GE(S)BTD TOKEN NO 41 OF 2021-22 SPECIAL REPAIR TO BLD NO P 08 1-12 (OR MD ACCN) P 74 (GUARD ROOM) ALONG WITH BATHROOM AND THREE TOILET BLOCK OF BLDG NO OP 02 UNDER AGE BRI AGE BR II AND AGE EM IV UNDER GE(SOUTH) BATHINDA AT BATHINDA MIL STN

Amount

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth, in layers not exceeding 25cm, watering,and removing surplus spoil to a distance not exceeding 50m and making good surface all as specified and directed.

S & F in repairs 15mm bore chromium plated brass bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15mm bore chromium plated quarter turn bib taps cast copper alloy with wall flanges, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15mm bore, chromium plated angle valves, cast copper alloy,screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F 15mm bore, chromium plated stop valves, cast copper alloy,screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F 15mm bore, chromium plated concealed type stop valves, cast copper alloy,screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repairs 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with o without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repairs brass chromium plated shower rose 125mm dia with swivel joints with and including suitable shower arm any size, complete all as specified and directed.

S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and directed.

S & F in repair PVC connection 15 mm size with brass nuts of length 450 mm of approved quality complete all as specified and directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified and directed.

S & F in repair PVC connection 15 mm size with brass nuts of length 600 mm of approved quality complete all as specified and directed.

S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed.

S&F 'in repair' vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and directed

S&F 'in repair' vitreous china wash basin, white, flat back, size 450 mm x 300 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and directed

S & F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm including waste fitttings and LDPE pipes complete all as specified

S&F stainless steel plate racks of size 900x600x250mm and thickness of SS strip of 1mm fixed wall etc. complete all as specified and directed .

Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exceeding half brick but not exceeding one brick complete all as specified and directed

S & F in repair PVC valveless, syphonic action type flushing cistern 10 ltr capacity, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connectin to flush pipe of any size and pattern complete all as specified and directed.

S&F in repair white flush pipe of polyethene of low or high density or PVC, 32mm dia, 90cm long for low level cistern and fixed complete all as specified and directed.

S & F in repairs CP grating (with or without waste hole), 125mm size, fixed on floor/nahani gully trap traps etc complete all as specified and directed.

S & F in repair drapery rod ( conduit) of dia not less than 25mm duly powder coated of shade as decided by Engineer-in-Charge including ABS plstic finials of approved shade and including standard MS powder coated brackets fixed to walls with rawl plugs and steel screws complete all as specified and directed.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S & F in repair single lever exposed shower mixer with provision for connection to exposed shower pipe & hand shower with connecting legs and wall flange complete all as specified and directed. Make:- Jaquar Cat Part No. LYR-38145 and SHA-1213 or as approved by GE from list of make attached in tender documents.

S & F in repair single lever wall mixer with provision of hand shower without hand shower for connection to exposed shower pipe and hand shower with connecting legs and wall flange complete all as specified and directed. Make:- Jaquar Cat Part No. LYR-38119 or as approved by GE from list of make attached in tender documents.

S & F brass chromium plated overhead shower dia 140mm round with rubit cleaning system with suitable shower arm 300mm length complete all as specified and directed. Make:- Jaquar Cat Part No. OHS-1757 or as approved by GE from list of make attached in tender documents.

S & F 15mm bore chromium plated fancy type brass bib tap long body, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Jaquar Cat part No. LYR-38037 or any other equivalent make approved by GE from the list of make attached tender documents.

S & F in repairs 15mm bore, fancy type, chromium plated, angle cock, cast coppler alloy, screwed both ends for iron pipe complete all as specified and directed. Make:- Jaquar Cat part No. LYR-38053 or any other equivalent make approved by GE from the list of make attached tender documents.

S & F table top basin of size 565x442x140mm vitreous china white including waste coupling complete all as specified and directed. Make:- Jaquar Cat part No. KVS-WHT-35935 or any other equivalent make approved by GE from the list of make attached tender documents.

Supply and fixing in repair 15mm bore, brass CP single lever basin mixer, screwed down, screwed for iron pipe, complete all as specified and as directed. Make:- Jaquar Cat Part No. LYR-38051B or equivalent model of approved make from list of make attached in tender documents.

S&F in repairs vitreous china wash down water closet pan with integral flushing cistern and seat cover single piece including connection to drain (or outgoing pipe) including all accessories for fixing and making the seat fully functional etc. complete all as specified and directed. Make:- Jaquar Cat Part No. OPS-WHT-15851SN or as approved by GE from list of make attached in tender documents.

S & F in repair health faucet brass body with wall hook and 1 mtr SS pipe complete all as specified and directed. Make:- Jaquar Cat Part No. ALD-577 or as approved by GE from list of make attached in tender documents.

S & F towel rack 600mm long with lower hanger complete all as specified and directed. Make:- Jaquar Cat Part No. ACN-1181FHS or as approved by GE from list of make attached in tender documents.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. Make:- Jaquar Cat Part No. AQN-7711 or as approved by GE from list of make attached in tender documents.

S & F chromium plated towel ring complete all as specified and directed. Make:- Jaquar Cat Part No. AQN-7721 or as approved by GE from list of make attached in tender documents.

S & F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and directed. Make:- Jaquar Cat Part No. ACN-1171N or as approved by GE from list of make attached in tender documents.

S & F in repair fancy type Corner glass shelf (25cm/30cm ) with CP brass bracket & railing etc; complete all as specified and directed. Make:- Jaquar- CAN-1173 or as approved by GE from list of make attached in tender documents.

S & F in repairs soap dish stainless steel complete all as specified and directed. Make:- Jaquar Cat Part No. AXP-35731P or as approved by GE from list of make attached in tender documents.

S & F in repairs Toilet paper holder recessed type stainless steel complete all as specified and directed. Make:- Jaquar Cat Part No.AXP-35753PS or as approved by GE from list of make attached in tender documents.

S & F peg set /coat hook ( set of 5 fixed on one strip), stainless steel as pe sample kept in AGE B/R office complete all as specified and directed.

M&L for 25 mm thick jet black granite work (table rubbed and polished) as in basin top, cooking platforms, steps, landings ,jambs and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade jointed over incl. 15 mm thick Screed bed or bedding layer in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement including necessary grouting and fiing with wall complete all as specified and directed

Roundening to the edge of stone slabs on edge such as plateform,steps and other similar situations complete all as specified and directed

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall, laid in trenches incl all fittings & accessories complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall, laid in trenches incl all fittings & accessories complete all as specified and directed.

S & F cast iron soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints laid in trenches/floors complete all as specified and directed.

S & F cast iron soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints fixed to walls with and including fixing clamps, complete all as specified and directed.

All as per item No.48 but except pipes

S & F cast iron soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints fixed to walls with and including fixing clamps, complete all as specified and directed.

All as per item No.50 but except pipes

S & F cast iron soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches or in floors complete all as specified and directed.

S & F in repairs CI bends any radius, 100mm bore, diminishing pieces or tapers, etc with oval access doors, complete all as specified and directed.

S & F in repairs CI bends any radius, 75mm bore, diminishing pieces or tapers, etc with oval access doors, complete all as specified and directed.

S & F in repairs 100mm bore CI branch pieces, single ( equal or unequal) ordinary or inverted (spigot or socketed type) or with parallel branches with oval access doors complete all as specified and directed.

S & F in repairs 75mm bore CI branch pieces, single ( equal or unequal) ordinary or inverted (spigot or socketed type) or with parallel branches with oval access doors complete all as specified and directed.

S & F in repair 100mm cast iron sanitary connection socket to fit WC outlet complete all as specified and directed.

S & F in repair 100mm bore cast iron cowl complete all as specified and directed.

S & F in repair 75mm bore cast iron cowl complete all as specified and directed.

Taking down or up 15 mm bore steel tubing and connection for refixing or removal complete all as specified and directed.

Taking down or up 20 mm bore steel tubing and connection for refixing or removal complete all as specified and directed.

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed.

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed.

Refixing old GI tubing 15 mm bore pipe and connections including cleaning in new or old position as on walls ceiling floors etc complete all as specified and directed. (i) Rates quoted by the contractor deemed to be included S & F new fittings as required.

Refixing only old GI tubing 20 mm bore pipe and connections including cleaning in new or old position as required on walls ceiling floors etc complete all as specified and directed. (i) Rates quoted by the contractor deemed to be included S & F new fittings

S & F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and directed.

S&F three layers rotational moulded polyethylene water storage tanks (ISI marked) (cylindrical vertical top) hoisted and fixed in position 500 litre capacity including dismantling water tanks and removing to store 500 ltr. Capacity complete all as specified and directed.

S&F three layers rotational moulded polyethylene water storage tanks of 1000 litre capacity white in colour (ISI marked) (cylindrical vertical top) hoisted and fixed in position including inlet, outlet fiting and supply and fixing in repairs 25mm bore PTMT float valve including dismantling water tanks and removing to store 1000 ltr. Capacity and complete all as specified in SSR Part-I and as directed.

S & F in repairs 110 mm bore PVC (SWR) of 6 kg/CM Square pressure fixed to walls with MS clamps of 25 x 3 mm flat iron and fixed with 75 mm long screw with PVC gutties not exceeding 1.80 mtr centre to centre distance complete all as specified and directed.

S & F in repair 75 mm bore of pipe PVC (SWR) single socket in any length with rubber ring joints, laid in floor, trenches or fixed to walls complete all as specified and directed

S & F 75 mm bore, PVC (SWR) fittings such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) fittings such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and directed.

M&L Mild Steel framed work of Gde Fe-410-0 or Fe-310-0 as in doors chowkats (single or double) of angles or other section with gusset plates, rails, braces, bands straps, hold fast grill, sink brackets, cooler stand etc, complete and including necessary welding for fixing flat iron for fixing hooks and hinges complete all as specified and directed.

Supply and fixing mild steel framed work such as grills,guard bars, gate, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe290,Gde-E-165 complete all as specified and as directed

Supply and fixing PTMT butt hinges, 100mm size fixed to PVC door with black coated screw complete all as specified and as directed .

Supply and fixing PTMT barrel tower bolt, 150mm long fixed to PVC door with black coated screw complete all as specified and as directed .

Supply and fixing PTMT handles, 150mm long with black coated screw complete all as specified and as directed by Engineer-in-Charge.

M&L welding in repairs with thickness of metal not exceeding 6mm and not exceeding 2.5 cm in length etc complete all as specified and directed.

S & F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250mm long and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S & F 250mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed

S&F of MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete as specified

S&F 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed complete all as specified and directed

S&F 125mm long mild steel pressed handles, oval type ISI marked stove enamelled black complete all as complete all as specified and directed

S & F floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed.

S & F in repair hasp & staple 100mm size, safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F hasp & staple 75mm size, safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips and S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeeding 0.50 Sqm in each panecomplete all as specified and directed.

S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeeding 0.50 Sqm in each pane complete all as specified and directed.

S & F 3.0mm thick figured glass, pin head type and glazing with oil putty in squares not exceeeding 0.50 Sqm in each pane complete all as specified and directed.

Dismantling boarding any description fixed in any position with rails including fillets complete all as specified and directed.

M & L for 18 / 19 mm thick prelaminated particle board (ISI marked), exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M&L 2nd HW plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, cross sectional area exceeding 3 sqcm and not exceeding 6 sqcm,complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.50 sqm each and removal from site complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) exc 1.50 sqm but not exceeding 4.00 Sqm each and removal from site complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing to store complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm of (thickness of steel sheet shall be 1.25mm) and making wood in CM (1:6) complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm of (thickness of steel sheet shall be 1.25mm) and making wood in CM (1:6) complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 75 x 60mm, of (thickness of steel sheet shall be 1.25mm) and making wood in CM (1:6) complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (using 20mm graded crushedstone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.

S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per specifications & drawing complete all as specified and directed.

S & F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings complete all as specified and directed.

S&F 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) complete all as specified and directed.

S&F 2nd class HW 35mm thick plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9mm thick B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F for steel windows/ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded, including steel window/ventilators complete all as specified and directed.

S&F for steel windows/ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with out glazing bars, , including steel window/ventilators complete all as specified and directed.

Supply and fixing steel windows or ventilators fixed type with glazing bars , including steel window/ventilators complete all as specified and as directed .

S& F aluminum powder coated vents including provision of necessary rubber gasket for fixing glass panes etc. complete all as specified and as directed. shown in drawing No. CE BT/SK-936 sheet 1/1. NOTE:- Glass panes shall be measured and paid for separately under respective item of BoQ.

S & F 5.5mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aperture 1.4mm and fixed with tinned tacks to stainless steel wire stapple complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aperture 1.4mm and fixed with tinned tacks to stainless steel wire stapple complete all as specified and directed.

S & F MS galvanised mild wire cloth 0.46 mm nominal dia of wire and avarage width of aparture 1.18mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified and directed.

M&L double action floor spring hydraulically regulated made up of min. 1.25 mm thk aluminium alloy sheet fdn box, main body with SS cover, governing pivot of brass, other part made of MS heavy duty and fixed complete all as specified and directed

S & F mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed.

Supply and fixing extruded aluminium anodised 100mm long butt hinges type B-21 with galvanised mild steel screws complete all as specified and as directed .

S & F 100mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 200 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 125mm long aluminium anodized handles cast type complete all as specified and directed.

S & F 150mm long aluminium handle anodized cast type complete all as specified and directed.

Supply only butt hinges, ISI market medium weilght cold rolled stainless steel and fixed complete all as specified and as directed 100 mm size complete all as specified and directed

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap (when open) 30mm complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismanling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughning of surfaces of old concrete floor picking, sweeping clean and washing down with water to remove dust, complete all as specified and directed.

M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed in CM 1:6 complete all as specified and directed.

M&L 25mm thick cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer complete all as specified and directed.

M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed in CM 1:4 including dismantling of old tiles of any description etc complete all as specified and directed.

M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in vertical surface as in skiting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick back plastering in CM 1:4 complete all as specified and directed.

M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in vertical surface as in skiting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick back plastering in CM 1:6 complete all as specified and directed.

M & L glazed ceramic coloured tiles 7mm thick 350mmx 250mm/450mmx300 mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade etc complete all as specified including 10mm thick plaster in CM 1:4 including dismantling of old tiles of any description etc complete all as specified and directed.

Cutting chases in brick walls girth exc 10 cm but not exc 20 cm wide for concealed water tubing etc and making good in CM 1:3 or PCC 1:2:4 as required complete all as specified and directed.

Supply and fixed in repair cast iron nahani trap 75mm dia with CP grating including jointing to waste pipe complete jointed in cement mortar complete all as specified and as directed

Supply and fixing in repair cast iron floor trap, 75mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP gratting of suitable size complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L for Kota stone slab 20 to 25 mm thick in riser of steps, skirting, dado and pillar set and jointed in 20 mm CM (1:6) with neat cement slurry and pointed in white cement paste pigmented to the match the shade of slab laid over rendering in cement mortar including rubbing and polishing complete all as specified and directed .

Demolition of re-inforced cement concrete of any description & in any position not otherwise specifically provided for, complete all as specified and directed.

Demolition of cement concrete of any description & in any position not otherwise specifically provided for, complete all as specified and directed.

M & L for reinforcement cement concrete (1:2:4) type B1 using 20mm aggregate as in slab supported on walls beams and columns in floor, roof, landing and in kitchen shelves and the like complete all as specified and directed

M&L for mild steel TMT bars 10 mm dia and over, cut to length bent to shape required including cranking, bending spirally etc and binding with mild steel wire not less than 0.9 mm dia as in reinforcement etc. complete all as specified and directed.

Supply and fixing galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed by Engineer-in-charge.

Supply only chain link MS galvanisd fencing of mesh size 50mmx50mm or 100mmx100mm and dia of wire not less than 3mm complete all as specified and directed by Engineer – in - Charge. Note:- The weight of the chain link fencing shall be measured by board ordered by GE.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provison of binding wire complete all as specified and directed.

Supply and fixing MS work such as flat iron, angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed.

Supply only round mild steel bars 10mm dia and over complete all as specified and directed.(Fixing including in item No. 144 here-in-before)

Supply only steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 40mm long and dia of shank 10mm complete all as specified and directed. (Fixing including in item No. 144 here-in-before)

Formwork for rough finished surfaces to soffit of suspended slab such as roof slab, floor slab/chajjas /beams/colns/fins/facia and etc not exceeding 200mm thick complete all as specified.

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

Demolition of brick work of any type built in cement mortor in foul condition etc complete all as specified and directed

M&L brick work in cement mortar 1:6 with sub class `B' old size bricks straight or curved on plan exceeding 6.0m mean radius built complete all as specified and directed.

M&L half brick work in cement mortar (1:4) with sub class 'B' bricks, straight or curved on plan to any radius etc; complete all as specified and directed.

Demolition of cement concrete (unreinforced) not exceeding 15 cm thickness (below or above ground level)incl rubbish off the premises complete all as specified and directed.

M&L PCC 1:3:6 type C-2 using 40mm graded crushed/stone agg for foundations, filling & mass concrete, sub-base & sub-floors, etc. complete all as specified and directed.

M&L PCC 1:5:10 type E-2 using 40mm graded crushed/stone agg for foundations, filling & mass concrete, sub-base & sub-floors, filling of sunken floors etc. complete all as specified and directed.

Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:- (a) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound as per manufacturer's instruction trowel even and smooth with steel trowel on sunken surfaces (Note : WPC shall be measured and paid separately) (b) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (c) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (d) Applying second coat of chemical Pidifin 2K (Dr Fixit) @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers.

Supply only Integral water proofing compound complete all as specified and directed. Make Dr. Fixit or any other equivalent make from list of make attached in tender documents as approved by GE.

M & L for applying a coat of cold bituminous [email protected] Ltr/Sqm over RCC/plastered roof surface and flashing etc followed by APP modified five layer ploymeric membrane minimum 3mm thick, minimum wt 3.00 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150gms/Sqm ) manufactured by any manufacturer as per list of make in tender documents approved by GE, laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required complete all as specified and directed.

Taking down cement or cement lime plaster of any description from brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed .

Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement complete all as specified and directed.

Material and labour for 15mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement complete all as specified and directed.

Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Dismantling bricks laid flat or on edge and pointed in any mortar etc. (each layer) complete all as specified and directed.

M& L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces using water proofing compound as per manufacturer's instructions and finishing even & smooth incl preparation of these surfaces for further treatment, complete all as specified and directed. (Note:- WPC shall be measured and paid separately under appropirate item in this BOQ).

M & L for rendering 5mm thick in CM 1:4 over 10mm thick additional setting/floating coat in CM 1:4 on concrete surfaces of wall chajjas, beams and ceiling etc and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exceeding 15 cm but not exceeding 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc.

M&L for applying two coats of oil bound distemper ( to match the adjacent shade or tint) over a coat of primer on newly plastered surfaces on walls including preparation of surface complete all as specified

M&L for applying two coats of oil bound distemper ( to match the adjacent shade or tint) over a coat of primer on old untreated plastered surfaces on walls including complete removal of existing treatment on walls and ceiling surfaces and remove vegetable/plants roots from walls/chajjas & preparation of surfaces for further treatment, etc complete all as specified and directed.

M&L for applying three coats of white wash on newly plastered surfaces on wall including preparation of surface, complete all as specified and directred

M&L for applying three coats of white wash on newly plastered surfaces on wall including complete removal of existing treatment on walls surfaces and remove vegetable/plants roots from walls/chajjas & preparation of surfaces for further treatment, etc complete all as specified and directred

M&L for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc including preparation of surface, complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc including preparation of surface including complete removal of existing treatment on ceiling surfaces and remove vegetable/plants roots from walls/chajjas & preparation of surfaces for further treatment, complete all as specified and directed.

M&L for applying three coats of white wash on newly plastered surfaces on ceiling complete all as specified and directred.

M&L for applying three coats of white wash on old untreated plastered surfaces on ceiling including complete removal of existing treatment on ceiling surfaces and remove vegetable/plants roots from walls/chajjas & preparation of surfaces for further treatment, complete all as specified and directred.

M & L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old painted wooden and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint, quality, colour on these surfaces, complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint, quality, colour on these surfaces, complete all as specified and directed.

M & L for preparing surfaces of steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.

M & L for preparing surfaces of steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.

M & L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint including preparation of surfaces complete all as specified and directed.

Complete removal of existing treatment on Old Internal wall surfaces of any desciption, preparation of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology, complete all as specified and applying the following :- (a) M&L for wall care putty in two layers on wall surface and smoothening the surface with sand papers / Mechanised sanding etc preparatory to paint as directed complete all as specified (b) M&L for two coat of Oil Bound distemper of approved tint over a coat of primer on old prepared surface by using Airless spray/Roller complete all as specified. Note:- Contractor may use manual scraping tools for complete removal and surface preparation with prior approval of Engr-in-Charge in case of using of Mechancal equipement are not possible.

Preparation of New plastered Internal wall surface complete all as specified complete all as specified and applying the following:- (a) M&L wall care putty in two coats on wall surface and smoothening the surface with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified. (b) M&L two coat of Oil Bound distemper over a coat of chalk whitening priming by using Airless spray/Roller complete all as specified. Note:- Contractor may use manual scraping tools for complete removal and surface preparation with prior approval of Engr-in-Charge in case of using of Mechancal equipement are not possible.

Preparation of New external plastered wall surface complete all as specified complete all as specified and applying the following:- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified. (b) two coat of exterior acylic emulsion by using Airless spray/Roller over and including a coat of acrylic emulsion external primer complete all as specified. Note:- Contractor may use manual scraping tools for complete removal and surface preparation with prior approval of Engr-in-Charge in case of using of Mechancal equipement are not possible.

Complete removal of existing treatment including filling depression of scraped surface with wall putty two coats 1.5mm thick each coat on Old external wall surfaces of any description, preparation of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology , complete all as specified and applying the following:- (a) M&L for two coats of exterior acylic emulsion by using Airless spray/Roller over and including a coat of acrylic emulsion external primer complete all as specified. Note:- Contractor may use manual scraping tools for complete removal and surface preparation with prior approval of Engr-in-Charge in case of using of Mechancal equipement are not possible.

M&L for 60mm thick machine pressed precast concrete interlocking pavers/tiles with grey cement and no pigment, confirming to IS 15658-2006 M-35 Grade,of any size & shape as directed in floors over & including 25mm thick sand screed beding/cushioning etc complete all as specified and directed

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc., laid bedded and pointed in any mortar complete all as specified and directed

M&L in repairs marble work (Udaipur green slabs) not less than 18 mm to 20mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade all as specified including rounding the edges over & including 15mm thick screed in cement mortar 1:4 complete all as specified and directed

Dismantling of brick tiles or terracing tiles, single layer on roof and disposal off retrieved material up to a distance of not exceeding 100m where directed, all as specified.

Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) including removing the demolished material upto a distance not exceeding 100 m away from site and disposal in low lying area complete.

M & L for wire brushing and cleaning top surface of roof slabs etc including washing the roof surface with water and making the surface free from mud etc complete all as specified.

M&L rendering 15mm thick in Cement mortar 1:3 ( average thickness) on roof surface including flashing and junctions of parapets etc finishing top surface even & fair including mixing with water proofing compound as per recommended ratio after brushing cement [email protected]/Sqm complete all as specified and directed. (Note:- WPC shall be measured and paid separately)

Material and labour for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement concrete 1:2:4 type B1 and finished the surface in cement mortar 1:3 complete all as specified and as directed by Engineer-in-Charge.

M & L for lime concrete in lime mortar ratio 1:3 using 40mm brick aggregate laid to slope/level over RCC roof as padding as directed complete all as specified and directed.

M & L for factory made cement concrete tiles with grey cement and pigments, 25cm x 25cm x 20 to 22 mm thick, jointed and pointed in neat cement slurry pigmented to match colour of tiles over & including 15mm thick screed in cement mortar 1:4 as in floors, tread, riser, ramp & paths etc.; including joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement on lime concrete complete all as specified

M&L for cement concrete type B1, 1:2:4 mix (using 20mm graded crushed stone aggregate) as in winow cill steps, bedding, benching of manholes, copings, roof kerbs & surface channel etc. , rounded or chamfered edges where required complete all as specified and directed.

M&L for cement concrete type B0, 1:2:4 mix (using 12.5mm graded crushed stone aggregate) using water proofing compound along side wall adjoining to roof in concave shape complete all as specified and directed.

M & L 75mm thick, cement concrete 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth (without using extra cement) complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc complete all as specified and directed.

Taking down rain water pipe any size including all fittings complete all as specified and directed.

Taking down carefully existing unserviceable copper point wiring (light, fan, socket) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, etc and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and directed.

Material and Labour for point wiring with multi stranded copper conductor FRLSH cable, 1100 volts grade PVC insulated and unsheathed of size 1.5 Sqmm single core in and including PVC concealed conduit not less than 20mm dia ( medium quality ISI marked) and conduit fittings and MS sunken box of suitable size covered with and including 3 mm thick bakelite laminated sheet top cover for one fan / light controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly including cutting chasing of wall and making good disturbed surface in CM (1:3) and finishig the surface to match complete all as specified and directed .Note:- ( Switch and socket etc shall be measured and paid separately under approriate items of BOQ).

All as per item No 202 here in before but for socket outlet 5 pin, 6 Amp on same board complete all as specified and directed .

All as per item No 202 here in before but for socket outlet 5 pin, 6 Amp on independent board complete all as specified and directed .

All as per item No 202 here in before but for one light point controlled by two way complete all as specified and directed .

All as per item No 202 here in before but for call bell point complete all as specified and directed .

All as per item No 202 here in before but for one socket outlet 6 pin, 6/16 Amp with cable of 2.5 Sq mm, multi stranded copper conductor FRLSH cable on the independent board including provision of 2.5 Sq mm PVC insulated unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly complete all as specified and directed .

S& F switch piano flush type, 5 Amp 240 Volt, AC one way etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing Switch piano, flush type, two way, 5Amps 230 V AC complete all as specified and as directed

S&F single pole bell push flush type switch, 5 Amps, 250 volts AC, complete all as specified and directed by Engineer-in-charge.

S&F one socket outlet 5 Pin 5 Amp flush type 230 volts AC complete all as specified and directed by Engineer-in-charge. Note:- Switch and socket shall be of same make.

S&F one switch and one socket outlet 3 Pin 15 Amp 230 volts AC complete all as specified and directed by Engineer-in-charge. Note:- Switch and socket shall be of same make.

S & F stepped type electronic fan regulator suitable for 1200/1400mm ceiling fan flush type on the existing phenolic laminated sheet etc. as required complete all as specified and directed.

S & F for call bell AC, 230 Volt, complete all as specified and directed.

Material and Labour for point wiring with multi stranded copper conductor FRLSH cable, 1100 volts grade PVC insulated and unsheathed of size 1.5 Sqmm single core in and including PVC concealed conduit not less than 20mm dia ( medium quality ISI marked) and conduit fittings and including S & F of modular metal flush box concealed in walls with modular top cover plate with frame of size as per site requirement for housing switches, socket outlets, fan reulators etc for one fan / light controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly including cutting chasing of wall and making good disturbed surface in CM (1:3) and finishig the surface to match complete all as specified and directed .Note:- ( Switch and socket etc shall be measured and paid separately under approriate items of BOQ).

All as per item No. 215 here in before but for socket outlet 5 pin, 6 Amp on independent board complete all as specified and directed .

All as per item No. 215 here in before but for one socket outlet 6 pin, 6/16 Amp with cable of 2.5 Sq mm, multi stranded copper conductor FRLSH cable on the independent board including provision of 2.5 Sq mm PVC insulated unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly complete all as specified and directed .

S & F modular switch one way 6A, 1 module complete all as specified and directed.

S & F modular socket 6A, 2/3 pin combined 2 module complete all as specified and directed.

S&F mini mirror light indoor domestic mirror light luminarire with ploy carbonate cover suitable for 1x5 Watt complete with all accessories and ballasts including connections with twin core wire of suitable size complete all as specified and directed

Supply and fixing ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed .

Supply and fixing lamp holder angle/straight, polycarbonate body with back plate complete all as specified and as directed.

Supply and fixing 9/10 Watt LED bulb suitable for fixing in lamp holder complete all as specified and as directed.

Supply and fixing single phase, 50 hz, 230 volt exhaust fan of size 300 mm sweep( metal body) having energy efficient including making opening in wall for fixing exhaust fan and making good the disturbed surface by applying existing periodical treatment including making connection and providing 3 core copper conductor cable of suitable size complete all as specified and as directed .

Supply and fixing heavy duty plastic body ventilation fan of 220/225mm sweep, 240 V complete with louvers and shutter and mounted in suitable opening arrangement in wall/window and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including fixing of exhaust fan including grouting of bolts, nuts etc. complete all as specified and as directed .

Supply and fixing MCB, SP, 6 to 32 Amps, 'C' curve, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection complete all as specified and as directed .

Supply and fixing MCB, SPN, 32 Amps, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection,50 Hz including necessary attachment complete all as specified and as directed .

Supply and fixing MCB, SPN, 40-63 Amps, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection,50 Hz including necessary attachment complete all as specified and as directed .

Supply and fixing MCB, TPN, 63 to 100 Amp, 230 Volts, 'C' curve breaking capacity not less than 10 KA with over load and short circuit protection,50 Hz including necessary attachment complete all as specified and as directed.

Supply and fixing sheet metal enclosures double door made out of CRCA mild steel sheet, flush mounted, acrylic door, 8 way, DB SPN 230 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB's and Isolators etc including taking down old unserviceable sheet metal enclosure complete all as specified and as directed .

Supply and fixing sheet metal enclosures double door made out of CRCA mild steel sheet, flush mounted, acrylic door, 4 way, DB TPN 230 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB's and Isolators etc including taking down old unserviceable sheet metal enclosure complete all as specified and as directed .

S & F blanking plate etc complete all as specified and as directed .

S&F in replacement single pole and neutral enclosure 240V with a two pin and earth plug and socket complete with one single pole MCB 20Amp complete all as specified and direcetd

Supply and fixing in repairs sub main wiring with 2 single core cable multi-stranded PVC insulated FRLSH cable unsheathed 1100 volts grade with copper conductor of size 6 sq mm drawn in and including PVC concealed conduit (20 mm dia, medium grade), cutting of chases in wall / ceiling including earth continuity conductor cable of size 6 sq mm PVC insulated unsheathed copper conductor cable connected to common earth and earth dolly complete all as specified and as directed . Note : Three length of 6 sqmm cable will be measured as one length for payment

Supply and fixing in repairs sub main wiring with 2 single core cable multi-stranded PVC insulated FRLSH cable unsheathed 1100 volts grade with copper conductor of size 4 sq mm drawn in and including PVC concealed conduit (20 mm dia, medium grade), cutting of chases in wall / ceiling including earth continuity conductor cable of size 4 sq mm PVC insulated unsheathed copper conductor cable connected to common earth and earth dolly complete all as specified and as directed . Note : Three length of 4 sqmm cable will be measured as one length for payment

S&F in repair LED light fitting 9/10W bulkhead luminaires incluing LED light, driver, holder connecting up with three core flexible copper conductor cable of suitable size complete allas specified and directed

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F decorative wall light fixture made of polycarbonate suitable for retrofit 07 watt LED lamp, with min 900 lumen output base B-22 complete with & including one lamp 07W LED lamp(base B-22), 6500K, complete all light fittings connection all as specified and directed.

S & F decorative wall light fixture made of polycarbonate suitable for retrofit 10 watt LED lamp, with min 900 lumen output base B-22 complete with & including one lamp 07W LED lamp(base B-22), 6500K, complete all light fittings connection all as specified and directed.

Supply and fixing LED street light fitting 45Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection ncluding fixing with GI/MS bracket made out of suitable size of light grade tube upto 1.5 mtr length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection including twin core round copper conductor cable of 1.50 metre long twin core round copper conductor cable of suitable size and testing complete all as specified and directed.

S & F LED security light fitting 24/25 watt next generation LED security light with pressure dir-cast housing along with preimatic polycarbonate modular secondary lens optics for city road application with IP66 ingress protection and impact resistance of IK08. 4KV inbuilt surge protection with top opening driver cover for easy maintenance with complete accessories and GI bracket made out of suitable size of light grade GI pipe 32/40 mm dia upto 1.2 mtr length cut to length, bent to shape with 02 sets of MS clamps made out of 25X3 mm MS flat iron with suitable bolt and nuts and testing complete all as specified and directed.

Taking down serviceable/unserviceable ceiling fans 1200/1400mm sweep 230 V, AC, single phase from quarters, dismantling the ceilling fan and taking out complete rewinding (if unserviceable) the same with super enameled copper winding wire of existing gauge & size including thoroughly cleaning all the components of fan, oiling varnishing the fan with and including replacement of rusted/unserviceable nuts, bolts, split pin, rubber reel, flexible twin core copper cable of size 23/.00076 approximate one metre long for each fan, machine screws etc, refixing the repaired fan to respective qtrs complete all as specified and directed.

Taking down ceiling fan, dismantling blades and removing fan and blades to store, Painting of fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc and refixing ceiling fan and connecting up including provision of cable from ceiling rose or connector of fan complete all as specified and directed

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burred in ground vertically earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of GI nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate upto 5 mtr and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame including taking down old unserviceable earthing material all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion.

Note:- If at site any nos of geyser, ceiling fan, exhaust fan, electric meter is found before starting the work, The contractor should hand over these items to unit Rep in writing to avoid the last minute complicacies and refixing of electric meter is the sole responsibility of the contractor before handing over the site to user.

Note:- Net contract sum shall be calculated after deduction of Sch of credit of Rs. 95469.00

RAMA AUTOS

Easyways Enterprises