Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹32.5 L+₹35,842.80 (1.12%)Rejected-Finance KOHLI NO 17509 GALI KHADDAR BHANDAR WALI BHI WALA ROAD BATHINDA PB 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹32.5 L+₹42,288.55 (1.32%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹33.4 L+₹1.3 L (3.89%)Rejected-Finance GROUND FLOOR TRACTOR MARKET KAITHAL ROAD ASSANDH KARNAL HARYANA 132039 | KARNAL | HARYANA | 132039 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹33.6 L+₹1.5 L (4.76%)Rejected-Finance SIDDHARTH ENCLAVE NEAR JINDAL FACTORY RAMNAGAR ROORKEE 247667 | HARIDWAR | UTTARAKHAND | 247667 | L5 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | M/s BHUPINDRA ENGINEERING WORKS L2 | Rasvinderpalandco L3 | ANANT ENTERPRISES L5 | P.K ENTERPRISES L1 | SWARN SINGH AND CO. L4 | Truly Technos LLP L6 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down unserviceable street light fitting upto 11 mtrs LED street light Fitting /Flood light fitting of any size from the pole/bldg and kept in safe custody for refixing or for schedule of credit to contractor, complete all as specified and directed by Engineer in Charge.
Note:-
All T&P i,e ladder,Tools,Safty glooves etc will be provided by the contractor without any extra cost . | 197 | EACH | 50 ₹9,850 Lowest | 50 ₹9,850 Lowest | 500 ₹98,500 | 100 ₹19,700 | 280 ₹55,160 | 110 ₹21,670 |
| 2.00 | Repair/maintenance of street light/security lights any type flood lights, post op lanterns or any other external light in its position fixed on pole/high mast/building structure or by taking down to round, if required, testing all the components /parts wiring etc. identifying and replacing the defective components wise choke (ballast) electronic driver, ignite, capacitor, lamp, lamp holder, connector, connection wire/cables, MCB etc. including refixing the fixing to its original position (if) taken down including repair and maintenance of street light control timer & junction box, period of 11 months from the date of commencement of the work, complete all as specified and directed by Engineer in Charge. | 650 | EACH JOB | 350 ₹2,27,500 | 95 ₹61,750 Lowest | 500 ₹3,25,000 | 150 ₹97,500 | 270 ₹1,75,500 | 110 ₹71,500 |
| 3.00Note for Sr No:-02 (i) The rate against the above mentioned items is deemed for cost of labour and allied expenses only. (ii) Cost of electronic driver against above maintenance item will be measured and paid separately under respective item of of schedule. (iii) The contractor's representative will report to concerned JE E/M at 0900 hrs daily to collect the list of defective street light fitting one will submit the completion report on the same day before 1730 hrs to JE E/M. (iv) The contractor has to rectify the defects/reports and make the street light serviceable with in 24 hours from time the list of defective street lights is handed over to him/her rep by the concerened JE E/M, In case the street light is not made functional for whatsever reason with in the specified time line, an amount of Rs. 50per such defective street light per day will recovered from the amount due to him through RAR /Final Bill.The contractor shall be carry out repair/maint will simultaneously both tech area by arranging separate team of electrician/technician in order to ensure properly & timely rectification of defects. (v) The contractor shall maintain sufficient stock of spares/materials required for repair/maint of street light with the concerned JE E/M & Vehicle and T&P will be arrange by the contractor. (vi) The contractor shall be fully responsible for the safety of his men engaged for executing this work and he will provide all requisite safety equipments and clothing to his men and department shall not be responsible for any mishappening/ accident/ injury to his men. | |||||||||
| 4.00 | S&F of LED street light fitting 60 Watt 230 V AC outdoor type 5700 K with high pressure die cast aluminium hosing along with prismatic polycarbonate modular secondary lens optics with IP 66 ingress protection . 4KV in-built and 10 KV external surge protection with top opening driver cover for easy maintenance with efficacy not less than 120 lm/W heat resistant. The LED driver shall be of isolated type with Constant Current Constant Voltage topology to ensure optimum driving of LEDs. The LED streetlight shall have power factor more than 0.95. The optical compartment shall be covered with heat resistant toughened glass for safety. The LED Street light should be top maintainable for easy maintenance LED street light shall be of Integral type complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics, complete all as specified and directed by Engineer in Charge.
Make :- Bajaj Cat part No. ENXT P54L WH CR PC SD or equivalent all as approved by Engineer-in-Charge | 133 | EACH | 2,700 ₹3,59,100 | 3,750 ₹4,98,750 | 2,900 ₹3,85,700 | 2,500 ₹3,32,500 Lowest | 2,600 ₹3,45,800 | 2,700 ₹3,59,100 |
| 5.00 | S&F of LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing along with prismatic polycarbonate modular secondary lens optics with IP 66 ingress protection. 4KV in-built and 10 KV external surge protection with top opening driver cover for easy maintenance with efficacy not less than 120 lm/W heat resistant. The LED driver shall be of isolated type with Constant Current Constant Voltage topology to ensure optimum driving of LEDs. The LED streetlight shall have power factor more than 0.95. The optical compartment shall be covered with heat resistant toughened glass for safety. LED street light shall be of Integral type complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics, complete all as specified and directed by Engineer in Charge.
Bajaj Cat part No. ENXT P54L WH CR PC SD or equivalent all as approved by Engineer-in-Charge | 39 | EACH | 1,900 ₹74,100 Lowest | 2,500 ₹97,500 | 2,500 ₹97,500 | 2,000 ₹78,000 | 2,300 ₹89,700 | 2,150 ₹83,850 |
| 6.00 | S&F of Flood light luminaire 80 watt 230 V AC outdoor type with poly carbonate optics die-cast housing, IP66 ingress protection, 4KV in -built and 10 KV external surge protection. Efficacy 110 Im/W complete suitable for input voltage140 Volt to 280 Volt. The LED flood light shall have power factor more than 0.95, 50000 L70, CRI>70, CCT 5665K ± 355K, THD <10%,IP 66, IK 07, Operating Temperature -10 degree Celsius to 50 degree Celsius, Beam Angle 70 degree, complete all as specified and directed by Engineer in Charge.
Bajaj Cat part No. GLATT MT 96L WH PO PC SD or equivalent all as approved by Engineer-in-Charge | 9 | EACH | 3,300 ₹29,700 | 3,250 ₹29,250 Lowest | 4,000 ₹36,000 | 6,000 ₹54,000 | 5,000 ₹45,000 | 4,300 ₹38,700 |
| 7.00 | S&F of Flood light luminaire 150 watt 230 V AC outdoor type with poly carbonate optics die-cast housing, IP66 ingress protection, 4KV in built and 10 KV external surge protection. Efficacy 110 Im/W complete suitable for input voltage 140 Volt to 280 Volt. The LED flood light shall have power factor more than 0.95, 50000 L70, CRI>70, CCT 5665K ± 355K, THD <10%, IP 66, IK 07, Operating Temperature -10 degree Celsius to 50 degree Celsius, Beam Angle 70 degree, complete all as specified and directed by Engineer in Charge.
Bajaj Cat part No. GLATT MT 480L WH PO PC SD or equivalent all as approved by Engineer-in-Charge
Note for Sr No. 04 to 08:-
(i) Driver and luminaire of LED fitting shall be of same manufacturer.
(ii) All T&P i.e. ladder, Tools, Safety gloves etc will be provided by the contractor without any extra cost to height upto 25 mtr.
(iii) If same capacity is not available next higher capacity shall be provided by the contractor without any extra cost. | 10 | EACH | 5,200 ₹52,000 | 3,350 ₹33,500 Lowest | 6,000 ₹60,000 | 8,000 ₹80,000 | 6,500 ₹65,000 | 5,800 ₹58,000 |
| 8.00 | S&F of Flood light luminaire 120 watt 230 V AC outdoor type with poly carbonate optics die-cast housing, IP66 ingress protection, 4KV in -built and 10 KV external surge protection. Efficacy 110 Im/W complete suitable for input voltage140 Volt to 280 Volt. The LED flood light shall have power factor more than 0.95 , 50000 L70,CRI>70,CCT 5665K ± 355K, THD <10%,IP 66,IK 07, Operating Temperature -10 degree Celsius to 50 degree Celsius ,Beam Angle 70 degree, complete all as specified and directed by Engineer in Charge.
Bajaj Cat part No. GLATT MT 480L WH PO PC SD or equivalent all as approved by Engineer-in-Charge
Note for S.No. 04 to 08:-
(i) Driver and luminaire of LED fitting shall be of same manufacturer
(ii) All T&P ie ladder,Tools,Safty glooves etc will be provided by the contractor without any extra cost to height upto 25 mtr.
(iii) If same capacity is not available next higher capacity shall be provided by the contractor without any extra cost. | 6 | EACH | 5,000 ₹30,000 | 4,200 ₹25,200 Lowest | 4,500 ₹27,000 | 10,000 ₹60,000 | 6,500 ₹39,000 | 5,300 ₹31,800 |
| 9.00 | S&F of street light GI pipe bracket 50 mm dia 1.50 metre length (ISI marked) light grade bend to shape with two Nos MS clamp duly painted nuts and bolts etc, complete all as specified and directed by Engineer in Charge. | 50 | EACH | 400 ₹20,000 | 195 ₹9,750 Lowest | 400 ₹20,000 | 500 ₹25,000 | 200 ₹10,000 | 700 ₹35,000 |
| 10.00 | S&F of street light GI pipe bracket 25mm dia 1.50 metre length (ISI marked) light grade bend to shape with two Nos MS clamp duly painted nuts and bolts etc, complete all as specified and directed by Engineer in Charge. | 60 | EACH | 300 ₹18,000 | 135 ₹8,100 Lowest | 300 ₹18,000 | 500 ₹30,000 | 150 ₹9,000 | 600 ₹36,000 |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
30 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BHISIANA
GE (AF) BHISIANA PIN - 151201
REPAIR/ REPLACEMENT/ MAINT OF US SECURITY LIGHT ALONGWITH CONNECTED ITEM IN TECHNICAL AREA AND DOMESTIC AREA AT AF STN BHISIANA
2025_MES_717736_1
GE/BHI/T-116/2025-26
Open Tender
Civil Works
Item Rate
273 days
GE (AF) BHISIANA
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE (AF) BHISIANA
₹80,000
Yes
3 Sept 2025
1 Jul 2025
1 Aug 2025
1 Jul 2025
30 Jul 2025
16 Jul 2025
1 Jul 2025 - 8 Jul 2025
Amount
Taking down unserviceable street light fitting upto 11 mtrs LED street light Fitting /Flood light fitting of any size from the pole/bldg and kept in safe custody for refixing or for schedule of credit to contractor, complete all as specified and directed by Engineer in Charge. Note:- All T&P i,e ladder,Tools,Safty glooves etc will be provided by the contractor without any extra cost .
Repair/maintenance of street light/security lights any type flood lights, post op lanterns or any other external light in its position fixed on pole/high mast/building structure or by taking down to round, if required, testing all the components /parts wiring etc. identifying and replacing the defective components wise choke (ballast) electronic driver, ignite, capacitor, lamp, lamp holder, connector, connection wire/cables, MCB etc. including refixing the fixing to its original position (if) taken down including repair and maintenance of street light control timer & junction box, period of 11 months from the date of commencement of the work, complete all as specified and directed by Engineer in Charge.
Note for Sr No:-02 (i) The rate against the above mentioned items is deemed for cost of labour and allied expenses only. (ii) Cost of electronic driver against above maintenance item will be measured and paid separately under respective item of of schedule. (iii) The contractor's representative will report to concerned JE E/M at 0900 hrs daily to collect the list of defective street light fitting one will submit the completion report on the same day before 1730 hrs to JE E/M. (iv) The contractor has to rectify the defects/reports and make the street light serviceable with in 24 hours from time the list of defective street lights is handed over to him/her rep by the concerened JE E/M, In case the street light is not made functional for whatsever reason with in the specified time line, an amount of Rs. 50per such defective street light per day will recovered from the amount due to him through RAR /Final Bill.The contractor shall be carry out repair/maint will simultaneously both tech area by arranging separate team of electrician/technician in order to ensure properly & timely rectification of defects. (v) The contractor shall maintain sufficient stock of spares/materials required for repair/maint of street light with the concerned JE E/M & Vehicle and T&P will be arrange by the contractor. (vi) The contractor shall be fully responsible for the safety of his men engaged for executing this work and he will provide all requisite safety equipments and clothing to his men and department shall not be responsible for any mishappening/ accident/ injury to his men.
S&F of LED street light fitting 60 Watt 230 V AC outdoor type 5700 K with high pressure die cast aluminium hosing along with prismatic polycarbonate modular secondary lens optics with IP 66 ingress protection . 4KV in-built and 10 KV external surge protection with top opening driver cover for easy maintenance with efficacy not less than 120 lm/W heat resistant. The LED driver shall be of isolated type with Constant Current Constant Voltage topology to ensure optimum driving of LEDs. The LED streetlight shall have power factor more than 0.95. The optical compartment shall be covered with heat resistant toughened glass for safety. The LED Street light should be top maintainable for easy maintenance LED street light shall be of Integral type complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics, complete all as specified and directed by Engineer in Charge. Make :- Bajaj Cat part No. ENXT P54L WH CR PC SD or equivalent all as approved by Engineer-in-Charge
S&F of LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing along with prismatic polycarbonate modular secondary lens optics with IP 66 ingress protection. 4KV in-built and 10 KV external surge protection with top opening driver cover for easy maintenance with efficacy not less than 120 lm/W heat resistant. The LED driver shall be of isolated type with Constant Current Constant Voltage topology to ensure optimum driving of LEDs. The LED streetlight shall have power factor more than 0.95. The optical compartment shall be covered with heat resistant toughened glass for safety. LED street light shall be of Integral type complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics, complete all as specified and directed by Engineer in Charge. Bajaj Cat part No. ENXT P54L WH CR PC SD or equivalent all as approved by Engineer-in-Charge
S&F of Flood light luminaire 80 watt 230 V AC outdoor type with poly carbonate optics die-cast housing, IP66 ingress protection, 4KV in -built and 10 KV external surge protection. Efficacy 110 Im/W complete suitable for input voltage140 Volt to 280 Volt. The LED flood light shall have power factor more than 0.95, 50000 L70, CRI>70, CCT 5665K ± 355K, THD <10%,IP 66, IK 07, Operating Temperature -10 degree Celsius to 50 degree Celsius, Beam Angle 70 degree, complete all as specified and directed by Engineer in Charge. Bajaj Cat part No. GLATT MT 96L WH PO PC SD or equivalent all as approved by Engineer-in-Charge
S&F of Flood light luminaire 150 watt 230 V AC outdoor type with poly carbonate optics die-cast housing, IP66 ingress protection, 4KV in built and 10 KV external surge protection. Efficacy 110 Im/W complete suitable for input voltage 140 Volt to 280 Volt. The LED flood light shall have power factor more than 0.95, 50000 L70, CRI>70, CCT 5665K ± 355K, THD <10%, IP 66, IK 07, Operating Temperature -10 degree Celsius to 50 degree Celsius, Beam Angle 70 degree, complete all as specified and directed by Engineer in Charge. Bajaj Cat part No. GLATT MT 480L WH PO PC SD or equivalent all as approved by Engineer-in-Charge Note for Sr No. 04 to 08:- (i) Driver and luminaire of LED fitting shall be of same manufacturer. (ii) All T&P i.e. ladder, Tools, Safety gloves etc will be provided by the contractor without any extra cost to height upto 25 mtr. (iii) If same capacity is not available next higher capacity shall be provided by the contractor without any extra cost.
S&F of Flood light luminaire 120 watt 230 V AC outdoor type with poly carbonate optics die-cast housing, IP66 ingress protection, 4KV in -built and 10 KV external surge protection. Efficacy 110 Im/W complete suitable for input voltage140 Volt to 280 Volt. The LED flood light shall have power factor more than 0.95 , 50000 L70,CRI>70,CCT 5665K ± 355K, THD <10%,IP 66,IK 07, Operating Temperature -10 degree Celsius to 50 degree Celsius ,Beam Angle 70 degree, complete all as specified and directed by Engineer in Charge. Bajaj Cat part No. GLATT MT 480L WH PO PC SD or equivalent all as approved by Engineer-in-Charge Note for S.No. 04 to 08:- (i) Driver and luminaire of LED fitting shall be of same manufacturer (ii) All T&P ie ladder,Tools,Safty glooves etc will be provided by the contractor without any extra cost to height upto 25 mtr. (iii) If same capacity is not available next higher capacity shall be provided by the contractor without any extra cost.
S&F of street light GI pipe bracket 50 mm dia 1.50 metre length (ISI marked) light grade bend to shape with two Nos MS clamp duly painted nuts and bolts etc, complete all as specified and directed by Engineer in Charge.
S&F of street light GI pipe bracket 25mm dia 1.50 metre length (ISI marked) light grade bend to shape with two Nos MS clamp duly painted nuts and bolts etc, complete all as specified and directed by Engineer in Charge.
Taking down LT cable 1100 Volts grade heavy duty UG cable XLPE/ PVC of size 6 to 16 sqmm 2 to 4 core, complete all as specified and directed by Engineer in Charge.
Supply, laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 Sq mm 4 Core with aluminium thimble of same size, complete all as specified and directed by Engineer in Charge.
Supply, laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape with galvanised steel wire or tape and overall PVC sheathed 4 core 10 sq. mm nominal cross section in service connections, complete all as specified and directed by Engineer in Charge.
Supply, laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape with galvanised steel wire or tape and overall PVC sheathed 2 core 6 sq. mm nominal cross section in service connections, complete all as specified and directed by Engineer in Charge.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated copper conductor served with an inner sheathing of PVC tape with galvanised steel wire or tape and overall PVC sheathed 2 core 1.5 sq. mm nominal cross section in service connections, complete all as specified and directed by Engineer in Charge.
M&L for Excavation in trenches not exc.1.5 m wide and not exceeding 1.5m depth for foundation of poles/laying of cables/ stay/ strut etc not exceeding 10 Sq m on plan and getting out in soft/loose soil, complete all as specified and directed by Engineer in Charge.
M&L for Returning, filling including spreading, levelling watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed by Engineer in Charge.
M&L for Removing excavated material (soil) n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed by Engineer in Charge.
M&L for providing Fazilka river sand as in sand cushioning to under ground cable including punning down of sand in layers, complete all as specified and directed by Engineer in Charge.
M&L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm, complete all as specified and directed by Engineer in Charge.
S&F in replacement of sheet metal (MS) bus bar box floor mounted single door, outdoor type weather proof, size 300x300x200mm mounted on ground with iron angles (25x25x4mm) having aluminium bus bar 4 nos, rated 100amp including suitable PCC grouting, complete all as specified and directed by Engineer in Charge. Note :- Cost of foundation work is included in rate quoted by contractor.
M&L for galvanized steel tubing 15 mm dia medium garde (ISI marked) for protection of cable fixed to pole/walls or laid in floors, road crossing ducts with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc, complete all as specified and directed by Engineer in Charge.
Supply & Laying GI pipe of 50mm light grade protection for UG cable, complete all as specified and directed by Engineer in Charge.
S&F of single phase driver for LED street light / flood light of 45 to 60 watt capacity and compatible with existing street light/ flood light any type / any rating, complete all as specified and directed by Engineer in Charge.
M&L for scraping down and removing of old deteriorated paint from existing steel tubular poles of height upto 8.5 mtr above ground level, preparing surface for painting, applying two coats of aluminium paint upto full height of poles including MS clamps, GI brackets, fitting etc. complete all as specified and directed at site including black and yellow strips of 30 cm each upto 1.5 m above PCC with black and yellow paint and marking of Pole No. 2 mtr above PCC, cutter should not be long than 6 cm height as 16 cm dia circle around the marker number, complete all as specified and directed by Engineer in Charge.
M&L for preparation of old PCC surfaces and applying alternatively in yellow and black one coat of synthetic enamel black paint to PCC pole upto 1 mtr height from ground level to LT pole including numbering of pole with black paint, complete all as specified and directed by Engineer in Charge.
M&L cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for pole pedestal (PCC) after demolition of existing cement concrete and removing from site including necessary form work etc, complete all as specified and directed by Engineer in Charge.
M&L cement concrete 1:2:4, type B-2 (using 40mm graded stone aggregate) in foundation filling and mass concrete after demolition of existing cement concrete and removing from site, complete all as specified and directed by Engineer in Charge.
M&L for brick protection cover of UG cable by re-using old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm, complete all as specified and directed by Engineer in Charge.
Supply, installing, testing and commissioning factory made LT feeder pillar box Outdoor type platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system all as specified and directed having bus bar installed on DMC/Epoxy insulators. The panel shall be dust and vermin proof, IP-65 class protection and made of 3.15 mm CRCA MS sheet with front opening type with double door shutter and locking arrangement (including provn of lock with 2 keys), powder coated finish (over a coat of red oxide), primer on outside and two coats of red oxide primer on inside surface with TPN aluminium bus bar of rating not less than 200Amps including 1 No MCB SPN 06 Amps on suitable foundation, complete all as specified and directed by Engineer in Charge.
S&F of NG Series AIO Solar Street Light 15 Watt made with High Efficiency Mono Crystalline Solar PV Module, Lithium Ferro Phosphate battery with in-built BMS technology, High Efficacy LED, MPPT Solar Charge Controller and Aluminium Extruded body & is specially programmed to automatically control the dimming and brightness of light, which increases the backup time complete with GI Pole of height 4 mtr, complete all as specified and directed by Engineer in Charge. Havells CAT Part No. SOLAR AIO 15 W or equivalent as approved by Engineer-in-Charge.
S&F in repair/ replacement of garden light fittings LED bollard 9 Watt 3000 K in rectangular shaped victorian design with opal acrylic diffuser and IP65 protection, complete all as specified and directed by Engineer in Charge. Bajaj cat part No. BGBOS 605 9W LED WW or equivalent as approved by Engineer-in-Charge.
S&F of single phase driver for LED street light / flood light of 80 to 150 watt capacity and compatible with existing street light/ flood light any type / any rating, complete all as specified and directed by Engineer in Charge.
M/s BHUPINDRA ENGINEERING WORKS (BID ID -3369044)
Rasvinderpalandco (BID ID -3368425)
SWARN SINGH AND CO. (BID ID -3369117)
ANANT ENTERPRISES (BID ID -3367958)
Truly Technos LLP (BID ID -3374835)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .