Providing and fixing of various infrastructure work with other utility at Municipal Printing Press.

Amount

Removing cement plaster of any finish from the wall, complete with racking out the joints to a depth of 20 mm.

Providing and applying synthetic enamel paint or flat oil paint in any requiered shade in 3 coats over a primer coat as per manufacturers specifications including scrapping, cleaning the surface etc. Complete.

Providing and applying 12 mm thick internal plaster in cement mortar 1:4 with white cementicious wall putty finish at all heights and locations for concrete surfaces including hacking of concrete surface, watering, finishing, curing, scaffolding etc. complete.

Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint for Old M.S. Structure Painting

Providing, detailing, composite fabricating members like Trusses, N-girders, girders, bracings, supports, purlins, runners, and similar structural steel members fabricated using M.S. hollow tubular steel sections (circular & rectangular pipes), of TATA Structura Make or equivalent conforming to IS 1239 part 1 and 2 and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transportion of the same to site, erection of structural steel members for all heights & at all levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding, removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos sheet

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of :G.I. Sheet

Providing and fixing the Mechanical Anchor Fasteners as specified below of Hilti Make or equivalent confirming to IS 1367 (Part 3) at required locations and level including drilling the hole, cleaning and anchoring the bolt as per manufacturers specifications etc. complete as directed by Engineer In Charge. M20

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 and above in superstructure above plinth level upto floor five level in all shapes and sizes in : Cement mortar 1:3 (1 cement : 3 coarse sand)

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead :With cement mortar 1:4 (1 cement : 4 fine sand).

Providing and applying 20 mm thick external sand faced cement plaster upto 10m from ground level and at all locations in cement mortar proportion specified below in two coats for masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding, etc complete as directed By Engineer In Charge.

Providing and applying 20 mm thick internal plaster with neeru finish by using ready-mix Roofit mortar at all heights and locations as per manufacturers recommendations for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc. complete.

Removing any type of flooring i.e.mosaic, cement marble, granites non-slippery, tandur, kotah, shahabad stone or Indian Pattern stone, glazed tiles in flooring including bedding brick bat coba , paver blocks of any thickness etc in open passage, footpath, or any flooring laid on ground mechanically or manually and delivering materials in Ward Office and carting away unserviceable materials.

Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design mix from Engineer-in-charge and fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacement of OPC as per IS 456 and uniform blending with cement is to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456- 2000 in the items of ready mixed concrete and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, including the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.M-20 grade plain cement concrete (cement content considered @ 260 kg/cum)

Removing existing door or windows with frame and shutters and making good etc. to the existing surface.

Providing & fixing in position 35 mm thick 1st quality water proof Single Leaf Flush Door for w.c. with 1.5mm thick laminate on both sides with 12x35mm lipping patti on all egdes. Rate is inclusive of s.s.fixtures & fittings, such as handles on both sides, tower bolts, locking arrangement,, door stopper of make ( ozone,Hettich,Hafle ) 450 x 150mm aluminum ventilation grill powder coated, as per architect's detailed drg.and design complete.Size of door 950mm x 2.35mm.D6,D10,D11

Providing and fixing all sides polished natural stone as specified below of approved quality, pattern, colour and thickness for door and window frames / architraves including preparing the surface and levelling in the desired line, machine cutting, jointing in approved adhesives, leveling, smooth cement plastering along the sides to match the existing surface in cement mortar, filling the joints with pigment mixed with cement, cleaning, finishing, curing etc complete as directed by Engineer In Charge.With Lakha Red granite

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing C.P. Brass two way bib cock with flange of approved quality and make

Providing & fixing in position 'Jacquar Continental' make CP Jet Spray with flexible CP supply pipe, and all other accessories, complete

2x28W, T-5 Fixtures, comprises of M.S.Powder coated with end cap. The fixtures complete with high efficiency electronic ballast and PF= 0.98 complete with bright reflector & T-5 lamp

Providing and fixing PVC top sheet roofing Water Proof, Tamper Proof, Corrosion Resistant, Durable Coatingd of approved colour and breather tape, screws complete and making the entire system water tight as per architectural drawings and specification.(Rate does not include cost of structural steel framing which will be paid seperately)

SHREE HERAMB CORPORATION