Upgradation of Kasimedu Beach Chennai

Amount

CIVIL WORKS

REMOVING OF SCRUB JUNGLE

Clearing Heavy Jungle Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15cm deep and disposal of rubbish, lead up to 50m, and lift up to 1.5m of all kinds of soil

EARTHWORKS

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling M- sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supply & stacking of red earth at site to the departmental guage for pre- measurements which is of light textured, crystalline, porous and friable and not of generally acidic or neutral but not of alkaline and should be fertile, including seignior age charges, cost of transportation, loading, unloading, stacking and inclusive of all taxes etc., complete.

PLAIN CONCRETE WORKS

Providing and laying plain cement concrete 1 : 4 : 8 (1cement : 4 sand : 8 graded stone aggregate 40mm nominal size) in foundation and basement including dewatering wherever necessary and laid in layers not more than 15 cm thick and consolidation etc.

REINFORCED CEMENT CONCRETE

Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Raft, Grade beam, Shear wall, RCC walls, Lift walls, Plinth beams, Column, footings, Grade slab, Roof slab & beam, Curved slab, beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box binders basement retaining wall, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. Rate to include all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer- in-charge

REINFORCEMENT STEEL

Supplying, fabricating and fixing in position of steel Fe 500 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete / PVC cover blocks to maintain the cover as required.Rate to include all bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

FORM WORK

Providing formwork for centering shuttering etc. for all RCC works including strutting for height upto 3.29m using mild steel sheets of size 9 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., Rate to include all materials, labour charges, wastages , placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Client / Engineer-in-charge.

a) Centering column footings, column pedestals, plinth beams, grade beams, staircase steps, etc.

MASONRY WORK

Random rubble masonry using new stones in dry condition below ground level for Slope side including all incidental charges etc., complete complying with standard specification

PLASTERING WORKS

Plastering the outer wall surface in cement mortar 1:4 (one cement: four P sand) 12 mm thick in all floor levels .Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

FLOORING WORKS

Providing and Laying Granular sub base (GSB) by provided coarse graded material confirming to ( table 400-1) mixing in a mechanical mix plant at OMC carriage of mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacted with power roller to achieve the desired dry density to the required grade and cross slope as per drawings all others incidental charges etc.complete as per clause of 401 Morth Specification using Grade V metals for Bottom layer

Supplying And Fixing Rubber Moulded Interlocking Blocks Against Available Edge Restraints 60 mm Thick of Approved Design And Pattern of Strength 30 N/Sq.m. 10 mm Iss Metal With Minimum Cement Content As Applicable To M 30 Grade Concrete As Per Is-456-2000 Manufactures By Mechanical Or Hydraulic Machine Using Vibro- Compaction Process And Laid Over 50 mm Thick Laying Course (Bedding) Crushed Stone Sand (M Sand) Well Compacted By Plate Compactor With A Joint Width of 2 mm To 5 mm Including Filling of All Joints With Crushed Stone Sand (M Sand) And Compacting The Paved Surface With Plate Compactor Two Or Three Times Until All The Unit-To- Unit Joints Are Completely Filled With Crushed Stone Sand (M Sand) And Trimming The Edges Neatly Including All Labour Charges And Plate Compactor Charges Etc. Complete(Cost Inclusive of Crushed Stone Sand (M Sand)).

Providing And Fixing All Side Machine Cut Granite Stone Kerbs Using 0.40M Height 0.100M Thick And 0.6M Length Granite Stone Kerb Without Fragmentation For Platform Kerbs Including Cost And Conveyance of Granite Kerb From Available Source To Work Site Including Labour Charges For Fixing The Granite And Pointing With cm. 1:3 And All Other Incidental Charges Etc. Complete.

HAND RAIL

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

PLANTATION WORKS

Supplying of Supplying of Rectangle (4') pot of 122 inch dia and size 45*45 in Centimeter, Various size pots made up of 6mm rod & chicken mesh with cement moulded pots and designer painting with various size plates including loading and unloading charges, transportation, etc as directed by the site in

Supplying of Big Square pot of 38 inch dia and size 80*38 in Centimeter, Various size pots made up of 6mm rod & chicken mesh with cement moulded pots and designer painting with various size plates including loading and unloading charges,transportation, etc as directed by the site in-charge.

Planting of Wedelia trilobata foliage Ground cover variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Roystonea regia (Royal palms) palm variety of height 180-210 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Lilly foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Ixora dwarf varieties foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Acalypha varieties ornamental foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

MEP WORKS

PLUMBING WORKS

Drilling of 12" dia vertical borewell so as to have a finished size of 6" dia borewell in boulder area to any required depth as decided by the TWAD Board Officers including Transportation from one place to anothr place with in Tamilnadu State by direct or reverse rotary mud circulation method using Contractor's rig tools, fuel, labourers, bentonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit etc. using only calyx rigs.

Reaming from 200mm dia pilot bore to 350mm dia bore as direct by the Engineer incharge up to 80mtr depth ending below ground level

Supply and laying following dia PVC casing pipe with excise duty as per IS 12818 / 1992

200mm dia CS ( plain pipe )

200mm dia RS

150mm dia RS

Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer of Departmental officers.

200mm dia CS

200mm dia RS

150mm dia RS

Supplying and filling with river pebbles in annular space between bore and PVC pipe up to hard rock.

Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by 'V' notch method.

Supply ,erection and testing & commisioning of 3HP submersible pumpset in the to suit 200mm borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge and other required supporting items like SS hose nipple, nylon rope, clamps, bolt and nuts,GI nipple, 50mm dia HDPE hose of required length etc completed and as directed by the officer incharge.

Supplying and fixing in position best quality of HDPE pipes with ISI mark of following dia with specials including cost and coveyance of HDPE pipes and specials, labour charges for erection of pipes in the borewell and jointing materials etc., all complete as directed by the departmental officers.

INTERNAL DOMASTIC AND SOIL WASTE PIPE SYSTEM

Supplying and laying and jointing UPVC Pipe(Un-Plasticized Polyvinyl Chloride) UPVC used for commercial applications operate and designed to handle higher water pressure (schedule-80) but excluding cost of such specials and fixing in position dismantling masonry and make the same to original condition etc complete complying with standard specification and as directed by the departmental officers at site of work.

40 mm dia

Renewing and refixing following UPVC specials of approved qaulity and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

UPVC Elbow

Dia 40mm

UPVC BEND

Dia 40mm

UPVC TEE

Dia 40mm

UPVC REDUCER

Dia 40mm X 32 mm

RAIN WATER SYSTEM:

Supplying and fixing in position best approved of BIS quality RCC Hume rain water down fall pipes including cost of necessry shoe, bend, of required diameter , etc., complete complying with standard specification.

300mm diaRCC Hume Pipe

Construction of inspection chambers of following sizes 60 x 60 x 60cm with earth work excavation for foundation, 23cm thick concrete bed using 40mm brick jelly concrete in C.M.1:4:10 for foundation, brick work in C.M.1:6 for chamber, plastering with C.M.1:3, 12mm thick, benching, channelling, supplying and fixing 45x45cm FRC cover and frame, etc., complete for

Construction of inspection chambers of following sizes 60 x 60 x 90cm with earth work excavation for foundation, 23cm thick concrete bed using 40mm brick jelly concrete in C.M.1:4:10 for foundation, brick work in C.M.1:6 for chamber, plastering with C.M.1:3, 12mm thick, benching, channelling, supplying and fixing 45x45cm FRC cover and frame, etc., complete for

INTERNAL WATER SUPPLY SYSTEM

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Fixing Gun Metal Wheel Valve Dia 40mm

Supply and Fixing Syntex Water Tank 5000lits Capacity 2Nos

ELECTRICAL WORKS

"TNEB METERING BOARD Supply,installation and commissioning of TNEB Meter Board suitable for 3 Phases 100 A service connection made up of suitable iron angel frame work of size 2 feet x 1.5 feet using angle iron of size 1 1/2"" x 1 1/2 "" x 1/4"" rigidly fixed on wall covered with Hylem sheet of size 2 feet x 1.5 feet of 12 mm thickness with necessary bolts and nutts supports and Supply,installation and commissioning of 3 nos 100 A fuse units (500V) ,1 No Neutral link ,Copper flat of size 1"" x 1/4"" with interconnection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection and to complete the work etc.

Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter 1no, Main 200A 4Pole MCCB I/C, 4nos of 63A 4Pole MCCB's, and 4nos of 32A 4Pole MCCB's for O/G with suitable copper bus bar (33x6mm) having three phase Multifunction meter with line indicators for erecting the indoor panel board complete etc., The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete.

Supply and run of 50mm Dia HDPE pipe of 4kgf/cm2 approved quality and best variety conforming to ISS and ISI mark below ground in HDPE pipes

Supplying and laying of 3 1/2 C x 35 Sq.mm PVC armoured LTUG aluminium cable in the existing trench / hume pipe including transport charges of UG cable. ( SD-205 )

Supplying and laying of 2 C x 10 Sq.mm PVC armoured LTUG aluminium cable in the existing trench / hume pipe including transport charges of UG cable. ( SD-198 )

Supply and fixing of brass cable gland for 2C x 10 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc (SD-182)

Supply and fixing of brass cable gland for 31/2C x 35 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc (SD-187)

Supply and providing cable end termination of 31/2 x 35sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with eelctrical connection complete and etc to complete the work (SD-236)

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD-233)

Earthing as per PWD standard with an earth electrode of 2meter Class 'B' GI pipe of dia not less than 32mm complete with necessary masonary work (SD-234)

Supply and run of 25mm x 6.25mm Aluminium flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work.

Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8SWG GI wire at the equal interval of 1.5 meter and etc to complete the work (SD - 75)

Coil Earth to Street light poles with No 8 SWG GI wire of 11.5 Mtrs of length in which 10 mtrs of total length compressed in to a coil of one meter length (75 mm to 100 mm dia) connected suitable with Hexagonel earth bolt of size 8mm to 25 mm welded on the pole at one end with a coil position fixed on the earth and etc to complete the work (SD-78)

Outdoor lighting sub panel

Supply, Erection, Testing and Commissioning of the following Type outdoor lighting distribution panel with individual segegration chamber with MCCBs / MCBs /ELCBs, / RCCBs , Phase segegration Timer and contactor manufacturer's sheet 16SWG enclosure for with provision for cable entry boxes, with Outdoor application IP65 as specified Protection, fixed on the floor with all interconnections and accessories, pedestal frame with concrete grouting or suitable to fix at concrete plinth as per the Corporation/ Highway department requirement. Incomer 40 A TPN MCCB with Timer control On/OFF Outgoing : 20 A DP RCCB -30mA - 18 Nos

Supply and fixing of 7 segment 4 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only (SD 714)

Supply, erection testing and fixing of Empress 6mtr Lighting Pole with Double arm bracket and 30w LED Pelican Fort Mini fitting with the following specifications. Product Description • Pole design parameters vary depending on the type of bracket and loading factor. • All pole sections are welded using special v groove technique by certified welders using high end MIG welding processes. • Built-in control box with cast aluminium service door and safety rope. • Die cast aluminium door is contoured to the shape of the pole with silicone rubber gasket. • The control gear tray is prewired with MCB, terminal connectors for loop-in / loop-out arrangement. • The foundation bolt holes in the base plate are designed to be elongated for fine adjustments / alignment of the pole during installation. • Base plate made of steel grade E250 & foundation bolt of grade 4.6 • CE - Conformity mark Available Finish Coated with zinc rich primer and finished using environmentally stable polyurethane based paint / Pure polyester powder coated of desired colour. • Black The above post connected with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. Model No. KL-4980, KP-6118)

Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe with 2 mm thick, ISI marked concealed in wall and ceiling with PVC accessories with concealed type manufacturer's GI metal back box and 6A modular switch in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, for making good of the concealed portion with suitable colour for PVC concealed point (length of point 8 to 12 mtr) (SD-281)

Supply and fixing of manufacturer's GI metal back box and 16A modular switch, 6/16A 3 pin combined modular type wall socket concealed in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, in flush with wall.(SD 488)

Supply and Run of 2Run of 2.5 sqmm PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 2.5sq.mm PVC insulatated SC unsheated copper wireand making good of the concealed portion with suitable colour.(SD 428)

Supplying, installation, testing and commissioning of 1200 mm (48") sweep AC ceiling fan complete with out modular type stepped electronic 300W regulator, with 1 metre down rod with all required accessories.including point wiring ( 5 STAR )

Supply and fixing of 20W 4feet LED Tube Fitting with TW round blocks on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and etc to complete the work. (SD-87)

MISCELLANEOUS WORKS

Providing and injecting chemical emulsion for pre-constructional Anti-Termite treatment with minimum 10 years guarantee in three stages as given below, creating a chemical barrier under and all around the column pits, wall trenches, basement excavation, top surface of plinth & along the external perimeter of the building, expansion joints, surrounding of pipe and conduits etc., complete with chlorophyrifos 20 emulsifiable concentrate in proportion 1:19 (1 part of chlorophyrifos 20EC and 19 parts of water). Cost shall include all material and labour, etc. (Plinth Area at Ground Floor level only shall be measured and paid for). Treatment shall be carried out only through specialised and approved agency.

Container Toilets

Container Electrical room

Fish Statue