Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹27.7 L+₹2.9 L (11.7%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹29.7 L+₹4.9 L (19.9%)Rejected-Finance 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹32.2 L+₹7.4 L (29.8%)Rejected-Finance SCHEME NO 07 BLOCK NO 22 FLAT NO 03 NEW GURDASPUR DISTT GURDASPUR PB 143521 | GURDASPUR | PUNJAB | 143521 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹33.8 L+₹9.0 L (36.3%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹39.5 L
EMD Value
₹79,000
Closing Date
18 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 881 EWS C/o 56 APO
GE 881 EWS C/o 56 APO
PROVN OF SECURITY LIGHT INFRA ALONG PERIMETER AND CONNECTED WORKS AT KG TOP UNDER GE 881 EWS
2023_MES_619710_1
GE/PNH-49/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE 881 EWS C/o 56 APO
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE 881 EWS
₹79,000
Yes
17 Nov 2023
20 Sept 2023
25 Oct 2023
20 Sept 2023
18 Oct 2023
4 Oct 2023
Amount
Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in any type of soil complete all as specified and directed.
Excavation in trenches not exc. 1.5 m wide and exc. 1.5m in depth for foundation of poles, stay assembly etc and getting out in hard/ dense soil complete all as specified and directed.
Returning, filling in surplus spoil including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.
Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
M&L for Sand cushioning to under ground cable providing with a layer of Sand 08 cm thick before laying of cable and 15 cm after laying of cable in trenches, hand punning complete all as specified and directed by Engr-in-charge (Note : Punning thickness of 18 cm will be measured for payment purpose)
M&L for Burnt bricks locally available, sub class 'B', laid flat for protection of under ground cable complete all as specified and directed at site.
Supply, laying , jointing and testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 50 sqmm 3.5 core, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts including cable gland of suitable sizes and aluminium lugs for connection, complete all as specified and directed. Make: Finolex / KEI Industries Pvt Ltd / Polycab / Gloster / Universal Cables. Note: Excavation, earthwork, sand cushioning, brick protection shall be measured & paid for separately.
All as per Item No 7 above but size 4 core 25 Sqmm complete all as specified and directed.
All as per Item No 7 above but size 4 core 16 sqmm complete all as specified and directed.
Supplying, installation and erection in true vertical position steel tubular swaged welded pole, 8.50 metre long, conforming to IS-2713 part-II, type 410 SP-22, complete with cast iron/MS base plate 6mm thick and of size 300x300mm, finial taper, pole cap, bolts, nuts, washers & screws etc., pole made out of ERW Mild steel tubing tubing including holes of required Nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint on exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting three signal red colour bands at lower portion of exposed pole starting from plinth block , each band of 300mm height at 300mm spacing, painting pole No with black paint by stenciled letters/figures of 8cm height, complete all as specified and directed. Make : NATIONAL TUBING CO KANPUR, BHARAT CONDUIT & STEEL WORKS KANPUR, JINDAL STEEL PRODUCT, C&S ELECTRIC, SHIVAM METALS Note: Excavation, earth work and PCC in foundation of poles, coping etc shall be measured and paid separately in respected items.
S&F Tubing 'light grade' galvanised iron with all fittings and fixed to poles, walls etc. with flat iron clamps/bolts/nuts/washers or laid in floors/under roads complete of size 40 mm bore, complete all as specified and directed.
M&L for Plain cement concrete (1:3:6) Type C-2 (using 40mm graded crushed stone aggregates) as in foundation for steel tubular poles including necessary form work and finishing the exposed surface even and smooth with out using extra cement complete all as specified and directed.
M&L for Plain cement concrete (1:2:4) Type B-1 using 20 mm graded crushed stone aggregates, as in coping of steel tubular poles, as in benching including whitering slightly chamferred angles including necessary form work and finishing the exposed surface even and smooth with out using extra cement complete all as specified and directed.
S&F Earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6.0 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32 x 6 mm size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 8 mm dia TMT bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified and directed. NOTE: The unit rate includes earth strip and protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point.
Prime Mover : Primemover suitable for driving alternator 15 KVA capacity having the suitable BHP at 1500 RPM for rated output for alternator in accordance with latest BS/IS Specification with electric starting device with all standard fitting and suitable capacity of lead acid maintenance free battery of 12 Volts 120AH 01 nos with battery charger each (Make:- Exide/Amaron/HBL/Standard). Engine over speed safety mechanism Shall be incorporated. The engine shall be equipped with standard fitting as per manufacture's recommendations. Engine Control Panel : (a) All relevant parameters shall be conventionally displayed on complete panel thereby providing easy monitoring of lub oil, pressure, coolant Temperature, Battery charging, Ammeter, RPM, Hour meter and starting switch etc. (b) AMF panel with Bye pass arrangement for main and DG set both supply, internal wiring and power contactors suitable for 15 KVA DG set all as manufacturer's recommendation. Bye pass arrangement Main & DG set supply alongwith all the parameters and accessories as per manufacturer's recommendation and CPRI approved and as per relevant IS. Fuel Tank : Fuel tank of 12 hours capacity will be installed as per the manufacturer's requirement including all necessary pipe connections from fule tank to engine and over flow from engine to tank.
Engine Alternator : Engine alternator of capacity 15 KVA output 3 phase, 50 HZ, 415 Volts, 4 wire, AC supply 0.8 power factor at 1500 RPM self regulated self excised screen protected and drip type, insulation class 'H' continously rated brush less type conforming to relevant BS/IS code as per current manufacturing shedule of standard manufacturer. Engine Alternator Shall be mounted on specially designed base plate of rigid welded constructions with anti vibraton pads. The DG set shall be placed on foundation including necessary civil works as per manufacturer's recommendation/ site requirement. The output of alternator not less than 15 KVA in all adverse conditions, as the DG set to be installed at HAA 950m above MSL. Note : (a) The unit rate shall deemed to include the cost of diesel and lubrication required for testing and commissioning of DG set as per department procedure and shall be arranged by contractor. (b) Extenssion of exhaust pipe for DG set along with standerd accessories like flange, nut bolts, asbestous rope etc shall be provided by the contractor and the cost of the sameshall be included in the unit rate quoted by contractor. (c) Cost of foundation and necessary civil works as per manufacturer's recommendation/ site requirement shall be included in the unit rate quoted by contractor.
S&F Energy efficient LED street light fittings, 70 Watt, 230 volt AC out door type with high pressure die-cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optic complete with IP66 protection, with inbuilt surge protection device upto 5 KV, prewired including three core PVC insulated, sheathed 1.5 sqmm multistranded aluminium conductor with 2 core 1.5 sqmm PVC insulated cable from junction box to light fitting complete all as specified and as directed. Make: HAVELLS Cat Part No. ENDURAPEARLNEOSL70WLED757PASYTOPC or equivalent Cat part of Make as specified in PS.
S&F street light bracket made out of GI tubing 40mm bore, medium grade, 1.5 metre long bent to shape as directed, including suitable MS clamp of MS Flat with MS bolts, nuts and washer fixed to steel tubular pole/PCC pole duly painted with two coats of aluminium paint complete all as specified and as directed.
S&F thermo plastic street light weather proof out door type junction box of size 200mmx 160mm x 98mm complete with 4 way connector-01 No, 6 Amps SP MCB-01 No, easily openable and having locking arrangement including incoming and out going cable holes with fixing MS clamp and water tight polymide cable gland for each connection complete all as specified and directed.
M/S PARSHOTAM KUMAR GUPTA
NATIONAL TRADING COMPANY
HARPAL ENGINEERS AND BUILDERS
HUSSAIN ENTERPRISES
M/S BHATT TRADERS
JAMWAL CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .