Construction Of 100 Bedded State welfare Residential Boy's Hostel at chakai, JAMUI (with electric work)

BOQ for Construction Of 100 Bedded State welfare Residential Boy's Hostel at chakai, JAMUI (with electric work)

BOQ Amount:- 45,872,131.00 Time of completion:- 09 Months

Earnest money:- 918000.00 Cost of BOQ:- AS per e-proc2

Sl. No. SOR-22 Item Of work Qty. Unit Rate Amount

1 2.32 Clearing jungle including uprooting of rank vegetation ,grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 1709.05 100 m2 697.40 11,919.00

2 2.6.1 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m inwidth as well es 10 sqm on plan) including disposal of excavated earth , leadupto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatlydressed. 641.93 m³ 314.90 202,144.00

3 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil. 282.00 m³ 360.70 101,717.00

4 2.25A Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead 197.12 m³ 411.70 81,154.00

5 2.27.1 Extra for every additional lift of 1.5 m or part thereof in all kind of soil etc. all complete jobs. 212.46 m³ 49.40 10,496.00

6 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 915.15 m³ 287.30 262,922.00

7 Derived Providing designation 100A fly ash brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l. 1241.00 m² 290.04 359,940.00

8 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 69.76 m³ 3998.10 278,903.00

9 4.1.5 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:3:6(1 Cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) 1.86 m³ 3434.00 6,387.00

10 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size 0.74 m³ 4688.30 3,469.00

11 5.33.1.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-25 grde reinforcd cement concrete. 252.13 m³ 5063.40 1,276,630.00

12 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 464.28 m³ 123.90 57,524.00

13 5.33.2.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-25 grde reinforcd cement concrete. 499.52 m³ 5863.20 2,928,786.00

14 5.9 Centring and shuttering including strutting,propping etc. and removal of form for.

A 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. 395.16 m² 211.60 83,616.00

B 5.9.3 Suspended floors, roots, landings, balcnies and access platform. 874.69 m2 437.50 382,677.00

C 5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers. 1439.41 m² 404.70 582,529.00

D 5.9.6 Columns,Pillars,Piers,Abutments, Posts and Struts 1311.77 m² 494.40 648,539.00

E 5.9.7 Stairs,(excluding landings) except spiral-staircaces. 51.92 m² 439.90 22,840.00

F 5.9.16.1 Edges of slabs and breaks in floors and walis- Under 20 cms wide 463.23 m 130.20 60,313.00

G 5.9.19 Weather shade,Chajjas, corbels etc. including edges 84.43 m² 550.90 46,512.00 #REF!

H 5.9.4 Shelves (Cost in situ) 450.58 m² 437.50 197,129.00

15 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

16 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in Cement mortar 1:6 (1 cement: 6 coarse sand )foundations and plinth in etc. 424.02 m³ 4923.00 2,087,426.00

17 6.1.12C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : in superstructure above plinth and upto floor V level. 40.39 m³ 5116.30 206,647.00

18 6.3C Extra tor Brick work in superstructure above plinth level upto floor V cum 425.32 m³ 842.20 358,205.00

19 13.24.2 Providing 6 mm cement plaster to ceiling of mix 1:4(1 cement: 4 coarse sand) etc. complete. 2264.36 m² 125.60 284,404.00

20 13.11.4 Providing 12 mm cement plaster of mix 1:6(1 cement: 6 coarse sand) etc. allc omplete. 4058.62 m² 141.50 574,295.00

21 13.12.2 Providing 15 mm cement plaster on rough side of single or half brick wall of mix 1:4(1 cement: 4 coarse sand) etc. all complete. 2543.66 m² 176.40 448,702.00

22 13.26 Neat cement punning over plaster surface etc. 191.45 m² 40.50 7,754.00

23 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth 77.56 m² 436.60 33,863.00

24 Derived Providing250mmwide fly ash brick drain incementmortar (1:6) withav. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation100-Aflatsolinginpropergradeandslopeat thebase.the drain duly.plasteredinCM.(1:3)withpunningoverexposedsurfaceall complete as per building specification and direction of E/l, 103.42 m 1097.49 113,502.00

25 10.15.2.1 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile C 295.17 m 432.60 127,691.00

26 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions. Powder coated 283.87 kg 418.40 118,771.00

27 21.1.2.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately):Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 1349.80 Kg 480.20 648,174.00

28 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 152.33 kg 809.30 123,281.00

29 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

(i) 9.48.1 Fixed to steel windows by welding 3773.97 Kg 144.50 545,339.00

30 10.18 Providing and fixing M.S.fan Box type I or II of 16 mm dia.M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop,all as per standard design complete. 100.00 Nos. 165.40 16,540.00

31 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 687.60 KG 546.80 375,980.00

32 11.26 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand) 503.35 m² 1252.70 630,547.00

33 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.Size of Tile 60x60 cm 892.66 m² 1638.80 1,462,891.00

34 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 39.87 m² 1334.90 53,222.00

35 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600 x 600 mm. 57.31 m² 1191.80 68,302.00

36 11.31 Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab. 361.20 m 82.90 29,943.00

37 11.32 Extra for Kota stone / sand stone in treads of steps and risers using single up to 1.05 metre.length 71.38 m² 18.10 1,292.00

38 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. 197.47 m² 686.80 135,622.00

39 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 709.32 m² 795.00 563,909.00

40 8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 15.46 m² 4242.90 65,595.00

41 8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 29.88 m² 4401.20 131,508.00

42 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions. (ii) 2nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand)mixed with water proofing compound in recommended proportion, (iii) 3rd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) 4th course of 400 micron thick PVC sheet.(Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni). 77.84 m2 480.60 37,410.00

43 22.8.1 Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs, balconies , terraces etc, consisting of following operations. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water -proofing compound cleaning the surface before treatment, (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50 % of cement mortar 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water froofing compound conforming to IS 2545 to reuired slope and treating similary the adjoining walls upto 300 mm height including rounding of junctions, or walls ad slabs. (c) After two days of proper curing applying a secoung coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test, All above operations to be done in order and as directed and specifed by the Engineer-in-Charge. 388.85 m2 850.70 330,795.00

44 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete 10.00 Nos. 189.4 1,894.00

45 13.116 Forming groove of uniform size in the top layer of washed stone grit piaster as per approved pattern using wooden batten nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charges. 1801.92 m 47.10 84,870.00

46 9.6.3 Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, all complete as per directions of Engineer-in- Charge and panelling with panels of: 93.68 m² 2894.90 271,194.00

47 9.130.1 Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked,exterior grade (Grade I), of approved make including IInd class teak wood lipping of 25 mm wide x 12mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. 326.50 m² 1432.00 467,548.00

48 21.13 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 100.00 No 365.20 36,520.00

49 9.165.1 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm 100.00 No 103.40 10,340.00

50 9.97.3 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ), transparent or dyed torequired colour or shade, with necessary screws etc. complete:200 x 10 mm 100.00 No 71.60 7,160.00

51 9.59.1 Providing and fixing ISI marked oxidised M.S. single acting spring hingeswith necessary screws etc.complete: 100.00 No 169.10 16,910.00

52 Providing and fixing aluminium door Fittings, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

9.96 Sliding Door Bolt

53 9.97 Sliding Tower Bolt

9.101.1 hanging floor door stopper

Twin rubber stopper 40.00 Nos. 60.80 2,432.00

55 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 7415.30 m² 105.40 781,573.00

56 13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade 5460.35 m² 102.30 558,594.00

57 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 3281.99 m² 137.00 449,633.00

58 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: 375.06 m² 84.50 31,693.00

59 9.150 Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete. 164.00 no 160.800 26,371.00

60 9.151 Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete 328.00 no 88.60 29,061.00

61 9.148 Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows,of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-incharge. 32.00 no 299.00 9,568.00

62 9.60.1 Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 4.00 no 250.90 1,004.00

63 16.90 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622, of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge 6.48 sqm 1464.30 9,489.00

64 NS Signages 0.00 0.00

65 17.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:

66 17.1.1 White Vitreous china Orissa pattern W.C pan of size 580x440mm with integral type foot rests. 10.00 Each 4470.90 44,709.00

67 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

68 17.2.1 W.C pan with ISI marked white solid plastic seat and lid 8.00 Each 4230.00 33,840.00

69 17.7 Providing and fixing wash basin with C.I brackets, 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

70 17.7.8 White Vitreous China Flat back wash basin size 550x400mm with single 15mm C.P brass pillar tap. 15.00 Each 3694.30 55,415.00

71 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required:

17.10.2 Kitchen sink without drain board

72 17.28 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete.

17.28.2 Flexible pipe

73 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 12.00 Each 3723.20 44,678.00

74 17.32.2 Providing and fixing mirror of superior glass and of required shape and size with plastic molded frame of rectangular shape 453x357 mm. including all cost of labour, materials, taxes, etc. all complete. 15.00 Each 857.00 12,855.00

75 17.33 Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc. complete. 15.00 Each 713.30 10,700.00

76 17.73.1 Providing and fixing PTMT towerl rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 15.00 Each 397.30 5,960.00

77 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

18.8.2 20 mm dia nominal bore 250.00 Metre 350.80 87,700.00

18.8.3 25 mm dia nominal bore 246.00 Metre 463.10 113,923.00

18.8.4 32 mm dia nominal bore 47.00 Metre 549.80 25,841.00

18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including, cutting and making good the walls etc.

78 18.10.4 32 mm dia nominal bore 220.00 Metre 457.80 100,716.00

18.10.5 40 mm dia nominal bore 30.00 Metre 589.20 17,676.00

79 18.17 Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end).

18.17.2 32 mm nominal bore 5.00 Each 589.90 2,950.00

18.17.3 40 mm nominal bore 5.00 Each 707.30 3,537.00

80 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end).

18.19.3 40 mm nominal bore

81 18.49 Providing and fixing 15 mm. dia. C.P. brass bib cock of approved brand and manufacture etc. all complete jobs. 60.00 Each 434.20 26,052.00

82 18.50.1 Providing and fixing 15 mm. dia. C.P. brass long nose bib cock of approved brand and manufacture etc. all complete jobs. 20.00 Each 715.10 14,302.00

83 18.52.1 Providing and fixing 15 mm. dia. C.P. brass stop cock of approved brand and manufacture etc. all complete jobs. 48.00 Each 594.80 28,550.00

84 18.53.1 Providing and fixing 15 mm. dia. C.P. brass angle valve for basin mixer and geyser points of approved brand and manufacture etc. all complete jobs. 20.00 Each 500.40 10,008.00

85 18.21.1 Providing and fixing 20 mm. nominal bore unplasticised PVC connection pipe with brass ions of approved brand and manufacture etc. all complete jobs. 65.00 Each 74.80 4,862.00

86 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 4.00 Each 299.40 1,198.00

87 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 16.00 Each 190.10 3,042.00

88 19.30.1.1 Constructing brick masonry chamber for underground inspection chamber with bricks in C.M. (1:4) 455x61 mm. Inside dimensions 455x610 mm. and 45 cm. deep for single pipe line etc. all complete jobs. 18.00 Each 4266.80 76,802.00

89 18.58 Providing and fixing PTMT grating of approved quality and colour.

18.58.2 Rectangular type with openable circular lid

18.58.2.1 150 mm nominal size square,18 mm high with 100 mm dia of the inner hinged round grating. 44.00 Each 169.70 7,467.00

90 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. 20.00 Each 96.80 1,936.00

91 18.48 Providing and placing on terrace (at all floor levels) polythylene water storage ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000.00 liter 9.70 9,700.00

92 12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

12.78.2 75 mm diameter 60.00 Metre 162.70 9,762.00

93 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

94 (ii) Plain band 0.00 0.00

95 (iii) Single Tee With Door 0.00 0.00

(iv) Shoe 0.00 0.00

96 12.80 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete

97 19.6 Providing, laying non-pressure NP-2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement motor in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.

19.6.2 150 mm diameter R.C.C. pipe 60.00 Metre 410.70 24,642.00

98 NS WATER DRINKING SYSTEM KENT PERK – Chiller-cum-Water Dispenser RO Purifier, Multi Purification Processes, RO + UF + TDS Control, Auto Flushing System, Automatically Operation. 4.00 Each 65000.00 260,000.00

99 19.32.1 Making soak pit 2.5m diameter 3.0 metre deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75 and S.W drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks 2.00 each 33603.40 67,207.00

100 24.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools,plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre depth below ground level.

101 24.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer -in-charge.

102 24.3.2 150 mm nominal size dia 35.00 Per m 660.10 23,104.00

103 24.3.5 75 mm nominal size dia 55.00 Per m 414.40 22,792.00

104 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia 30.00 Per m 673.50 20,205.00

105 24.4.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 50 mm nominal size dia 20.00 Per m 354.90 7,098.00

106 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. 1.20 m3 1188.90 1,427.00

107 24.6 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 1.20 m3 1195.60 1,435.00

108 24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 1.20 m3 1195.60 1,435.00

109 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 12.00 Per hour 916.80 11,002.00

110 24.13 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 0.00 0.00

111 24.14 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.

112 24.15 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).

113 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. 7.41 Per m2 1343.20 9,948.00

114 N.S. Supplying & installation testing and commissioning submersible pump etc as per specification and direction of E/I. 1.00 Each 22873.00 22,873.00

115 Providing and fixing gun metal non- return valve of approved quality (screwed end) :

18.19.1.1 40 mm nominal bore horizental 2.00 Each 815.00 1,630.00

116 16.75 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately). 58.90 m³ 5842.70 344,135.00

117 11.77 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. 104.09 m2 721.10 75,059.00

118 23.10.3 Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days or more tili the grass forms a thick lawn free form weeds and fit for mowing including supplying good earth if needed.In rows 5 cm apart in either direction. 1209.67 per 100 sqm 1027.40 12,428.00

119 13.17.1 Providing 12 mm thick plaster (1:3) with a floating coat of neat cement 10.30 m2 203.60 2,097.00

120 NS Single Metal Bed (Without Mattress) with 8mm Ply on mattress area-| Bed SIZE(IN MM): 1981 X 977 * MATERIAL : METAL. Bed frame made up of mild steel heavy duty. The frame joints are all mig welded and grounded for better finish. The frame to be powder coated. The Product Should be Certified Company BIFMA,ISO- |50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC 101.00 Each 14094.00 1,423,494.00

121 NS Mattress 2" thick (Size75"x36") Supplying and fixing of Mattress (Size75"x36"x2) at site. The Product should be green guard. The Product should be PEFC,FSC,BIFMA,Green Gaurd,AGSI & ISO.14001,18001 Certified. 101.00 Each 4233.60 427,594.00

122 NS SLOTED ANGLE RACK * (L)900MM X (D)450MM X (H)2MTS SLOTTED ANGLE RACKS WITH 7 PANELS ANGLE : 40 X 40 X 2MM PANELS: 20 GAUGE. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 1.00 Each 8713.80 8,714.00

123 NS Library Table-Library Table Size : 2400L x 1200W x 740Ht.25mm thk. Prelam Particle board tabletop with PVC edge banding.Tabletop supported with Powder coated "C" shape metal legs of size 50mm x 50mm and connectors of size 50mm x 50mm. (Table Top PLPB should be in round corner). The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 2.00 Each 27588.60 55,177.00

124 NS Study Table - TABLE TOP IN 18MM THICK PRELAMINATED BOARD WITH UNDERSTRACTURE MADE OF POWDER COATED SINGLE UNIT WITH METAL MESH SHELF FOR BOOKS TABLE SIZE: 700MML X 450MMD X 740MMH. * SCRATCHPROOF EASY WIPE TOP * METAL SHELF & WIRE SHELF WITH BAG HOOK * DURABLE ,STRONG & SAFE. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 100.00 Each 5512.50 551,250.00

125 NS Study Chair - CHAIR SIZE: 355MML X 381MMD X 780MMH. FIBER SEAT* SCRATCHPROOF EASY WIPE TOP SUPPORTED WITH UNDERSTRACTURE MADE OF POWDER COATED. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 115.00 Each 4833.00 555,795.00

126 NS Dining table-Size : 2400L x 1200W x 740Ht.25mm thk. Prelam Particle board tabletop with PVC edge banding.Tabletop supported with Powder coated "C" shape metal legs of size 50mm x 50mm and connectors of size 50mm x 50mm. (Table Top PLPB should be in round corner). The Product should be green guard. The Product should be PEFC,FSC,BIFMA,Green Gaurd,AGSI & ISO.14001,18001 Certified 8.00 Each 20109.60 160,877.00

127 NS Stackable Café Chair : Size: (L)381mm X (D)419mm X (H)839mm Seat and back in PVC Moulded Chair with SS 202 grade frame Round Pipe. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 48.00 Each 4233.60 203,213.00

128 NS Cantiliver Chair - Chair Size (W)595mm X (D)510mm X (H)875mm. Multi-purpose fixed chair,Metal frame,PU Padding on armrest. Cushion upholstery in leatherette with four leg metal legs with matt finish. The Product should be PEFC,FSC,BIFMA,Green Gaurd,AGSI & ISO.14001,18001 Certified. Color-Black. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 5.00 Each 7938.00 39,690.00

129 NS Table with side unit return- Table Size(1500x750x750)mm with 25 mm thk top & Side runner Size(750x450x750)mm with 25 mm thk. Table made of 25 mm thk pre lam particle board with edge banding. Table top supported with 25 mm side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. Color-Wenge.The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC 1.00 Each 32457.60 32,458.00

130 NS High Back Chair Size (Back Height-670xBack Width-470)mm & (Seat Depth-485xSeat Width-475)mm with Min-Max Height (460-540)mm. Nylon base chair with push back mechanism & Fix handle. Nylon base chair with push back mechanism. Back & seat cover cushion chair uphlostered in fabric & adjustable armrest locks any position. Syncro mechenism with locking system and five star chrome base with nylon casters. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive with task chair & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Back reclines at A 2-to-1 ratio to the seat. 5% post consumed recycled content & 30% total recycled content. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. Color-Black 1.00 Each 13141.80 13,142.00

131 NS 3 Seater Chrome Chair Length 1775mm x Depth 690mm x Height 755mm 1)Seat & back single section 2)Seat is 410 mm from ground 3)Perforated mild steel powder coated 4)Seat thickness 1.2 mm 5)Seat width 520 mm 6)Beam MILD steel with black power coating thickness 1.6mm 7) Mild steel border with chrome plating for every seat & back 8) Mild steel handles chrome plated & die pressed legs at the end of chairs 9) Gross weight of regular 3-seater will be 31 kg. 1.00 Each 14976.00 14,976.00

132 I. PIPING & VALVES

7 Providing, laying, testing & commissioning of "C" Class heavy duty MS pipe conforming to IS 1239/3589 i/c fiiitngs like elbows, tees, flanges, tapers, nut bolts, gaskets, etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.

133 14 Providing, fixing, testing & commissioning of non-return valve of following sizes conforming to IS : 5312 complete with rubber gaskets, GI bolts, nuts, washers etc, as required.

11 Providing , fixing, testing & commissioning of butterfly valves of PN 1.6 rating with bronze / gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required, Make : Kartar / Audco / Advance / Sant.

11.5 100 mm dia with lever 2.00 set 6056.00 12,112.00

11.4 80 mm dia. With lever 1.00 set 4588.00 4,588.00

134 II. INTERNAL HYDRANT SYSTEM

135 9.2 Providing and fixing ISI marked SS-304 fire hydrant valve 80 mm inlet with single outlet and fitted with 63 mm dia instantaneous female coupling on the outlet complete including companion flanges, pvc black cap and chain, nuts, bolts and 3 mm thick compressed asbestos gasket at locations as per drawings ( inlet flange as per IS: 5290-1969 Class C ). 3.00 set 5722 17,166.00

136 17.1 Providing and fixing first aid fire hose reel drum wall mounting & swinging type fitted with 20 mm dia 30 m long high pressure hose as per IS : 5132 with 5 mm outlet SS nozzle with shut off valve ( IS: 884-1969). 3.00 set 7920 23,760.00

137 16.2 Providing and fixing 63 mm dia (15 m long) EPDM lined fabric hose including SS-304 male and female instantaneous type coupling approved by fire authority, machine wound with GI wire complete in all respects. Hose shall conform to IS : 636 Type II and coupling to IS: 903 – 1975 with ISI certification. MAKE : OMEX / NEWTECH / SAFEGUARD/EQV. 6.00 set 4445 26,670.00

138 1 (NS ) Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. sheet with double glazed front door and pad locking arrangement, painted Fire Red with stove enameled paint and FIRE HOSE written on front including necessary supports ( to house ONE length of canvas hose with couplings, branch pipe and nozzle). MAKE : OMEX / NEWTECH / SAFEGUARD/EQV. 3.00 Each. 4021 12,063.00

139 18.2 Providing and fixing standard short size SS branch pipe with nozzle 16 mm dia. Outlet with standard instantaneous type 63 mm dia. Coupling as per IS : 903 ( ISI marked. ). MAKE : OMEX / NEWTECH / SAFEGUARD/EQV. 3.00 Each. 1631 4,893.00

140 2 ( NS ) Providing and fixing 25 mm dia brass ball valve full bore type with lever and screwed female ends. ( 20 kg./sq. cm.). ISI MARKED. 3.00 Each. 1722 5,166.00

141 3( NS ) Providing and fixing 25 mm dia gun metal single acting air release valve with screwed inlet tested for 20 kg. / cm². 1.00 Each. 1722 1,722.00

142 5 ( NS ) Providing and fixing dial type pressure gauge with isolation cock and chrome coated copper pipe on main header Dial dia. 150 mm calibration 0-15 kg. / cm². 1.00 Each. 1722 1,722.00

143 19.3 Providing and fixing 150 mm dia Three –Way Fire brigade connection consisting of 63 mm dia instantaneously male coupling and and a check valve protected by cap scored with a chain glass bore etc. ( To be connected to riser ). 1.00 Each. 9071 9,071.00

144 6 ( NS ) Providing and fixing of self illuminated “FIRE EXIT”, etc. signages. 6.00 Each. 1150 6,900.00

145 III FIRE PUMPS & ACCESSORIES

1 SITC of electric driven terrace pump

4.2 Terrace Pump

Type : Split casing

Speed (rpm) : 2965

Capacity : 450 lpm

146 22 Providing and fixing dual type pressure switch suitable for 1-20 Kg/cm2 including electrical connections setting of Cut-In and cut-Off pressure complete in all respects. 2.00 Nos 1442.00 2,884.00

147 1 ( NS ) Providing and fixing heavy duty aluminium armored cables 1.1 KVA grade including necessary support clamps at ceiling

Power cable 3 core 16 Sq. mm 112.00 Meter 397.00 44,464.00

148 IV FIRE EXTINGUISHERS

1 Providing and fixing CO2 extinguisher consisting of seamless MS cylindrical body squeeze lever discharge valve, internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle ISI marked as per IS: 15683 including fixing with dash fasteners etc. complete. MAKE : OMEX / NEWTECH/ SAFEGUARD/ EQV.

a) Capacity 4.5 kg. 8.00 Each. 7500.00 60,000.00

2 Providing and fixing stored pressure Multipurpose fire extinguisher consisting of welded M.S. cylindrical body, squeeze lever discharge valve, 30 cms long high pressure discharge hose ISI marked as per IS:15683 including fixing to wall with brackets etc. complete. MAKE : OMEX / NEWTECH/ SAFEGUARD/ EQV. 0.00 0.00

a) Capacity 6 Kg. 8.00 Each 2200.00 17,600.00

149 V FIRE ALARM & DETECTION SYSTEM. DSR-22 EM

150 17.1.9.1 Supply, installation, testing and commissioning of conventional type Fire Alarm Control Panel 4 Zone capacity with LED display.

152 17.1.2 SITC of Optical type smoke detector complete with base. 35.00 Each. 1153.00 40,355.00

153 17.2.14 SITC of manual call point complete with mounting base. 6.00 Each. 3871.00 23,226.00

154 172.15 Supply and Installation of Wall Mounted Horn cum Strobe Lights with 110 cd. 7.00 Each. 3506.00 24,542.00

155 17.5.2 Supply and laying of 1.5 sq. mm dual core copper wire with 19 mm dia PVC conduit. 920.00 RM 173.00 159,160.00

156 VIII WATER TANKS.

157 18.48 S/F/F Standard make PVC water tank comp job as per direction E/I with relevant PHE works. 10000.00 Ltr 9.70 97,000.00

158 Carriage of materials 289.654

159 Extra Cost Of Materials 289.654

Sub-total(A):- 38,410,320.00

Non Schedule items Sub-total(B):- 4,022,188.00

Schedule items Sub-total( C )=(A)-(B):- 34,388,132.00

Applying Correction Factor 0.982 on Schedule item(SOR) (D) 33,769,146.00

Adding 5.36% extra GST on SOR item(E ) 1,810,026.00

MAINTAINANCE WORK FOR 5 YEAR (Except DLP) items 1,227,118.00

Total of Civil works(G):- 40,828,478.00

Electrical works

Sl. No. Code No. Particular Qty. Unit Rate Amount

160 1.3 Wiring for light point/ fan point/ exhaust fan point/ Call bell Point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch, modular Plate, suitable size G.I box etc. as required.

Batten holder point 102

Tube light point 162

Downlighter point 59

Ceiling fan point 120

Exhaust fan point 30

161 1.31 Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 71 Each 414.00 29,394.00

162 1.32 Supplying and fixing suitable size of G.I. box with modular plate and cover in front or in surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 16 Each 531.00 8,496.00

163 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 192 Meter. 309.00 59,328.00

164 1.55 Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 2 nos. 5 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as reqd. 121 Each 632.00 76,472.00

165 1.7 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(For ckt.) 1182 Meter 201.00 237,582.00

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire(For 2 X 5 A Socket & St. light on building) 1596 Meter 246.00 392,616.00

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 40 Meter 422.00 16,880.00

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire 300 Meter 660.00 198,000.00

1.7.13 4 X 16 sq. mm + 1 X 6 sq. mm earth wire 80 Meter 1,312.00 104,960.00

166 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar, din bar inerconnections, powder painted including earthing etc. as reqd.(But without MCB/RCCB/Isolator)

2.8.6 8 ways, Double door (for common Light on each floor) 3 Each 2,591.00 7,773.00

167 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar, din bar, inerconnections, powder painted including earthing etc. as reqd.(But without MCB/RCCB/Isolator)

2.9.1 4 ways (4+12), Double door, horizontal type 19 Each 4,184.00 79,496.00

168 2.12 Supplying and fixing following rating, 240/415 volts, ‘C’ curve, MCB suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.1 6 A to 32 A, Single pole 246 Each 237.00 58,302.00

169 2.13 Supplying and fixing following rating, 240/415 volts, ‘C’ curve, MCB suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.13.3 40 A, Double pole 8 Each 1,198.00 9,584.00

171 2.33 Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBs)

2.33.1 4 ways , Double door, I/C 160 A, MCCB 1 Each 12,107.00 12,107.00

2.33.2 6 way, Double door, I/C 160A, MCCB 3 Each 13,710.00 41,130.00

172 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thrmomagnetic release and terminal spreaders in existing panel board including drilling holes in cubicle panel, making connections etc. as required.

173 2.12 Supplying and fixing following rating, 240/415 volts, ‘C’ curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

174 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing panel board including drilling holes in cubicle panel, making connections etc. as required.

175 2.7 Providing and fixing following capacity 4 pole ON-load panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.

176 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 24 Sq. ft. 1,809.00 43,416.00

177 A/R Supplying of copper strip of all sizes for busbar strip/interconnection including drilling holes etc as reqd. 10 Kg 871.00 8,710.00

178 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 1 Each 6,536.00 6,536.00

179 7.7 Supply of following sizes and core PVC / XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

180 7.1 Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

7.1.3 Above 95 sq. mm and upto 185 sq. mm 60 Meter 336.00 20,160.00

181 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

FITTING & FIXTURES

182 1.33 Supplying and fixing 2 pin, 5/6 amp. ceiling rose on the existing junction box/ wooden block including connection etc as required. 312 Each 64.00 19,968.00

183 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. 102 Each 80.00 8,160.00

184 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

6.1.6 15 watt LED lamp 102 Each 250.00 25,500.00

185 5.1 Supplying and fixing 4' X 18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 162 Each 521.00 84,402.00

186 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

187 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

188 8.5 Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. 12 Each 1,038.00 12,456.00

189 1.25 Supplying and fixing two module stepped type electronic Fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 120 Each 358.00 42,960.00

190 DSR/19.1 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling Fan with BLDC motor, class of nsulation: B, 3 nos blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CM/MM) minimum 6.00, Air delivery minimum 210 cum/min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, earthing etc. complete as required. Make:- Bajaj/Crompton/ Orient/Usha. 120 Each 2,695.00 323,400.00

191 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

192 3.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 2 Set 13,721.00 27,442.00

193 3.17 Providing & fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 20 Meter 144.00 2,880.00

LIGHTNING ARRESTER

194 4.1 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 6 Each 1056.00 6,336.00

195 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 20 Metre 81.00 1,620.00

196 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 140 Metre 102.00 14,280.00

197 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 40 Metre 145.00 5,800.00

198 3.2 Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. With charcoal and salt as required. ( for Lightning arrester) 4 Set 6323.00 25,292.00

199 3.15 Providing and fixing 25 mmX 5 mm G.I. strip on surface or in recess for connections etc as required. 20 Metre 195.00 3,900.00

FOR CAMPUS LIGHT

200 8.22 Supply and erection of 6 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation)

201 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

202 9.16 Providing and making of following sizes octagonal street light pole foundation in reinforcement cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) of specified size including PVC conduit, form work, curing, reinforcement,excavatio and refilling etc. as required.

9.16.2 For 6/7 meter pole(500mm X 500mm X 1400mm) 12 Each 4,398.00 52,776.00

203 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as reqd.

204 7.7 Supply of following sizes and core PVC / XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

205 7.1 Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

206 3.18 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 250 Each 31.00 7,750.00

207 3.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 2 Set 6,884.00 13,768.00

208 3.16 Providing & fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing etc. as required. 20 Meter 53.00 1,060.00

TOTAL Rs 3,612,771.00

FOR SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM

209 DSR Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specification as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- (a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, Conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2, Solar Photovoltaic Module conversion efficiency shall not be less than 16.5% PV modules used in solar power plants/systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. (b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. (c) Data Monitoring System complete with accessories. (d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. (e) Lightning and surge voltage protection. (f) Connections and interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kv grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required. 12 KWp 54280 651,360.00

Total Rs 651,360.00

FOR FIRE ALARM & DETECTION SYSTEM

210 DSR 17.1.9 Supply, Installation, Testing and Commissioning of sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.

211 DSR 17.1.2 Supply, Installation, Testing and Commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. 80 Each 1,223.00 97,840.00

212 DSR 17.1.4 Supply, Installation, Testing and Commissioning of manual call boxes of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. 3 Each 444.00 1,332.00

213 DSR 17.1.7 Supply, Installation, Testing and Commissioning fire alarm sounder facility to make announcement, mounted in ABS box with hinged plate & suitable for operation with amplifier i/c line matching transformeretc. complete as required. 3 Each 530.00 1,590.00

214 DSR 17.5.1 Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. 800 Meter 359.00 287,200.00

Total 397,770.00

Add. GST @ 5.36% as per BCD letter no.:- 5751 Dated:- 18/07/2023. (+) Rs. 21,320.47

TOTAL PART'A':- 4,683,221.40

PART 'B':-NON SCHEDULE ITEM

215 NS SITC of 2MP IR Bullet Fixed Camera - 1/2.8" Progressive scan CMOS, 1920 X 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F 1.2, 0 Lux with IR, ICR, ONVIF (PROFILES), support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reductio, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67 Edge Anlaytics- Line crossing detection, Intrusion delection, Video tamering, UL, CE, FCC certified. (DS-2CD3021G0-I (2.8mm) 8 Nos 5,250.00 42,000.00

216 NS SITC of 2MP IR Indoor Dome Fixed Camera - 1/2.8" Progressive scan CMOS, 1920 X 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F 1.2, 0 Lux with IR, ICR, ONVIF , support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reductio, Triple individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, IK10, Edge Anlaytics- Line crossing detection, Intrusion delection, Motion detection, Video tamering, UL, CE, FCC certified. (DS-2CD3121G0-I (2.8mm) 8 Nos 5,150.00 41,200.00

217 NS SITC of 2MP IR Outdoor PTZ Camera - 1/2.8" Progressive Scam CMOS, 1920 X 1080 at 60fps, 4.8 mm to 153 mm, 32XOptical, 16X ditital zoom, color: 0.005 Lux at F1.6, B/W: 0.001 Lux at F1.6, ICR, ONVIF, support H.265, MJPEG, 120 db WDR, 3D Digital Noise Reduction, HLC, BLC, Defog, EIS, Tripple individually configurable stream, 24 VAC & Hi PoE, IR range: 150m, Pan: 360˚ endless, Tilt: From - 15˚ to 90˚ (auto-flip), Pan Speed - from 0.1˚/s to 160˚/s, Preset Speed: 240˚/s, Tilt Speed - from 0.1˚/s to 120˚/s, Preset Speed: 200˚/s, Presets- 300, Alarm Input-2-ch alarm input, Alarm Output-1-ch alarm Output, Audio-1 channel input & output, Support on-board storage up to 256 GB (SD card not included), IP66, IK10, Face Detection, Region Entrance Detection, Line Crossing Detection, Region Entrance Detection, Region Exiting Detection, UL, CE, FCC certified. (HI-PoE Injector under Si Scope, if PoE is used)(Model no DS-2DE7232IW-AE (Camera) + DS-1602ZJ (wall mount Bracket) or DS-1602ZJ-pole (Vertical Pole Mounting Bracket)) 1 Nos 64,200.00 64,200.00

218 NS SITC of Surveillance class Common Micro SD Card 128 GB for camera. (ANR-Automatic Network Replenishment) 17 Nos 1,760.00 29,920.00

219 NS SITC of 64ch Network Video Recorder- Connect UP to 64 IP cameras, Dual OS, Up to 12 Megapixels Resolution, Two independent HDMI outpuls, one HDMI output of 4k resolution, 1 VGA outut with outut upto 1920 X 1080, Support H.265, MJPEG, Supports N+1 hot spares system, supports RAIDO, RAID 1, RAID5, RAID6 and RAID 10, Supports HDD hot swap, Supports Dual Power-Redundanl, Incoming Bandwilh 320 Mbps, 8 SATA Hard Disks, ANR Technology,, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 6 TB. 3 X USB at least 1 X USB with 3.0 Alarm I/O 16/4, RS-485, RS-232, 2 RJ-45 10/100/1000 Mbps self-adaptive Ethernet Interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified. (DS-7764NI-I8) 1 Nos 48,876.00 48,876.00

220 NS SITC of 6 TB Surveillance Hard Disk (ST 6000VX0023) 2 Nos 14,850.00 29,700.00

221 NS SITC of 16 port Unmanaged Network PoE Switch: 24 port PoE Switch with PoE standard of IEEE 802.3af, IEEE 802.3at, PoE port, Uplink ports (DS-3 e0326P-E) 1 Nos 10,450.00 10,450.00

222 NS SITC of 24 port Unmanaged Network PoE Switch: 24 port PoE Switch with PoE standard of IEEE 802.3af, IEEE 802.3at, PoE port, Uplink ports (DS-3 e0326P-E) 1 Nos 20,735.00 20,735.00

223 NS SITC of 8 port Managed Network PoE Switch: 1 Nos 5,451.00 5,451.00

224 NS SITC of 32" LED 24X7 Survelliance Monitor (Make- Sony/Samsung) 1 Nos 31,500.00 31,500.00

225 NS SITC of Cat-6 Cable: UTP CAT 6, 305 meter, Core diameter: 0.53mm, OFC, CM, White 700 Mtrs 52.00 36,400.00

TOTAL PART 'B':- 360,432.00

Total Rs(H). 5,043,653.00

Total Of Civil Work(G) :- 40,828,478.00

Total Of Electrical Work(H) : - 5,043,653.00

Civil Work + Electrical Work :- 45,872,131.00

Executive Engineer

Building Division, Jamui

BOQ for Construction Of 100 Bedded State welfare Boy's Hostel at chakai, JAMUI (BIHAR)

BOQ Amount:- 40,828,478.00 Time of completion:- 09 Months

Earnest money:- 817000.00 Cost of BOQ:- AS per e-proc2

Sl. No. SOR-22 Item Of work M Blng PHE Septic Boring Campus RWH B/W Furnit. Fire Qty. Unit Rate Amount

1 2.32 Clearing jungle including uprooting of rank vegetation ,grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 1709.05 1709.05 100 m2 697.40 11,919.00

2 2.6.1 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m inwidth as well es 10 sqm on plan) including disposal of excavated earth , leadupto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatlydressed. 641.93 641.93 m³ 314.90 202,144.00

2 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil. 56.259 17.84 207.9 282.00 m³ 360.70 101,717.00

2.25A Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead 197.12 197.12 m³ 411.70 81,154.00

3 2.27.1 Extra for every additional lift of 1.5 m or part thereof in all kind of soil etc. all complete jobs. 160.48 51.98 212.46 m³ 49.40 10,496.00

4 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 346.34 4.019 547.54 1.66 15.59 915.15 m³ 287.30 262,922.00

5 Derived Providing designation 100A fly ash brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l. 662.54 26.79 386.67 17.5 147.5 1241.00 m² 290.04 359,940.00

6 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 57.94 4.019 7.8 69.76 m³ 3998.10 278,903.00

4.1.5 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:3:6(1 Cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) 1.86 1.86 m³ 3434.00 6,387.00

5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size 0.74 0.74 m³ 4688.30 3,469.00

7 5.33.1.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-25 grde reinforcd cement concrete. 184.83 3.349 63.95 252.13 m³ 5063.40 1,276,630.00

8 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 320.97 143.31 464.28 m³ 123.90 57,524.00

9 5.33.2.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-25 grde reinforcd cement concrete. 473.78 25.74 499.52 m³ 5863.20 2,928,786.00

5.33.2.2 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-30 grde reinforcd cement concrete. 0.00 m³ 5989.00 0.00

10 5.9 Centring and shuttering including strutting,propping etc. and removal of form for. 0.00

A 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. 216.74 53.58 26.03 3.04 95.77 395.16 m² 211.60 83,616.00

B 5.9.3 Suspended floors, roots, landings, balcnies and access platform. 874.69 874.69 m2 437.50 382,677.00

C 5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers. 1207.78 231.63 1439.41 m² 404.70 582,529.00

D 5.9.6 Columns,Pillars,Piers,Abutments, Posts and Struts 926.75 385.02 1311.77 m² 494.40 648,539.00

E 5.9.7 Stairs,(excluding landings) except spiral-staircaces. 51.92 51.92 m² 439.90 22,840.00

F 5.9.16.1 Edges of slabs and breaks in floors and walis- Under 20 cms wide 463.23 463.23 m 130.20 60,313.00

G 5.9.19 Weather shade,Chajjas, corbels etc. including edges 84.43 84.43 m² 550.90 46,512.00 #REF!

11 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. 0.00 0.00

12 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in Cement mortar 1:6 (1 cement: 6 coarse sand )foundations and plinth in etc. 376.24 14.715 5.64 27.42 424.02 m³ 4923.00 2,087,426.00

13 6.1.12C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : in superstructure above plinth and upto floor V level. 40.39 40.39 m³ 5116.30 206,647.00

14 6.3C Extra tor Brick work in superstructure above plinth level upto floor V cum 397.90 27.42 425.32 m³ 842.20 358,205.00

15 13.24.2 Providing 6 mm cement plaster to ceiling of mix 1:4(1 cement: 4 coarse sand) etc. complete. 2264.36 2264.36 m² 125.60 284,404.00

16 13.11.4 Providing 12 mm cement plaster of mix 1:6(1 cement: 6 coarse sand) etc. allc omplete. 3195.99 124.3 738.33 4058.62 m² 141.50 574,295.00

17 13.12.2 Providing 15 mm cement plaster on rough side of single or half brick wall of mix 1:4(1 cement: 4 coarse sand) etc. all complete. 1954.96 588.7 2543.66 m² 176.40 448,702.00

18 13.26 Neat cement punning over plaster surface etc. 67.15 124.3 191.45 m² 40.50 7,754.00

19 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth 77.56 77.56 m² 436.60 33,863.00

20 Derived Providing250mmwide fly ash brick drain incementmortar (1:6) withav. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation100-Aflatsolinginpropergradeandslopeat thebase.the drain duly.plasteredinCM.(1:3)withpunningoverexposedsurfaceall complete as per building specification and direction of E/l, 103.42 103.42 m 1097.49 113,502.00

21 10.15.2.1 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile C 295.17 295.17 m 432.60 127,691.00

22 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions. Powder coated 283.87 283.87 kg 418.40 118,771.00

23 21.1.2.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately):Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 1349.80 1349.80 Kg 480.20 648,174.00

24 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 152.33 152.33 kg 809.30 123,281.00

25 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 0.00 0.00

(i) 9.48.1 Fixed to steel windows by welding 2150.51 1623.46 3773.97 Kg 144.50 545,339.00

(ii) 9.48.2 Fixed to openings/ wooden frames with rawl plugs screws etc 0.00 KG 161.10 0.00

26 9.135.2 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.50 mm all complete With 12 mm mild steel U beading 0.00 m² 879.20 0.00

27 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. 0.00 m² 6303.40 0.00

28 10.18 Providing and fixing M.S.fan Box type I or II of 16 mm dia.M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop,all as per standard design complete. 100.00 100.00 Nos. 165.40 16,540.00

29 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 687.60 687.60 KG 546.80 375,980.00

30 11.26 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand) 503.35 503.35 m² 1252.70 630,547.00

31 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.Size of Tile 60x60 cm 892.66 892.66 m² 1638.80 1,462,891.00

32 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 39.87 39.87 m² 1334.90 53,222.00

33 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600 x 600 mm. 57.31 57.31 m² 1191.80 68,302.00

34 11.31 Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab. 361.20 361.20 m 82.90 29,943.00

35 11.32 Extra for Kota stone / sand stone in treads of steps and risers using single up to 1.05 metre.length 71.38 71.38 m² 18.10 1,292.00

36 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. 197.47 197.47 m² 686.80 135,622.00

37 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 709.32 709.32 m² 795.00 563,909.00

38 8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 15.46 15.46 m² 4242.90 65,595.00

8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 29.88 29.88 m² 4401.20 131,508.00

39 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions. (ii) 2nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand)mixed with water proofing compound in recommended proportion, (iii) 3rd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) 4th course of 400 micron thick PVC sheet.(Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni). 77.84 77.84 m2 480.60 37,410.00

40 22.8.1 Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs, balconies , terraces etc, consisting of following operations. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water -proofing compound cleaning the surface before treatment, (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50 % of cement mortar 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water froofing compound conforming to IS 2545 to reuired slope and treating similary the adjoining walls upto 300 mm height including rounding of junctions, or walls ad slabs. (c) After two days of proper curing applying a secoung coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test, All above operations to be done in order and as directed and specifed by the Engineer-in-Charge. 388.85 388.85 m2 850.70 330,795.00

41 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete 10.00 10.00 Nos. 189.4 1,894.00

42 13.116 Forming groove of uniform size in the top layer of washed stone grit piaster as per approved pattern using wooden batten nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charges. 450.00 1351.92 1801.92 m 47.10 84,870.00

43 9.6.3 Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, all complete as per directions of Engineer-in- Charge and panelling with panels of: 93.68 93.68 m² 2894.90 271,194.00

9.130.1 Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked,exterior grade (Grade I), of approved make including IInd class teak wood lipping of 25 mm wide x 12mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. 326.50 326.50 m² 1432.00 467,548.00

21.13 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 100.00 100.00 No 365.20 36,520.00

9.165.1 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm 100.00 100.00 No 103.40 10,340.00

9.97.3 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ), transparent or dyed torequired colour or shade, with necessary screws etc. complete:200 x 10 mm 100.00 100.00 No 71.60 7,160.00

9.59.1 Providing and fixing ISI marked oxidised M.S. single acting spring hingeswith necessary screws etc.complete: 100.00 100.00 No 169.10 16,910.00

#REF! 26.87.1 Providing and fixing factory made single extruded WPC {Wood Polymer Composite} solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers {wood powder/ rice husk/wheat husk) and non toxic additives {maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N {Face) & 900N (Edge), minimum compressive strength 50 N/mm, modulus of elasticity 850 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In• Charge. {Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)30 mm thick 0.00 m² 3866.50 0.00

#REF! Providing and fixing aluminium door Fittings, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 0.00 0.00

9.96 Sliding Door Bolt 0.00 0.00

9.97 Sliding Tower Bolt 0.00 0.00

9.101.1 hanging floor door stopper 0.00 0.00

Twin rubber stopper 40.00 40.00 Nos. 60.80 2,432.00

#REF! 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 7415.30 7415.30 m² 105.40 781,573.00

#REF! 13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade 5460.35 5460.35 m² 102.30 558,594.00

13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 1954.96 1327.03 3281.99 m² 137.00 449,633.00

#REF! 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: 253.00 122.06 375.06 m² 84.50 31,693.00

#REF! 9.150 Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete. 164.00 164.00 no 160.800 26,371.00

#REF! 9.151 Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete 328.00 328.00 no 88.60 29,061.00

#REF! 9.148 Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows,of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-incharge. 32.00 32.00 no 299.00 9,568.00

#REF! 9.60.1 Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 4.00 4.00 no 250.90 1,004.00

#REF! 16.90 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622, of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge 6.48 6.48 sqm 1464.30 9,489.00

#REF! NS Signages 0.00 0.00

17.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: 0.00 0.00

17.1.1 White Vitreous china Orissa pattern W.C pan of size 580x440mm with integral type foot rests. 10.00 10.00 Each 4470.90 44,709.00

17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 0.00

17.2.1 W.C pan with ISI marked white solid plastic seat and lid 8.00 8.00 Each 4230.00 33,840.00

17.7 Providing and fixing wash basin with C.I brackets, 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 0.00 0.00

17.7.8 White Vitreous China Flat back wash basin size 550x400mm with single 15mm C.P brass pillar tap. 15.00 15.00 Each 3694.30 55,415.00

17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required: 0.00

17.10.2 Kitchen sink without drain board 0.00

17.28 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. 0.00

17.28.2 Flexible pipe 0.00

17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 12.00 12.00 Each 3723.20 44,678.00

17.32.2 Providing and fixing mirror of superior glass and of required shape and size with plastic molded frame of rectangular shape 453x357 mm. including all cost of labour, materials, taxes, etc. all complete. 15.00 15.00 Each 857.00 12,855.00

17.33 Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc. complete. 15.00 15.00 Each 713.30 10,700.00

17.73.1 Providing and fixing PTMT towerl rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 15.00 15.00 Each 397.30 5,960.00

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 0.00 0.00

18.8.2 20 mm dia nominal bore 250.00 250.00 Metre 350.80 87,700.00

18.8.3 25 mm dia nominal bore 220.00 26 246.00 Metre 463.10 113,923.00

18.8.4 32 mm dia nominal bore 47 47.00 Metre 549.80 25,841.00

18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including, cutting and making good the walls etc. 0.00 0.00

18.10.4 32 mm dia nominal bore 220.00 220.00 Metre 457.80 100,716.00

18.10.5 40 mm dia nominal bore 30.00 30.00 Metre 589.20 17,676.00

18.17 Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end). 0.00 0.00

18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end). 0.00 0.00

18.19.3 40 mm nominal bore 0.00 0.00

18.49 Providing and fixing 15 mm. dia. C.P. brass bib cock of approved brand and manufacture etc. all complete jobs. 60.00 60.00 Each 434.20 26,052.00

18.50.1 Providing and fixing 15 mm. dia. C.P. brass long nose bib cock of approved brand and manufacture etc. all complete jobs. 20.00 20.00 Each 715.10 14,302.00

18.52.1 Providing and fixing 15 mm. dia. C.P. brass stop cock of approved brand and manufacture etc. all complete jobs. 46.00 2 48.00 Each 594.80 28,550.00

18.53.1 Providing and fixing 15 mm. dia. C.P. brass angle valve for basin mixer and geyser points of approved brand and manufacture etc. all complete jobs. 20.00 20.00 Each 500.40 10,008.00

18.21.1 Providing and fixing 20 mm. nominal bore unplasticised PVC connection pipe with brass ions of approved brand and manufacture etc. all complete jobs. 65.00 65.00 Each 74.80 4,862.00

17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 4.00 4.00 Each 299.40 1,198.00

18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 16.00 16.00 Each 190.10 3,042.00

19.30.1.1 Constructing brick masonry chamber for underground inspection chamber with bricks in C.M. (1:4) 455x61 mm. Inside dimensions 455x610 mm. and 45 cm. deep for single pipe line etc. all complete jobs. 10.00 8 18.00 Each 4266.80 76,802.00

18.58 Providing and fixing PTMT grating of approved quality and colour. 0.00

18.58.2 Rectangular type with openable circular lid 0.00

18.58.2.1 150 mm nominal size square,18 mm high with 100 mm dia of the inner hinged round grating. 44.00 44.00 Each 169.70 7,467.00

18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. 20.00 20.00 Each 96.80 1,936.00

18.48 Providing and placing on terrace (at all floor levels) polythylene water storage ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000.00 1000.00 liter 9.70 9,700.00

12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0.00 0.00

12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0.00 0.00

(i) Coupler 0.00 0.00

(ii) Plain band 0.00 0.00

(iii) Single Tee With Door 0.00 0.00

(iv) Shoe 0.00 0.00

12.80 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete 0.00 0.00

19.6 Providing, laying non-pressure NP-2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement motor in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 0.00 0.00

19.6.2 150 mm diameter R.C.C. pipe 60.00 60.00 Metre 410.70 24,642.00

NS WATER DRINKING SYSTEM KENT PERK – Chiller-cum-Water Dispenser RO Purifier, Multi Purification Processes, RO + UF + TDS Control, Auto Flushing System, Automatically Operation. 4.00 4.00 Each 65000.00 260,000.00

19.32.1 Making soak pit 2.5m diameter 3.0 metre deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75 and S.W drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks 2 2.00 each 33603.40 67,207.00

24.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools,plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre depth below ground level. 0.00 0.00

24.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer -in-charge. 0.00 0.00

24.3.2 150 mm nominal size dia 35.00 35.00 Per m 660.10 23,104.00

24.3.5 75 mm nominal size dia 55.00 55.00 Per m 414.40 22,792.00

24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia 30.00 30.00 Per m 673.50 20,205.00

24.4.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 50 mm nominal size dia 20.00 20.00 Per m 354.90 7,098.00

24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. 1.20 1.20 m3 1188.90 1,427.00

24.6 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 1.20 1.20 m3 1195.60 1,435.00

24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 1.20 1.20 m3 1195.60 1,435.00

24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 12.00 12.00 Per hour 916.80 11,002.00

24.13 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 0.00 0.00

24.14 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 0.00 0.00

24.15 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 0.00 0.00

24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. 7.406 7.41 Per m2 1343.20 9,948.00

N.S. Supplying & installation testing and commissioning submersible pump etc as per specification and direction of E/I. 1.00 1.00 Each 22873.00 22,873.00

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 0.00 0.00

18.19.1.1 40 mm nominal bore horizental 2.00 2.00 Each 815.00 1,630.00

16.75 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately). 58.90 58.90 m³ 5842.70 344,135.00

11.77 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. 104.09 104.09 m2 721.10 75,059.00

23.10.3 Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days or more tili the grass forms a thick lawn free form weeds and fit for mowing including supplying good earth if needed.In rows 5 cm apart in either direction. 1209.67 1209.67 per 100 sqm 1027.40 12,428.00

13.17.1 Providing 12 mm thick plaster (1:3) with a floating coat of neat cement 10.3 10.30 m2 203.60 2,097.00

NS Single Metal Bed (Without Mattress) with 8mm Ply on mattress area-| Bed SIZE(IN MM): 1981 X 977 * MATERIAL : METAL. Bed frame made up of mild steel heavy duty. The frame joints are all mig welded and grounded for better finish. The frame to be powder coated. The Product Should be Certified Company BIFMA,ISO- |50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC 101 101.00 Each 14094.00 1,423,494.00

NS Mattress 2" thick (Size75"x36") Supplying and fixing of Mattress (Size75"x36"x2) at site. The Product should be green guard. The Product should be PEFC,FSC,BIFMA,Green Gaurd,AGSI & ISO.14001,18001 Certified. 101 101.00 Each 4233.60 427,594.00

NS SLOTED ANGLE RACK * (L)900MM X (D)450MM X (H)2MTS SLOTTED ANGLE RACKS WITH 7 PANELS ANGLE : 40 X 40 X 2MM PANELS: 20 GAUGE. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 1 1.00 Each 8713.80 8,714.00

NS Library Table-Library Table Size : 2400L x 1200W x 740Ht.25mm thk. Prelam Particle board tabletop with PVC edge banding.Tabletop supported with Powder coated "C" shape metal legs of size 50mm x 50mm and connectors of size 50mm x 50mm. (Table Top PLPB should be in round corner). The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 2 2.00 Each 27588.60 55,177.00

NS Study Table - TABLE TOP IN 18MM THICK PRELAMINATED BOARD WITH UNDERSTRACTURE MADE OF POWDER COATED SINGLE UNIT WITH METAL MESH SHELF FOR BOOKS TABLE SIZE: 700MML X 450MMD X 740MMH. * SCRATCHPROOF EASY WIPE TOP * METAL SHELF & WIRE SHELF WITH BAG HOOK * DURABLE ,STRONG & SAFE. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 100 100.00 Each 5512.50 551,250.00

NS Study Chair - CHAIR SIZE: 355MML X 381MMD X 780MMH. FIBER SEAT* SCRATCHPROOF EASY WIPE TOP SUPPORTED WITH UNDERSTRACTURE MADE OF POWDER COATED. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 115 115.00 Each 4833.00 555,795.00

NS Dining table-Size : 2400L x 1200W x 740Ht.25mm thk. Prelam Particle board tabletop with PVC edge banding.Tabletop supported with Powder coated "C" shape metal legs of size 50mm x 50mm and connectors of size 50mm x 50mm. (Table Top PLPB should be in round corner). The Product should be green guard. The Product should be PEFC,FSC,BIFMA,Green Gaurd,AGSI & ISO.14001,18001 Certified 8 8.00 Each 20109.60 160,877.00

NS Stackable Café Chair : Size: (L)381mm X (D)419mm X (H)839mm Seat and back in PVC Moulded Chair with SS 202 grade frame Round Pipe. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 48 48.00 Each 4233.60 203,213.00

NS Cantiliver Chair - Chair Size (W)595mm X (D)510mm X (H)875mm. Multi-purpose fixed chair,Metal frame,PU Padding on armrest. Cushion upholstery in leatherette with four leg metal legs with matt finish. The Product should be PEFC,FSC,BIFMA,Green Gaurd,AGSI & ISO.14001,18001 Certified. Color-Black. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 5 5.00 Each 7938.00 39,690.00

NS Table with side unit return- Table Size(1500x750x750)mm with 25 mm thk top & Side runner Size(750x450x750)mm with 25 mm thk. Table made of 25 mm thk pre lam particle board with edge banding. Table top supported with 25 mm side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. Color-Wenge.The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC 1 1.00 Each 32457.60 32,458.00

NS High Back Chair Size (Back Height-670xBack Width-470)mm & (Seat Depth-485xSeat Width-475)mm with Min-Max Height (460-540)mm. Nylon base chair with push back mechanism & Fix handle. Nylon base chair with push back mechanism. Back & seat cover cushion chair uphlostered in fabric & adjustable armrest locks any position. Syncro mechenism with locking system and five star chrome base with nylon casters. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive with task chair & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Back reclines at A 2-to-1 ratio to the seat. 5% post consumed recycled content & 30% total recycled content. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. Color-Black 1 1.00 Each 13141.80 13,142.00

NS 3 Seater Chrome Chair Length 1775mm x Depth 690mm x Height 755mm 1)Seat & back single section 2)Seat is 410 mm from ground 3)Perforated mild steel powder coated 4)Seat thickness 1.2 mm 5)Seat width 520 mm 6)Beam MILD steel with black power coating thickness 1.6mm 7) Mild steel border with chrome plating for every seat & back 8) Mild steel handles chrome plated & die pressed legs at the end of chairs 9) Gross weight of regular 3-seater will be 31 kg. 1 1.00 Each 14976.00 14,976.00

I. PIPING & VALVES 0.00 0.00

7 Providing, laying, testing & commissioning of "C" Class heavy duty MS pipe conforming to IS 1239/3589 i/c fiiitngs like elbows, tees, flanges, tapers, nut bolts, gaskets, etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 0.00 0.00

14 Providing, fixing, testing & commissioning of non-return valve of following sizes conforming to IS : 5312 complete with rubber gaskets, GI bolts, nuts, washers etc, as required. 0.00

11 Providing , fixing, testing & commissioning of butterfly valves of PN 1.6 rating with bronze / gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required, Make : Kartar / Audco / Advance / Sant. 0.00 0.00

11.5 100 mm dia with lever 2 2.00 set 6056.00 12,112.00

11.4 80 mm dia. With lever 1 1.00 set 4588.00 4,588.00

II. INTERNAL HYDRANT SYSTEM 0.00 0.00

9.2 Providing and fixing ISI marked SS-304 fire hydrant valve 80 mm inlet with single outlet and fitted with 63 mm dia instantaneous female coupling on the outlet complete including companion flanges, pvc black cap and chain, nuts, bolts and 3 mm thick compressed asbestos gasket at locations as per drawings ( inlet flange as per IS: 5290-1969 Class C ). 3 3.00 set 5722 17,166.00

17.1 Providing and fixing first aid fire hose reel drum wall mounting & swinging type fitted with 20 mm dia 30 m long high pressure hose as per IS : 5132 with 5 mm outlet SS nozzle with shut off valve ( IS: 884-1969). 3 3.00 set 7920 23,760.00

16.2 Providing and fixing 63 mm dia (15 m long) EPDM lined fabric hose including SS-304 male and female instantaneous type coupling approved by fire authority, machine wound with GI wire complete in all respects. Hose shall conform to IS : 636 Type II and coupling to IS: 903 – 1975 with ISI certification. MAKE : OMEX / NEWTECH / SAFEGUARD/EQV. 6 6.00 set 4445 26,670.00

1 (NS ) Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. sheet with double glazed front door and pad locking arrangement, painted Fire Red with stove enameled paint and FIRE HOSE written on front including necessary supports ( to house ONE length of canvas hose with couplings, branch pipe and nozzle). MAKE : OMEX / NEWTECH / SAFEGUARD/EQV. 3 3.00 Each. 4021 12,063.00

18.2 Providing and fixing standard short size SS branch pipe with nozzle 16 mm dia. Outlet with standard instantaneous type 63 mm dia. Coupling as per IS : 903 ( ISI marked. ). MAKE : OMEX / NEWTECH / SAFEGUARD/EQV. 3 3.00 Each. 1631 4,893.00

2 ( NS ) Providing and fixing 25 mm dia brass ball valve full bore type with lever and screwed female ends. ( 20 kg./sq. cm.). ISI MARKED. 3 3.00 Each. 1722 5,166.00

3( NS ) Providing and fixing 25 mm dia gun metal single acting air release valve with screwed inlet tested for 20 kg. / cm². 1 1.00 Each. 1722 1,722.00

5 ( NS ) Providing and fixing dial type pressure gauge with isolation cock and chrome coated copper pipe on main header Dial dia. 150 mm calibration 0-15 kg. / cm². 1 1.00 Each. 1722 1,722.00

19.3 Providing and fixing 150 mm dia Three –Way Fire brigade connection consisting of 63 mm dia instantaneously male coupling and and a check valve protected by cap scored with a chain glass bore etc. ( To be connected to riser ). 1 1.00 Each. 9071 9,071.00

6 ( NS ) Providing and fixing of self illuminated “FIRE EXIT”, etc. signages. 6 6.00 Each. 1150 6,900.00

III FIRE PUMPS & ACCESSORIES 0.00 0.00

1 SITC of electric driven terrace pump 0.00 0.00

4.2 Terrace Pump 0.00 0.00

Type : Split casing 0.00 0.00

Capacity : 450 lpm 0.00 0.00

22 Providing and fixing dual type pressure switch suitable for 1-20 Kg/cm2 including electrical connections setting of Cut-In and cut-Off pressure complete in all respects. 2 2.00 Nos 1442.00 2,884.00

1 ( NS ) Providing and fixing heavy duty aluminium armored cables 1.1 KVA grade including necessary support clamps at ceiling 0.00 0.00

Power cable 3 core 16 Sq. mm 112 112.00 Meter 397.00 44,464.00

IV FIRE EXTINGUISHERS 0.00 0.00

1 Providing and fixing CO2 extinguisher consisting of seamless MS cylindrical body squeeze lever discharge valve, internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle ISI marked as per IS: 15683 including fixing with dash fasteners etc. complete. MAKE : OMEX / NEWTECH/ SAFEGUARD/ EQV. 0.00 0.00

a) Capacity 4.5 kg. 8 8.00 Each. 7500.00 60,000.00

2 Providing and fixing stored pressure Multipurpose fire extinguisher consisting of welded M.S. cylindrical body, squeeze lever discharge valve, 30 cms long high pressure discharge hose ISI marked as per IS:15683 including fixing to wall with brackets etc. complete. MAKE : OMEX / NEWTECH/ SAFEGUARD/ EQV. 0.00 0.00

a) Capacity 6 Kg. 8 8.00 Each 2200.00 17,600.00

V FIRE ALARM & DETECTION SYSTEM. DSR-22 EM 0.00 0.00

.17.1.9.1 Supply, installation, testing and commissioning of conventional type Fire Alarm Control Panel 4 Zone capacity with LED display. 0.00 0.00

.17.1.2 SITC of Optical type smoke detector complete with base. 35 35.00 Each. 1153.00 40,355.00

.17.2.14 SITC of manual call point complete with mounting base. 6 6.00 Each. 3871.00 23,226.00

.172.15 Supply and Installation of Wall Mounted Horn cum Strobe Lights with 110 cd. 7 7.00 Each. 3506.00 24,542.00

.17.5.2 Supply and laying of 1.5 sq. mm dual core copper wire with 19 mm dia PVC conduit. 920 920.00 RM 173.00 159,160.00

VIII WATER TANKS. 0.00 0.00

18.48 S/F/F Standard make PVC water tank comp job as per direction E/I with relevant PHE works. 10000 10000.00 Ltr 9.70 97,000.00

59 Carriage of materials 0.00 0.00 289.654

60 Extra Cost Of Materials 0.00 0.00 289.654

Sub-total(A):- 38,410,320.00

Non Schedule items Sub-total(B):- 4,022,188.00

Schedule items Sub-total( C )=(A)-(B):- 34,388,132.00

Applying Correction Factor 0.982 on Schedule item(SOR) (D) 33,769,146.00

Adding 5.36% extra GST on SOR item(E ) 1,810,026.00

MAINTAINANCE WORK FOR 5 YEAR 1,227,118.00

Grand total:- 40,828,478.00

Executive Engineer

Building Division, Jamui