Iyothee Thass Pandhithar Habitation Scheme 2024-25

Amount

Earth work excavation for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherver necessary as per SS 20 B etc., complete complying with standard specifications.

Plain Cement Concrete 1:4:8 (one cement,four sand and eight aggregate) mix using 40mm gauge hand broken hard granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm well rammed etc., complete complying with standard specifications.

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC slabs, Rectanular beams, Lintels and Stair case waist slabs conopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over country wood joists of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by Casuarian props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed by departmental Engineers.

Supplying, fabricating and placing in position mild steel/Ribbed for steel roads for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specifications.

Reinforced Cement Concrete 1: 1 1/2: 3 ( one cement, one and half sand and three aggregate) mix using machine crushed / hand broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding centering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherver necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers.

Brick work in cment mortar 1:5 (one cement and five sand) mix using second class chamber burnt bricks of size 9" x 4 3/8" x 2 3/4", including cost and conveyance of all other labour and material charges to site etc., complete complying with standard specifications.

Dismantling, Clean removal of cement plaster from walls in cement mortar complete complying with standard specifications etc., complete.

Dismantling, clearing and Removal One Course of Pressed Tile Roof finish in cement mortar complete complying with standard specifications etc., complete.

Remoal Doors and Windows including removal of frames, hinges and fastenings complete complying with standard specifications etc., complete.

Dismantling Remoal Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs complete complying with standard specifications etc., complete.

Plastering with cement mortar 1:3 mix to 10mm thick including cost and conveyance of all materials to site including curing etc., complete complying with standard specifications.

Plastering with cement mortar 1: 5 mix to 12mm thick including cost and conveyance of all materials to site including curing etc.,complete as per standard specification.

Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.

Window

Dadoing the walls with colour Glazed square tiles of best approved quality in Cement mortar 1:2 ( one cement and two sand ) mix and pointing with the same colour cement neatly to full depth of tiles in all floors as directed by the departmental officer etc., complete complying with standard specifications.

Paving the floor with vitirified tiles of approved quality and colour of any size in all floors over 20mm thick cment mortar 1:3 (one cement and three sand) mix base above the existing bed concrete and pointing with same colour cement added with colouring pigments etc., complete complying with standard specification.

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Provding and finishing over slopped RCC roof or Sunshade with one course of Ornamental tiles of size 23 x 15 x1.2cm for front elevation laid with c.m 1:3 (one cement three sand 20mm thick and pointed with same mortar mixed with red oxide and WPC at the rate of 2% by weight of cement including neatly finishing etc., complete as per standard specification (The colour and make of the tiles should be approved before execution from the deparmental officers)

Supplying and laying Precast Designer Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M40 grade 83mm thick (table clauses 5 and 9.14) suitable for bus terminals industrial complexes road on expensive soils etc., including the cost of paver block of size 225mm x 12.50 mm x 80mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over sand bed of 150mm thick (excluding the cost of sand) conveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling the sand to paver block etc., complete ISI 15658-2006.

Wring with 2 x 1.5 sq.mm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TW switch box and 5A F.T. switch in flush wall with 3mm Tk hylum sheet cover for making good of the concealed portion with suitable colour for PVC open light Point.(SD.NO:20)

Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch on suitable TW box. Plug point( SD 138 )

Wiring with 2 x 4 Sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor cable of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC assosaries,in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm tk hylem sheet for 15 A 3 pin non interlocking CS plug with continious earth wire conection of 14 SWG TC wire, and making good of the concealed portion,with suitable colour for concealed Power Plug Point ( S.D.NO:39 )

Supply and run of 4 x 6 sqmm (56/0.3) PVC insulated SC unsheathed Cu,conductor of 1100V grade in 32mm dia GI pipe ( class "B") suitably bent at both ends with necessary angle iron up right and end supports for mains. (S.D.70)

Supply and run of 4 x 6 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains. (S.D.65)

Supply and fixing of single box type 4"40W flu fittiing complete with copper choke and condensor with TW round blocks on wall or ceiling with PVC unshealthed copper leads from terminals to the fitting. (S.D.88)

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb.(SD .84)

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existing clamps.(SD 107)

MK ROAD WORKS (BID ID -1122288)