Day to day repair maintenance of submersible pump of borewell, raw water pump, water supply pipe fittings for drinking water supply at Inder, Hawamahal/Madibaba, New Tekadi Colony of AIKDOCM under Kamptee Sub Area.

Amount

Lowering and lifting of submercible pump at sitable depth wih chain pulley and tripod stand,labour including all necessary arrangement etc. all complete.As per instruction of Engineer in charge.

Repairing of motor and pump of 5/7.5 HP submercible pump which include winding bushing,thrust plate,impeller bush etc. complete. As per instruction of Engineer in Charge.pump rewinding with coated copper wire

Repairing of motor and pump of 5/7.5 HP submercible pump which include winding bushing,thrust plate,impeller bush etc. complete. As per instruction of Engineer in Charge.Motor GM Bushes

Repairing of motor and pump of 5/7.5 HP submercible pump which include winding bushing,thrust plate,impeller bush etc. complete. As per instruction of Engineer in Charge.Rotar shaft sleves

Repairing of motor and pump of 5/7.5 HP submercible pump which include winding bushing,thrust plate,impeller bush etc. complete. As per instruction of Engineer in Charge.Motor thoust Balk

Repairing of motor and pump of 5/7.5 HP submercible pump which include winding bushing,thrust plate,impeller bush etc. complete. As per instruction of Engineer in Charge.Water seal

Repairing of motor and pump of 5/7.5 HP submercible pump which include winding bushing,thrust plate,impeller bush etc. complete. As per instruction of Engineer in Charge.Pump ampler

Repairing of motor and pump of 5/7.5 HP submercible pump which include winding bushing,thrust plate,impeller bush etc. complete. As per instruction of Engineer in Charge.Pump top and bottom bushes

Repairing of motor and pump of 5/7.5 HP submercible pump which include winding bushing,thrust plate,impeller bush etc. complete. As per instruction of Engineer in Charge.Pump ampler nick ring

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pip e etc. complete : 50 to 80 mm nominal bore

Supplying and erecting automatic control panel for 3 Ph, 415 volt, A.C. submersible/ centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP, S.P.P. combined ammeter/ volmeter, phase, indicating lamp enclosed in CRCA powder coated vibration proof enclosure with IP 54 protection, control panel should offer single phasing, phase, reversal, phase imbalance etc.

Supplying & erecting D.O.L starter 415V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply for 7.5 H.P.

Supplying and erecting flat flexible 3 core 6 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying and erecting submersible pumpset of 5.625 KW/7.5 HP with 415V, 50 c/s AC supply suitable for 150mm dia. Borewell suitable for 60 to 175 LPM discharge at 146 to 85m head & (max. efficieny at 119m head & 25 lpm) discharge & delivery pipe of Size-65mm diameter with a necessary H type damps as per specification no. WP-SMP

Supplying of Nylon rope 15mm dia and fixing it as per the instruction of engineer in charge

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes

Providing and fixing brass bib cock of approved quality 15 mm nominal bore

Providing and fixing brass stop cock of approved quality 15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) Lift 0 to 1.5 M

Desilting the Supply Well, Intake Well / Head Works, sump of water supply/ sewerage works etc. in wet or dry condition including lifts upto 9.0 M and lead upto 150 M as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge.

Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.

Providing and supplying in standard lengths Polyethelene Pipes,confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint /compression fitting joint or flanged joint excluding coupler/ specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GOI & GOM in all respect etc. complete.As per 63mm

Providing and supplying in standard lengths Polyethelene Pipes,confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint /compression fitting joint or flanged joint excluding coupler/ specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GOI & GOM in all respect etc. complete.As per 75mm

Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/ butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 63mm

Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/ butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 75mm

Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete.coupler 63

Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete.coupler 75

Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete equal Tee 63.

Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete.equal Tee 75

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)80 mm nominal bore

Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Up to 150 mm diameter

Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Above 150 mm diameter

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately)100 mm diameter

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 litre capacity - White

Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 :Up to 300 mm dia

Supply of C. I. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes ( as per - IS - 1536 /2001) and D. I. Pipes ( as per IS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.I. Follower Glands and M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by GOI and GOM in all respect, etc. complete as directed. 80mm dia

Supply of C. I. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes ( as per - IS - 1536 /2001) and D. I. Pipes ( as per IS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.I. Follower Glands and M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by GOI and GOM in all respect, etc. complete as directed.100mm dia

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Total impact of GST for the purpose of CTC