Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.6 LAccepted-AOC PATHANKOT | ₹17.6 L | L1 | Accepted-AOC l1 |
| 2 | l2₹23.3 L+₹5.7 L (32.2%)Rejected-AOC SHOP NO 06 DEPUR MOHALLA GOENWAL TALWARA HOSHIARPUR PUNJAB | HOSHIARPUR | HOSHIARPUR | PUNJAB | 144222 | ₹23.3 L+₹5.7 L (32.2%) | l2 | Rejected-AOC l2 |
| Sl No | Description | Qty | Unit | SOHAN SINGH & COMPANY L2 | Agriculture Farm and Solution L1 |
|---|---|---|---|---|---|
| 1.00 | Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, including the cost of diversion for traffic, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. | 6,300 | Cum | 101.18 ₹4,09,409.69 Lowest | 103 ₹4,16,774.05 |
| 2.00 | Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work. | 504 | Cum | 744.5 ₹2,06,256.28 Lowest | - |
| 3.00 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth | 21.06 | Cum | 7,637.55 ₹84,394.93 | 7,500 ₹82,875 Lowest |
| 4.00 | 10mm thick Cement Plaster 1:3 | 81 | Sqmtr | 211 ₹15,951.6 Lowest | 220 ₹16,632 |
| 5.00 | 10mm thick cement plaster 1:3 on floors. | 115.2 | Sqmtr | 163.28 ₹6,944.3 Lowest | 180 ₹7,655.4 |
| 6.00 | Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design | 40 | No. | 244.33 ₹17,103.1 Lowest | 250 ₹17,500 |
| 7.00 | Providing and fixing of Alfa valve of 160 mm dia complete Including all tax and charges | 27 | No. | 806.84 ₹21,784.68 Lowest | 900 ₹24,300 |
| 8.00 | Providing and fixing of Alfa valve of 225 mm dia complete Including all tax and charges | 15 | No. | 1,139 ₹17,085 | 700 ₹10,500 Lowest |
| 9.00 | Laying , fixing & jointing of uPVC Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications 160 mm o/d UPVC pipe of 2.5 Kgf. / sqcm | 1,867.5 | meter | 30.29 ₹56,566.58 Lowest | 37 ₹69,097.5 |
| 10.00 | Laying, fixing & jointing of uPVC Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications 225 mm o/d UPVC pipe of 2.5 Kgf. / sqcm | 1,037.5 | meter | 424.96 ₹4,40,896 | 47 ₹48,762.5 Lowest |
Tender Value
₹24.9 L
EMD Value
₹49,760
Closing Date
13 Mar 2026, 12:00 pmClosed
Executive Engineer Kandi Canal 1 and Ground water
Executive Engineer Kandi Canal 1 and Ground water HSP
ESTIMATE FOR THE EXTENSION OF ALREADY LAYED UNDERGROUND UPVC PIPELINE OF THE OUTLES 2170/L, 2730/L, 3145/R AND 3360/R OF GHOGRA DISTRIBUTARY AND 19700/R DIRECT OUTLET OF KANDI CANAL STAGE-1,HOSHIARPUR
2026_WR_162572_1
49
Open Tender
Civil Works - Others
Item Rate
60 days
Hoshiarpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Yes
₹49,760
Yes
8 Jun 2026
3 Mar 2026
13 Mar 2026
3 Mar 2026
13 Mar 2026
3 Mar 2026
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, including the cost of diversion for traffic, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work.
First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth
10mm thick Cement Plaster 1:3
10mm thick cement plaster 1:3 on floors.
Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design
Providing and fixing of Alfa valve of 160 mm dia complete Including all tax and charges
Providing and fixing of Alfa valve of 225 mm dia complete Including all tax and charges
Laying , fixing & jointing of uPVC Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications 160 mm o/d UPVC pipe of 2.5 Kgf. / sqcm
Laying, fixing & jointing of uPVC Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications 225 mm o/d UPVC pipe of 2.5 Kgf. / sqcm
Providing & fixing 225 mm Dia. Equal Tee (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.
Providing & fixing 160 mm Dia. Equal Tee (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.
Providing & fixing 160 mm Dia. elbow (90 Degree) (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.
Providing & fixing 225 mm Dia. elbow (90 Degree) (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.
Providing & fixing 160 mm Dia. Socket (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.
Providing & fixing 225 mm Dia. Socket (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.
Providing & fixing 160 mm Tail end point 6kg with M.S./C.I. flange (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.
Providing & fixing 225 mm Tail end point 6kg with M.S./C.I. flange (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge) (A) Class PN-1 as per ISI (g)160mm i/d Sluice Valves flanged
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge) (A) Class PN-1 as per ISI (g)225mm i/d Sluice Valves flanged
Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing all carriages complete (d) C.I Double air valve Screwed (Size 50mm)
Providing & fixing 160x50 mm Dia. MS Service saddle (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.
Providing & fixing 225x50 mm Dia. MS Service saddle (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.
Providing, laying, fixing, testing and commissioning of Class heavy duty MS Pipe conforming to IndianStandard IS:1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nutsbolts, gasketsetc. fixing the pipe on the wall /ceiling with suitable clamp sandpainting with two or more coats of synthetice paint of required shade complete in all respects. (d) 50mm internal diameter
Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. Size 0.6 m. x 0.6 m.
Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. Size 0.9 m. x 0.9 m.
Any other Csr Item
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.69 MB
BOQ_329501.xls
BOQ • 0.30 MB
corrcivil24032026.pdf
PDF • 0.35 MB
corrcivil18032026.pdf
PDF • 0.35 MB
corrcivil13032026.pdf
PDF • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .