Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.6 LAccepted-AOC MASTER BUILDING DALHOUSIE ROAD DALHOUSIE ROAD PATHANKOT PATHANKOT GURDASPUR PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Lowest bid. | |
| 2 | L2₹19.8 L+₹3.2 L (19.3%)Rejected-Finance BYE PASS DALHOUSIE ROAD PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L2 | Rejected-Finance Other than lowest bid. | |
| 3 | L3₹21.2 L+₹4.6 L (27.5%)Rejected-Finance D 55 HAKIKAT RAI RD ADARSH NAGAR DELHI 33 | L3 | Rejected-Finance Other than lowest bid. |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
20 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SOUTH MAMUN
GE SOUTH MAMUN 145001
REPAIR AND MAINT OF CERTAIN VT/CENTRIFUGAL/ SUBMERSIBLE PUMPING SETS WITH ALLIED MISC WORKS UNDER AGE E/M OF GE (SOUTH) MAMUN
2022_MES_547686_1
GE(S)/M-22/2022-23
Open Tender
Miscellaneous Works
Item Rate
270 days
GE SOUTH MAMUN
AS PER NIT
8 documents required · 8 mandatory
₹500
GE SOUTH MAMUN
₹50,000
Yes
22 Oct 2022
25 Aug 2022
27 Sept 2022
25 Aug 2022
20 Sept 2022
8 Sept 2022
Amount
M&L for disconnecting electrical/ mechanical connection and taking out VT pumping set having stages 9 to 18 from existing bore well approx depth varying from 30m to 75m with all accessories such as column pipe, top/line shaft, bushes, spiders and bowl assembly etc. transporting to authorized workshop and after repairing including replacement of following spare parts and re-lowering in same bore well with all accessories, including re-commissioning and testing to ensure efficient and smooth functioning to obtain required discharge complete all as specified and directed. Note:- Defective major components/spares if required to be replaced shall be measured as supply only under respective items here-in-after and labour element included in this item for replacement of major spares/components.
Supply only stainless steel top shaft 25 mm dia each length not less than 3m complete all as specified and directed.
Supply only stainless steel top shaft 30mm dia each length not less than 3m complete all as specified and directed.
Supply only 25 mm dia bright steel line shaft threaded on both ends in multiple length each not less than 3m long complete all as specified and directed.
Supply only 30 mm dia bright steel line shaft threaded on both ends in multiple length each not less than 3m long complete all as specified and directed.
Supply only 25 mm dia stainless steel line shaft coupling complete complete all as specified and directed.
Supply only 30mm dia stainless steel line shaft coupling complete all as specified and directed.
Supply only 25 mm dia stainless steel line shaft sleeve complete all as specified and directed.
Supply only 30 mm dia stainless steel line shaft sleeve complete all as specified and directed.
Supply only150mm bore, 150mm long heavy duty MS socket fully threaded complete all as specified and directed.
Supply only gun metal bearing retainer of existing size complete all as specified and directed.
Supply only 25/30mm dia bearing retainer rubber bush for size 150mm dia pipe complete all as specified and directed.
Supply only gun metal split type gland including 02 Nos studs suitable for 25 to 38mm dia shafts including provision of gland packing complete all as specified and directed.
Supply only gun metal stuffing box bush suitable for 25 to 38mm dia shafts complete all as specified and directed.
Cutting worn out portion of stainless steel top/line shaft of 25 to 38mm dia including threading on plain surface to match with existing threading of coupling etc complete all as specified and directed.
Cutting and removing worn out threaded portion of 100/150mm bore MS column pipe, threaded to required length to match with existing connecting system etc complete all as specified and directed.
Supply only 150mm bore 7mm thick MS column pipe ( each length not less than 3m.) threaded both ends with one full threaded MS socket fully threaded complete all as specified and directed.
M & L for overhauling and repair of multistage VT pump assembly of 9 to 18 stage and discharge capacity with replacement of defective parts such as gun metal bush, rubber bush, CI neck ring, pump shaft, bowl case & impeller etc including necessary lathe work, metalling, turning, polishing, and reassemble all the parts and refix at same position complete all as specified and directed. Note:- Defective major components/spares if required shall be measured as Supply only under respective items here-in-after and labour element included in this item for replacement .
Supply only gun metal impeller with lock suitable for 150mm dia bowl assembly complete all as specified and directed.
Supply only intermediate bowl case gun metal/bronze bush bearing as per existing sample complete all as specified and directed.
Supply only CI neck ring as per existing sample of suction, discharge and intermediate bowl assembly complete all as specified and directed.
Supply only gun metal/bronze suction and discharge bowl case bush as per existing sample complete all as specified and directed.
Supply only intermediate bowl case bush bearing rubber as per existing sample complete all as specified and directed.
Supply only bolt/stud as per existing sample for bowl assembly complete all as specified and directed.
Supply only stainless steel pump shaft as per existing sample suitable for bowl assembly 9 to 18 stages in multiple length each not exceeding 3m complete all as specified and directed.
Supply only intermediate/suction/discharge bowl case assembly as per existing size complete all as specified and directed.
M&L for disconnecting electrical/mechanical connection and taking up or down unserviceable VT /Centrifugal motor of any type, make and capacity from foundation and transporting to authorized workshop to carry out works such as replacement of motor bearing, cutting & removing existing burnt/short circuited winding wire complete, cleaning of core grooves and surfaces, rewinding the motor with superior quality enameled copper winding wire of suitable gauge, numbers of turns and coils including insulating material such as sleeves, lathorised fibe glass, cotton/PVC tape varnishing etc, reassembling, refixing and testing the motor at site on full load complete all as specified and directed. Note:- Defective major components/spares if required shall be measured as Supply only under respective items here-in-after and labour element included in this item for replacement .
M & L for rewinding of 3 phase electric motor of 25/30 HP with super enameled copper winding wire of same gauge including impregnated paper, sleevs, lathorised fibre glass, varnish and tape, etc complete all as specified and directed.
All as per srl item No 24 here-in-above, but electric motor of 40 HP complete all as specified and directed.
All as per srl item No 24 here-in-above but electric motor of 50/60 HP complete all as specified and directed.
All as per srl item No 24 here-in-above, but electric motor of 75/100 HP VT motor complete all as specified and directed.
Supply only bearing plate DE/NDE side as per existing sample complete all as specified and directed.
Supply only terminal plate as per existing sample complete all as specified and directed.
Supply only ratchet plate for VT motor as per existing sample complete all as specified and directed.
Supply only ratchet pulley for 3 phase VT motor as per existing sample complete all as specified and directed.
Supply only stainless steel bearing No 6316/ 7220 or as per existing sample for VT /CF motor complete all as specified and directed.
Supply only stainless steel ball bearing No 6311/6312/6211 or as per existing sample for VT & C/F motor complete all as specified and directed.
Supply only stainless steel ball bearing No 6204/6205 or as per existing sample complete all as specified and directed.
S&F in replacement water pressure gauge 0-200 PSI x 4" liquid filled with valve & connected pipe etc including taking down old onecomplete all as specified and directed.
M&L for disconnecting and taking up/down 15000/20000 GHP capacity centrifugal /mono-block pump set of any type from foundation and transporting to authorized workshop carry out repairs such as replacement of pump bearing and overhauling including replacement of minor unserviceable components/spares like 'O' rings, Oil seal, Mechanical seal, pump gland, casing ring, gasket packing and greasing, welding, metaling, turning, polishing, Lathe work etc. along with replacement of major components/spares as per manufactures instruction and testing after repairing and reconnecting at site including re-commissioning and testing to ensure efficient and smooth functioning to achieve desired discharge of pump set etc complete all as specified and directed. Note:- Defective major components/spares if required shall be measured as Supply only under respective items here-in-after and labour element included in this item for replacement .
Supply only high carbon steel pump shaft as per existing shaft sample complete all as specified and directed.
Supply only heavy duty shaft sleeve with bush as per existing sample complete all as specified and directed.
Supply only stainless steel ball bearing No 6306/ 6307 or as per existing sample for C/F pump complete all as specified and directed.
Supply only stainless steel ball bearing No 3307/ 7311 or as per existing sample for C/F pump complete all as specified and directed.
Supply only bearing housing DE/NDE as per existing sample for centrifugal pump set complete all as specified and directed.
Supply and replacement of old u/s shaft end bushes as per sample for centrifugal pump set complete all as specified and directed.
Supply only bearing housing sleeves as per existing sample for centrifugal pump complete all as specified and directed.
Supply only GM air release key as per sample for centrifugal pump complete all as specified and directed.
Supply only gland packing for centrifugal pump set complete all as specified and directed.
Supply only pump shaft gland packing bush for centrifugal pump complete all as specified and directed.
Supply only tyre/star rubber coupling as per sample for centrifugal pump set complete all as specified and directed.
Supply only oil seal as per sample for centrifugal pump complete all as specified and directed.
Supply only impeller with impeller key as per existing sample for centrifugal pump of capacity upto 20000GPH complete all as specified and directed.
Supply and replacement of old u/s Pump housing nut, bolt and washer as per sample for centrifugal pump set complete all as specified and directed.
M&L for disconnecting electrical/ mechanical connection and taking out submersible pump set of capacity 20 HP to 45 HP from existing bore well approx depth varying from 45 m to 85 m with all accessories and transporting to authorized workshop for rewinding and overhauling of sumbermersible pump and after overhauling / rewinding, re-lowering the pump set in bore well with all accessories, including testing to ensure efficient and smooth functioning to obtain required discharge, etc complete all as specified and directed. Note:- Defective major components/spares if required to be replaced shall be measured as Supply only under respective items here-in-after and labour element included in this item for replacement.
M&L for overhauling and repair of submersible pump assembly of 5 to 9 stage and discharge capacity with replacement of defective parts such as gun metal bush, rubber bush, CI neck ring, pump shaft, bowl case & impeller etc including necessary lath work, metaling, turning, poloshing, and reassemble all the parts and refix at same position complete all as specified and directed. Note:- Defective major components/spares if required shall be measured as Supply only under respective items here-in-after and labour element included in this item for replacement.
Supply only stainless steel shaft for submersible pump as per existing sample complete all as specified and directed.
Supply only gun metal impeller with key as per existing sample for submersible pump complete all as specified and directed.
Supply only s/s shaft for motor as per existing sample complete all as specified and directed.
Supply only gun metal bush for submersible pump as per existing sample complete all as specified and directed.
Supply only rubber bush as per existing sample for submersible pump complete all as specified and directed.
Supply only CI intermediate /suction/discharge case as per existing sample for submersible pump complete all as specified and directed.
Supply only CI neck ring as per existing sample for submersible pump complete all as specified and directed.
Supply only pump motor coupling as per existing sample for submersible pump complete all as specified and directed.
Supply only thrust plate as per existing sample for submersible pump complete all as specified and directed.
Supply only flange pipe nut, bolt and washer of size 5/8" fully threded 80 mm long as per existing sample for submersible pump complete all as specified and directed.
Rewinding of 3 Phase, 17.5/25 HP submersible electric motor with PVC insulated copper winding wire of same gauge including impregnated paper, sleevs, lathorised fibre glass, and tape, etc complete all as specified and directed.
All as per srl item No 67 here-in-above but 30/40 HP submersible electric motor complete all as specified and directed.
All as per srl item No 67 here-in-above but 45/ 50 HP submersible electric motor complete all as specified and directed.
S&F in replacement old u/s 16 Sqmm, 3 core, 1100 Volts, copper conductor flat cable for submersible pump including connecting to motor complete all as specified and directed.
S&F in replacement old u/s 10 Sqmm, 3 core, 1100 Volts, copper conductor flat cable for submersible pump including connecting to motor complete all as specified and directed.
S&F in replacement old u/s 125mm bore 7mm thick MS/ GI column pipe with both side flange ends, each length not less than 3m complete all as specified and directed.
Disconnecting existing over heated or burnt cable terminal at existing panel and cutting out over heated / burnt portion of cable, stretching / opening cable to suitable required length from available rings and reconnecting cable in position properly with providing new lugs, tapes etc for cable size upto 95 sqmm complete all as specified and directed.
M&L for carrying out repair to unserviceable motor starter of any type and replacement of defective minor spare parts such as connector, burnt control copper cable, insulator ,Terminal Block, copper thimbles, etc and any other minor spare parts required at site including testing to ensure efficient and smooth functioning of starter complete all as specified and directed. Note:- Defective major components/spares if required to be replaced shall be measured as supply and replacement under respective items here-in-after.
Supply and replacement of old u/s power contactor 3 pole 40/50 Amps with new one as per existing sample complete including connection & testing complete all as specified and directed.
Supply and replacement of old u/s power contactor 3 pole 70/80 Amps with new one as per existing sample complete including connection & testing complete all as specified and directed.
Supply and replacement of old u/s power contactor 3 pole 95/110 Amps with new one as per existing sample complete including connection & testing complete all as specified and directed.
Supply and replacement of old u/s Add-on aux. contact Block suitable to existing contactor alongwith connecting and testing complete all as specified and directed.
Supply and replacement of old u/s Ammeter 3 phase with suitable rating to existing CT complete including connection & testing
Supply and replacement of old u/s volt meter 3 phase 500 volts 50 Hz squire type suitable size to existing one complete including connection & testing as per existing sample complete all as specified and directed.
Supply and replacement of old u/s HRC fuse 63/100 Amps suitable size to existing one complete including connection & testing complete all as specified and directed.
Supply and replacement of old u/s LT CTs of suitable rating & size to existing one complete including connection & testing complete all as specified and directed.
Supply and replacement of old u/s timer of any type with new timer suitable to existing sample for fully automatic motor starter complete all as specified and directed.
Supply and replacement of old u/s single phase preventer of any type with new single phase preventer suitable to existing sample for fully automatic motor starter complete all as specified and directed.
Supply and replacement of old u/s over load relay of range 45 to 120 Amps or as per existing sample complete all as specified and directed.
M&L for replacement of old u/s ON/OFF, Start/ Stop push button suitable size, colour and rating to existing one complete including connection & testing complete all as specified and directed.
M&L for replacement of old u/s indication lamps with LED type indication lamps with showing red, yellow and green colours suitable for 240 Volts AC supply as per existing size complete including connection & testing complete all as specified and directed.
M&L for making serviceable old UNSV Single phase preventer wall mounting 415 volts, 3 phase of any type carrying out repair and replacement of unserviceable minor spare parts such as connector, burn controle cable, insulator ,Terminal Block, copper lugs, etc for making the MPC serviceable and testing at site complete all as specified and directed.
Repair to oil immersed star delta starter by replacing fixed, moving contact, relay, No volt coil etc required for making starter serviceable of any capacity complete all as specified and directed.
Supply and top up/replacement of electric motor starter oil complete all as specified and directed.
S&F in replacement 3 pole MCCB 63 Amp adjustable type Thermal Release Range with breaking capacity- 25 KA (as per existing sample frame size) complete all as specified and directed.
S&F in replacement 3 pole MCCB 100 Amp adjustable type Thermal Release Range with breaking capacity- 25 KA (as per existing sample capacity & frame size) complete all as specified and directed.
S&F in replacement 4 pole MCCB 160 Amp adjustable type Thermal Release Range with breaking capacity- 25/36 KA (as per existing sample frame size) complete all as specified and directed.
S&F in replacement 4 pole MCCB 200-250 Amp adjustable type Thermal Release Range with breaking capacity- 36 KA (as per existing sample frame size) complete all as specified and directed.
Supplying, fixing in replacement for on load changeover switch 4 pole, 415 volts, 100 Amps in Open execution type complete all as specified and directed.
Supplying, fixing in replacement for on load changeover switch 4 pole, 415 volts, 160/200 Amps in Open execution type complete all as specified and directed.
S&F in replacement of motor protection circuit breaker (MPCB), 415 Volts, 3-ph, 50 Hz, 63 Amp rating having short circuit & over load protection rotary type including taking down old of any capacity complete all as specified and directed.
M&L for replacement of old unserviceable star delta starter with Fully Automatic Star - Delta Starter in sheet metal enclosure type AC-3 phase, 415V, 50 Hz suitable for 50 HP electric motor complete all as specified and directed.
All as per srl item No 100 here-in-above but suitable for 40 HP electric motor complete all as specified and directed.
M&L for preparation of old painted surfaces for repainting complete body of motor with superior quality super enameled paint, colour as per standard Engineering practice for centrifugal & VT motor with base frame etc by spraying and including writing SM No/MES No complete all as specified and directed.
M&L for preparation of old painted surfaces after repairing the broken parts as required and repainting complete feeder pillar boxes/panels/ boards with applying two coats of synthetic enameled paint (as existing color) with using spray machine on prepared surfaces complete all as specified and directed.
S&F in replacement of LT panel door lock chromium plated or as per existing sample complete all as specified and directed.
M&L for Replacement of old unserviceable multistage submersible pump suitable for 30 HP motor for head 120 Mtrs and discharge cap 7700 GPH complete all as specified and directed.
M&L for replacement of existing old u/s soft motor starter of any type with new Digital Soft motor starter (suitable for 60 HP motor) fixing in existing panel complete with testing at site complete all as specified and directed.
M&L for replacement of old unserviceable star delta starter with Fully Automatic Star - Delta Starter in sheet metal enclosure type AC-3 phase, 415V, 50 Hz suitable for 25/30 HP electric motor complete all as specified and directed.
M&L for Replacement of old unserviceable multistage submersible Motor of cap 30 HP suitable for discharge cap 7700 GPH @120 Mtr head complete all as specified and directed.
M&L for taking out old unserviceable existing LT 1100 volts cable of any size from LT Panel /duct/ ground and Supplying, Laying & connecting cable 1.1 KV grade, of size 70 Sqmm 3.5 core aluminum conductor, screened, XLPE insulated, armored shielded and PVC sheathed complete all as specified and directed.
M&L for taking out old unserviceable existing LT 1100 volts cable of any size from LT Panel /duct/ ground and Supplying, Laying & connecting cable 1.1 KV grade, of size 50 Sqmm 3.5 core aluminum conductor, screened, XLPE insulated, armored shielded and PVC sheathed complete all as specified and directed.
Taking out old unsv oil immersed starter of Centrifugal/VT pump supply and fixing starter 415 V 50 HZ fully automatic star-delta starter with relay range 30-120A range suitable for Centrifugal /VT pump capacity upto 50 HP complete including connecting with panel (make:- dvepl/aspl/Max/tricolite) and testing complete all as specified and directed.
M&L for PCC foundation for pump set/ motor of suitable size and if required any other place using PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) including use and waste of formwork including dismantling existing foundation and removal of rubbish out off the premises etc complete all as specified and directed.
Replacement of old unsv rubber mat with the new rubber mat shock proof suitable for LT panel of size 2mx1mx19 mm thick ,ISI marked complete all as specified and directed.
Development of borewell by means of pumping by Air Compressor of minium pressure 10 Kg/sqcm (compressor to be arranged by contractor at his own cost) untill sand free water of required yield is obtained complete all as specified and directed.
M/S GULATI ENGINEERING WORKS
GARG CONSTRUCTION CO
Bidder Name
GARG CONSTRUCTION CO
INDIA ELECTRIC WORKS
M/S GULATI ENGINEERING WORKS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .