CA NO CE BTZ SOG TOKEN of 25 OF 2021-22 PROVN OF THREE OVERHEAD RESERVOIR CAPACITY ONE LAKH GALLON EACH AT SURATGARH MIL STN

Amount

Sch 'A' Sec - I, (Building / Structure Work)

Lump sum price worked out by the tenderer for “Building Work / Structure Work” as listed in Schedule ‘A’ Section - I.

Sch 'A' Sec - II (EXTERNAL WATER SUPPLY WORKS)

200mm dia cast iron sluice valve, ISI marked PN 1.6 conforming to IS-14846-2000 both end flanged, drilled, steel spindle and iron wheel handle, CI gate with brass ring complete including jointing material such as nuts, bolts, washers and rubber sheet etc complete all as specified and directed.

Supply, fixing, commissioning and testing digital water level indicator with five stage magnetic level sensing probe unit made of stainless steel (SS-304) of minimum 16mm dia probe stem customised to depth of the tank and sensors epoxy sealed in the probe stem actuated by float the move on the probe stem with the level of water in tank and reading shown in LED digital panel (digital panel size 100mm, 4 digit), level indicator should be complete with alarm on low and high level (both visual and audio ) by pass facility for audio alarm including all fittings and fixing arrangement, connection from probe unit to panel and panel to DB with copper conductor cable of suitable size as per manufacturerer instructions drawn through & including 20mm dia PVC rigid conduit (heavy duty, ISI marked) fixed along RCC pillar/wall surfaces including all fitting arrangement i.e. PVC clamp, rawl plug, screw, terminal etc. complete all as specified and as directed . Make Active controls / RAWACO /Century 21st / Unison / Alphatech.

Construction of brick masonary valve pit chamber size 150 X150 X150 cm (internal dimension) using sub class 'B' bricks complete including excavation & earth work, PCC 1:5:10 type E-2 using 40 mm graded stone aggregate in foundation, coping on top in PCC 1:2:4 type B-2 using 20 mm graded stone aggregate, inner plaster 10 mm thick in cm 1:4 MS sheet cover 3.15mm thick mounted on angle iron frame of size 50 x 50 x 5mm with locking arrangement duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Cutting of existing CI pipes 200mm bore in trenches for fixing /insertion of new tee/pipe line/fittings etc complete all as specified and as directed. NOTE:- Earth work and new tee/pipe/fittings etc as required shall be measured and paid for separately.

Supplying and laying Ductile Iron pipe 200mm (8”) bore, spigot and socket joint, Class “K-9”, complete all as specified and as directed. Note : (a) Earth work and DI specials/ fittings shall be measured and paid separetly. (b) Cost of joints (Tyton joints ISI marked) including jointing materials shall deemed included in unit rate quoted by contractor.

Ductile iron specials/ fittings of any type, Bends, tapers, increasing, decreasing sockets, tees (Single and double branch), tail pieces and collars etc complete all as specified and as directed. Note:- Make of DI fittings shall be same make as that of DI pipe or of make recommended by manufacturer of pipe.

Subtotal

Sch 'A' Sec - III (Road, Path and Culvert Work)

Lump sum price worked out by the tenderer for “Road, Path and Culvert Work " as listed in Schedule ‘A’ Section - III.

Sch 'A' Sec - IV (Security wall, Fencing and Steel gate work)

Lump sum price worked out by the tenderer for “Security wall, Fencing and Steel gate work " as listed in Schedule ‘A’ Section - IV).

Sch 'A' Sec - V (AREA DRAINAGE WORK)

Lump sum price worked out by the tenderer for “Area drainage work " as listed in Schedule ‘A’ Section - V).

SCHEDULE 'A' SECTION - VI, (PART-I) (LIGHTENING PROTECTION AND AVIATION/ OBSTRUCTION LIGHT WORKS)

Lump sum price worked out by the tenderer for “Lightening protection and aviation/ obstruction light WORKS” as listed in Schedule ‘A’ Section -VI (Part-I)

SCHEDULE 'A' SECTION - VI, (PART-II) LIGHTENING PROTECTION AND AVIATION/ OBSTRUCTION LIGHT WORKS)

Earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI strip 32X6mm by means of GI bolts/nuts/washers, protected by 40 mm bore GI light grade pipe upto test point with 02 Nos nut and bolts. Earth plate shall be surrounded by alternate packed layer of charcoal or coke and common salt 15 cm thick all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, pit cover in 1:2:4 type B1using 20mm graded crushed stone aggregate and reinfircement (TMT) with 8mm dia @ 100mm c/c bothways & frame, PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in earthing pit including necessary excavation & earth work, complete all as specified & shown in electrical plate No. 3 of MES schedule Part-I. Note:- (i) The unit rate includes earthing lead & protection pipe upto 7.5 metre from top of earth plate. (ii) PCC chamber shall be construced at least 1.50 m away from the earth electrode and pipe for watering shall be provided in slanting manner. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.

Earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI wire 4mm dia by means of GI bolts/nuts/washers, protected by 15 mm bore GI light grade pipe upto test point with 02 Nos nut and bolts. Earth plate shall be surrounded by alternate packed layer of charcoal or coke and common salt 15 cm thick all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, pit cover in 1:2:4 type B1using 20mm graded crushed stone aggregate and reinfircement (TMT) with 8mm dia @ 100mm c/c bothways & frame, PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in earthing pit including necessary excavation & earth work, complete all as specified & shown in electrical plate No. 3 of MES schedule Part-I. Note:- (i) The unit rate includes earthing lead & protection pipe upto 7.5 metre from top of earth plate. (ii) PCC chamber shall be construced at least 1.50 m away from the earth electrode and pipe for watering shall be provided in slanting manner. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.

Epoxy insulator fixed on OHRs wall for along with aluminium strip all as specified and directed.

Aviation obstruction light fitting, twin type, IP65 comprising of aluminium alloy housing with polycarbonate enclosure and accessories complete with LEDs to be fixed on the OHR with suitable fixing accessories as shown on drawing complete all as specified and as directed. Make :- Bajaj Cat part No BGAV302 LED or equivalent in Philips/Wipro/Crompton

Sub main wiring for connection to aviation light from DB to top of OHR /any other light fittings elsewhere with 2x1.5 Sqmm + 1x1.5 Sqmm single core FRLSH grade PVC insulated unsheathed, 1100V grade multistranded copper conductor drawn through & including 20mm dia PVC rigid conduit (heavy duty, ISI marked) fixed along RCC pillar/wall surfaces including all fitting arrangement i.e. PVC clamp, rawl plug, screw, terminal etc., complete all as specified and as directed. Note :-Two runs of copper conductor and one run of PVC conduit including accessories shall be measured and paid as one unit.

Subtotal

Sch 'A' Sec - VII, (External Electrification Works)

Sand cushioning, with tibba sand (for under ground cable) 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified and as directed. (Note:- Punned thickness shall be considered for payment purpose)

Burnt clay brick old size class 'B' for cable protection cover, laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete all as specified and as directed

LT cable XLPE, insulated screened, PVC bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with stranded aluminium conductor having cross sectional area 6 Sqmm 2 core conforming to IS-7098 (Part-I -1988) complete all as specified and directed. (Note:- Earthwork, sand cushioning and brick protection shall be measured and paid seperately under respective items of BOQ)

Factory made DB (made out of CRCA sheet) SPN, 04 Way 230/ 240V, double door, dust and vermin proof, protection class IP-54 with and including 01 No MCB, SPN, 10KA, 10 Amp and 01 No MCB, SP, 6 Amp, 'C' curve including fixing arrangement complete all as specified and asdirected.

Supply and fixing Analogue time switch (with battery backup), 1 P module 24 hours program, programmable every 15 min, backup of 100 hours current capacity 16A, with 1 changeover (1 CO), cat part No TA916422 in Indoasian or equivalent in L&T/C&S/HPL

Supply and fixing of energy efficient LED Street Light fittings of 35 W capacity including electric connection, complete fitting with all accessories and following specifications, fixing with and including GI bracket made out of suitable size of light grade 32 mm dia tubing upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts including painting to MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete all as directed :-

(a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max 10%. (f) CRI : Morethan 70 and CCT : 5700K (g) IP rating : IP66. (h) IK rating : Minimum IK07 (j) Pressure die cast aluminium alloy for housing and heat resistant clear toughened glass (k) Built in potted LED Driver of the make as of the luminaire. (l) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (m) Surge protection 10 kV (inbuilt + extended) (n) Lens :- High efficiency wide angle lens (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

Subtotal

Sch 'A' Sec - VIII, (EXCAVATION AND EARTHWORK)

Lump sum price worked out by the tenderer for “Excavation and Earth work" as listed in Schedule ‘A’ Section - VIII.

Sch 'A' Sec - IX (Part-I), (DISMANTLING/ DEMOLITION WORKS)

Lump sum price worked out by the tenderer for “Dismantling/ Demolition work" as listed in Schedule ‘A’ Section - IX, (Part-I).

SCHEDULE 'A' SECTION - IX, (PART-II) (DISMANTLING/ DEMOLITION WORKS)

Demolition of existing RCC OHR above and over ground level only of including all pipes and fittings any discription and in any position, (appx 2 lakh gallon capacity) carefully without blasting, including reinforcement cut as required to facilitate and including removing rubbish material (i.e concrete and all other unserviceable debries) from site and thrown in low lying empty area (as per direcction of GE/AGE) at any distance upto 8 KM from the site complete all as directed. Note :- All safety precaution shall be strictly followed by the contractor during demolition of tank. Any loss and damage to the nearby existing structure during the demolition of OHT shall be made good by the contractor at his own cost and site of work shall be left clean and tidy after demolition of OHT.

Taking up sluice valve of 200mm bore complete all as directed.

Subtotal

Dasmesh Buildcon

R K BUILDERS

BHULLARCONSTRUCTIONS

M/s R.L.PAREEK

SOM BUILDERS

SOOD ASSOCIATES PVT LTD

shekh construction company

GARGA ASSOCIATES

A.V BUILDERS