Three year Maintenance work of Patri Dressing, Jungle Cleaning, Drain Cleaning, Painting Work and other Miscellaneous Civil Work Sector MU-I Greater Noida.

PART-1 JUNGLE CLEANING& PATRI DRESSING

Cleaning jungle including up rooting of rank, vegetations grass, push, wood trees and samplings of grith upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish up to a distance of 50M. out side the periphery of area cleared. SOR-20/259(i)

Same as above 259(1) above but grass only SOR-20/259(A)

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. (all kind of soil.) DSR-18/2.28.1

Tractor with trolley including Pol & driver (A.R./GNIDA) SOR-2020/Sl.No-19/Chapter-2

Supply of Labour(A.R./GNIDA) SOR-2020/Sl.No-12

PART - DRAIN CLEANING

Excavation in foundation in ordinary soil. (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine con not reach/move). Sor-20/251(a)

Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required DSR-18/2.24.1

Cartage of earth or fly ash when added to schedule item no-253(SOR-261)

IInd Km. and beyond SOR-20/261 (C)

PART-P&F DIRECTION BOARD

Excavation in foundation in ordinary soil. (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine con not reach/move). Sor-20/251(a)

Providing fixing rcc dirrection board of Size 200 x510x80mm make in concrete 1:1.5:3 including reinforcement shuttering etc all

Cement Concrete with 2 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-279 A)

Painting or varnishing with valsper or other approved high grade enamel or supar synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm ISI no. 105/106/133-1950.SOR-647

As in item (647) above but for every subsequent coat on previously treated surface. SOR-20/648

Repainting letters up to 2.5 cm. size including supply of all materials, labours & tools and plants ete, required for proper completion of the work. SOR-20/820

As in item 820 above but size above 2.5 cm. but up to 8 cm. SOR-20/821

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 The finished surface to be level, uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty etc all T&P/machine material and labour required for proper completion of work SOR-20/19.01/New Item/ Pg No-25

Tractor with Water tankor with Cost of water including POL SOR-20/SL.No.27/Chapter-2/Pg No-8

supply of labour for water tanker( AR GNIDA) SOR-20/Sl.No-12/ Chapter-2

Providing jcb with driver and including pol (AR GNIDA) SOR-20/Sl.No-31/ Chapter-5

M-150 Brick Work in 1:4 cement & Coarse sand 2.2 F.M. mortar in foundation and plinth including supply of all materiais, labour and T&P etc. requried for proper completion of the work. SOR-305a

12 mm cement plaster: 1:6 (1 cement: 6 coarse sand) DSR-18/13.4.2

Reinforced cement concrete in open foundation complete as per drawing and technical specifications RCC Grade M25 using batching mix plant transit mixture and manual placing (MORTH-9.06E/Case-II)

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to Plinth Level.

Thermo mechanically treated bars of grade Fe-500D or more. DSR-18/5.22.6

Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc required for proper completion of the work SOR-20/279

Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm, gauge stone ballast SOR-20/279 (A)

Labour Cess and GST will be paid extra as per govt. orders