REPAIRS OF WALL AND PERIODICAL SERVICES OF MD ACCN UNDER CELL NO 1 UNDER GE (NW) NOFRA, COLABA, MUMBAI

Amount

Note : The tenderer shall note that before quoting his unit rate, all items of works shall be executed in high rise (G+14) building and provision of necessary scaffolding & safety measures shall deemed to be included in the rate quoted by the firm.

M&L for preparation of old decorated surfaces of walls by scrapping old paint with mechanically operated steel wire brush, wash the surface throughly and applying two coats of acrylic emulsion exterior grade (100%) (1st coat shall be applied by brush/roller, 2nd coat shall be applied by using spray machine over a coat of primer complete including necessary steel scaffolding + green cloth all round the work side for any posititon/height, complete all as specified and directed.(Work to be carried out in G+14 Building). (Note :-Necessary safety precautions need to taken before applying paint.)

M&L preparation of surfaces cracks of plaster internal/external of walls, ceilings/ chajjas upto 5mm wide, remove, loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat complete all as directed and specified by Engineer-in-Charge.

M&L preparation of old distempered surfaces of walls and applying two coat of oil emulsion distemper on walls etc all as specified.

M&L preparation of old decorated ceiling surfaces and applying one coat of Oil bound Distemper on ceiling etc all as specified.

M&L for preparation of old steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified.

M&L for writing letters or figures (BLOCK , ROMAN , ITALIC OR INDIAN ) n exc 30cm high and letters shall be painted with thick paint so that they shall stand out boldly and solidly without showing signs of brush marks to obtain desired result with colour and all as approved and directed by Engineer-in-Charge.

M&L for uprooting of small plants/roots from walls upto 7th floor of bldg. and use chemical to permanently destroy the roots and making good to disturbed surface with brick work in CM 1:4 and plastering in CM 1:4 on both sides of wall area of surface n exc 30cm x 30 cm complete all as specified and directed

Taking down cement plaster, any description on brick or stone walls and ceiling including racking of joints hacking for key scrubbing down with water etc ( Note :Debries removed outside MD land / As per BMC instruction and locations marked. No extra cost shall be paid for removal of debries, rates are inclusive of removal of debries upto 70 KM/ or as per state Govt. or BMC guidlines)

M&L Rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces, surfaces to be finished even and smooth without using extra cement , complete all as specified. (NOTE- Plaster work carried out in patch work)

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over a coat of 1 to 2 mm thick wall care putty all as specified and directed.

M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work/concrete surfaces finished even and smooth without using extra cement by using WPC @3% by weight of cement. (WPC shall be meaasured and paid seperately)

Supply only integral water proofing compound

M & L for applying texture paint of 4mm thick of desired finish as approved by GE over a coat of exterior wall primer which includes preparation of old decorated surfaces, cleaning of loose paint , grease , growth of fungus, algae or moss by using wire brushing and watering and applying two coats of exterior emulsion paint complete all as specified and directed. Make of texture paint as approved in make list (Work to be carried out in G+14 Building).

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified.

M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) as in walls, steps, jambs, pillars, window- cills,cooking platforms, working table, floors and like over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding and rounding all as directed.

Demolition of plain cement concrete of any description and in any position not other wise specifically provided for any description complete all as specified and directed.

Roughening Surfaces of old Concrete Floor by picking, sweeping clean and washing down with water to remove dust etc brussing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and as directed

Material and Labour for PCC 1:2:4 type B0 (12.5 mm graded stone aggregate) as in roof kerbs/pading or mud stops, rounded or chamfered on edegs using Pidiproof LW+ water proofing chemical of approved make as per manufacturer's instruction or equivalent approved availabale from list of manufacturers complete all as specified. [Note :- Water Proofing Chemical shall be measured and paid seperately].

Supply only Water proofing chemical complete all as specified and directed. Pidiproof LW+ of approved makes available from the list of manufacturers.

Material and Labour for the roof surface thoroughly wire brushed, washed and dried up and cleaned of all foreign matter and dust to receive bituminous primer, apply bituminous based cold applied primer @ 270 to 300 gms/Sqm manufactured by the same agency as that of APP all as per manufacturers instructions. Laying 5 layered 4 mm thick APP (A tactic poly propylene) modified membrane reinforced with 180 GSM (Gms/Sqm) of non woven polyester mat, applied by thermo fusion using LPG torch on the bottom portion of the membrane with an overlap of 100mm in longitudinal direction and applying two coats of bituminous aluminium paint on APP sheet incl removal of old damaged APP sheets and removing from MD land complete all as specified and as directed. Note- Works shall be carried out by through authorised manufacturer only, certificate in this regards shall be kept on record before payment of RARs.

Taking down CI/ rain water pipes (any size or pattern) including all fittings, heads, shoes, bends etc

S&F in repairs 100 mm dia sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste complete all as specified and as directed. (Work to be carried out in G+14 Building).

S&F in repairs 100 mm dia sand cast CI bend/tee/branch piece (single/ double) of any radius, jointed with neat cement paste complete all as specified and as directed. (Work to be carried out in G+14 Building).

S&F in repairs 75 mm dia sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste complete all as specified and as directed. (Work to be carried out in G+14 Building).

S&F in repairs 75 mm dia sand cast CI bend/tee/branch piece (single/double) of any radius, jointed with neat cement paste complete all as specified and as directed. (Work to be carried out in G+14 Building).

S&F in repairs 15mm pillar taps, cast copper alloy with captain heads chromium plated, fancy type screw down high pressure with long screwed for iron pipe all as directed.

S&F in repairs stainless steel wire cloth (Wire dia 0.36 mm) and average width of aperture 1.40 mm and fixed with and including Ilnd class hard wood beading complete as specified and directed .

S&F in repairs stainless steel wire cloth (Wire dia 0.36 mm) and average width of aperture 1.40 mm and fixed to aluminium beading and rubber bearing Vent/window complete all as specified and directed. (cost of aluminium beads and neoprene included in relevant item of aluminium window & Ventilators).

S&F in repair stainless steel toilet paper holder fixed to walls with chromium plated brass screws complete.

S&F in repair wash hand basin vitreous china white flat back or angle type of size 580mmx450mm including waste chain and plug and porcelain stopper, a pair of brackets or errecting stand and etc. complete all as specified and directed.

S&F in repairs Kitchen sink with drainage board made of stainless steel 1mm thick with plugs washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe etc Complete all as specified and as directed.

S&F in repairs plastic water closet seat covers standered closed pattern with flat bottom and cover and MS chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair grating doom 100mm dia of PTMT (minimum wt 25 Gms)

S&F in repairs PVC cabinet mirror of size 300 x 450 mm complete all as specified and directed.

S&F in repairs stainless steel plate rack of size 900X580X210 mm fixed to wall with screws complete all as specified and directed.

S & F in repair soap dish wired type complete all as specified and directed.

S & F in repair night latch seven levers suitable for doors in repairs complete all as specified and directed.

S&F in repairs tubular towel rail brass chromium plated 20mm dia D type 60cm long between flanges including a pair of brackets complete all as specified and directed.

S&F in repairs of 32mm dia PVC (flexible) waste pipe 900 mm long complete.

S&F in repair 32mm dia brass chromium plated waste coupling for wash hand basins fixed in repair complete

S&F in repairs of 38mm dia PVC (flexible) waste pipe 900 mm long complete.

Supply and fix in repair 100 mm dia CI nahani trap jointed with run lead and making good to floor with existing tile.

M & L for Preparation of existing mosaic cement tiles flooring and polishing with machine/hand to surface and pointing of joints to match the colour complete all as specified.

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge

M & L Glazed ceramic tiles in vertical surfaces of size 300x200mmx7-8mm thick including over 10mm thick Screed bed or bedding layer in CM 1:4 for laying tile finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge

SATGURU ENTERPRISE (BID ID -3291800)

Nilesh Construction (BID ID -3291600)

SHRI SAI ENTERPRISES (BID ID -3291002)

Anil Industrial Corporation (BID ID -3291919)

ROHIT CONSTRUCTION (BID ID -3291578)