M and R to DDS at RIA Providing and erecting chainlink fencing at substation and allied work at Drainage Pumphouse PS4

Amount

Accessories

Supplying and erecting fencing of section having size at least 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete with provided earthing as per specification no. SS-AS/FSG

Supplying and erecting 50 x 50 x 6 mm angle iron as corner support 2.45m long fixed at the middle of the fencing frame and the other side inclined at 30 degree angle, in cement concrete foundation of 15 x 15 x 40 cm complete duly painted with one coat of red oxide and two coats aluminium paint complete.

Supplying and erecting double leaf hinged door each 1500 mm in width x 2450 mm in height using B class GI pipe, hinges and angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation and painted complete as per specification no SS-AS/DLD

Supplying and erecting 22 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.I. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.

Excavation in trenches, pits, pipe lines, foundations, column footings, walls etc. in earth’s soils of all types, gravel, sand, soft & hard murum, and boulders up to 0.03 cum. size including removing the excavated material upto a distance of 50 M beyond the edge of excavation including the initial lift of 1.5 M, stacking or spreading as directed, bailing of sub-soil water if any preparing base for foundation etc., and back filing the excavated pit or trench using the excavated material in layers including watering and ramming as required or as directed by Engineer-In-charge, including all labour and materials complete.

Masonry Work Supplying and spreading stone metal 25mm size for 100mm depth above the ground level complete.

Providing and making Second class burnt Brick masonry with conventional /I.S. type bricks in cement mortar 1:6 in foundation sand plinth of inner walls /in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. complete.

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

Hire Charges Excavator / Loader/ JCB

Providing, transporting, cutting, fabricating, welding, hoisting and erecting in position welded or bolted structural steel work consisting of column bases, columns, columns caps, roof legs trusses, portals, wind girders, gantry girders, plate girders, purlins, bracing etc. for structural steel work manufactured out of steel plates rolled sections like I beams, channels, angels, erection bolts as may be required, erecting using devices like derricks, cranes or any other suitable guys etc. and final bolting, welding, testing as may be required including two coat of red oxide zinc crome paint and two coats of synthetic super enamel paint of approved colour and shade. All materials and labour complete.

VARSA ASSOCIATE (BID ID -6803840)

Shree Moraya electricals (BID ID -6802547)

Best Electric Corporation (BID ID -6803613)