Balance work of Psychiatry Block G plus 2 at SKIMS Medical College and Hospital Bemina Srinagar

Amount

Brick work with common burnt clay (non-modular) bricks of class designation 75 in foundation and plinth in cement mortar 1:6 ( 1 cement : 6 fine sand) including all carriages, leads & lifts complete job.

Extra over brick work in superstructure above plinth level upto floor five level including all carriages, leads & lifts complete job.

15mm cement plaster on the rough side of single or half brick wall of mix: 1:6 (:1 cement :6 coarse sand) including all carriages, leads & lifts complete job.

20mm cement plaster on the rough side of single or half brick wall of mix: 1:6 (:1 cement :6 coarse sand) in course sand (External walls) including all carriages, leads & lifts complete job.

Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 800x800mm.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade not less than (12"x18") complete.

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Providing & applying POP putty in bedding POP ceiling beading.

Providing & fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, biffing all complete including fixing the railing with nuts & bolts.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): 1st class Imported wood

Providing and fixing 30mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Ist class Imported wood.

Providing and fixing 30mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 1st Class Imported wood.

Providing and fixing solid core flush doors of 35mm to 40 mm thickness of required section/size/ specification with PVC membrane as directed by site engineer including cost of hinges, screws, nails, etc. complete.

Marble work gang saw cut (polished and machine cut) of thickness 16 mm for wall lining (veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 (1 cement: 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for Separately). (Area of slab over 0.5 sqm).

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Tow or more coats on new work.

Providing and fixing with wooden fillets float glass panes of thickness 3.5mm in Doors, Windows, Ventilators, shutters and partitions etc. including all fittings complete.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) inlcuding all carriages, leads & lifts complete

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages, leads, lifts, head load etc. complete job.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth /above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Lintel, beams, plinth beams, girgers, bressumers and cantilevers.

Providing & filling of bolders in foundation by way of hand packing including ramming etc. with all leads, lifts and carriage complete.

Providing & laying of dry stone soling of required grade/size as per site requirement in foundation including watering, ramming, dressing, carriage complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including all carriages, leads & lifts complete job.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Steel work welded in built up sections/ framed work in trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing of coloured Tile profile sheets 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 microns).

Providing and fixing of Aluminium Composite Panel ACP 3mm thick of any colour, pattern, design including cost of adhesive, PVC taps, Screws etc. complete.

Supplying, stacking of good earth including spreading, ramming, dressing etc. with all leads, lifts and carriage complete.

Washed stone grit plaster on exterior walls of height upto 10 m above ground level in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2kg of cement per m2, top layer 15mm cement plaster 1:1/2 :2 (1 cement: 1/2 coarse sand : 2 stone chippings 10mm nominal size), in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer-in -charge (payment for providing grooves shall be made separately).

Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 15 mm wide and 15 mm deep groove.

Providing and fixing 18mm thick commercial ply for making cup boards with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge

Providing & fixing of dulmica 0.8mm thick on amooth surface including cost of adhesive etc. complete.

Supply & stacking of graded stone aggregate at site (63mm - 45mm) quarry including laying, spreading and compaction in uniform thickness rolling with road roller 8 to 10 tonne including stone screening & binding material to fill up interstices of coarse aggregate watering v compaction to the required density including all leads, lifts and carriage of all materials involved complete.

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) using Ordinary cement.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing & fixing of Mild steel butt hinges 75x40mm including cost of screws, nuts etc. complete.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :100x10mm.

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 75mm

Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete. Double strip (Horizontal type)

Providing & fixing of Hooks & stoppers including all necessary accessories complete job.

Providing & fixing of M.S Hasps and stalples 90mm including all necessary accessories complete job.

Providing & fixing M.S rod locks with inbuilt sliding bolt including screws, nuts of heavy duty complete of approved quality with a pair of levers Godrej, Link or equivalent make). 275mm long.

Providing & fixing of 18mm thick moulded beading Budloo wood 12mmx18mm.

Providing & fixing of lipping 6mm thick ply including cost of fittings etc.

Providing and fixing PVC pipes of standard make including cost of trenching / refilling /gaskets / adhesive testing all complete (type B Pipe). 150mm.

Providing and fixing of B-class PVC fittings/fixtures of approved make for sewerage disposal including cutting of floors, walls, trenching and making good the same complete with putty, rubber washer and adhesive. Plain bend 150 mm dia.

100 mm dia.

Door bend 100 mm dia.

Door Tee 100x100x 100mm dia.

PVC Collar 150mm dia.

PVC Collar 100mm dia.

PVC Cowl 75 mm x100mm dia.

PVC Floor Trap 75 mm x100mm dia.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing & fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast iron P or S trap 10 litre low level white PVC flushing cistern including flush pipe of approved make with manually controlled device (handle lever conforming to IS:7231 with all fittings & fixtures complete including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing PVC waste pipe for sinks or wash basins including PVC waste fittings complete. Flexible pipe, 40mm dia.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing & fixing of C.P brass grating of approved quality, frame & cover complete job.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

Providing & fixing C.P brass health faucet of approved quality conforming to IS standards and weighing not less than 810 gms 15mm nominal bore.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 15mm nominal bore.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 25mm nominal bore.

Providing and fixing uplasticised PVC connection pipe with brass unions. 45cm length 15 mm nominal bore.

Providing and fixing of C.P brass wall mixer Parko or equivalent make heavy duty with detachable tubes / PVC connections complete.Single hole 15mmdia.

Providing & fixing CP brass shower rose of standard make 15mm x 120mm inlet 100mm dia.

Providing and fixing Ball cock with PVC rod dia of ball 100mm of approved quality, colour and make complete.

Providing & fixing of CP brass cups of standard make.

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, steel hooks including cutting and making good the walls etc.(Internal) 15 mm dia. nominal bore Medium complete.

Providing & fixing G.I pipes complete with G.I fittings including trenching and refilling (External work) 25mm dia. medium

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work). 20mm nominal bore.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work). 25mm nominal bore.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing & fixing steel hooks for holding G.I Pipe.

Providing & fixing G.I Tank Nipple. 20mm dia.

Providing & fixing CP brass Towel rail 24"

Providing & fixing CP brass Soap case.

M/S BHAT SONS BUILDERS AND CONSTRUCTION WORKS

SHAWL INFRASTRUCTURES

MOHD SULTAN RATHER

M/S NASEEB BUILDERS

BAGH HUSSAIN SHAH