UPGRADATION OF TILING IN BEDROOMS OF DEF CIV QTRS AT P-16, PB-18 AND PB-19 AND UPGRADATION OF WASH ROOMS, CUPBOARDS OF NILGIRI COMPLEX (BLOCK NO 19/C/1 TO 19/C/5) AT DSSC WELLINGTON.

Amount

BR PORTION Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust, etc

M&L Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 over cement slurry @ 3.00 Kgs / sqm.

Material and labour for coloured light shade ceramic tiles 600 x 600 x 8 to 10 mm size as in flooring set and jointed in neat cement slurry and pointed in coloured cement to match, on flooring, all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone wall etc incl racking out joints, hacking for key scrubbing down with water etc.

M& L Rendering in CM (1:4) 10 mm thick on fair surfaces of brick/ concrete surfaces of wall finished even and fair to receive tiles for dado/ skirting

Same as item no :3 but tiles in skirrting/dado

Refixing Shutters of any description exc 1 sq. m and n exc 2 sq. m each description including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, in same position and complete all as specified and as directed

S&F 18/19mm thick Particle board, exterior grade prelaminated both sides with decorative choice lamination, fixed with nails/ screw screws to timber frame work including liping work teak wood beading 6mm thick comple all as specified and directed

S&F Continuous (Piano) hinges brass, bright finish width of flaps 40mm

S&F extruded brass handle fabricated type 75mm size and complete all as specified and directed

Supply and fix Magnetic closer of suitable size for kitchen cupboards fixed with screws complete all as specified and directed.

Material and labour for plain Cement Concrete 1:2:4 type B1 using 20 mm graded stone aggregare 100 mm thickness as in padding concrete for floor/chejjas etc.including necessary form work finished even and fair all as specified and as directed

M&L for preparing old wood surfaces and applying one coat of synthetic enamel paint on wood surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed.

M&L for complete removal of existing treatment on surfaces of wall &applying with white putty and making the surface to an even &smooth finish,rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer to be applied by approved applicator of the manufacturer of the paint and all as specified and as approved

Dismantiling posts (or) struts (wood, RCC (or) steel any section , including taking out embedded portion and making good distrubed ground concrete brick work masnory etc..,

Excavating in post holes each n.exc 0.50 cum getting out hard dence soil including returning filling in and ramming earth or broken rubble mixed with earth around ,in layers n.exc 25 cm ,watering and removing surplus soil to a distance n.exc 50 mtr and making good surface.

Material and labour for plain cement concrete 1:2:4 type B2, using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and as directed.

S/F Joist, channel, angle ot tee sections, post fixed independently, without connecting plates, etc(cut to ordinary lengths i.e within 20mm of the length indicated quality conforming to Fe 410-W(gde-E-250)quality-A

S&F for MS flat iron fillets in posts and struts in fencing ,drilling holes (for securing wire mesh etc),including necessary drilling ,bolting or riveting etc confirming to Fe 410-0or fe 310-0

Dismantling fencing wire mesh any type

Supply only Chain link MS galvanised fencing, any size (or) type of 3mm to 4mm dia wire.

Fixing only chain link fencing including line wires, any mesh, size and type toany type of standards, rails, straning bolts, etc. including provision of binding wire

S & F 5 to 10mm mild steel in flat, round (or) square bars, in available length FE 410 W (GDE- E- 250) quality A

S&F mild stell screw bolts of 11 to 15 mm diameter of shank (machine made ) with hexagonal or squre heads at one end and screwed the other ,each screwed end to to be fitted with washers and one hexagonal or squre nut , exceeding 5 cm and not exceeding 10 cm long.

M&L for preparing new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed.

Demolition of floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises (incl removed demolition mtrl from site with 1 km radius from site) complete all as specified and directed

M&L for non skid ceramic tiles 6 to 7mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.11 sqm, in floors and scantling etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed bed in CM 1:4 complete all as specified and directed

M&L for coloured glazed ceramic tiles in vertical surface 300 x 600 x 6 to 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match placed in 10mm thick CM 1:3 complete all as specified and directed

M&L for 25mm thick PCC type B-0 1:2:4, using 12.5mm graded crushed stone aggregate as in flooring to receive tiles etc complete all as specified and directed

S&F 15mm bore medium grade tubes, galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors incl taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore complete all as specified and directed

S&F 5.50mm thick looking mirror of size 600x450mm on 6mm thick (Teak/PVC beading) (Water proof plywood/AC sheet backing) including framing with 1st class hard wood of size 40x40mm decorative type polished complete all as specified and directed

S&F 15mm dia bib tap long nose with flange complete all as specified Make : Prayag Cat No 7209 or equivalent in Parryware/Hindware) complete all as specified and directed

S&F 15mm dia angle cock with flange complete all as specified Make : Prayag Cat No 7210 or equivalent in Parryware/Hindware) complete all as specified and directed

S&F corner glass shelf 300mm (with ABS brackets) complete all as specified Make : Prayag Cat No BEA-46 or equivalent in Parryware/Hindware)

S&F PVC connection with brass nut 600mm long complete all as specified Make : Prayag Cat No BCT-04 or equivalent in Parryware/Hindware)

S&F peg set 6 complete all as specified Make : Prayag Cat No BEA-30 or equivalent in Parryware/Hindware)

S&F Towel rod of 15mm dia complete all as specified Make : Prayag Cat No BA-01 or equivalent in Parryware/Hindware)

S&F soap dish complete all as specified Make : Prayag Cat No BA-05 or equivalent in Parryware/Hindware)

S&F health faucet with 1.5 mtr tube & hook complete all as specified Make : Prayag Cat No BEA-41 or equivalent in Parryware/Hindware)

S&F corrugated waste pipe 31/32 x 800mm complete all as specified Make : Prayag Cat No 327 or equivalent in Parryware/Hindware)

S&F PVC (SWR) floor trap plain with grating incl. jointing with solvent cement (100 mm bore)

S&F Viterous china wash down water closet pan (pedestal pattern) and 'P' or 'S' trap including fixing bolts, PVC bend, seat cover of white colour and connecting to PVC (SWR) pipe including taking down of existing seat complete all as specified (Excl flush tank) : Make : Prayag or equivalent in Paryware/Hindware

S&F as in repairs PVC valveless, symphonic action type low level flushing cistern white with inlet, ball valve, float and handle etc complete capacity 10 litres including brackets and upto 1mtr long PVC pipe of 40mm dia and bend complete all as specified and directed.

Dismantling of PVC or reinforced cement concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as spd and directed

S/F PVC ( SWR) pipes single socketed in any length with rubber ring joints,fixed to walls 110 mm mm dia

S&F PVC (SWR) bends any radius 110 mm bore. complete all as spd and directed

S&F PVC (SWR) branch piece of 110mm dia, single (single Y) equal or unequal complete all as spd and directed

S&F stainless steel grating 100mm dia fixed in white cement complete all as specified and directed

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed

S&F for 2nd class hard wood plain solid ,straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints. complete all as specified and directed

S & F for HDHMR Board 18mm thick both side /exposed surfaces laminated any colour, as in Shutter vertical support and horizontal shelfs including necessary fittings of screws/MS Brackets in kitchen cupboard complete all as spd and directed. Make :- HDHMR board : ACTION TESA ,Centuryprowud premium plus ,Green ply or techno commercially equivalent as approved by Accepting officer.

S&F in soft close stainless steel hinges 75mm complete all as specified and as directed. Make : EBCO or techno commercially equivalent HETTICH, KAFF, GODREJ and EBCO.

S & F Gunmetal handle 150mm complete all as spd and as directed. Make : HANDLE : RICH or techno commercially equivalent,HETTICH, KAFF, GODREJ,EBCO.

S & F stainless steel telescoping channel for drawer including necessary fitting upto length upto 600mm complete all as spd and directed.Make : HETTICH, KAFF, GODREJ,EBCO.

S & F Stainless steel racks for crockery of kitchen drawer as approved design and stand quality of length 600mm complete as directed.Make:-HETTICH, KAFF, GODREJ,EBCO.

S&F magnetic catcher for cubboards all as specified and directed

S&F Hasp and staple (Safety type) aluminium anodised including bolt to hinge plate and fixed with screws, 100mm size, complete all as specified and directed

S&F MS work as in hold fast etc conforming (Fe-290 Gde-165) complete all as specified and directed

M&L for PCC type B-0 (1:2:4) for fixing of hold fast etc complete all as specified and as directed

Demolition of cement Concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) or as in sunken (incl removed demolition mtrl from site with 1 km radius from site)

M&L for APP modified water proofing membrane mineral finish, 3mm thick and weighing not less than 3.6kg/sqm reinforced with non woven ployster matt black finished weighing not less than 100 gm/Sqm having softening point not less than 140 degree celsius longitudinal tensile strength not less than 300N/Sqcm side lap & end lap 15cm over coat of bitumen primer " 0.20 KgSqm & applying a coat of blown grade bitumen 90/15 over the memberance " 1.2 Kg/Sqm & finshed all as specified & directed.

Rendering 20mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound FOSROC's complast 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry for roof slab/ floor complete all as specified (liquid water proofing compound are measure seperately)

M&L cement Concrete type E2, (1:5:10) using 40mm graded stone aggregate as in sunken floors .

M&L cement concrete type B1, 1:2:4 using 20mm graded stone aggregate 40mm thick as in flooring with using 3% WPC etc.

Supply only integral water proofing compound all as specified.

Cutting out cracks to V-section in existing roofs / terracing / walls / celing, cleaning out, wetting, grouting with cement and sand slurry 1:3 using water proofing Compound including staging upto 10 mtrs height where ever necessary.

Demolition of brick work or stone / boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified.

M&L for precast cement concrete solid building blocks masonaryexe 10 cm in width and setting in mortar 1:4 type C-1 1:3:6 (20 mm graded agregate )

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 without using extra cement.

M&L rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling and finishing the surface even and smooth without using extra cement. (ceiling)

M&L for preparation of newly plastered surfaces of walls including applying two coats of weather coating external emulsion (APEX ULTIMA) over a coat of primer on walls all as specified and as directed.

M&L for preparing new plastered surfaces of ceilling and applying 3 coats of white wash.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., and removing unserviceable debris off the premises all as specified and as directed.

EM PORTION S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/Legrand/Anchor

S&F Surface and wall mounted LED batten 10 watts 2 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make : LUKER, Cat No LT510P or techno-commercially equiv In Havells/Philips

S&F Surface and wall mounted LED batten 24 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make : LUKER, Cat No LT5M24 or techno-commercially equiv In Havells/Philips

S&F IP >= 66, IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W with min 800 lumens made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed incl taking down old/unsv fittings. Make : Havells, Cat No HEXAFT10WLED857SSYMBOPC or techno-commercially equivalent in Philips/Wipro

Supply and fix energy saving high power LED building security light of 25W made up of pressure die cast aluminum housing with embedded PC cover having top opening, seperate driver compartment with IP66 protection, IK-09 and making electric connections in flexible conduit with & incl GI Pipe bracket of appropriate dia & necessary fixing arrangements like clamps, nuts, bolts, washers etc. complete all as specified & as directed incl taking down old/unsv fittings. Make: Cat No ENDURASUNDOWNSL25WLED765PASYBOPCIHD of Havells or techno-commercially Equivalent in Philips/Wipro

S&F decorative wall mounting fixture luminaire with PC diffuser suitable for lamps with B22 with all accessories internally prewired and including connecting up complete all as specified and as directed. Make: Havells, Cat No:LHFOECE1TZ1O014, Model - Stylo or techno-commercially equivalent in Philips/Wipro

Supply and fixing in repairs LED lamps of the 10W, 6500K with B-22 base cap all as directed by the Engr-in- Charge Make : Havells/Philips/Wipro

M & L for Surface point wiring with two single core 2.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including Casing-Capping (medium grade) with all fittings and accessories ISI marked incl provision of 2.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular PVC boxes of appropriate size, making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Make of cable : Havells/Polycab/Finolex.Make of casing-capping-Precision/Modi/Pressfit

S & F Modular switch, one way, 16 Amp with Indicator, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXIW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing PVC surface box flush to wall suitable for fixing switches of 1/2 modules complete all as specified & as directed. Cat No : ACNXMIZX01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing modular cover plate suitable for fixing switches of 1/2 modules all as directed. Cat No : ACVPPCWV01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply, Fix, Installing and Testing Vertical type Storage electric water heater (Geyser) of 25 Ltrs capacity, Tank made of ultra thick super cold rolled steel plates with high density PUF insulation, 2 KW, 230 V, Single Phase, 50 Hz, AC, BEE 5 Star rated, suitable for a pressure rating of 0.8 MPa Bar with 7 years warranty on inner tank, 5 years on heating element & 2 year comprehensive warranty with & including connected accessories and 2 Nos anchor fasteners of size as per manufacturer instructions grouting and fixing and making good the disturbed surface complete and connecting electrical and water supply connection using steel braided hose 2 Nos complete all as specified and directed by the Engr-in-Charge. Model - Monza DX of Make: Havells, Cat No: GHWAMGTWH025 or techno-commercially equivalent in Racold/Bajaj Note : (i) Installed Geyser's warranty card should be submitted to the Engr-in-Charge. (ii)The cost of making good the disturbed surface and matching to the existing/original surface is deemed to be included in the unit quoted rates.

S&F angular stop cock 15mm dia with wall flange screwed both ends for GI Pipe etc., fancy type & chromium plated complete all as specified and as directed by Engr-in-Charge. Cat No : AQT-3057 of make Jaguar or techno-commercially equivalent in Kohler/Cera.

S&F Bib cock 15 mm dia with wall flange screwed for GI Pipe etc., fancy type & chromium plated complete all as specified and directed by Engr-in-Charge. Cat No : CQT-23047 of make Jaguar or techno-commercially equivalent in Kohler/Cera.

M&L for galvanised steel water tubing with all fittings, Medium grade, ISI marked, 15 mm bore, fixed or concealed in walls, laid in floor etc. including all jointing materials complete all as specified and directed by Engr-in-Charge. Make: TATA/Jindal/Prakash Note : 1) The cost of clamping of water tubing on walls/ceilings etc. is deemed to be included in the unit quoted rates.

Imp Notes for Item Nos 75 to 79 & 82 to 89: 1) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned. 2) Cost of making good the disturbed surfaces as per existing/original surface is deemed to be included in the unit quoted rates.

Cutting the existing outlet pipe of size 15 mm dia for making branch connection for and including new tee complete all as specified and directed by Engr-in-Charge. Note : Cost of making good the disturbed surfaces as per existing/original surface is deemed to be included in the unit quoted rates.

GMS Builders

Sree Constructions

K.AYYAPPAN

S.RAMACHANDRAN

sree devi construction

VVM CONSTRUCTIONS