Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance B 814 8TH FLOOR B G TOWER OPP DELHI GATE SHAHIBAUG ROAD AHMEDABAD 380004 | AHMADABAD | GUJARAT | 380004 | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹38.9 L
EMD Value
₹77,869
Closing Date
15 Feb 2024, 2:00 pmClosed
AGM EM
FCI RO Lucknow
Improvement of Boundary lighting with LED street light at FSD Chandpur under DO Bulandshahr
2024_FCI_794714_5
EM/03/2023-24
Open Tender
Electrical Works
Item Rate
60 days
FSD Chandpur, Bulandshahr
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹77,869
21 Mar 2024
9 Feb 2024
16 Feb 2024
9 Feb 2024
15 Feb 2024
9 Feb 2024
Amount
Supply of PVC insulated PVC sheathed cable of 1.1KV grade armoured Underground aluminum conductor cable as reqd confirming to IS –7098 part I with up to date amendments) of the following size
4x10 sqmm
4x16 sqmm
4x25 sqmm
3.5x35 sqmm
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size on wall surface as required..
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm_MS flat clamp)
Providing, Laying and fixing following dia G.I Pipe (Medium Class) in ground Completed with G.I fitting including trenching (75 cm deep) and re-filling etc as required 50 mm dia
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 40 mm dia (OD-40 mm & ID-35 mm nominal)
Supplying and fixing of light class G.I. pipe of 50 mm dia.(nominal) 3metres length along the pole for protection of underground cable as required.(conforming to IS-1239 part 1 (2004) or equivalent with upto date amendment)
Laying of one number PVC insulated and PVC sheathed / XLPEpower cable of 1.1KV grade of following size in the existing RCC/ HUME/ METAL/HDPE pipe as required.
Above 35 sq. mm and upto 95 sq. mm
Above 95 sq. mm and upto 185 sq. mm
Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 kv grade as required.
4x10 sqmm(25mm)
4x16 sqmm(28mm)
4x25 sqmm(28mm)
3.5x35 sqmm(32mm)
Supply, installation, testing and commisioning of weather proof MS loop in loop out busbar box havin 4P MCCB 63Amp and of size not less than 450x350x200 mm with 4 Nos. suitable capacity ALU (upto 150 Amp) Bus Bar (R,Y,B & N) duly finished and painting, detachable gland plate & Arrangement for interconnection etc as required.(Confoming to relevent BIS/IS standard or equivalent)
Supply , Installation, Testing & Commissioning of LED Street Light fitting with mandatory driver set having die cast aluminium body and lenses suitable for 90 watt having Luminous 110 Lm/watt to 125Lm/Watt or Luminous should not be less than 10000 and having SPD with internal surge protection upto 4KV and External surge protection upto 10KV,Line voltage protection upto 8Hrs ,autorestart having minimum 2 years warranty (Confoming to IP 65/IP66 protection and IS -16103-2012) as per direction of engineer-in- charge
Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.
Supply , Installation, Testing & Commissioning of integral well glass luminaire compressed of dia cast canopy gear box housing and glass driver surge with heat resistance glass of LED well glass fitting 35 to 40 watt, minimum 110 Lm/watt to 125 Lm/watt or Luminous should not be less than 4200, SPD with internal surge protection upto 4KV and External surge protection upto 10KV,Line voltage protection upto 8Hrs with autorestart having minimum 2 years warranty conforming to IS-16103-2012 or equivalent with upto date amendments as per direction of engineer in charge .
Supply , Installation, Testing & Commissioning of 120 Watt ,110 Lumen/Watt LED flood light luminaire with mandatory driver set having die cast aluminium body comprises of elegantly designed highly efficient lenses ,heat Resistant and toughened glass cover with IP-66 Protection fitting.
Supply and Fixing of 9 mtrs single section Hot dip Galvanized(as per BS EN ISO 1461) octagonal Street light pole (specification not less than, top dia 70 mm, Bottom dia 155 mm & base plate 260mm*260mm, 16 mm thickness IS-2062, 4 Nos. of "y'" type 24mm dia.,750mm length, with projected length of 125mm, Foundation bolts) having 3 mm thickness, of grade S355 and a vandal resistance, water proof door opening of approximate 500mm length at an elevation of 500mm from base plate for cable connection and including of GI bracket (of minimum 1000 mm length each from pole) supporting to min 02 street lights, on RCC foundation grade- M20 with base of depth 1700 mm including 200 from Free Ground level and width of 600 mm including the cost of foundation bolts, excavation and back filling complete in all respects as required as per relevant BIS/IS standards.
Supplying and drawing of Flexible PVC round insulated copper cable of following size 3 X 1.5 sqmm
Supplying and fixing Four Pole sheet steel enclosure on surface/ recess along with 32 A 415 V "C" curve Four Pole MCB complete with connections, testing and commissioning etc. as required.
Earthing with G.I Earth pipe 4.5 metre long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering of pipe. Etc. with charcoal/ coke and salt as required.
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. (conforming to relevant BIS/IS codes)
Providing and Laying earth connection from earth electrode with 6 SWG dia G.I Wire in 15mm dia G.I pipe from earth electrode including connection with G.I thimble excavation and refilling as required.
Supply & Installation of suitable size 3mm phenolic laminated sheet having 1 nos. terminal having 5 point for 3 phase, 1 netrual & 1 earth on and 1 no. SP MCB 5/6A , interconnection etc are required
Credit for dismantelled/damaged items:-
Aluminium Scrap ( i.e., Cables etc)(L.S.)
Iron Scrap (Steel tubular poles, dismantled iron conduits etc.)(L.S.)
SONU TRADERS
chauhan and associates
zakhmi brothers
GENERAL ENGINEERS
Jaydeep Agency Corporation
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .