Loading
Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹3.7 L
Closing Date
31 Aug 2026, 3:00 pm3d left
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
ELECT.GEN.
15 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB(available in GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Calculation of required minimum average annual contractual turnover:V=Rs. 18451288, N=8 months = 2/3 years, V/N=Rs. 18451288*3/2 =RS.27676932, V is less than V/N, Hence, required minimum average annual contractual turnover = Rs.18451288
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. Note: (1) Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
Defination of Similar Work :- Electrification / Rewiring of Service or Residential building / Yard / HT / LT substation work / HT / LT cable work / street lighting / platform or building lighting management / circulating area Lighting / Electrical overhead power supply work / Electrical pump work etc.
13 conditions · 7 needing a document upload
The registration of contractors working under Railway departments with ESIC is mandatory (if applicable as per current Law / Act)
In case a tenderer is participating as Sole Proprietor in a tender, it is mandatory for him to submit an undertaking on suitable stamp paper to this effect clearly mentioning PAN number also along with tender document at the time of submission of tender.
The tenderer may submit scanned copy of partnership deed if applicable.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Contractor shall ensure all precautions during digging work close to Rly signaling, telecom electrical cables etc. Penalties to be imposed for damages to any cable as per Railway board letter no. 2021/Tele/5(2)/3- Part(1)/(3425647) dtd 12.06.2023
Electrification work in connection with following, Sch. A - Upgradation of Niphad Railway station and Horticulture work at all Kumbh station. ; Sch. B - Providing Continuous Covered Shed along Passenger Circulation Path within Railway Premises at Kasbe Sukene, Kherwadi, Odha, Nashik & Devlali (2500x6M). ; Sch. C - MMR-IGP: Coach watering pipelines (in make shift arrangement) and other allied facilities at Devlali, Nashik, Kherwadi, Kasbesukene, Odha.
BSL-L-W-T-74-2026~CR
BSL-L-W-T-74-2026
Open
Works - General
8 Months
Jalgaon, Maharashtra
₹0
₹3.7 L
5 Aug 2026
5 Aug 2026
17 Aug 2026
512 items across 6 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 20,05,238 | ||
| — | Breakup | for details. | — | ||
| Supply, erection, testing and commissioning of Point wiring for light, fan, exhaust fan in PVC casing capping with 2x2.5 sq. mm. FRLS multistranded PVC copper wire alongwith all accessories, running earth etc. | — | — | — | 46,600 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing and commissioning of 6 Amp. 3 pin universal plug socket complete with switch and point wiring in PVC casing caping with 2x2.5 sq mm FRLS multistranded PVC copper wire alongwith all accessories, running earth etc. on Separate Switch board. | — | — | — | 6,710 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing & commissioning of 6 A 3 Pin universal plug socket complete with switch, wiring and earth connection, to be provided in Existing light/fan board. | — | — | — | 1,200 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing and commissioning of 6 A 3 Pin Plug socket complete with switches and point wiring with 2x2.5 sq.mm FRLS copper conductor and copper earthing wire- 4 Nos plug in each board complete. | — | — | — | 6,630 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing and commissioning of 15 A 3 pin universal plug socket with switch alongwith independent point wiring in PVC casing capping with 2x4 sq. mm. FRLS multistranded PVC copper wire alongwith all accessories, running earth etc. | — | — | — | 4,800 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing & commissioning of submain from switch board to single phase DP switch / DP one circuit meter comprising of submain with 2x4 sq.mm. PVC insulated FRLS 1.1KV multistranded wire & one running earth of 2.5 sq.mm. copper conducting PVC insulation green colour of 1.1 KV grade on rigid PVC casing caping with all accessories. | — | — | — | 9,000 | |
| — | Breakup | for details. | — | ||
| S.E T.C. of Submain with 2x6 sqmm FRLS copper wire inside PVC Casing caping with running earth etc complete. (1 m length of submain consists one cktmtr including all accessories & 2 wire of 6 sqmm with one wire of 2.5 sqmm for earth conn). | — | — | — | 3,820 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing and commissioning of Submain with 2x10 sqmm FRLS copper wire inside PVC Casing caping with running earth etc complete.(1 m length of submain consists one cktmtr including all accessories & 2 wire of 10 sqmm with one wire of 2.5 sqmm for earth conn.) and finishing of the surface after rewiring. | — | — | — | 2,230 | |
| — | Breakup | for details. | — | ||
| Wiring of the concealed Light / fan Point with all accessories and running earthing copper conductor as per standard practise. The switches shall be of modular type.(along with the all accessories and including cutting the wall / ceiling / chipping and re plastering, distempered / painted as the case may be, the same as good condition as directed by Engineer in charge at site.) | — | — | — | 33,650 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing & commissioning of Mini MCB modular type 6A-32 A. | — | — | — | 2,710 | |
| — | Breakup | for details. | — | ||
| Supply of material and fixing and concealed wiring for (3 Plug & 3 switch on separate board) 6 A 3 pin universal socket outlet complete with 6 Sqmm PVC insulated copper conductor wires along with 14 SWG tinned copper earth wire in 25mm/ 32mm dia PVC conduit pipe flush type 5A socket outlet and 5A piano type switch in GI box with PVC topsheet 5mm thick..(along with the all accessories and including cutting the wall / ceiling / chipping and re plastering, distempered / painted as the case may be, the same as good condition as directed by Engineer in charge at site) | — | — | — | 6,670 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing & commissioning of 6A & 3 Pin Universal Modular Type Plug Socket with switch & concealed type point wiring with 2x2.5 sq mm FRLS Multistranded PVC Copper wire with all accessories and running earth on seprate board.(along with the all accessories and including cutting the wall / ceiling / chipping and re plastering, distempered / painted as the case may be, the same as good condition as directed by Engineer in charge at site) | — | — | — | 5,840 | |
| — | Breakup | for details. | — | ||
| Wiring of the concealed 6A /3 Pin Universal Plug Point on switch board with all accessories and running Earthing copper conductor as per standard practice.The switches shall be of Modular Type. | — | — | — | 1,340 | |
| — | Breakup | for details. | — | ||
| Wiring of Concealed 15 A 3 Pin Wall Socket Point complete with 4 Sqmm Wiring all accessories and running earthing copper conductor as per standard practice. The switches shall be of modular type for Gyser, Kettle & Fridge.(along with the all accessories and including cutting the wall / ceiling / chipping and re plastering, distempered / painted as the case may be, the same as good condition as directed by Engineer in charge at site) | — | — | — | 10,850 | |
| — | Breakup | for details. | — | ||
| Supply and concealing of rigid PVC conduits of 20 mm Dia (IVORY colour) confirming to IS 9537/P3/1983 or latest (ISI marked) with wall thickness not less than 2.0 mm along with the all accessories and including cutting the wall / ceiling / chipping and re plastering distempered / painted as the case may be, the same in good condition as directed by Engineer in charge at site. | — | — | — | 1,500 | |
| — | Breakup | for details. | — | ||
| Supply of all materials required and single phase wiring by using 2 Nos. of 4.0 sq.mm PVC insulated FRLS type flexible copper cable conforming to IS.No:694, 1100 V grade with 1 No. of 4.0 sq.mm flexible copper cable through the PVC pipe already laid. Color coding shall be followed as directed by Engineering charge at site (3 Nos. of 4.0 Sq.mm Copper cable wire shall be taken as 1 Mtr. for measurement purpose). | — | — | — | 1,600 | |
| — | Breakup | for details. | — | ||
| Supply and concealing ofrigid PVC conduits of 25 mm Dia (IVORY colour) confirming to IS 9537/P3/1983 or latest (ISI marked) with wall thickness not less than 2.0 mm along with the all accessories and including cutting the wall / ceiling / chipping and re plastering the same as good condition as directed by Engineer in charge at site. | — | — | — | 600 | |
| — | Breakup | for details. | — | ||
| Supply and wiring including termination by 3 nos. of 6 sq mm PVC insulated flexible copper cable conforming to IS.No: 694, 1100 V grade through the existing PVC pipe already laid, Color coding shall be followed as directed by Engineer in charge at site (3 nos. of 6 sqmm copper cable wire shall be taken as 1 m for measurement purpose) | — | — | — | 2,170 | |
| — | Breakup | for details. | — | ||
| Supply and concealing of rigid PVC conduits of 32 mm Dia (IVORY colour) confirming to IS 9537/P3/1983 or latest (ISI marked) with wall thickness not less than 2.0 mm along with the all accessories and including cutting the wall / ceiling / chipping and re plastering the same in good condition as directed by Engineer in charge atsite. | — | — | — | 1,100 | |
| — | Breakup | for details. | — | ||
| Supply and wiring (3 Phase) including termination by 4 nos of 10.0 sqmm PVC insulated fire retardant low smoke (FRLS) flexible copper cable conforming to IS No: 694, 1100V grade with 1 no of 14 SWG tinned copper wire through existing PVC pipes already laid. Color coding shall be followed as directed by Engineer in charge at site.(4 nos of 10.0 sqmm copper cable and 1 no of 14 SWG tinned copper wire shall be taken as 1 m for measurement purpose.) | — | — | — | 6,000 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing & commissioning of USB Power charger HUB/Device enclosed inside the frame on the top, 5.2V DC / 8 Amp, 8 Ports (vertical) with reversible compability. Input Voltage: 110-290V AC, 1.5 Mtrs. Cable length, Blue coloured LED display for Current & Voltage at each port & smart chip for calibrating the Current required on each power port. Metal Holder attached with USB device to keep 8 Mobile Phone. Size 580mm X 400 mm X 2 mm thick. | — | — | — | 18,938 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing & commissioning of Mains with 2x1.5 Sq.MM FR Copper PVC insulated wire laid in provided conduit/ Trunking/ inside pole/Bus-bars or any other places. | — | — | — | 2,950 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing & commissioning of PVC Flexible pipe 1/2 Inch | — | — | — | 2,100 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing and commissioning of teakwood /PVC Main Board with electronic KWH meter 5-30 A cap.230 V,50 hz. Single phase duly wired with FRLS multistranded PVC copper wire with MCB,cutout, neon indication & earth connection etc. | — | — | — | 3,378 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing & commissioning of Occupancy / Movement Sensor with contactor for Lighting Circuit. | — | — | — | 15,538 | |
| — | Breakup | for details. | — | ||
| Supplying LED concealed type foot / step light with aluminium body for indoor application suitable for upto 5 W LED including driver and erecting by making necessary arrangement/ recess in wall to make it flush with surface. | — | — | — | 1,170 | |
| — | Breakup | for details. | — | ||
| Supply,fixing, testing & commissioning of indoor type LED luminaires 20W maximum, 4 ft long,having inbuilt auto dimming driver and sensor, System efficacy 110 lm/W, Luminaires must becapable of delivering minimum 2200 lumens, luminaires complete with all accessories | — | — | — | 2,700 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing & commissioning of 2x20 Watts LED surface/suspended water proof industrial luminaries with polycarbonate housing and diffuser | — | — | — | 27,060 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing & commissioning of 2Ft 10 watt LED tube 4000 k all in one fixtures for Dressing, mirror and kitchen. | — | — | — | 14,140 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing & commissioning of LED Flood Light Fitting 60W-80W. The housing shall be powder coated, Aluminium extruded, cover on both sides with extruded aluminium heat sink for proper heat dissipation with heat resistance toughened glass, protection IP-65. | — | — | — | 11,180 | |
| — | Breakup | for details. | — | ||
| LED Flood light fittings of 250watt with IP 66 protection and 5 years warranty. (for flood Light) IS 10322 IS:16107 (Q3) & 250 WATT IP 66 Flood Light with 5 Year warranty. | — | — | — | 96,380 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing and commissioning of 300 W LED High Mast Flood Light for Tower as per specification. | — | — | — | 51,130 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing and commissioning of 30 W (±2 W) Solar All in One LED streetLight system (2 days backup) including solar PV panel, MPPT charge controller, Lithiumion battery,Hybrid type, Tubular pole with nut bolt and fixing accessories complete. | — | — | — | 1,26,100 | |
| — | Breakup | for details. | — | ||
| Supply,installation, testing & commissioning of 5 Mtr long hot dip galvanised octagonal pole with 130 mm bottom & 70 mm top made up of 3mm thick steel sheet along with base plate of size 200x200x12mm with foundation..(Along with 2 pole RCBO 6A, with 30 mA sensitivity). | — | — | — | 66,610 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing & commissioning of LED street Light Roadway fittings in aluminium PDC housing, toughened glass cover with IP66 protection, Wattage-72 watts, input voltage-240 volts ac, 50Hz. Complete. | — | — | — | 17,060 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing and commissioning of astronomical street light control panel outdoortype CRCA sheet steel powder coated capacity- 6 kW single phase consisting digital 24 Hr timer,32 A TP contactor, 40 A SPN (DP) MCB, auto/manual switch with complete wiring suitable to bemounted on channel/angle fixed on electrical pole IP-32 | — | — | — | 11,793 | |
| — | Breakup | for details. | — | ||
| Supply & erection of FRP junction box of suitable size having terminals and 1x16 A Cut out with Two Nos of entry glands. | — | — | — | 9,720 | |
| — | Breakup | for details. | — | ||
| — | — | — | 61,280 | ||
| — | Supply in | of all material,excavation ratio 1:3:6 for above work. | — | ||
| — | — | — | cement | ||
| — | Breakup | for details. | — | ||
| Supplying & erecting mains with 4x10 sq.mm.and earth wire 6 sq.mm FR PVC copper wire, in rigid PVC conduit 32mm dia as per specification | — | — | — | 32,850 | |
| — | Breakup | for details. | — | ||
| Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 2.5 to 16 sq mm., with necessary material as per specification | — | — | — | 3,840 | |
| — | Breakup | for details. | — | ||
| Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 25 to 50 sq mm., with necessary material as per specification No. CB-JT/LT | — | — | — | 5,416 | |
| — | Breakup | for details. | — | ||
| Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 70 to 120 sq mm., with necessary material as per specification No. CB-JT/LT | — | — | — | 6,096 | |
| — | Breakup | for details. | — | ||
| Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 2.5 to 16 sq mm., with necessary material as per specification | — | — | — | 4,896 | |
| — | Breakup | for details. | — | ||
| Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 25 to 50 sq mm., with necessary material as per specification | — | — | — | 6,544 | |
| — | Breakup | for details. | — | ||
| Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 70 to 95 sq mm., with necessary material as per specification | — | — | — | 9,046 | |
| — | Breakup | for details. | — | ||
| Supply of 4 core 16 sqmm armoured XLPE Cable. | — | — | — | 15,300 | |
| — | Breakup | for details. | — | ||
| Supply of 4 core 25 sqmm armoured XLPE Cable. | — | — | — | 20,800 | |
| — | Breakup | for details. | — | ||
| Supply of LT XLPE Armoured 4 Core 50 Sq mm Aluminium cable as per relevant IS. | — | — | — | 48,600 | |
| — | Breakup | for details. | — | ||
| Supply of 4 Core 70 sqmm armoured LT XLPE Cable. | — | — | — | 62,000 | |
| — | Breakup | for details. | — | ||
| Supply of 4 Core 95 sqmm armoured LT XLPE Cable. | — | — | — | 72,600 | |
| — | Breakup | for details. | — | ||
| Trenching & refilling of LT/HT/ Various sizes of PVC / XLPE cables- Along the Road (Size - 900mm x 300mm) | — | — | — | 47,250 | |
| — | Breakup | for details. | — | ||
| Digging of cable trench 300/450 mm x 1000 mm in RCC/PCC/hard soil & refilling as per specification and requirement at the site. | — | — | — | 32,800 | |
| — | Breakup | for details. | — | ||
| Transportation, Laying, Installation, terminating, testing and commissioning of LT/HT cable of sizes 10 sqmm to 300 sqmm in existing trench, pipe or on structure. | — | — | — | 8,750 | |
| — | Breakup | for details. | — | ||
| Erection,testing and commissioning of cables other than trench i.e.Wall/Truss including clamp, GI wire and hardware | — | — | — | 16,250 | |
| — | Breakup | for details. | — | ||
| Supply & laying of GI pipe Class B, ISI marked under road /Clamping with erecting pole or wall as per techincal specification & drawing for passing cable. | — | — | — | 4,500 | |
| — | Breakup | for details. | — | ||
| Supply,installation, testing & commissioning of HDPE Pipe 110 mm Nominal Dia as per IS-4984-1995. | — | — | — | 6,675 | |
| — | Breakup | for details. | — | ||
| Supply and laying of RCC half round pipe 150 mm ID & 1 mtr length. | — | — | — | 30,783 | |
| — | Breakup | for details. | — | ||
| Supply and laying of RCC Hume Pipe of size 6"(150mm) dia 2 mtr. Length. | — | — | — | 1,356 | |
| — | Breakup | for details. | — | ||
| Supply, erection of RCC Type cable route marker with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. | — | — | — | 3,493 | |
| — | Breakup | for details. | — | ||
| Supply & Erection of RCC Warning Cover and refilling the cable trench in an approved manner. | — | — | — | 2,261 | |
| — | Breakup | for details. | — | ||
| Supply and laying of RCC cable Trench & Cover with metal lid for cable laying | — | — | — | 1,11,600 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing & commissioning of maintenance free earthing as per RDSO specification no. RDSO/PE/SPEC/ PS/0109-008(REV '0') with improved earthing enhancing compound and exothermic welding | — | — | — | 2,70,234 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing & commissioning of GI Wire 8/10 SWG | — | — | — | 45,600 | |
| — | Breakup | for details. | — | ||
| Supply of single phase RCBO of 32A capcity, 30 mA sensitivity with metal enclosure | — | — | — | 17,050 | |
| — | Breakup | for details. | — | ||
| Providing & erecting Hot dipped Galvanised Perforated type cable tray manufactured from 16 SWG (1.6 mm thick) Gl sheet of 300 mm width & 100 mm height comprising all required standard accesssories. | — | — | — | 1,59,900 | |
| — | Breakup | for details. | — | ||
| Supply, fixing, testing and connecting of LED based name board for station with RGB name color complete with all accessories as per specification. For Hindi / Marathi letters. | — | — | — | 1,06,520 | |
| — | Breakup | for details. | — | ||
| Supply, fixing, testing and connecting of LED based name board for station with RGB name color complete with all accessories as per specification. For English letters. | — | — | — | 47,960 | |
| — | Breakup | for details. | — | ||
| Supply, fabrication, fixing and erection of MS Work of miscellaneous size and for cable tray etc. including painting complete. | — | — | — | 10,000 | |
| — | Breakup | for details. | — | ||
| Supply, fabrication, laying welding and connection of GI Flat of size 25x3 mm from earth pit withGI nut Bolt suitable size. | — | — | — | 5,150 | |
| — | Breakup | for details. | — | ||
| Dismantling the existing light, fan, bell, clock, independent plug point, wiring including circuit mains of all types along with accessories etc.complete. | — | — | — | 45 | |
| — | Breakup | for details. | — | ||
| Dismantling of cables with accessories. | — | — | — | 14,362 | |
| — | Breakup | for details. | — | ||
| Dismantling of existing old Cables of size 25 sqmm to 120 sqmm and handing over to depot incharge at their depot. | — | — | — | 180 | |
| — | Breakup | for details. | — | ||
| Provision dismantling of overhead tapping /OH power supply arrangement & transportation to depot. | — | — | — | 11,860 | |
| — | Breakup | for details. | — | ||
| Dismantling the existing pole above 6 m height with brackets, clamps, insulators, stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level along with transportation of released pole to nearest OSM depot. | — | — | — | 14,090 | |
| — | Breakup | for details. | — | ||
| Dismantling of existing main Boards, wires, cables etc addition and alterartion in existing arrangement with associated accessories. | — | — | — | 52,986 | |
| — | Breakup | for details. | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril2022dt.27.04.2022.pdf GCC 2022
ATTACHMENT
ACS1to6ofGCC.pdf
ATTACHMENT
ACS7to10ofGCC_1.pdf
ATTACHMENT
ACS11toGCC2022_1.pdf
ATTACHMENT
Tenderdocument742026_1.pdf Tender document
ATTACHMENT
GCCApril2022dt.27.04.2022.pdf
ATTACHMENT
Tenderdocument742026_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].