Repair/replacement of internal wiring, fitting and fixture in FCBRNP, BD Coy, CTW and various installations and repair/ replacement of earthing with maint free chemical earthing, glow sign BD, lightening protections and other connected work in MD

Amount

Taking down carefully copper/aluminium point wiring (light, fan, bell, socket or power) complete, including fixture and fittings such as switches, ceiling rose, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. credit for above items should be made as per conditions separately.

M&L for point wiring with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators, etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall to match with the existing finish etc for the following :-

One light point controlled by one switch

One fan/exhaust fan point controlled by one switch and regulator

Socket outlet, three pin 5 Amps on the same board

Socket outlet, three pin, 5 Amp, independent

All as per item No.2 above, but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 Amps socket outlet flush type on independent board.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :-

One light point controlled by one switch

One fan/exhaust fan point controlled by one switch and regulator

Socket outlet, three pin 5 Amps on the same board

Socket outlet, three pin, 5 Amp, independent

All as per item No.4 above, but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 Amps socket outlet flush type on independent board.

S & F switch piano, flush type, single pole one way 5 Amps complete all as specified and directed.

S & F switch piano, flush type, single pole one way 15 Amps complete all as specified and directed.

S & F bell push flush type single pole one way 5 Amps complete all as specified and directed.

S & F socket outlet 2 in 1, 5 pin, 5 Amps flush type complete all as specified and directed.

S & F socket outlet 5 in 1, 5 pin, 15 Amps flush type complete all as specified and directed.

S & F switch socket combination 5 in 1, 5 and 15 Amp flush type complete all as specified and directed.

S & F ceiling rose, 3 terminal PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal incl PVC square block complete all as specified and directed.

S & F lamp holder, PVC/polycarbonate type with back plate suitable for batten fitting incl PVC square block complete all as specified and directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.

S & F in replacement Call bell ding dong AC, 230 Volts, single pole complete all as specified and directed.

S&F switch modular, one way 6 Amps, 1 module with suitable plate and cover complete all as specified and directed.

S&F switch modular one way 16 Amps, 1 module with suitable plate and cover complete as per existing make and model complete all as specified and directed.

S&F socket modular 6A, 2/3 pin combined 2 module with suitable plate and covercomplete as per exisisting make and model complete all as specified and directed.

S&F socket modular 6A/16A, 2/3 pin combined 2 module with suitable plate and cover complete as per existing make and model complete all as specified and directed.

S&F modular fan regulator step type 120W, 2 module with suitable plate and cover complete as per existing make and model complete all as specified and directed.

S&F modular bell push 6 Amps 1 module with suitable plate and cover complete as per existing make and model complete all as specified and directed.

S&F White cover plate with frame 1 module complete as per existing make and model all as specified and directed.

S&F White cover plate with frame 2 module complete as per existing make and model all as specified and directed.

S&F White cover plate with frame 3 module complete as per existing make and model all as specified and directed.

S&F White cover plate with frame 4 module complete as per existing make and model all as specified and directed.

S&F White cover plate with frame 6 module complete as per existing make and model all as specified and directed.

S&F White cover plate with frame 8 module complete as per existing make and model all as specified and directed.

S&F Decorative ultra slim with polycarbonate housing with high lumen output environmental friendly, energy efficient ready to use pack surface and wall mounted LED batten (LED tube light fitting complete 20W) with integrated electronic driver and 02 No PVC square blocks incl taking down old UNSV fitting. Make : Havells cat No. LUMILINEBS20WLED865SPCWH or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F Decorative ultra slim with polycarbonate housing with high lumen output environmental friendly, energy efficient ready to use pack surface and wall mounted LED batten (LED tube light fitting complete 10W) with integrated electronic driver and 02 No PVC square blocks incl taking down old UNSV fitting. Make : Havells cat No. LUMILINEBS10WLED865SPCWH or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F new generation energy saving LED Bulk Head fitting 10 Watt made up of Poly carbonate housing with diffuser incl taking down old UNSV fitting. Make : Havells Cat Part No. RUGBYGENXFTS10WLED865SSYMBOPCH or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F LED building security light fitting 25 Watt , energy saving and environmental friendly long life LED fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection including suitable size bracket incl taking down old UNSV one. Make : Havells cat No. ENDURASUNDOWNSL25WLED765PASYBOPCIHD or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F decorative wall light fitting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base incl LED lamp (cool/warm white) 9 watt incl taking down old UNSV one. Make:- Havells cat part No LHFOAJE1TZ1I060 or eqlnt in Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F in replacement LED panel 2 feet x 2 feet size 36 wattt glare free symmetrical including driver and taking down old UNSV one complete all as specified and directed. Make : Havells cat part No VENUSNEOHE2X2R36WLED830PIRSENSOR or eqlnt in Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F in replacement LED Tubelight (Single Side Connection) LED Rod 20 watt Ultra bright LED polycarbonate Tubelight with very high efficacy suited for installation in existing T4/T8 fitting with G13 lamp holders. Make : Havells cat part No.PHOTONUTRAE2.01213TBSSTL20WLED865SPC or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F in replacement elegantly designed sleek recessed mounted pressure die ciast aluminium luminaire 18 watt in powder coated white finish in round profile with optimised heat sink for efficient heat dissipation and independent electronic driver complete all as specified and directed. Make : Havells cat part No DEGEPRONEORDDLR18WLED840S or eqlnt in Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F in replacement elegantly designed sleek recessed mounted pressure die cast aluminium luminaire 10 watt in powder coated white finish in round profile with optimised heat sink for efficient heat dissipation and independent electronic driver complete all as specified and directed. Make : Havells cat part No. DEGEPRONEORDDLR1oWLED840S or eqlnt in Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F in replacement IP65 new generation, post-top 35 watt, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Make: Havells cat part No RUBYPT35WLED757PSYMTOPC or eqlnt in Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

Supply and fixing Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light 30 watt with high power LEDs as light source, suitable for highlighting architectural features or Area Lighting. Also suitable to rough services/installations. (Note - The contractor is responsible to arrange suitable height of ladder for replacement of fitting) Make : Havells cat part No. JETAQUANTOPLUSFLP30WLED757SYMLENS or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

Supply and fix track light compact size with high power COB LED,15 Watt complete all as specified and directed. Make : Havells cat part No UNECOTRACKLIGHTS15WLED830S38WHT or eqlnt in Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

Supply and fix Lexo (PRISMATIC) Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base. Make : Havells cat part No. LHFOGAELTIIFOIS or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

M&L for sub main wiring with two run of 10 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLSH cable in and including 1100 volt electrical grade PVC Conduit of desired colour not less than1.2 mm thick and 25 mm wide & 10 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one.

All as per item No 41 above, but size 6 Sqmm Four runs and with one run 6.0 sqmm FRLSH copper wire for earth continuity.

All as per item No 41 above, but size 6 Sqmm two runs and with one run 6.0 sqmm FRLSH copper wire for earth continuity.

All as per item No 41 above, but size 4 Sqmm Four runs and with one run 4.0 sqmm FRLSH copper wire for earth continuity.

All as per item No 41 above, but size 4 Sqmm two runs and with one run 4.0 sqmm FRLSH copper wire for earth continuity.

Supply and fixing PVC cable ducts 75 x 45 mm with all accessories for fixing of sub main wiring drawn through cable duct along wall complete all as specified and directed.

S&F enclosure, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volt incl taking down old UNSV one.

S&F triple pole and neutral enclosure with a three pin and earth plug and socket complete with one TPN MCB 32 amps, 240 volt incl taking down old UNSV one.

S&F MCB distribution board Double door SPN 240 volts 12 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc incl taking down old unserviceable one.

M & L MCB distribution board double door 415 volt, TPN 4-way, incl taking down old unserviceable

S&F MCB distribution board Double door SPN 240 volts 8 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc incl taking down old unserviceable one.

S&F MCB distribution board double door 240 volts 4 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls incl taking down old unserviceable one.

S&F in replacement load line vertical TPN distribution board 4 way including 1 incommer MCCB of 125 Amps 4 pole double door IP-43 protection, powder coated, IK08 with provision of suitable size bus bar and cable management kit complete all as specified and directed.

S & F in replacement MCB SP 6 to 32 Amps, 230 V AC incl taking down old unserviceable one complete all as specified and directed.

S & F in replacement MCB SPN 40 Amps, 230 V, AC incl taking down old unserviceable one complete all as specificed and directed.

S & F in replacement MCB SPN 63 Amps, 230 V, AC incl taking down old unserviceable one complete all as specified and directed.

S & F in replacement MCB TPN 63 Amps, 415 V, AC incl taking down old unserviceable one complete all as specified and directed.

S & F in replacement MCB TPN 100 Amps, 415 V, AC incl taking down old unserviceable one complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium multistranded conductor of size 10 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular including taking down unserviceable cable all as specified and directed.

All as per item No 59 above, but 6 Sqmm size complete all as specified and directed.

All as per item No.59 above, but 6 Sqmm size complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode 60x60cmx6mm thick burried directly in ground in earth pit not less than 2.25 mtr depth below normal ground level with top edge of the plate vertically to depth of not less than 1.5 mtr below ground level connected to & including GI lead 4 mm dia as earthing lead connecting to equipment by means of GI bolts & nuts etc with provision of charcoal and salt etc all as per electrical plate No-3 of SSR part-I 2009 including RCC cover and MS angle iron frame, watering with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork in any strata and testing on completion etc. including taking down old unserviceable earthing complete all as specified and directed by Engineer-in-charge.

M&L in replacement of PVC rectangular boards closed recessed of size 100 x 100 x 50mm complete all as specified and directed.

M&L in replacement of PVC rectangular boards closed recessed of size 175 x 100 x 50mm complete all as specified and directed.

M&L in replacement of PVC rectangular boards closed recessed of size 200 x 150 x 50mm complete all as specified and directed.

M&L in replacement of PVC rectangular boards closed recessed of size 250 x 200 x 50mm complete all as specified and directed.

M&L in replacement of Hylam White 3 mm Electrical Switch Board Sheet, Finishing Type

M&L in replacement of LED lamp 9 watt complete all as specified and directed.

S&F in replacement surface panel round Slim 18 watt 6500 K complete all as specified and directed. Make : Havells cat part No EDGESURFACERDDLR18WLED865S or eqlnt in Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

Supply and fix in replacement recess mounted LED moveable projector zoom spot light 30 watt using state of the art COB LED chips with accurate ferelectors to provide maximum and optimum light output complete all as specified and directed. Make : Shakti cat part No. SZRDCMZ030 or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker. Note : Contractor is responsible to arrange ladder for suitable size for fixing of lights in the ceiling and cost for the same includded in the quoted rate of item.

S&F in replacement inbuilt sensor based smart LED auto dimmable batten 10 watt two feet long, made from powder coated extruded aluminium housing opaque glare free diffuser, pre wiring with all accessories complete all as specified and directed. Make : Shakti cat part No. SZSLAMX010-iss or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

M&L for taking out old unsv earthing and material and labour for maintenance free grounding Solution set earthing comprising of Earthing rod , outer pipe in GI and having minimum diameter of 76mm, 3m in length and inner pipe to have minimum diameter of 32mm, both end properly welded to make them airtight. GI terminal size of 100x50x6mm with 2 Nos M8 holes for termination area in between two pipes filled with dry type chemical powder having high conductivity and make sure no air pockets are left. Electrode must be tested for short circuit test of minimum 40 KA at CPRI/NABL. The earthing electrode will be placed in the ground after a bore is drilled to the depth of 3.5 Mtr. The bore drilling will be done with the help of Pneumatic boring machine, 50 Kgs BFC will be placed in the bore to cover the earthing rod from all sides. BFC will be poured in Slurry form in properly mixed condition. The Earth pit cover Square 300x300x240 mm to be provided to cover the earth Pit and shall be made of reinforced FRP and should be capable of carrying the weight of 5 Tons. Make : U-PROTEC or equivalent in Ashlok earthings/JEF technology NOTE :- (a) Rates of boring 3 Mtr for earth electrode, GI strip 20x3 mm & 40 mm dia protection pipe upto 7.5 Mtr from earth electrode is deemed to be included in the quoted rate. (b) On testing, after, after completion, if the earth resistance <3 ohms is not obtained, earthing will be rejuvenated at no extra cost till the desired earth resistance is obtained. (c) Test certificate from the OEM has to be produced by the contractorfor the material used in earthing

M&L for taking out old unsv earthing and material and labour for maintenance free grounding Solution set earthing comprising of 17.2 mm Pure copper earthing rod, 3m long, Copper terminal size of 100x50x6mm with 2 Nos M8 holes for termination. Electrode must be tested for short circuit test of minimum 40 KA at CPRI/NABL. The earthing electrode will be placed in the ground after a bore is drilled to the depth of 3.5 Mtr. The bore drilling will be done with the help of Pneumatic boring machine, 50 Kgs BFC will be placed in the bore to cover the earthing rod from all sides. BFC will be poured in Slurry form in properly mixed condition. The Earth pit cover Square 300x300x240 mm to be provided to cover the earth Pit and shall be made of reinforced FRP and should be capable of carrying the weight of 5 Tons. Make : "U-PROTEC" or equivalent in Ashlok earthings/JEF technology NOTE :- (a) Rates of boring 3 Mtr for earth electrode, copper strip 20x3 mm & 40 mm dia protection pipe upto 7.5 Mtr from earth electrode is deemed to be included in the quoted rate. (b) On testing, after, after completion, if the earth resistance <3 ohms is not obtained, earthing will be rejuvenated at no extra cost till the desired earth resistance is obtained. (c) Test certificate from the OEM has to be produced by the contractorfor the material used in earthing

Supply and fix in replacement Air termination, single pointed aluminium rod 12mm dia and 300mm long end threaded all as specified and as directed.

Supplying and fixing in replacement aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complee all as specified and directed.

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex head screw complete all as specified and directed.

Supply and fix in replacement post insulator epoxy LV type suitable for aluminium/GI/copper strip 25 x 4 mm lightening conductor fixed on wall/roof/pole including screw and taking out existing insulator complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and making good surface for laying /removing of cable all as specified and directed by Engr in charge as in

Soft/loose soil

Hard/dense soil

Returning filling in excavated soil in trenches, watering and well ramming in layers not exc. 25 cm complete all as specified.

Removal of surplus excavated spoil to distance not exc. 50 metre all as specified and directed

Supply & Laying in replacement of Telerex DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 50 mm and inner dia 38 mm polythylene with smooth internal and profiled external surface for non pressure under ground cable incl couplers & bends complete all as specified.

M & L for bituminous road cutting to a width of 45 cm and depth 50 cm for laying of pipe for laying of UG cables and making good with PCC (1:3:6) type cI (using 20mm graded stone aggregate)

Supply , laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured , electric power cables ( heavy duty) with stranded aluminium conductor 1100 volts grade in trenches/ passing through pipe/fixing on walls, floors etc incl using suitable clamp of cross sectional area 2 core 10 Sqmm in and including taking out old one all as specified and directed.

Supply and erect in replacement steel tubular poles swaged welded poles complete with MS base plate MS pole cap bolts nuts and screws as per IS 2713 (part II) 1980 made out MS tubing duly painted with metal primer and 2 coated of aluminium paint over exposed surface and one coated of red oxide and 2 coat of bituminous paint for embedded portion as specified type 410 SP - 55 of 11 mtrs long all as specified. Note : Excavation earth work & PCC shall be measured and paid separately under relevant items

Supply & Fix in replacement PVC insulted sheathed wire with copper conductor flexible 3 core 2.5 Sq mm for connecting street light fitting from over head line /pole boxes complete all as specified and directed.

Supply and fixing in repairs Pole Flood Light Fitting Braket round shape suitable for four flood light fitting made of Angle iron bar (50x50x6mm) of suitable size complete specified & directed by Engn-In-Charge.

Spply and fixing in replacement including taking down LED flood lights fitting 200 watts, 5700K with die cast housing and toughened glass cover Specially designed for LED Floodlight luminaire,heat resistant tempered glass for protection including copper wire with connection and switch,etc at the nearest point .

M&L in replacement fabrication of Kiosk box made out of fibre material complete with SPN ,aluminium bus and suitable for one number MCB (SP) including one No MCB (SP) 6 Amps 240 volts with glands for incoming & out going cable including fixing of flat iron clamps of size on PCC/Steel tubular pole complete all as specified and as directed by Engr-in-Charge.

S&F in repair glow sign board box type printed on poly carbonated sheet of size 200 x 100 x 25 cm having provision of 3 x LED tube light inside the box and 10 mtrs 3 core 1.5 sqmm circular PVC connecting wire with hanging arrangment as directed by engr -in charge. Note :- Background, font size & colour and material to be printed on board shall be as per direction of Engr-in-Charge.

Supplying and laying GI tubing light grade 50 mm dia incl all accessories for encasing cables for mechanical protection , laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall/floor or along poles with complete accessories such as bends/sockets/reducers/saddles incl necessary threading/drilling works including taking down old tubing . all as specified and directed.

S&F in replacement MCCB 4 pole, 400 Amps, 415 V, 50 kA thermal magnetic release adjustable type complete all as specified and directed. Make : Indoasian/L&T/Legrand/Havells

S&F in replacement MCCB 4 pole, 250 Amps, 415 V, 36 kA thermal magnetic release adjustable type complete all as specified and directed.

S&F in replacement MCCB 4 pole, 160 Amps, 415 V, 25 kA thermal magnetic release adjustable type complete all as specified and directed.

Material and labour for fixing aluminium terminals (thimbles) in 1100 volt LT XLPE cable upto size 50 sqmm incl dismantling old thimbles of any type.

Taking out old unserviceable LT panel and supply, installation, testing & commissioning, dust, weather & vermin proof L.T feeder pillar box (approx size 1.2m x 0.5m x 1.0m) factory fabricated (penal shall be got manufactured from any manufacturer duly approved by CPRI) outdoor cubicle/KIOSK type totally enclosed outer cage fabricated with 3.15mm thick MS sheet with frame made of MS angle iron 50x50x5 mm suitable for operation on 3 phase 4 wire, 440V 50 Hz system, with hinged panel doors on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos. of circular cable entry holes at bottom only with suitable PVC/ rubber/ wooden bushes to prevent ingress of water/ vermin etc, inside the enclosure. All the holes shall be fixed with chromium plated brass cable glands for cable entry/exit with & including necessary internal wiring with stranded PVC insulated FRLS copper conductor cables of adequate size. The kiosk/ box shall be powder coated internally /externally of approved colour. Quoted unit rate shall be deemed inclusive of PCC foundation, angle iron legs of 50cm above ground level made of angle iron 50x50x5mm & the following accessories:-

Copper bus bar rectangular 400 Amps full for phase and half for neutral and interconnection of MCCBs to Bus bar mounted on epoxy insulators with colour coding PVC sleeves.-01Job

MCCB 250 Amps, 4 pole 415 Volts, 50 Hz ,50 KA, thermal magnetic release adjustable type- 01 No ( Incoming)

MCCB 160 Amps, 4 pole, 415 Volts, 50 Hz ,25 KA, thermal magnetic release adjustable type - 03 No ( Outgoing)

MCCB 125 Amps, 4 pole, 415 Volts, 50 Hz ,25 KA, thermal magnetic release adjustable type - 01 No ( Outgoing)

RYB LED phase Indicator Lamp set - 01 No

Provision of cubicle as per above description to accommodate the above mentioned accessories.

Internal wiring of panel board, metering equipment with suitable size PVC insulated, unsheathed, 1100 V grade cable with multistranded copper conductor, including provision of lugs/thimbles on either ends of cable.

Taking out old unserviceable LT panel and supply, installation, testing & commissioning, dust, weather & vermin proof L.T feeder pillar box (approx size 1.5m x 0.5m x 1.0m) factory fabricated (penal shall be got manufactured from any manufacturer duly approved by CPRI) outdoor cubicle/KIOSK type totally enclosed outer cage fabricated with 3.15mm thick MS sheet with frame made of MS angle iron 50x50x5 mm suitable for operation on 3 phase 4 wire, 440V 50 Hz system, with hinged panel doors on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/ rubber/ wooden bushes to prevent ingress of water/ vermin etc, inside the enclosure. All the holes shall be fixed with chromium plated brass cable glands for cable entry/exit with & including necessary internal wiring with stranded PVC insulated FRLS copper conductor cables of adequate size. The kiosk/ box shall be powder coated internally /externally of approved colour. Quoted unit rate shall be deemed inclusive of PCC foundation, angle iron legs of 50cm above ground level made of angle iron 50x50x5mm & the following accessories:-

Copper bus bar rectangular 800 Amps full for phase and half for neutral and interconnection of MCCBs to Bus bar mounted on epoxy insulators with colour coding PVC sleeves.-01Job

MCCB 400 Amps, 4 pole 415 Volts, 50 Hz ,50 KA, thermal magnetic release adjustable type- 01 No ( Incoming)

MCCB 250 Amps, 4 pole 415 Volts, 50 Hz ,50 KA, thermal magnetic release adjustable type- 01 No ( Outgoing)

MCCB 200 Amps, 4 pole, 415 Volts, 50 Hz ,25 KA, thermal magnetic release adjustable type - 01 No ( Outgoing)

MCCB 160 Amps, 4 pole, 415 Volts, 50 Hz ,25 KA, thermal magnetic release adjustable type - 02 Nos ( Outgoing)

MCCB 100 Amps, 4 pole, 415 Volts, 50 Hz ,25 KA, thermal magnetic release adjustable type - 01 Nos ( Outgoing)

3 pole Power contactor 415 Volts, ML - 4, 70 Amps cap - 01

Digital street light timer type - 1 No

MCB SPN 40 Amps :- 03

RYB LED phase Indicator Lamp set - 01 No

Provision of cubicle as per above description to accommodate the above mentioned accessories.

Internal wiring of panel board, metering equipment with suitable size PVC insulated, unsheathed, 1100 V grade cable with multistranded copper conductor, including provision of lugs/thimbles on either ends of cable.

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate for foundation of poles complete all as specified and directed.

M & L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate for mass filling of poles etc complete all as specified & directed.

M&L for cement concrete as in coping including necessary form work type B1 (1:2:4) using 20mm graded stone aggregate all as directed by Engr-in-Charge

Excavation in trenches n exc 1.5m wide but exc 1.5m deep upto 3 mtr and making good surface for foundation of pole all as specified and directed.

Techmat trading solution

M/S kirpan Enterprises

ONKAR ELECTRIC AND GENERAL STORE

Priyanka Power line

RELIABLE ENTERPRISES