Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹30.4 LAccepted-AOC 79 O P ROAD NAYABASTI BARRACKPORE DIST NORTH 24 PARGANAS PIN 700 120 WB | BARRACKPORE | NORTH 24 PARGANAS | WEST BENGAL | 700120 | 1 | Accepted-AOC L1 Bidder | |
| 2 | 2₹32.6 L+₹1.0 L (3.24%)Rejected-Finance 79 O P ROAD NAYABASTI P O P S BARRACKPORE DIST NORTH 24 PARGANAS PIN 700 120 WB | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | 2 | Rejected-Finance Not L1 Bidder | |
| 3 | 3₹32.9 L+₹1.3 L (4.19%)Rejected-Finance | 3 | Rejected-Finance Not L1 Bidder | |
| 4 | 4₹33.3 L+₹1.7 L (5.47%)Rejected-Finance 11B NUTANGRAM ROAD SHYAMNAGAR DT 24 PARGANAS NORTH WEST BENGAL 743127 | NORTH 24 PARGANAS | NORTH 24 PARGANAS | WEST BENGAL | 743127 | 4 | Rejected-Finance Not L1 Bidder | |
| 5 | 5₹34.0 L+₹2.5 L (7.88%)Rejected-Finance | 5 | Rejected-Finance Not L1 Bidder |
Tender Value
₹29.5 L
EMD Value
₹59,000
Closing Date
27 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH KOLKATA
GE NORTH KOLKATA 46 BT ROAD KOLKATA 50
SPL REPAIR TO BLDG NO P 71 1 8 QTRS ORS MD ACCN AT CHORD LINE OF 507 ABW KANKINARA UNDER GE NORTH KOLKATA
2023_MES_573441_1
8209/22-23/E8/GE(N)/KOL/ OF 2022-23
Open Tender
Miscellaneous Works
Works
180 days
KANKINARA
AS PER NIT
8 documents required · 8 mandatory
₹500
GE NORTH KOLKATA
₹59,000
Yes
9 Feb 2023
6 Jan 2023
28 Jan 2023
7 Jan 2023
27 Jan 2023
20 Jan 2023
Amount
Demolition of cement concrete of any description and in any position provided as in roof padding, roof curb etc complete all as specified and directed. Note: - (a) Demolition should be done carefully to roof slab. (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department. (c) Disposal of debris/retrieved materials shall be thrown out of site at place as directed by the Engineer-in-Charge.
Material and labour for providing plain cement concrete 1:2:4 type B1 using 20mm graded aggregate as in roof padding over RCC roof, Laid in slope as per requirement, mixed with water proofing liquid admixture as per manufacturers instructions including necessary formwork complete all as specified and directed. Note:- (i) Minimum thickness of PCC shall be 50mm. (ii) Water proofing liquid admixiture shall be measured and paid seperately under appropriate item here-in-after.
Material and labour for water proofing treatment with APP based standard membrane over PCC padding in roof with the following courses of treatment for inaccessible roof :- (a) Applying bituminous primer (IS 3384) @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified and directed. (MAKE : TEXSA/BITUMAT/BITUNIL/SIKA) (b) Applying APP plastomeric bitumen based mineral finished water proofing membrane polyester reinforced (4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (Make of APP Membrane: Moply FP 4 mm mineral of TEXA/ WP Shield 103 PM of SIKA or Equivalent material of BITUNIL/BITUMAT.
Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal from site complete all as specified and directed.
Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal from site complete all as specified and directed.
Supply and fix 15 mm bore GI tube , medium grade with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified .
Supply and fix 20 mm bore GI tube , medium grade with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified an directed.
Refixing 15 mm bore serviceable old steel tubing and conncetions obtained from Item No. 4 above in new or old position with all fittings and fixed complete to walls/ceilings complete all as specified and directed.
Refixing 20 mm bore serviceable old steel tubing and conncetions obtained from Item No. 5 above in new or old position with all fittings and fixed complete to walls/ceilings complete all as specified and directed.
Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall complete all as specified and directed.
Supply and fix in repair 15 mm stop cock fancy type, chromium plated each with long shank and cup (concealed type) complete all as specified and as directed.
S&F in repair bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed down for iron pipe 15 mm bore complete all as specified and directed.
Supply and fix in repair 15 mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
Supply and fix in repair 20 mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
Supply & fix in repair vitreous china wash basin with padestal , white flat size 550x400mm incl bracket cutting for and pining in ends of brackets or erecting stand including PVC connection pipe 15 mm bore 450 mm long , waste coupling of PTMT complete all as specified and directed.
Supply and fix in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and directed
Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern including PVC connections 15mm size with brass nuts and washer both side of length 450mm complete all as specified and directed.
Supply and fix in repair pillar taps, 15 mm bore fancy type cast copper alloy, with caspstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe or for connection pipe complete all as specified and directed.
Supply and fix towel rail 600 mm long of PTMT fixed with and including chromium plated beass screws and wooden/ platic cleats ( Min weight 190 gms ) complete all as specified & directed.
Supply and fix in repair soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed.
Supply and fix in repair glass shelf assembly complete all as specified and directed.
Supply and fix swivel shower of PTMT any colour for fixing with 15 mm pipe ( Min weight 40 gms ) complete all as specified and directed.
Supply and fix Shower Arm 15 mm size , 195 mm long with bend of 45 degree with flange of PTMT any colour ( Min weight 40 Gms ) complete all as specified and directed.
Supply and fix 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls including taking up or down old unsv pipe with fittings complete all as specified and directed.
Supply and fix 110 mm bore PVC (SWR) bend , any radius complete all as specified and directed.
Supply and fix 110 mm bore UPVC (SWR) junction single ( single 'T') equal or unequal complete all as specified and directed.
Supply and fix 110 mm bore UPVC (SWR) Vent Cowl complete all as specified and directed.
Supply and fix in repair 50 mm bore High density polyethylene pipes (HDPE) of pressure rating 6 Kgf/ Sqcm fixed complete to wall , ceiling or laid in floor complete all as specified and directed.
Supply and fix in repair Grating doom 100 mm dia of PTMT ( Min weight 25 gms ) complete all as specified and directed .
Supply and fix Brass CP basin mixer 15 mm dia bore for mixing hot & cold water screwed down for iron pipe & fixed complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks (multi layer ) 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old unsv one complete all as specified and directed.
S&F 20 mm bore ball valves, high pressure, with polyethyelene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.
Supply and fix bathroom mirror cabinet PVC of size 300x450 mm fancy type complete all as specified and directed.
Suply and fix in repairs stainless steel sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and fix stainless steel kitchen plate rack for utensils of size 4"X30"X10" complete all as specified and directed.(Make:Model No KPR-311 of Blue Star or P-330 of Prayag)
Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) including dismantling of old unsv tiles complete all as specified and as directed.
Material and labour for glazed ceramic colour tiles (350x250) x7mm /(450x350x7 mm thick in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) including dismantling of old unsv tiles complete all as specified and as directed.
Material and labour for light shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc 0.18 sqm and nexc 0.38 of each tile in floor set and jointed in neat cement slurry & pointed in white cement and pigment to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:6) including dismantling of old unsv tiles complete all as specified and directed.
Taking down chowkhat with shutter n.exc. 1.50 Sqm each (without taking off shutter from the frames.) complete all as specified and directed .
Taking down chowkhat with shutter exc. 1.50 & n.exc. 4.00 Sqm each complete all as specified and directed .
Taking down shutters only of any description exe 1.0 sqm and n exe 2.0 Sqm each opening complete all as specified & directed.
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification & drawing complete all as specified & directed.
Supply & fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing complete all as specified & directed.
M&L for plain, solid, straight chowkats and frames of 2nd class hard wood, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
M&L for small articles such as clamp , hold fast , wall ties /wind ties, support of valley gutters , support or stays fo rain water , ventilating pipes , including bolts if required etc made of MS flat iron conforming to Fe-290 W ( Gde E-165 ) all as specified and directed .
Material and labour for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in block for fixing of hold fast , window cill and similar items including necessary formwork complete all as specified and directed .
Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and directed.
S&F small fitting such as window / doors stoppers brackets of any type, made out of 2nd class hard wood article n.exc 200 cum each complete all as specified and directed.
S&F Butt hinges of 50 mm size,medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
Supply and fix 75 mm size stainless steel butt hinges, medium weight fixed with cadmium plated screws complete all as specified and directed.
Supply and fix 100 mm size stainless steel butt hinges, medium weight fixed with cadmium plated screws complete all as specified and directed.
Supply and fix 125mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and directed.
Supply and fix 150 mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and directed.
Supply and fix 125mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
Supply and fix 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
Supply and fix 100 mm long hasp and staple safety type aluminium anodised fixed with screws complete all as specified and directed.
Supply and fix 300 mm long aluminium anodised, sliding door with hasp staple (both type) and fixing clips of sheet, cast or extruded section complete all as specified and directed.
Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and directed.
S&F steel window (box type) factory made with side hung shutters including projecting type hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified an directed.
S&F for steel windows with side hung shutters including projecting type hinges with steel handle and peg stay without glazing bars complete dovetailed or welded including one shop coat of red oxide primer complete all as specified an directed.
S&F for Anodised aluminium frame for doors, windows, ventilators with one or more rebated including joining cleat for fixing etc complete all as specified and directed.
S&F for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) etc complete all as specified and directed.
Supply and fix 4 mm thick figured glass, pin headed type and and glazing with oil putty in square not exceeding 0.5 Sqm in each pane for metal frame complete all as specified & directed.
S&F framed work such as grill, gratings, etc with ends of bars shouldered and/ or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.
Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane for metal frame complete all as specified and directed.
Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and average of width of apreature 1.40 mm fixed with stainless wire staples with steel wire staple with steel window/ wooden door complete all as specified & directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface exc 10 cm width or girth complete all as specified and directed .
Taking down cement plaster on brick or stone wals, etc. including raking out joints, hacking for keys, scrubbing down with water, etc. complete all as specified and directed .
M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finisheing the surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick on celling in cement mortar (1:3) including finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L for 20 mm thick rendering with CM 1:4 in two layer , 10 mm thick in each layer and mixed with water proofing liquid admixture on top layer of external surfaces of brick work or concrete surfaces including finishing the surface even and fair complete all as specified and directed. (Note: Water proofing liquid admixture shall be measured and paid seperately )
Supply only water proofing liquid administure for concrete / mortar complete all as specified an directed.
M&L for applying two coats of OBD over a coat of alkali resistant primer on newly plastered surface of wall including preparation complete all as specified .
M&L for applying two coats of OBD over a coat of alkali resistent primer on newly plastered surface of ceiling including preparation complete all as specified .
M&L for preparation of new treated plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer including preparation complete all as specified and directed.
Material and labour for complete removal of existing treatment, and applying two coats of OBD, over a coat of alkali resistant primer on old plastered surface of wall including preparation complete all as specified and directed.
Material and labour for complete removal of existing treatment, and applying two coats of OBD, over a coat of alkali resistant primer on old plastered surface of ceiling including preparation complete all as specified and directed.
Material and labour complete removal of existing treatment for applying two coats of cement base paint over a coat of alkali resistant primer on old plaster surface of celling including preperation complete all as specified .
Material and labour for one coat of white wash on old wall surface including preparation complete all as specified and directed.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.
Materials and labour for brick work with brick class designation 75 old size brick, straight or curved on plan, exceeding 6m mean radius, built in cement mortar (1:6), complete as specified and directed.
Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M&L for use and waste of formwork to sides & sofits of RCC shelves for rough finished concrete surfaces complete all as specified and directed.
Material and labour for providing reinforced cement concrete (1 :1.5 :3 ) type A1 (using 20 mm graded stone aggregate) as in shelves.complete all as specified and directed.
Material and labour for TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified & directed.
Supply and fix 18/19 mm thick prelaminated particle board , interior grade , pre laminated one side with teak wood lipping , fixed with screws as in covered kitchen cabinet with necessary fixing and locking arrangement like hinges knob, handle etc. including dismantling of aold unsv timber boardings complete all as specified and directed.
Material and labour for granite (of any type) work (table rubbed and polished in cooking platform, shelves and like in cement mortar 1:4 including pointing in white cement 20 mm thick using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Supply and fix curtain rod 25 mm dia of fany type anodised aluminium alloy with fixing brackets, stops rollers etc as in door and windows curtain etc complete all as specified and directed.
Supply and fix fancy type drapery rod bracket aluminium anodised complete all as specifed and directed.
Taking down/ dismantling loose/damaged concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof ceiling, louvers, parapets, column beam, lintel by hammering with wooden mallets carefully chipping off the old concrete surface with necesary scaffolding including cutting of rusted reinforcements if so required and disposal of old debris to outside the premises complete all as specified & directed
M&L for use and waste of formwork to sofits of chajjas, etc for rough finished concrete all as specified and directed.
M&L for use and waste of formwork to sides of pillars, post, struts, piers, columns and stanchions etc for rough finished concrete all as specified and directed.
Material and labour for providing reinforced cement concrete (1:1½: 3) type A0 (using 12.5mm graded stone aggregate) mixed with water proofing liquid admixture as per manufactures instructions as in columns, pillars, piers, posts and struts complete all as specified and directed. Note : Water Proofing Liquid admixture shall be measured and paid separately.
Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required & welding with existing bar complete all as specified and directed.
Material and labour for welding in repairs n. exc 2.5cm in length and thickness of metal to be welded exc.6mm but n.exc. 9mm complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floors and paving n.exc 15 cm thick ( below or above ground level) complete all as specified and directed.
M&L for 75 mm thick plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in flooring/ Plinth protection laid in alternative bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand) including finishing the surface fair and even complete all as specified and directed.
M&L for 40 mm thick cement concrete 1:2:4 type B 1 (using 20 mm graded stone aggregate) as in sub base, floor , paving complete all as specified and directed.
Material and Labour for chequered cement concrete tile 20x20x25 cm thick laid over 20 mm thick screed bed in CM 1:6 including set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles. complete all as specified and as directed .
Supply and fix in repair pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick (base metal thickness) of any colour having tensile strength of 550 Mpa as in roof covering, fixed with using hot dip galvanised, self drilling and self tapping screws complete all as specified and as directed. (Make of Galvalume sheet - M/S Tata Bluescope steel ltd. (colorbond steel) or equivalent in M/S JSW Steel Ltd / M/S Ispat Industries Ltd./ M/S Bhusan Power & Steel Ltd. ) (Note : Sheet shall be coated with hot dip alloy of 55% aluminium, 43.50 % zinc, 1.50% silicon, and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise described for, complete as specified and directed.
Supply and Fix MS Rolled section as in main and cross beams , hip and jack rafters , purlins where connected to common rafters with angle cleats or other connecting plates conforming to Fe 410-W( Gde-E-250) Quality-A complete all as specified and directed.
Material and labour for cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.
Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.surfaces, complete all as specified and directed.
Taking down ceiling fan / exhaust fan / wall mounted fan from existing position of high rise shed/ bldg, dismantling blades and removing fan and blades complete all as specified and keep in safe custody/ in office store for refixing the same complete all as specified and directed.
Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
Hanging only exaust fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
Material and labour for concealed point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of switches switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth for One light point controlled by one switch complete all as specified as directed. Note : (i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of chase cutting if any for wiring shall be deemed to be included in the quoted rate).
All as per Item No. 110 above but one ceiling/ exhaust / wall mounted fan point controlled by one switch and one regulator complete all as specified and directed.
All as per Item No. 110 above but one 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and directed.
All as per Item No. 110 above but one 3/5pin 6 Amp Socket outlet on the same board complete all as specified and directed.
All as per Item No. 110 above but one call bell point controlled by one switch complete all as specified and directed.
Material and labour for concealed point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of 16 A switches, sockets, etc and earth continuty conductor shall be connected to common earth complete all as specified & directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate. (iii) Cost of chase cutting if any for wiring shall be deemed to be included in the quoted rate).
Supply and fix switch piano flush button 5 Amp single pole one way 240 volt complete all as specified and directed.
Supply and fix socket outlet 3/5 pin 5 Amp 240 volt complete all as specified and directed.
Supply and fix switch socket combination 3/5 pin 5 Amp 240 volt complete all as specified and directed.
Supply and fix switch socket combination 3/6 pin 15 Amp flush type 240 volt complete all as specified and directed.
Supply and fix celling fan regulator (step regulator) switch type AC 230 volt suitable for ceilling fan any sweep complete all as specified and directed.
Supply and fix bell push 5/6 amps complete all as specified & directed.
S&F call bell ding dong type AC 230 volt single pole complete all as specified & directed.
S&F lamp holder PVC/Polycarbonate type with backplate suitable for batten fittings complete all as specified as directed
S&F celling rose surface,3 terminal of min da 63.5mm and ISI marked all as specified and directed.
Supply and fix box type luminiare, pre coated in white and pre-wired for single LED tube light 4 ft capacity suitable for single T8 LED tube rod 4ft 20 watt complete with LED tube rod T8, 20 W, 4ft long with extruded aluminium body, PC diffuser and inbuilt driver, holder, prewired fitted on two Nos 2nd class hard wood round block and connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fitting including taking down old unserviceable fitting any type complete all as specified and directed.
Supply and fixing LED batten mirror light 10 Watt extruded aluminium body, PC diffuser and inbuilt driver, prewired with electronic driver and diffuser and all accessories fitted on including two Nos 2nd class hard wood round block to be fitted on wall / ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down the old light fitting any type complete all as specified and as directed.
Material and labour for sub-main wiring in repairs with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 6 sqmm and one run of 6 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit of suitable size but not less than 20mm dia on shed/ wall / iron channel etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Two run of 6 sqmm cable one run of 6 sqmm cable alongwith PVC conduit shall be measured and paid as one unit. (ii) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of PVC casing conduit etc and also making good the disturbed surfaces are deemed to be included in unit rate. (iii) Cost of chase cutting if any for submain wiring shall be deemed to be included in the quoted rate).
Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 8 way, including taking down the old unserviceable DB complete all as specified & directed.
Supply and fix MCB single pole & neutral 32 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified & directed.
Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified & directed.
Supply and fix Blanking plate for MCB DB complete all as specified & directed.
Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron earth lead wire 4.0 mm dia length upto 7.5 mtr by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (light grade) not exc 7.5 mtr, alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 5 of SSR part-1 and testing on completion including taking out old earthing complete all as specified and directed.
S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire including taking out old wire complete all as specified and directed.
S&F GI pipe 15 mm bore 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking out old pipe complete all as specified and directed.
Supply and fix LED STREET/security light 45 Watt die cast aluminium housing with IP-65 protection and surface mounting device LED 45 Watt with lens with inbuilt driver prewired and SPD 5 KV building security luminaire including all fixing arrangement required to fixed on pole/ wall with suitable size of GI bracket including suitable size of fixing items such as clamps, nut bolts and washer of suitable size and connecting with existing electric supply with three run single core 1.5 sqmm copper conductor cable with flexible PVC conduit and making connections complete including taking down old light fitting any type complete all as specified and directed. Make - Century LED Ltd Cat part No. - SPSP045C / Equivalent Model of Makes specified in PS here-in-after.
Material and labour for sub-main wiring with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 2.5 sqmm and one run of 2.5 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring all as specified and directed (Note : (i) Three run of 2.5 sqmm cable one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of cable and also making good surfaces are deemed to be included in unit rate).
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .