REPAIR TO DAMAGED MS GRILL, RCC PARAPAT RAILINGS, STAIRCASE FLOORING, ELECTRIC/WATER SUPPLY DUCT JOINERY, CRUMPLE SHEET AND CONNECTED WORK AT OLD RS COLABA UNDER AGE B/R-II NAVY NAGAR

Amount

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified.

Material & Labour machine cut Kota stone slab flooring as in treads of steps, 20-25mm thick thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and mirror polishing, over & incl 20mm thick screed bed in CM 1:6 complete all as specified.

Material & Labour machine cut Kota stone as in vertical surface skirting ,riser of step,dado and pillars etc including taking down cement plaster on walls and racking out joints,hacking for key, scrubing down with water etc and 10 mm thick rendering on brick or concrete suface in CM 1:4 complete all as specified and directed

Taking down shutters of any description not exc 2 sqm each complete all as specified and directed

Supply & Fixing 40 mm thick factory made Flush shutters , solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed

Supply & Fixing 150 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed

Supply & Fixing 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed

Supply & Fixing 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

Supply & Fixing 100mm size stainless steel medium weight butt hinges all as specified and directed.

Material & Labour Plain aluminium sheeting 0.56 mm thick fixed as in crumple section complete all as specified and directed

Dismantling of MS grill of any description and position etc complete all as specified and directed

Material & Labour for fabrication of framed work as MS grills. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work conform to Fe 290 Gde-E-165 & fixed in position as directed etc complete all as specified and directed

Material & Labour for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Complete removal of existing treatment, preparing surfaces, plastered or unplastered old surfaces priming plastered and other surfaces with alkali-resistant priming paint and applying two coats of distemper oil bound, white or tinted on walls incl a coat of white cement putty complete all as specified and directed

Taking down cement plaster of any description on brick walls or concrete surfaecs etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed .

Material & Labour for 20 mm thick plastering in two coats 15 mm thick backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4 mixed with water proofing compound @ 2% by weight of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cement all as specified including scaffolding, Safety net etc all complete as directed by Engr-in-Charge. (Note :- work to be carried out upto G+14th floor & WPC shall be measured and paid separately)

Supply only integral water proofing compound of approved make as per ISI.

Material & Labour for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified.

Material & Labour preparation of new decorated surfaces of wall including washing and applying one coat of wall care putty all over the surface and two coats of distemper oil emulsion, white or tinted on walls complete all as specified and directed

Material & Labour three coat white washing on new plastered surface on ceiling including prepration of surface all as specified and directed

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. Note: Work will be executed by authorised applicator of approved manufacturer.

Chipping ,removing carefully concrete work by low impact hammer ,breaker without damaging the structure & cleaning and disposal of debris out side the premises etc. (columns, Beams, chajjas, slabs & RCC OHT) complete as directed

Material & Labour for providing and applying jacketing around columns, beams, slabs, chajjas etc with Mocro concrete (molith -MC) including all lifts, shuttering, drilling holes and fixing shear anchor as directed and specified complete. Note : Reinforcement shall be measured and paid separately (Rates including jacketing, formwork and micro concrete)

Material & Labour for clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTMB-117 on the existing reinforcements for 6 hrs and form a corrosion resistant, insoluble and adherent protective layer, including cleaning the reinforcement, wire brushing to remove loose rust spalls, wash the rebars with clean water within 1 hrs and wipe it dry complete all as specified and directed

Material & Labour for carry out application of ‘Bi-polar migratory corrosion inhibitor' EPCO-KP-100/protectsil CIT/ferogard 903 or techno-commercial equivalent on concrete surface .(This inhibitor shall have migratory kind of property which permits the material to migrate to a virtual extent of 100 mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It should have property to attack anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete complete as directed by Engr-in-Charge.

Replacement of steel reinforcement with CRS TMT bars of appropriate size where 20% of cross section is reduced cut to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, in various structural elements like columns, beams and foundations including drilling, bending, including dismantling of rusted steel including application of rust converter FEOVERT and applying protective coating IPNET-RB complete all as specified and directed.

Material & Labour for providing and applying structural grade EPIBOND-21-LP or techno-commercial equivalent on concrete surface, prior to application of any type of mortar plaster conforming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete all complete as directed by Engr-in-Charge.

Material & Labour for building up the profile of structrual members by using latex B2 modified air cured mortar system (polymer modified mortar) (1:5:15=1 monobond-5 Cement-15 Sand) -in damaged areas in 30mm thickness including leveling profiling etc complete all as specified and directed.

Material & Labour preparation of old decorated surfaces of wall including washing and applying two coat of Acrylic emulsion paint exterior grade (100% Acrylic) including necessary scaffolding, Safety net etc all complete as directed by Engr-in-Charge. (Note :- work to be carried out upto G+14th floor)

Material & Labour for Preparation of old painted surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by EIC.

Material & Labour preparation of old painted steel surfaces of over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material & Labour for writing letter or figures size as per existing numbering of the building (Block, Roman, Italic or Indian) all as specified and directed by Engr in Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.

Material & Labour for rendering 10mm thick in cement mortar 1:4 on backing coat of wall tiles etc complete all as specified and directed.

Material & Labour Coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply & Fixing for MS Plates chequred (Gde E-250, quality-A) for manhole cover fixed with brackets/handle etc completed all as specified and directed.

Demoliton of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed by Engineer-in-Charge

Material & Labour for PCC type C2, 1:3:6 using (40 mm graded agg) 75mm thick in sub floors, sub-base, floors and paving, plinth protection etc complete all as specified.

Material & Labour for screed bedding 20mm thick in CM 1:6 below chequred tiles finished even and smooth without using extra cement.

Material & Labour for prepolished coloured chequerd floor tiles of size 200x200x25 mm thick machine pressed set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails braces etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings and hanging, also fastening and fixing complete all as specified and directed.

Dismantling of stone slabs, bedded and pointed in any mortar of any description or thickness in floors, approns etc.

Material & Labour Granite (of any type) 20mm thick machine cut, over 15mm thick cement screed bed in CM 1:6 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding complete all as directed by Engr-in-Charge.

Material & Labour 20mm thick Granite (of any type) over 12mm thick backing coat in CM 1:4 machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as directed by Engr-in-Charge.

Material & Labour for sand cushioning under interlocking paver blocks watering and compact complete all as specified & directed .

Material & Labour for factory made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed

Removal of debries outside of MD land exc. 5 Km but n.exc. 10km. complete all as specified and directed.

(Note:- For item No 1 to 49 Work to be carried out at G+14 bldg including top roof,parapet and shaft walls with scaffolding & safety measures in repairs and in patches).

RAMESH ENTERPRISES

satguruenterprises

satyanarayan conastruction

SHREE JAGDISH FURNITURE CO.

ASHOK CONSTRUCTION

SHRI SAI ENTERPRISES

M/s. MAYUR ENTERPRISES