and directed.

S&F house service bracket (hook type) made of 3.0 mtr long 40 mm dia GI pipe medium grade with and including two Nos 90 degree bends, MS hook and stay or guy complete all as specified and directed.

S&F in replacement laying GI tubing light grade 40 mm dia with all fittings in floor, wall or fixed to pole for cable protection including necessary GI clamps, nut & bolts and washer etc complete all as specified and directed.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in, with excavated approved soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm each layer complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable all as specified and directed by Engr-in-Charge. (Note:- Punning thickness of sand cushioning shall be measured as 18 cm)

M&L for brick protection with old size sub class ‘B’ bricks, laid dry, flat over cable, perpendicular across the cable in trenches complete all as specified and as directed.

S&F in replacement, building security light with new generation energy saving & environment friendly long life versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source & exclusively designed polycarbonate cover alongwith electronic driver type street light fitting 25 watt capacity LED and including all accessories duly pre-wired, fixing on existing bracket with nut, bolts & washers as required at site for fixing of street light on LT pole/ wall including taking old street light fitting of any type and description complete all as specified and directed. Make: Havells, Cat Part No ENDURAPEARLSL25WLED 757SASYTOPCMP of Havells or equivalent in C&S/Phillips/ Crompton/Bajaj/Syska

S&F in replacement, Modular switch 1 way 6 A, 1 module complete all as specified and directed.

S&F in replacement, Modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F in replacement, Modular Bell Push, 6A, 1 module complete all as specified and directed.

S&F in replacement, Modular socket 6A-2/3 Pin combined 2 module complete all as specified and directed.

S&F in replacement, Modular socket 6A/16A -2/3 Pin combined 2 module complete all as specified and directed.

S&F in replacement, Modular fan step regulator, 120 W-2 complete all as specified and directed.

S&F in replacement, Modular white cover plate with frame 4 module complete all as specified and directed.

S&F in replacement, Modular white cover plate with frame 8 module complete all as specified and directed.

S&F in replacement, Modular metal flush box 4 module complete all as specified and directed.

S&F in replacement, Modular metal flush box 8 module complete all as specified and directed.

S&F in replacement, Modular metal flush box 3 module complete all as specified and directed.

M/s badrinath Traders

CHAUHAN ENTERPRISES

Balraj and Co

G.H. INFRASTRUCTURE PRIVATE LIMITED

M/s Inderlal

janta tradrers

NAQLI LAL SHARMA AND ARUN SHARMA

SHRI RAM ENTERPRISES

AJAY KUMAR CONTRACTOR

VERDHMAN ASSOCIATES