Supply Erect. Comm. of various electromechanical equipment like 3 No. 5 Cs. VT Pump, Electric Motors, Starter Panel and other allied material for flood protection works from the field area of village Ghuskani Outfall at RD 8350L of Nigana Feeder

Supply, Erection & Commissioning of 5 C/s axial/Mix Flow Water lubricated Vertical Flood Pumps of 5 Cs. Discharge at 1440 RPM at static head of approx 6.0 Mtr. having adjustable height, including MS Bend including flange welding, SS/HT Nut & Bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department

Supply, Erection & Commissioning of solid shaft Motor of capacity 30 HP, 1440 rpm, 3 Phase, 380 Volt+- 10%, with eficiency class IE2 (with 35 Mtr compatible 3 Phase Submersible Cu cable from motor to panel/starter) suitable for fitment with 5 Cs. V.T axial/mix flow pump type vertical flange mounted as per approved specifications of the department.

Supply, Erection & Commissioning of fully automatic Star Delta Starter of cap. 150 Amp Including all accessories as one incomer of MCCB (150Amp) with 1 No MCB for lighting load, Contactor rating 120 Amp, 90 Amp, 70 Amp with control transformer for control supply, outgoing indicator, having MPR & all types of protections i.e.UV/OV/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, Digital meters, Push buttons, bus bars, capacitor bank, seperate relay for single Phase protection etc. complete in all respect suitable for open fields operation of 1 No. Motor of capacity of 30 HP with a stand of MS channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type.

Supply, Erection & Commissioning of M.S delivery Pipe 10" dia. made of MS Plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & Make. (Including SS/HT Nut & Bolt, Rubber packing & other fitment accessory required)

Supply, erection and commissioning of MS Girder parallel flange section ISMB 150 with primer and Bituminous Based Paint inside & outside of length 4mtr (Approx wt 60 KG per Pc) as per approved make & conforming to IS808:2021.