Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.9 LAccepted-AOC VIVEKANANDA SUPER MARKET IST FLOOR ROOM NO 8 HILL CART ROAD PO SILIGURI DIST DARJEELING PIN 734401 | DARJEELING | WEST BENGAL | 734401 | ₹43.9 L Quoted ₹44.8 L | L1 | Accepted-AOC LOWEST BIDDER |
| 2 | L2₹48.6 L+₹3.8 L (8.41%)Rejected-Finance JYOTIRMAY COLONY WARD NO 32 P O SILIGURI BAZAR P S BHAKTINAGAR SILIGURI JALPAIGURI 734005 | SILIGURI | JALPAIGURI | WEST BENGAL | 734005 | ₹48.6 L+₹3.8 L (8.41%) | L2 | Rejected-Finance NOT LOWEST BIDDER |
| 3 | L3₹49.0 L+₹4.2 L (9.28%)Rejected-Finance DESHBANDHUPARA PO SILIGURI TOWN DIST DARJEELING PIN 734004 | JALPAIGURI | WEST BENGAL | 734004 | ₹49.0 L+₹4.2 L (9.28%) | L3 | Rejected-Finance NOT LOWEST BIDDER |
| 4 | L4₹49.7 L+₹4.9 L (10.9%)Rejected-Finance RABINDRA NAGAR P O RABINDRA SARANI SILIGURI 734 006 DIST DARJEELING W B | JALPAIGURI | WEST BENGAL | 734006 | ₹49.7 L+₹4.9 L (10.9%) | L4 | Rejected-Finance NOT LOWEST BIDDER |
| 5 | L5₹50.0 L+₹5.2 L (11.5%)Rejected-Finance 75 VIDYAPITH ROAD DESHBANDHU PARA SOUTH PO SILIGURI TOWN DIST DARJEELING WB PIN 734004 WB | JALPAIGURI | WEST BENGAL | 734004 | ₹50.0 L+₹5.2 L (11.5%) | L5 | Rejected-Finance NOT LOWEST BIDDER |
| Sl No | Description | Qty | Unit | G C DUTTA N CO L8 | M/S B B CONSTRUCTION L3 | M/S JAGRITI ENTERPRISES L1 | Janata Enterprises L7 | M/S DAWN ELECTRICAL INDUSTRIES L4 | M/S. KARMAKAR ENGINEERING COMPANY L2 | SHRI ARUN BHATTACHERJEE L5 | D K SARKAR L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | S&F in replacement non asbestos fibre cement building boards 4 mm thick E-Board (designer pattern) fixed or laid / inserted to GI framework with screws in false ceiling (flat or sloping) and including GI frame work comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with contacting clips across the intermediate channel at 457 mm centre to centre hanging from structural steel / scantling with 6 mm GI wire complete all as specified and directed. | 150 | Sqm | 1,170 ₹1,75,500 | 1,145 ₹1,71,750 | 970 ₹1,45,500 Lowest | 1,160 ₹1,74,000 | 1,145 ₹1,71,750 | 1,140 ₹1,71,000 | 1,150 ₹1,72,500 | 1,175 ₹1,76,250 |
| 2.00 | M&L for Precast Reinforced Cement concrete 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) in 25 mm thick (measured solid) Jallies or louvers including all mouldings set jointed in CM 1:4 but excluding frame including demolition of existing cement concrete complete all as specified and directed. | 80 | Sqm | 1,005 ₹80,400 | 982 ₹78,560 | 760 ₹60,800 Lowest | 990 ₹79,200 | 990 ₹79,200 | 980 ₹78,400 | 1,000 ₹80,000 | 945 ₹75,600 |
| 3.00 | Dismantling of corrugated or semi corrugated Asbestos Cement (AC) sheets in roof covering complete all as specified and directed. | 80 | Sqm | 67 ₹5,360 | 63 ₹5,040 | 65 ₹5,200 | 63 ₹5,040 | 70 ₹5,600 | 65 ₹5,200 | 60 ₹4,800 Lowest | 62 ₹4,960 |
| 4.00 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. | 80 | Sqm | 1,077 ₹86,160 | 1,045 ₹83,600 | 1,025 ₹82,000 Lowest | 1,070 ₹85,600 | 1,100 ₹88,000 | 1,050 ₹84,000 | 1,070 ₹85,600 | 1,120 ₹89,600 |
| 5.00 | M&L rolled mild steel conforming to Fe 290 (Gde E-165), in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) and including distance pieces, cleats etc. complete all as specified and directed. | 40 | KG | 152 ₹6,080 | 150 ₹6,000 | 138 ₹5,520 Lowest | 150 ₹6,000 | 150 ₹6,000 | 148 ₹5,920 | 150 ₹6,000 | 140 ₹5,600 |
| 6.00 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. | 0.5 | KG | 13.5 ₹6.75 | 8 ₹4 | 5 ₹2.5 Lowest | 8 ₹4 | 10 ₹5 | 7.5 ₹3.75 | 10 ₹5 | 18 ₹9 |
| 7.00 | M&L in repair to broken/damaged RCC chajjas by making good with PCC 1:2:4 type B1 or cement mortar 1:3 rendering 15mm thick mixed with water proofing compound to top & sides and soffits in cement mortar 1:4 including necessary form work, reinforecement duly welded if required including demolition of broken/loose PCC or taking down old plaster upto a height of 9mtrs complete all as specified and as directed. | 5 | Sqm | 534 ₹2,670 | 525 ₹2,625 | 515 ₹2,575 | 500 ₹2,500 Lowest | 525 ₹2,625 | 520 ₹2,600 | 550 ₹2,750 | 500 ₹2,500 Lowest |
| 8.00 | M&L cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement with pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors laid over and including 15 mm thick screed bed in CM 1:4 and including dismantling complete all as specified and directed. | 80 | Sqm | 1,047 ₹83,760 | 1,050 ₹84,000 | 1,020 ₹81,600 Lowest | 1,020 ₹81,600 Lowest | 1,100 ₹88,000 | 1,020 ₹81,600 Lowest | 1,050 ₹84,000 | 1,200 ₹96,000 |
| 9.00 | M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc.0.06 sqm but n. Exc. 0.11 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6 finish even and rough and including dismantling complete all as specified and directed. | 50 | Sqm | 1,005 ₹50,250 | 1,010 ₹50,500 | 990 ₹49,500 | 990 ₹49,500 | 990 ₹49,500 | 980 ₹49,000 Lowest | 1,000 ₹50,000 | 1,045 ₹52,250 |
| 10.00 | Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge. | 50 | Per Point | 26 ₹1,300 | 22 ₹1,100 | 25 ₹1,250 | 25 ₹1,250 | 30 ₹1,500 | 25 ₹1,250 | 30 ₹1,500 | 20 ₹1,000 Lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
14 Aug 2025, 6:00 pmClosed
Garrison Engineer Sukna
Garrison Engineer Sukna, Post-Simulbari, Dist-Darjeeling, WB-734009
REPAIR MAINTENANCE OF CEILING FAN EXHAUST FAN PEDESTAL FAN AIR CIRCULATOR AND ALLIED WORKS OF SUKNA AND U AREA UNDER GE SUKNA
2025_MES_722297_1
GE Sukna/8869
Open Tender
Civil Works
Works
270 days
Sukna
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE Sukna
₹80,000
6 Oct 2025
24 Jul 2025
16 Aug 2025
24 Jul 2025
14 Aug 2025
7 Aug 2025
24 Jul 2025 - 14 Aug 2025
Amount
S&F in replacement non asbestos fibre cement building boards 4 mm thick E-Board (designer pattern) fixed or laid / inserted to GI framework with screws in false ceiling (flat or sloping) and including GI frame work comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with contacting clips across the intermediate channel at 457 mm centre to centre hanging from structural steel / scantling with 6 mm GI wire complete all as specified and directed.
M&L for Precast Reinforced Cement concrete 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) in 25 mm thick (measured solid) Jallies or louvers including all mouldings set jointed in CM 1:4 but excluding frame including demolition of existing cement concrete complete all as specified and directed.
Dismantling of corrugated or semi corrugated Asbestos Cement (AC) sheets in roof covering complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed.
M&L rolled mild steel conforming to Fe 290 (Gde E-165), in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) and including distance pieces, cleats etc. complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.
M&L in repair to broken/damaged RCC chajjas by making good with PCC 1:2:4 type B1 or cement mortar 1:3 rendering 15mm thick mixed with water proofing compound to top & sides and soffits in cement mortar 1:4 including necessary form work, reinforecement duly welded if required including demolition of broken/loose PCC or taking down old plaster upto a height of 9mtrs complete all as specified and as directed.
M&L cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement with pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors laid over and including 15 mm thick screed bed in CM 1:4 and including dismantling complete all as specified and directed.
M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc.0.06 sqm but n. Exc. 0.11 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6 finish even and rough and including dismantling complete all as specified and directed.
Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge.
M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including PVC casing caping (double lock pattern) and accessories on wall / ceiling surfaces etc. with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc including all other fixing accessories for one light / fan / exhaust fan point controlled by one 5 / 6 Amps switch complete all as specified and directed.
S&F switch piano flush type one way, 5 / 6 Amps, 240 volt complete all as specified and directed.
S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed.
Taking down ceiling fan 1200 mm to 1400 mm sweep of any make sealing cable ends, dismantling blades , one coat painting with synthetic enamel paint by spraying after cleaning thoroughly with kerosene oil including filling cavities with filler etc, hanging the ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan, complete all as specified and as directed by Engr In Charge. Note :- Cost of spares / rewinding of motor will be measured and paid separately.
Taking down exhaust fan 200 mm to 450 mm sweep of any make sealing cable ends, dismantling blades ,one coat painting with synthetic enamel paint by spraying after cleaning thoroughly with kerosene oil including filling cavities with filler etc, refixing the same in original position including provision of cable from ceiling rose or connector to fan, complete all as specified and as directed by Engr In Charge. Note:-Cost of spraes / rewinding of motor will be measured and paid separately.
Supply only of capacitor 1.5 mfd, 230 Volts, AC, 50 Hz, complete all as specified and as directed.
Supply only of capacitor 2.5 mfd, 230 Volts, AC, 50 Hz, complete all as specified and as directed.
Supply only of capacitor 3.15/3.5 mfd 230 Volts, AC, 50 Hz, complete all as specified and as directed.
Supply only of Gun Metal Bush suitable for wall Fan /Exhaust Fan complete all as specified and as directed.
Supply only of Ball Bearing of suitable size for Ceiling Fans 1200 mm to 1400 mm sweep complete all as specified and as directed.
Supply and fitting GI pipe tube of size 40 mm medium grade in bldgs for hanging of ceiling fans including taking down of existing rusted pipe as per specified and directed by Engr- In - Charge.
Supply of MS down rod of size 15/20 mm dia and length 1' for ceiling fan including electric connection, nut, bolt and clamp as in repair complete all as specfied and directed.
Supply of MS down rod of size 15/20 mm dia and length 2' for ceiling fan including electric connection, nut, bolt and clamp as in repair complete all as specfied and directed.
Supply of MS down rod of size 15/20 mm dia and length 3' for ceiling fan including electric connection, nut, bolt and clamp as in repair complete all as specfied and directed.
Supply & fixed in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet including taking down old unsv complete all as specified and directed.
Supply & fixed in repair Modular stepped type electronic fan regulator, single phase , 2 Module, to be fixed on existing sheet including taking down old unsv complete all as specified and as directed.
Supply and fixed D clamp of strip size 25x6 mm with suitable washer,nuts, bolts in any shape or size as indicated or directed and inclusive of one primer coat ,one under coat, one finish coat of paint complete for hanging of ceiling fan all as specified and as directed.
Supply of rubber reel 1.7/2.5 insulator for Ceiling fan suitable for 1200/1400mm sweep complete all as specified and directed.
Supply of split pin suitable size for ceiling fan of sweep 1200mm/1400mm complete alll as specified and directed.
Supply of PVC connector for Ceiling fan of 1200/1400mm sweep including all connection complete all as specified and directed.
Supply and fixing in repair of new ceiling fan polished blades (set of three) of best quality for fan of size 1200/1400 mm sweep including taking down old unsv complete all as specified and as directed.
Supply and fixing in reapir of louvers for metallic body exhaust fans of size 200 to 300 mm sweep of any make complete including taking down old unsv complete all as specified and as directed.
Supply and fixing in repair of louvers for metallic body exhaust fans of size 380 to 450 mm sweep of any make complete including taking down old unsvall as specified and as directed.
M&L for Rewinding of ceiling fan 1200 mm sweep of any make with super enameled copper winding wire as per existing size and gauge including heating, varnishing, replacement of unserviceable/worn out parts for satisfactory running including electrically connected with flexible wire multi-stranded copper conductor cable of size 23/0.0076 from ceiling rose to fan and testing, complete all as specified and as directed.
M&L for Rewinding of ceiling fan 1400 mm sweep of any make with super enameled copper winding wire as per existing size and gauge including heating, varnishing, replacement of unserviceable/worn out parts for satisfactory running including electrically connected with flexible wire multi-stranded copper conductor cable of size 23/0.0076 from ceiling rose to fan and testing, complete all as specified and as directed.
Supply and fix of energy saving 1200 mm sweep BLDC ceiling fan complete with all connected accessories as specified below: - Input Power :- 26 watts with full speed and reduced power consumption with reduced speed technology. Voltage :- 90-300 V AC, 50Hz, single Phase. RPM :- 340 to 375 rpm Blades :- Decorated Sweep :- 1200 mm. Air delivery :- Not less than 210 CFM Colour :- Glow white/Toast Brown/Gloss Black/or others as approved by Engr-in-Charge Speed/power contro :- Without Remote through existing regulator Star rating :- BEE 5 Star Rating Warranty: - As specified by the manufacturer, contractor shall produce original warranty and test certificate from the manufacturer.
S&F Exhaust fan 250 mm sweep, non metallic made of study engineering plastic body, AC single phase, 230 V, 50Hz, RPM 1200, with & including self closing louvres, nuts, screws, bolts of specified sizes, electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed. Note: The quoted rate is including for taking down and depositing old fan to MES Store.
S&F Exhaust fan 300 mm sweep, non metallic made of study engineering steel body, AC single phase, 230 V, 50Hz, RPM 1400, with & including self closing louvres, nuts, screws, bolts of specified sizes, electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed. Note: The quoted rate is including for taking down and depositing old fan to MES Store.
S&F Exhaust fan 450 mm sweep, non metallic made of study engineering steel body, AC single phase, 230 V, 50Hz, RPM 1400, with & including self closing louvres, nuts, screws, bolts of specified sizes, electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed. Note: The quoted rate is including for taking down and depositing old fan to MES Store.
Supply and fixing of wall mounted air circulator high flow wave oscillating fan 400 mm (16 inches) with pull cord control,high speed motor for higher air delivery and TOP protection, 60W ,AC single Phase. 230V ,copper winding complete all as specified and diretced. Make :- Havells Swing High Speed Wall Fan/Bajaj/Orient/Crompton
M&L for Rewinding of metallic exhaust fan 200 to 300 mm sweep of any make with super enameled copper winding wire as per existing size and gauge including heating, varnishing, replacement of unserviceable/worn out parts for satisfactory running including electrically connected with flexible wire multi-stranded copper conductor cable of size 23/0.0076 from ceiling rose to fan and testing, complete all as specified and as directed.
M&L for Rewinding of metallic exhaust fan heavy duty 380 mm to 450 mm sweep of any make with super enameled copper winding wire as per existing size and gauge including heating, varnishing, replacement of unserviceable/worn out parts for satisfactory running including electrically connected with flexible wire multi-stranded copper conductor cable of size 23/0.0076 from ceiling rose to fan and testing, complete all as specified and as directed.
Taking down BLDC ceiling fan 1200 mm to 1400 mm sweep of any make sealing cable ends, dismantling blades,repairing and hanging the ceiling fan, connecting up including provision of cable from ceiling rose or connector to fan, complete all as specified and as directed by Engr In Charge. Note:-Cost of repairs / spares will be measured and paid separately.
Supply of blade assembly of BLDC fan any sweep complete all as specified and as directed.
Supply of PCB of BLDC fan any sweep complete all as specified and as directed.
Supply of stator assembly of BLDC fan any sweep complete all as specified and as directed.
M/S. KARMAKAR ENGINEERING COMPANY (BID ID -3393504)
M/S B B CONSTRUCTION (BID ID -3393109)
M/S DAWN ELECTRICAL INDUSTRIES (BID ID -3394099)
SHRI ARUN BHATTACHERJEE (BID ID -3393008)
D K SARKAR (BID ID -3393057)
Janata Enterprises (BID ID -3393288)
G C DUTTA N CO (BID ID -3391170)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .