ADDITION/ALTERATION AND SPEICAL REPAIR TO SANITARY FACILITY AT JETTIES WHARVES ARE AT NAVAL DOCKYARD MUMBAI UNDER GE (NW) KUNJALI, COLABA, MUMBAI

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Taking down cement plaster or cement lime plaster on brick on stone walls etc including raking out joint, hacking for key, scrubbing down with water etc complete all as specified.

Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.

Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed

-ditto- as per Item above but n.exc 1.5 sqm complete all as specified and as directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and as directed

Demolition of plain cement concrete of any description and in any position not othe wise specifically provided.

Disconnecting existing water tanks, any capacity of tank setting aside (or lowering if required) for repair etc and hoisting reconnecting and refixing in position complete all as directed by Engr in Charge.

Demolition of reinforced concrete in shelves slabs n.exc 15 cm thickness any description and in any position

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc

Material & Labour for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n.exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified.

Material & Labour for Coloured glazed ceramic tiles in vertical surface 450 X 300 X 7 mm or 300 X 200 X 7 mm thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified.

Material & Labour for PCC 75mm thick D-2 type (1:4:8), using (40 mm graded aggregate) as in sub base all as specified and directed.

Material & Labour for Hard wear stone 18-20mm thick (of any type) granite stone slab machine cut in skirting/dado/cill laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified.

Material & Labour for cement concrete tiles 25CmX25CmX22 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick bedding layers in CM 1:3. all as specified & directed by engr-in-charge

Material & Labour for machine pressed precast concrete interlocking paver block With Grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete over 25 mm thick Sand cushion all as specified and directed by engr-in-charge.

Material & Labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement and pigment laid dry over stone dust or sand base and compacted using vibrator complete.

Material & Labour rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) including all safety and scaffolding complete all as specified and directed

Material & Labour for rendering 5mm thick in CM 1:3 on ceiling surface including all safety and scaffolding complete all as specified and directed

Material & Labour for rendering 20 mm thick on fair faces of brick/concrete surfaces with two coats i.e (15 mm thick backing coat in CM (1:6) and 5mm thick finishing coat in CM (1:4)) ,mixed with 3% integral water proofing compound as per manufacturers instructions, finished even and smooth without using extra cement including all safety and scaffolding complete all as specified and directed. (WPC Shall be measured and paid separately)

Supply only integral water proofing compound

Material & Labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper with priming plastered surfaces all as specified and directed

Material & Labour preparation of new plastered surface of ceiling and applying two coat of oil bound distemper on ceiling with alkali resistant primer complete all as specified and directed

Material & Labour for preparation of new plastered wall surfaces of any description and applying two coats of acrylic (antifungal) exterior grade paint on wall/roof including necessary scaffolding complete all as specified and directed by Engr-in-Charge.

Complete removal of existing wate proofing treatment of any description in any position upto concrete surface including cleaning, wire brushing, watering, removal of debris upto 15 Km distance complete all as specified and as directed.

Material & Labour for wire brushing and cleaning top surface of roof , lime terracing or cement concrete including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq.m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and as directed.

Material & Labour for PCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope complete all as specified and as directed.

Material & Labour for laying chicken wiremesh of galvanised steel 0.7mmdia of wire having mesh size 25x25 fixing by using battens of approved makes complete all as specified and as directed.

Material & Labour for rendering 20 mm thick cement plaster in cm (1:3) on roof top surface finished even and smooth without using extra cement and fair including WPC by weight of 3% of total cement content complete all as specified and directed. Note : WPC will be measured and paid separately.

Material & Labour for applying a coat of bituminous primer conforming to IS-3384 @ 1.20 Kg/Sqm on prepared surface of plaster as per manufacturer's instructions, manufactured by the same agency of APP membrane. Providing and laying five layered 4 mm thick APP (Atatic poly propylene) modified polyester reinforced water proofing membrane with minimum weight of 4.60 Kg/Sqm as specified here-in-after. The APP membrane shall be laid using LPG torch-on-application with minimum 100 mm side overlap and 150 mm end overlap. The laying of membrane shall be got done through an authorized applicator of manufacturer of the membrane. The APP membrane shall be taken upto minimum 200 mm on vertical surfaces. The edge of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slop towards rain water pipe outlet complete all as specified and as directed. Notes :- (i) Irrespective of lap the net covered area shall only be measured and paid (ii) The quoted rate shall be deemed to be inclusive of primer for APP membrane and SBR latex complete.

Material & Labour in repairs for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hook and including scaffolding upto any height, nainital pattern/mangalore tiles pettern. complete all as specified and directed by EIC.

Material & Labour for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Material & Labour for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by EIC.

Material & Labour Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., of grade Fe 410 -W(Gde-E- 250) quality- A complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

Material & Labour for Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment.

Material & Labour for preparing New or previously untreated steel surface of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide. All as specified and directed.

Supply & Fixing solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified.

Supply & Fixing factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site all as specified and directed.

Supply & Fixing 100 mm Butt hinges, mild steel, with mild steel hinge pin, bright polished and fixed, type B-11, complete all as specified and directed.

Supply & Fixing 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

Supply & Fixing 150 mm long aluminium anodized barrel tower bolts of extruded sections as fixed complete all as specified and directed.

Supply & Fixing 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Supply & Fixing 150mm extruded aluminium alloy handles, cast type as fixed complete all as specified and directed.

Supply & Fixing 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches.

Supply & Fixing 75mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches.

Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking down 20mm bore, GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Supply & Fixing 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.

Supply & Fixing 20 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.

Supply & Fixing for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed

Supply & Fixing for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed

Material & Labour for 100mm dia cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls or laid in trenches etc complete all as specified and directed.

Material & Labour 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls or laid in trenches etc complete all as specified and directed.

Supply & Fixing 75 mm CI bends (any radiius) diminishing pieces or trapers (larger bore measured) fitted with oval access doors of following sizes

Supply & Fixing 100mm CI bends (any radiius) diminishing pieces or trapers (larger bore measured) fitted with oval access doors of following sizes

Supply & Fixing in repair 75mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Supply & Fixing in repairs 100mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Supply & Fixing in repairs vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , fixing with automatic flushing system with brackets, flush pipes, inlet, outlet etc complete all as specified and directed as fixed in repairs.

Supply & Fixing fixed in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets for fixing purpose, waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed.

Supply & Fixing in repairs fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs of 15 mm bore pipe etc complete all as specified and directed.

Supply & Fixing vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed in repairs complete all as specified and directed.

Supply & Fixing in repairs vitreous china wash down water closet pan, white (excluding flushing cistern and flush pipe) including seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply & Fixing in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuding brackets complete all as specified and directed.

Supply & Fixing in repairs brass Chromium Plated towel rail, 20mm dia, D type , 60 cm long between flanges fixed in repairs complete all as specified.

Supply & Fixing in repairs toilet paper holder of viterous china box type white coloured fixed to walls with chromium plated brass screws CP brass fixed to walls etc, fixed in repairs complete all as specified and directed.

Supply & Fixing in repairs brass CP shower rose 125mm size complete all as specified and directed.

Supply & Fixing in repairs for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed.

Supply & Fixing in repairs Bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs of 15 mm bore pipe etc complete all as specified and directed.

Supply & Fixing in repairs for 15mm bore Brass CP mixer for mixing hot & cold water screwed dow for iron pipe, fixed as in repairs complete all as specified and directed.

Supply & Fixing in reaprs fancy type chromium plated stop valves 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union as fixed in repairs complete all as specified and directed.

Supply & Fixing in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to 15 mm bore pipe etc complete all as specified and directed.

Material & Labour for false ceiling made out fibre cement board of size 595x595x 4 mm thick ceiliing board / tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63mm and cross tee of size 23.50x23.50x0.63mm and angle size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/clits/pin hook etc. for securing frame work to ceiling to the snap grid all as directed by Engr-in-charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern complete all as specified and as directed

Material & Labour for brick work with sub class 'B' bricks (old Size) straight or curved on plan exc 6 m mean radius and built in CM (1:6)

All as per item No 77 above but half brick thick wall built in CM 1:4.

Supply & Fixing Powder coated aluminium frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete shall as specified.

Supply & Fixing 4mm thick backelite with decorative choice laminated on both side completion as specified and as directed

Material & Labour Sheet glass 4 mm thk, ordinary quality and glazing in aluminium beading with screws/ rebates in square exc 0.5 sq.m in each pane as specified and as directed

Supply & Fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.4mm as specified and as directed

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring,cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 5 km as specified and as directed

Supply & Fixing in gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed in repairs for 20mm bore complete all as specified and directed.

Material & Labour PCC 1:2:4 type B1 using (20 mm graded aggregate) as in kerbing all around of tile complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n.exc 1.5m in depth and getting out any type of soil as specified and as directed

Removing excavated material & debris exc. 1.50 Km but n exc. 15 Km and depositing where directed, in soil as specified and as directed

Spreading and levelling in layers n exc 25cm thick including well ramming including watering as required all as directed.

Material & Labour for PCC 1:3:6 type C2 using (40mm graded stone aggregate) as in foundations, fillings & mass concrete etc all as specified and directed.

Material & Labour RCC (design mix) M-30 using 20mm graded stone aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, bases for column,etc basement slabs, under reamed piles and mass concrete. etc complete all as specified and directed by Engr-in-charge.

Material & Labour RCC (design mix) M-30 using 20mm graded stone aggregate as in column, pillars, piers, posts and struts concrete etc complete all as specified and directed by Engr-in-charge.

Material & Labour RCC (design mix) M-30 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. Etc complete all as specified and directed by Engr-in-charge.

Material & Labour RCC (design mix) M-30 using 20mm graded stone aggregate as in walls, rataining walls, basement walls, ballast walls and the like, any thickness, above top of footings including attached pilasters and buttresses etc complete all as specified and directed by Engr-in-charge.

Material & Labour for TMT mild steel bars,10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0 as specified and as directed

ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders as specified and as directed

Formwork to sides of concrete foundation, footings, bases of columns, rafts and raft beam, sides and soffits (if any) of foundation and plinth beams and similar work as in rough finished surfaces complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (horizontal or slopping) complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surfaces of concrete.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similoar work incl attached pillasters, buttresses etc, vertical or to batter.

Material & Labour for PCC 1:4:8 type D2 using (40mm graded stone aggregate) as in foundations, fillings & mass concrete etc all as specified and directed.

Material & Labour hardcore of gauge exc 63mm but n exc 100mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rolled/rammed to a true surface. using broken Stone or boulders all as specified and directed.

Material & Labour 100mm thickness PCC 1:4: 8 type D2 using 40mm graded stone aggregate as in floor and surface shall be finished with broom including form work as required.

Supply & Fixing in repair aluminum anodised GRILL fixed with suifable 'F' section No. 8584 15.30 x 23.40 x 1.40mm fabricated and rivetted to aluminum windows, complete all as specified and directed by Engr-in-charge.

Supply & Fixing in 12 mm thick pre-laminated Medium Density board, both side decorative lamination interior grade, fixed in aluminium/ wooden frame work complete all as specified and directed by Engr-in-charge.

Supply & Fixing in repairs Roller venetion blinds type made out of standard cloth of approved texture with necessary accessories etc complete

Material & Labour for refixing old steel tubing and connection in new or old position of 40mm to 50mm dia bore including all connection accessories, tee, elbo, check nut, socket, (walls, ceiling, floors etc all as specified and directed.

Supply & Fixing 50 mm dia medium grade galvanized steel tubing with all fittings, like tee, elbow, bend, sockets, check nuts, fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.

Supply & Fixing 80 mm dia medium grade galvanized steel tubing with all fittings, like tee, elbow, bend, sockets, check nuts, fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.

Material and labour for ready mix cement concrete in Pavement/Hard standing M-40 of flexural strength of 40Kg/Square in field using minimum 400 Kg of cement per cubic metre laid in bays or as directed with and including steel formwork to sides of concrete spread, compacted and finished in a continuous operation etc all as specified and directed.

Supply & Fixing in repairs table top Wash hand basin vitreous china 640mmX425mm155mm including all necessary fitting complete all as specified and directed.

Supply & Fixing in repairs senso art sensor urinal with input sensor auto flushing system of size 39x37x61 Cm including complete fitting and fixure all as specified and as directed by Engr-in-Charge.

Supply & Fixing in repairs vitreous china wash down water closet pan Rimless Single Piece WC With UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 385x720x710 mm, S Trap- 300 mm in repairs complete all as specified and directed.

Supply & Fixing in repairs CP Pillar cock taps 15 mm bore with Kubix primer sensor faucet for wash basin with pre-mixed water supply kit (Battery operated) complete all as specified and directed.

Supply & Fixing in repair CP Soap Dish Holder complete all as specified and directed.

Supply & Fixing in repair CP Soap Dispenser with Glass Bottle complete all as specified and directed.

Supply & Fixing in repair CP Toilet Roll Holder with Stainless Steel Flap complete all as specified and directed.

Supply & Fixing 150mm long brass, CP barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.

Supply and fix 150mm size brass handle cast type polished bright complete all as specified and directed.

Supply & Fixing in repairs 3 way mixer valve (Hot & Cold) CP Brass for mixing Hot and cold water screwed down for iron pipe complete all as specified and as directed .

Supply & Fixing in repairs towel ring square with round flange complete all as specified and as directed.

Supply & Fixing in repairs CP towel rail 600 mm long with round flange all as specified and as directed.

Supply and applying microconcrete for pillars, column, beams, piers andr complete cleaning of concrete surface and applying epoxy coat as bonding agent for bonding between old and new surface, including all lifts, shuttering all as required as per site condition and directed by Engineer-in-Charge.

Supply & Fixing in repairs 12mm thick, toughened glass for urnial partitions, sheves etc with and including fitting etc complete all as directed

Material & Labour 100 mm thick PCC 1:2:4 type B-I using 20mm graded stone aggregates as in floor using extra cement complete all as specified and directed by EIC.

Providing and fixing well seasoned 1st class teak wood full length new members like joists, rafters, purlins, beams, floors, batterns and boarding etc in roof/floor/staircase portion including all fixtures and tastenings.

Material & Labour for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Material & labour for Stainless steel ladder, railings, plate, chain etc in staircase,concrete surfaces landing etc. complete with and including necessary welding, buffing/ polishing and fixing complete all as specified and directed by Engineer-in-Charge. Design for stairs/ladders or any others will be as approved by GE. Grade of steel shall be grade 316.

Dismantling battens for tiles, shingles etc of any size including tilling fillets exceeding 15 cm space.

Supply & Fixing roof tiles (thickness min 12 mm) Manglore pattern interlocking at side joint and laid dry all as specified and directed.

Supply & Fixing for Ridge or hip tiles, to suit Mangalore pattern of roofing tiles, (thickness min 12 mm) with over lap not less than 150mm, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 all as specified and directed.

Demolition of brick work/stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles including coping complete all as specified and directed.

Material & Labour brick work with sub class 'B' bricks old size, straight or curved on plan exc 6m mean radius in cement mortar 1:4 complete all as specified.

Material & Labour for rendering 15mm thick plastering in cement mortar 1:4 on fair faces of brick work or concrete surfaces mixed with integral water proofing compound as per manufacturers instructions, finished even and smooth without using extra cement complete all as specified and directed. Note : Integral water proofing powder will be measured and paid separately under relvant item of Schedule 'A'

Supply only Integral water proofing compound all as specified and directed.

Demolition and breaking up of SWG(salt glazed stone ware) drain pipes set in cement mortar including demolition of PCC in haunching /benching around pipes required complete all as specified and directed.

Internal dia of pipe 150mm

Internal dia of pipe 200mm

Excavation in trenches not exc 1.5 m wide and n exec 3m deep in for foundation etc getting out in hard dense soil .

Removing excavated material n.exc 50m and n.exc 250m and depositiing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed

Returning and filling in including spreading, levelling, watering and well rammed in layers not exec 25 complete all as specified and as directed as in hard/dense soil complete all as specified and as directed

Material & Labour for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in concrete bed including packing under and haunching against the sides of pips after they are laid and tested complete all as specified and directed for the following

Internal dia of pipe 150mm

Internal dia of pipe 200mm

Material & Labour for RCC pipes 150mm dia grade 'A', class NP3, laid in trenches and jointed complete all as specified and directed.

-Ditto- as per item above but 200mm dia

Supply and fix rolled mild steel section of Grade FE 410-W, (Gde- E-250) quality-A, as in Plates (Plane or Chequered) channels, square cut or noteched (ordinary and counter sunk) forming holes, without any attachment.

Supply and fix structural steel framed works such as angle, channel, grating, gate, ladder, parline, rafter, grating etc. Confirming to Fe-290, E-165 as in supporting structure of duct, drain edge etc including making good the disturbed portion of concrete surfaces with 1:2:4 type B0 (using 12.5mm graded stone aggregate) all as specified and directed.

Material & Labour for preparation of new steel surfaces exc 10cm width of girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Cement concrete type B2 1:2:4 (20mm graded stone aggregate) in surface channels and drain etc all as specifed and directed.

Material & Labour for PCC 1:4:8 type D2 using (40mm graded stone aggregate) as in sub base, foundations, fillings & mass concrete etc all as specified and directed.

Supply and fixing Rotational moulded polyethylene water storage tanks of capacity 1000 Ltrs(cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed by Engr-in-Charge.

Supply and fixing Gun-metal, globe or gate valve of size 25mm, ISI marked with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed by Engr-in-Charge.

Supply and fixing Ball brass valve of size 25 mm,high pressure, ISI marked with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed by Engr-in-Charge.

Supply and fixing GI Tubing of size 25 mm 'Medium grade',galvanised,with all fitting; laid in trenches all as specified and directed by Engr-in-Charge.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces as directed by Engineer-in-Charge

Material & Labour for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, ISI marked, unsheathed multistranded copper onductor cable of size 1.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc complete all as specified for following:-

One light point controlled by one switch

One Fan point controlled by one 5A switch

One 5 Amps switch socket combination on independent board

One 5A flush type switch socket point on same board board

Material & Labour for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module complete for One 5 pin, 15A switch socket combination on the independent board complete all as specified and directed.

One 15 Amps switch socket combination on independent board

Material & Labour for sub-main wiring with 2 runs of 16.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC casing caping not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 16.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green

Material & Labour for sub-main wiring with 4 runs of 16.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC casing caping not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 16.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green

Supply and fix switch piano, modular type 1 way 6 Amps 1 module 240 volts flush type all as specified and directed by Engr-in-Charge.

Supply and fix switch piano, modular type 1 way 16 Amps 1 module 240 volts flush type all as specified and directed by Engr-in-Charge.

Supply and fix modular socket 6 Amps 2/3 pin 240 volts Ac combined 2 module all as specified and directed by Engr-in-Charge.

Supply and fix modular socket 16 Amps 2/3 pin 240 volts Ac combined 2 module all as specified and directed by Engr-in-Charge.

Supply and fix ceiling rose surface bakelite three terminal of size 60x50 mm, 240 Volts AC complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC, min 110 lumen per watt, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, min 110 lumen per watt, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED street light fitting 120 Watt, min 100 lumen per watt, 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED flood light 120W watt, min 100 lumen per watt, 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-in-Charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers all as specified and directed by Engr-in-Charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers all as specified and directed by Engr-in-Charge.

Supply & Fixing in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 4 way, 240 volts with bus bar rating 100 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

Supply & Fixing MCB 6 to 32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed.

Supply & Fixing in MCB, SPN 40 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed.

RS Enterprises (BID ID -3128702)

RAJENDRA CONSTRUCTION (BID ID -3126620)

Shetty Construction Co (BID ID -3128273)

RAMESH ENTERPRISES (BID ID -3129211)

Darpan Construction (BID ID -3129323)

ROHIT CONSTRUCTION (BID ID -3128813)