DOOR TO DOOR MAINTENANCE OF MD ACCN FOR AGE E/M COMPLAINTS AT AFS UNDER GE(AF) SAMBRA

Amount

Taking down switch boards / fitting / fixture , identify and rectify the complaints pertains to internal electrification of any type and nature of MD Accns such as rectification of faulty electric circuit , tightening of loose wiring / conduits replacement of defective accessories such as switch, socket, ceiling rose , holders etc., complete all as specified and directed. Note:- (a) Switch, socket, ceiling rose , holders etc. shall be measured and paid separately as supply only. (b) Cost of minor items such as screws, clamps, washers, bakelite laminated sheet top cover, insulation tapes, nut , bolts etc. shall be deemed including in the quoted rate. (c) If the contractor fail to rectify the defects mentioned in the complaint slip on within 48 hrs,. he will be charged Rs. 100/- per complaints/ per day and same will be recovered from his RAR . Each job shall contain 10 complaints). (d) The contractor / his rep will collect the complaint from complaint cell ( Concerned JE E/M) every day at 9.00 AM and rectify the complaints 48 hrs and deposit the complaint slip ( duly signed by the users ) to concerned JE E/M.

Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and directed.

M&L for point wiring for light/fan/bell/exhaust fan point with and including single core FRLSH PVC insulated and unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade drawn through and including suitable size of PVC cassing capping with accessories with laminated top cover fixed on MS sunken box for housing of switch, socket, regulator etc complete with and including 1.5 sqmm FRLSH PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dolly and making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as specified and directed

All as per Srl item No 3 here-in-before but socket point 5 Amps on independent board -ditto-

All as per Srl item No 3 here-in-before but socket point 5 Amps on the same board with other switches -ditto-

All as per Srl item No 3 here-in-before but cable of 4 Sq mm for 15 Amp switch socket outlet on independent board including provision of 4 Sqmm PVC insulatred unshethed multistranded copper conductor as earth wire -ditto-

All as per Srl item No 3 here-in-before but for one light point control by two way switch -ditto-

M&L for point wiring for the following with and including single core FRLSH PVC insulated and unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade drawn through and including suitable size of PVC concealed conduit with accessories with laminated top cover fixed on MS sunken box for housing of switch, socket, regulator etc complete with and including 1.5 sqmm FRLSH PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dolly and making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as specified and directed :-

One light/fan/exhaust fan/bell/point controlled by one switch.

One pin 5 amps socket point on the same board with other switches

One 3 pin 5 amps socket on independent board.

All as per Srl item No 8 above but with 4.0 sqmm copper wire for 3 pin socket outlet 15 Amp on independent board -ditto-

M&L for point wiring for the following with and including single core FRLSH PVC insulated and unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade drawn through in existing conduit with accessories with laminated top cover fixed on MS sunken box for housing of switch, socket, regulator etc complete with and including 1.5 sqmm FRLSH PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dolly and making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as specified and directed:-

One light/fan/exhaust fan/bell/point controlled by one switch.

One pin 5 amps socket point on the same board with other switches complete

One 3 pin 5 amps socket on independent board.

All as per Srl item No.10 above but with 4.0 sqmm copper wire for 3 pin socket outlet 15 Amp on independent board -ditto-

S&F LED T5 Tube light rod ingress protection IP20 18W complete all as specified and directed

S&F T5 tube light 1*18w/20w 4 Ft complete all as specified and directed

S&F LED tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make : Philips Cat Part No.BN021 LED 20S PSU CW GR S2/ Crompton Greaves Cat Part No.LDDR20-CDL Dazzle Ray / Bajaj Cat Part No.BCLAB 20W or other equivalent make as specified in list of makes of Particular Specifications as approved by Accepting Officer

S&F LED mirror light fitting , type with high out put diffuser 2 feet, 5watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as speified and drected. Make:-HAVELLS CAT PART NO-ENDURALINEARNEOBS10WLED865SPCWH/WIPRO CAT PART NO-LL20-111-XXX-65NE3/BCLSB 10 WH or other equivalent make as specified in list of makes of Particular Specifications as approved by Accepting Officer

S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement lamp holder PVC/Poly carbonate body with back plate complete all as specified and directed

S&F in replacement Switch piano Single pole 5 Amps, two way, complete all as specified and as directed by Engineer-in-Charge Make - Havells. Cona, SSK, wipro, Legrand

S&F in replacement switch piano flush type, Single pole 5 Amps one way complete all as specified and directed

S&F in replacement of switch piano flush type, Single pole 15 Amps, one way complete all as specified and directed

S&F in replacement of socket outlet flush type, 3/5 pin, 5/15 Amps complete all as specified and directed

S&F in repalcement of Switch Socket combination flush type 15Amps complete all as specified and directed

S&F in replacement of socket outlet flush type, 3 pin, 5 Amps complete all as specified and directed

S&F in repalcement of switch socket combination flush type 5 Amps complete all as specified and directed

S&F in replacement of ceiling fan regulator electronic type, 230 Volt, 150 Watt with 5 step of control including making holes in laminated bakelite sheet cover and connection complete all as specified and directed

S&F in replacement of ceiling rose PVC/poly carbonate insulated body three terminal ISI marked complete all as specified and directed

S&F in replacment PLS Lamp two pin 9/10/11W complete all as specified and directed

S&F in replacment PLS Lamp two pin 18W complete all as specified and directed

S&F in replacement Recessed mounting LED 2x2 luminaire type complete all as specified and directed. Make:- Cat Part No. BCTBLR 36W ZTN NW of Bajaj or other equivalent make as specified in list of makes of Particular Specifications

S&F in replacement MCB single pole, 240 volts of rating 6-32 Amps of C curve breaking capacity of 10 KA complete all as specified and directed

S&F in replacement MCB suitable for 6 to 32 Amps, 240 Volt AC supply C Curve single pole and neutral(SPN) with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and directed

S&F MCB 63 Amps, 440 Volt AC supply Triple Pole with Neutral (TPN) C curve with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and directed

S&F sheet metal enclosure MCCB DB, double door, vertical TPN 4 way with 200 Amps rated busbar complete all as specified and directed

S&F MCCB 63 amps, 4 pole, 415 volts, fixed type breaking capacity 16KA complete all as specified and directed

S&F MCCB 100amps, C curve TPN, 415 volts,25KA,4 Pole complete all as specified and directed

S&F MCCB 125amps, C curve TPN, 415 volts, 16KA, 4 Pole complete all as specified and directed

S&F blank cover for MCB DBs complete all as specified and directed

S&F in replacement bell Ding dong AC single pole 230volts complete all as specified and directed

S&F in replacement bell push button Piano flush type single pole 5 Amps complete all as specified and directed

S&F in replacement sub main wiring in PVC concealed conduit min 25 mm dia with 2 single core 10 sqmm multi-stranded PVC insulated cable unsheathed 1100 volts grade with one earth wire of 10 sqmm copper conductor cable connected to common earth and earth dolly complete and including PVC concealed conduit complete all as specified and directed. Note:-Two run of 10 sqmm and one run of 10 sqmm shall be measured as 1 RM.

All as per Srl item No 40 above but of size 6 sqmm and earth wire of 6 sqmm

All as per Srl item No 40 above but of size 4 sqmm and earth wire of 4 sqmm

S&F in replacement submain wiring using 4 runs of single core FRLSH PVC insulated, unsheathed stranded copper conductor cable of size 4 runs of 10 Sqmm of voltage rating 1100V for three phase & neutral, drawn in and including concealed PVC conduit of dia not less than 32 mm dia with standard acessories, along with two run of FRLSH PVC insulated, unsheathed, stranded copper conductor of size 2x 6.0 Sqmm as earth continuity conductor all as specified and directed Note:-4 runs of single core FRLSH PVC cable 10sqmm for three phase & neutral with two run of earth conductor as earth and conduit shall be measured as one unit

S&F in replacement submain wiring using 4 runs of single core FRLSH PVC insulated, unsheathed stranded copper conductor cable of size 4 runs of 6 Sqmm of voltage rating 1100V for three phase & neutral, drawn in and including concealed PVC conduit of dia not less than 32 mm dia with standard acessories, along with two run of FRLSH PVC insulated, unsheathed, stranded copper conductor of size 2x 4.0 Sqmm as earth continuity conductor all as specified and directed Note-4 runs of single core FRLSH PVC cable 6sqmm for three phase & neutral with Two run of earth conductor as earth and conduit shall be measured as one unit

S&F in replacement sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,SPN 8 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall, complete all as specified and directed Note : Cost of cutting/chasing of wall and making good disturbed surface shall deemed to be included in the quoted rate

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,SPN 12 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall, complete all as specified and directed Note : Cost of cutting/chasing of wall and making good disturbed surface deemed shall deemed to be included in the quoted rate

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,SPN 4 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall, complete all as specified and directed Note : Cost of cutting/chasing of wall and making good disturbed surface shall deemed to be included in the quoted rate

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,TPN 4 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall complete all as specified and directed Note : Cost of cutting/chasing of wall and making good disturbed surface shall deemed to be included in the quoted rate

S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and directed Make:-Cat Part No 607841of Legrand or other equivalent make as specified in list of makes of Particlar Specifications as approved by Accepting Officer

S & F in replacement LED Bulb 0.5W (in different colors) complete all as specified and directed

S&F in replacement bed side fitting with suitable LED bulb complete all as specified and directed

S&F in replacement Decorative wall light fixture made up of Polycarbonate, suitable for retrofit 9/11 W LED lamp complete all as specified and directed

Dismantling and taking out faulty wiring including casing and capings/conduits etc and refixing the same after rectification of fault in original position including replacment of copper/aluminum cable any size not more than 10 mtr, casing/capping/conduit not more than 5 mtr and testing after completion complete all as specified and directed

S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and directed

S&F switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and directed

S&F Switch Socket combination 3 Pin 6 Amps modular type, 2/3 pin combined 3/4 module 230 Volts complete all as specified and directed

S&F Switch Socket combination 3 Pin 6/16 Amps modular type, 2/3 pin combined 4 module 230 Volts complete all as specified and directed

S&F fan step regulator modular type,120W -1/2 module (As par existing size ) electronic socket type five step controlled 230V AC 50 Hz complete all as specified and directed

S&F in repairs modular white cover plate with frame but 1 module complete all as specified and as directed.

S&F in repairs modular white cover plate with frame but 2 module complete all as specified and as directed.

S&F in repairs modular white cover plate with frame but 3 module complete all as specified and as directed.

S&F in repairs modular white cover plate with frame but 4 module complete all as specified and as directed.

S&F in repairs modular white cover plate with frame but 6 module complete all as specified and as directed.

S&F in repairs modular white cover plate with frame but 8 module complete all as specified and as directed.

S&F in repairs modular metel flush box but 1,2,3 module to suit as per existing make complete all as specified and as directed

S&F in repairs modular metel flush box but 4 module to suit as per existing make complete all as specified and as directed

S&F in repairs modular metel flush box but 5/6 module to suit as per existing make complete all as specified and as directed

S&F in repairs modular metel flush box but 7/,8 module to suit as per existing make complete all as specified and as directed

S&F in repairs GI flush sunken box but any size to suit as per existing make complete all as specified and as directed

S&F in repairs 3mm thick bakelite laminated sheet top cover with copper screw any size to suit as per existing make complete all as specified and as directed

S&F in replacement of single core 1.5 sqmm size cable (nominal area) PVC FRLSH multistanded copper conductor cable 1100 volts ISI marked draw through existing point wiring complete all as specified and as directed .

S&F in replacement of single core 2.5 sqmm size cable (nominal area) PVC FRLSH multistanded copper conductor cable 1100 volts ISI marked draw through existing point wiring complete all as specified and as directed .

S&F in replacement of single core 4 sqmm size cable (nominal area) PVC FRLSH multistanded copper conductor cable 1100 volts ISI marked draw through existing point wiring complete all as specified and as directed .

S&F in replacement of single core 6 sqmm size cable (nominal area) PVC FRLSH multistanded copper conductor cable 1100 volts ISI marked draw through existing point wiring complete all as specified and as directed .

S&F condenser 2.5 MFD confirming to IS complete all as specefied and as directed

S&F flexible wire of size 23/0.0076 stranded copper conductor complete all as specefied and as directed

S & F in replacement of condenser 04 MFD confirming to IS complete all as specefied and as directed

S&F in repairs repairs flexible, 3 core PVC insulated copper conductor cable of size 40/0.0076 with over all PVC insulation ISI marked complete all as specified and directed

S&F in repairs repairs plug top, 3 pin 15 Amps, including making necessary connections complete all as specified and directed

Repair to Biulding security light Taking down carefully the defective Security (street) light fittings any kind any type from the building/walls and refixing the same on Buildings/walls after repair complete all as directed by Engineer in Charge. Note: (a) Team of workers to be provided by the contractor for emergency inside the camp for 24 Hours (b) T&P i.e, ladder and vehicle shall be provided by the contractor. (c) The contractor/his rep will collect the complaint from JE every day 9.00 hrs , the same will be rectified before sunset on same day,

S&F in replacement outdoor driver unit 25 watt with surge protection complete all as specified and directed

S&F in replacement outdoor driver unit 45 watt with surge protection complete all as specified and directed

S&F in replacement surge protection devices 5 KV compatible with industrial and outdoor LED fixtures upto rated power of 45 Watt complete all as specified and directed

S&F Street light bracket in replacement, made of GI pipe 40mm bore, light grade not less than 1.2 m long bent to shape including fixing with 2 nos suitable size of MS flat iron clamps, nuts, bolts and washers complete all as specified and directed

S&F LED based street light, housing made up of LM6 pressure die cast aluminium alloy with effective thermal management, sturdiness. The fixture should have a minimum system efficiency of more than 100 lumen/watt and a minimum system lumen output of not less than 2500 lumens and maximum system wattage 25 Watts. The fixture shall have a correlated colour temperature of al least 5700K and CRI f minimum 70. The fixture shall be designed for a system life of 50,000 hours @ 70% lumen maintenance ingress protection of IP66 (lamp and gear compartment and mechanical inpact resistance raiting of IK>=08. The fixture driver should have an operating voltage range of 140-270 V & potted type for humming free operation, driver should be withstand up to 440v for 8hrs, two surge proection not less than 5KV one on driver and one external surge protection, PF>0.95 and THD<10% and have double phase protection. LED light fitting should be suitable for ambient temperature from (-) 10C to (+) 50 C. The fixture should comply with the parameters IEC 60598 and LED should comply to IEC 61000-3-2 ed. 3.2 per harmonics IEC 61347-2-3,2006 in configuration with IEC 61347-1 ed 2.0,2007 for electrical safety LM 79 and for LED LM 80 test report needs to be submitted from the house NABL accreditation laboratory.

S&F LED based street light, housing made up of LM6 pressure die cast aluminium alloy with effective thermal management, sturdiness. The fixture should have a minimum system efficiency of more than 100 lumen/watt and a minimum system lumen output of not less than 2500 lumens and maximum system wattage 30 Watts. The fixture shall have a correlated colour temperature of al least 5700K and CRI f minimum 70. The fixture shall be designed for a system life of 50,000 hours @ 70% lumen maintenance ingress protection of IP66 (lamp and gear compartment and mechanical inpact resistance raiting of IK>=08. The fixture driver should have an operating voltage range of 140-270 V & potted type for humming free operation, driver should be withstand up to 440v for 8hrs, two surge proection not less than 5KV one on driver and one external surge protection, PF>0.95 and THD<10% and have double phase protection. LED light fitting should be suitable for ambient temperature from (-) 10C to (+) 50 C. The fixture should comply with the parameters IEC 60598 and LED should comply to IEC 61000-3-2 ed. 3.2 per harmonics IEC 61347-2-3,2006 in configuration with IEC 61347-1 ed 2.0,2007 for electrical safety LM 79 and for LED LM 80 test report needs to be submitted from the house NABL accreditation laboratory.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level connecting to the galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanized iron and steel earth wire protected by provision of GI mediumgrade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to lighting protection earth test points all as specifed and directed including testing on completion.

DHAIRYASIL RAMAKANT DESAI (BID ID -3374652)

M/s PRATAP VIJAYSINGHRAO DESAI (BID ID -3372401)

M/s.GOODWILL ELECTRICALS (BID ID -3382013)