Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.9 LAccepted-AOC PUB SITARA H NO 00 CITY TOWN RANGIA P O RANGIA P S RANGIA DISTRICT KAMRUP OLD PIN 781354 | KAMRUP | ASSAM | 781354 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹5.9 L+₹500 (0.09%)Rejected-AOC | L2 | Rejected-AOC Highest Bidder |
| Sl No | Description | Qty | Unit | Bhupen Chandra Nath H1 | Subarna Kumar Nath H2 |
|---|---|---|---|---|---|
| 1.00 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (I) Private Land | 634.81 | cum | 271.92 ₹1,72,617.54 Lowest | 271.92 ₹1,72,617.54 Lowest |
| 2.00 | Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302 (I) Stone/Boulder | 117 | cum | 2,251.36 ₹2,63,409.12 Lowest | 2,251.36 ₹2,63,409.12 Lowest |
| 3.00 | Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specifications Clause 1302 | 58.5 | cum | 2,158.18 ₹1,26,253.53 Lowest | 2,158.18 ₹1,26,253.53 Lowest |
| 4.00 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 | 1 | each | 25,719.81 ₹25,719.81 | 25,219.81 ₹25,219.81 Lowest |
Tender Value
₹5.9 L
EMD Value
₹11,800
Closing Date
6 Jan 2026, 2:00 pmClosed
Executive Engineer
O/o of the EE, PWRD, Bilasipara CSD TRD
Recovery and Reconstruction of NH-31 at Shiva Mandir to Dhirbeel via Pakhipara Road (from Ch. 50.00m to Ch 550.00m) under NDRF (PDNA-2022) for the year 2025-26
2025_PWD_49621_31
BLP/Tech/NIT/02/564
Open Tender
Civil Works – Roads
Item Rate
Bilasipara
Please refer Tender documents.
4 documents required · 4 mandatory
₹100
₹11,800
Yes
O/o of the EE, PWRD, Bilasipara CSD TRD
2 Mar 2026
26 Dec 2025
6 Jan 2026
26 Dec 2025
6 Jan 2026
26 Dec 2025
26 Dec 2025 - 6 Jan 2026
30 Dec 2025
Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (I) Private Land
Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302 (I) Stone/Boulder
Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specifications Clause 1302
Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.52 MB
Tendernotice_2.pdf
PDF • 0.68 MB
Tendernotice_3.pdf
PDF • 0.19 MB
BOQ_78819.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .