RENOVATION OF MENS HOSTEL I AND II

Amount

Dismantling the tile work in floors and roof laid in cement including stacking of materials within 50 metres lead for thickness of tiles 10mm to 25mm

Dismantling doors, windows and clearstory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead

a) Of area 3 sq.m. And below

Demolishing R.C.C. Work including stacking of steel bars & disposal of unserviceable within 50m lead

Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead.

Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area

Earthwork in surface excavation not exceeding 30 cm depth(but exceeding 1.5 m width as well as 10 sq.m on plan) including disposal of excavated earth beyond work site for all leads lift disposed earth to be leveled and neatly dressed in:

a) ordinary Soil

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1:4 ( 1cement : 4 coarse sand ) in foundation and basement

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded granitic or basaltic stone aggregate 20mm nominal size ) excluding cost of centering, shuttering and finishing in :

a)all works up to plinth level

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : a All works upto plinth level

12mm cement plaster 1: 3 (1 cement ; 3 coarse sand) finished with a floating coat of neat cement.

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge

Brick work using fly ash bricks in cement mortar 1:4 ( 1 cement : 4 coarse sand) with bricks of class designation 40 kg/ cm2 in superstructure up to floor five level

(b) 230 x 110 x 80 mm

Half brick masonry using fly ash bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 40 kg/cm2

b) above plinth upto floor V level 200x95x95

Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm.

b) 60mm thick with Grey colour (M35 grade)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm

a) Jet black

Providing 20mm thick Jet Black both sides polish granite slab to urinal partitions with cement complete

Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer-in-charge

Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) a)20 mm thick

Providing and fixing vitrified matt finished (600x600) and 10 mm thick tiles in floors/treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete (Somany,Johnson, Kajaria make)

Providing and fixing vitrified antiskid tiles (320x320) and 10 mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.(Somany,Johnson, Kajaria make)

Providing and fixing 1st quality ceramic glazed wall tiles ( Johnson, Somany, Kajaria) conforming to IS:15622 ( thickness to be specified by the manufacture of approved make in all colours,shades except burgunady, bottle green, black of any size as approved by Engineer in charge in skirting,risers and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand ) jointing with grey cement slurry @ 3.3Kg per sq.m. including pointing in white cement mixed with pigment of matching shade complete (Somany,Johnson, Kajaria make)

b) Wall ceramic glazed tiles : 300x450

Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of cement primer of approved brand and manufacture on wall surface

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade. ( Satin finsh)

Applying one or more coats of zinc rich epoxy prmer on Steel work of approved brand on New work to give an even shade

Painting two or more coats of Anti-corrosive Epoxy Paint on Steel Work of approved brand on New work to give an even shade.( Asian Paints / Surfa Coat)

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Providing and fixing precast reinforced concrete door frames of ASTRA make or equivalent in M25 grade concrete and reinforced with minimum three bars of 6 mm dia and confirming to IS:6523. The frames shall be manufactured in approved factory with all the necessary arrangements for fixing hinges, tower bolts by way of inserted PVC blocks and holes for receiving sliding bolts as specified. Sectional size of frame with single rebate : 60X 100 mm

Providing woodwork in frames of doors, windows, clerestory windows trusses & otherframes wrought framed and fixed in positon

First class matti wood

Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including anodized aluminium butt hinges with necessary screws

First class indian teak wood

Wood finish wood core FRP ( Fiber REinforced Polymer) Door Shutter.Manufacture, supply and installation ( including accessories as mentioned below) of EPEE/laxmi fibres or equivalent Goan make FRP ( fibre reinforced polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for top rail and lock rails. FRP ( fibre reinforced polymer) laminate made up of 450 grams per square mtr ( gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centiposes per second( cps) and printed matt having wooden textures used along with UV resisitent resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board. The shutter to be water proof as well as mild acid/alkali resistant manufacture using RV TIFAC ( R V Engineer college, Bangalore & Technology information forecasting and assessment Council) technology in line with IS 13034 1990 test standard in an ISO 9001-2008 certified factory.

Accessories

i) S.S Hinges 4”— 04 nos

ii) S.S Latch- 01 no

iii) Tower bolt 5” -----02 nos

iv) Handle 5” ------ 02 nos

Shutter thickness

Note: for 35 mm thickness shutters only frames of 5” x 21/2

Inch cross section frames to be used.

Providing & fixing aluminium shutters( Jindal Make) as per design including transportation, scaffolding and handling etc, complete. , Adjustable louvered windows using 25 mm x 50 mm tube with exhaust provision with 3.5 mm pin headed glass complete.

Proving and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings, rack bolts 32 mm diameter P.V.C telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon pull complete cutting and making good the walls and floors where required(HINDUSTAN/CERA)

b) Orissa pattern W.C. pan

Providing and fixing vitreous China water closet squatting (European type W.C pan) with seat and lid C.P brass hinges and rubber buffers 10 lts high level PVC flushing cistern ( of cera conventional “s” /p trap) with fittings rack bolts, 32 mm, dia PVC telescopic flush pipe with fittings and clamps 25 mm PVC over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon chain and pull complete, cutting & making good the walls & floors where required. ( HINDUSTAN/CERA)

a) WC pan – Hindustan /Cera conventional EWC of white colour with white plastic lid & seat.

b) PVC FLUSHING CISTERN ( HINDUSTAN/CERA)

White colour Hindustan sleek with all fittings.

Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required.

c) Flat back wash basin size 550 x 400mm with a pair of single 15 mm C.P. brass pillar taps. ( Swan neck)

Hindustan(constellation )/equivalent Cera make

Providing and fixing urinal valve auto closing system CP with built in control cock with 8 mm dia 300 mm long pipe, wall flange etc. complete. JACQUAR make (JAQ-077)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 430 x 265 mm sizes respectively with pvc automatic flushing cistern with fittings, R.S. or C.I. brackets, standard size galvanised steel flush pipe and spreaders with brass unions & G.I. clamps complete, including painting of cister and fittings, cutting and making good the walls and floors where required.

a) One urinal basin with 5 litres p .v .c. automatic flushing cistern.

Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw , ARK supreme / Omco make

Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers.

Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws ( Jaquar/ ARK make)

a) 750 x 20 mm size

Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :

a) 110 mm dia

Providing and fixing C.P jali (Round)

Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore:

c) 45 cm (18”) length .

Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet: ( ARK/ OMCO make)

150 mm diameter.

Providing and fixing Nickel chrome plated copper alloy BIB cock ( long body) JAQUAR make with wall flange or ARK SUPREME confirming to IS 8931; 1993

a) 15 mm nominal bore

Providing and fixing NICKEL chrome plated copper alloy Fancy two way long body BIB cock with wall flange JAQUAR or ARK SUPREME confirming to IS 8931; 1993

a) 15 mm nominal bore

Providing and fixing CP concealed angle stop cock (heavy) with wall flange of (ARK SUPREME/JAQUAR) make 15 mm nominal bore

Providing and laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone, aggregate 40 mm nominal size) alround S.W. pipes including bed concrete 15 cm thick as per standard design

b) 150 mm diameter.

Providing and fixing chlorinated polyvinyl chloride (CPVC) Pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1mt. Spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work ( medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.

b) 20 mm dia normal outer dia pipes

c) 25 mm dia normal outer dia pipes

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaD fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall.

I SCH-80(blue)/(white)

b 25mm outer dia.

d 40mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer. External work.

I SCH-80(blue)/(white)

c 32mm outer dia.

d 40mm outer dia.

e 50mm outer dia.

Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:

a) 110 mm dia

b) 75 mm dia

Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :

a) 110 mm dia

b) 75mm dia

Providing and fixing single “Y”of rigid PVC S.W.R pipes (soil, waste & rain water drainage pipes of approved make including lubricant etc. complete ,with door

a) 110 mm dia

b) 75 mm dia

Providing and fixing rigid PVC bend ( approved make) for SWR pipes including lubricating etc complete, with door

a)110 mm dia

b) 75mm dia

Providing and fixing double “Y”of rigid PVC S.W.R pipes (soil, waste & rain water drainage pipes of approved make including lubricant etc. complete ,with door

a) 110 mm dia

b) 75 mm dia

Providing and fixing R.P.V.C vent cowl

a) 110 mm dia

Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design :

b) 150 x 100 mm size –P or S type

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) RCC top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 40mm nominal size )inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) neatly finished complete as per standard design.

a)Inside size 90 x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x610mm internal dimensions total weight of cover ad frame to be not less than 38 kg. (weight of cover 23 kg. )

d) Inside size 60 x 60 cm and 60cm deep including C.I cover with frame (light duty ) 455 x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 Kg)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws. a)plain grill

Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore:

30 cm (12”) length

Providing and placing on terrace roof of floor two (1st floor roof) single piece rotational moulded polythene water storage tank having ISI mark and confirming to IS 12701; 1996 including tank connectors.

a) 1000 lit capacity

B- Electrical Items

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

(d) Group A -- with Cat B Modular Accessories

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required.

(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)

(c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)

Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 1 no 6 pin 15/16 A modular socket outlet and 1 nos 15/ 16 A modular switch connection painting etc. as required. ( For workstations)

(b) Cat B

Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required.

(b) Cat B

Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories. Crompton, Bajaj, Orient, Khaitan, Almonard

(a) Cat A

Supply and erecting of 12 inch (300 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories. Crompton, Bajaj, Orient, Khaitan, Almonard

(a) Cat A

Installation, earthing, testing and commissioning of exhaust fan upto 450 mm sweep in the existing opening including making the hole to suit the size of the above fan making good the damage connections testing commissioning etc as required

Supplying and fixing following way TPN sheet steel, double door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCB and busbars of following ways (but without MCBs as required)

(d) 4 way (8+12), double door, Vertical type, Cat B

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.

(f) SP, Cat B

Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.

(i) TP, Cat B

(j) TPN, Cat B

Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.

3 Core 2.5 sq.mm

3 Core 6 sq.mm

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.

3 Core 2.5 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.

Supplying & erecting corridor/passage light fitting (2 feet) including 9W LED lamp, comprises of extruded channel in plastic silver grey colour & with same plastic end cap on privided PVC block / wooden board

Supplying and erecting storage type horizontal / vertical water heater 15 litres capacity with BEE 5 star rating high impact resistance engineering plastic body on wall / loft complete duly tested and marking sr. no. and date of erection. specification no. AP-WH/STWH

Supplying and erecting LED street light fitting suitable for above 70W- 75W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded

Supplying and erecting street light Wall bracket made from 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB

Supplying & erecting FRP box of size 150 x 125 x 100 mm, 2.7 mm thick complete on pole/wall as per specification no. CB-SB

N. Anirudhan

Ashok Maruti Harijan

LOTLIKAR AND SONS