Procurement of Modular Digital Cinema Camera with accessories for Films Division

Procurement of Camera and their Accessories 1. Body Type (form factor) :- Modular Digital Cinema CAMERA Magnesium Aluminum alloy 2. Sensor:- Super 35 CMOS/MOS Sensor with minimum 24 x 12.7mm sensor size and Minimum 8 effective megapixels. 3. Recording Format:- 4K Raw (4096x2160) or above on camera or dockable recorder of same OEM. (Technical collaboration with different recording unit OEM is accepted.) Must be able to record both RAW & Proxy Files simultaneously. 4. BIT quantization: - RAW 12 Bit or more, 150 mbps or greater. 4K Master at 10 Bit,422, 150mbps or greater on Camera Proxy files 4:2:2 – 8Bit or greater 5. Dynamic range/Exposure Latitude: - 14 stops of DR. In camera color grading separate LUTs for monitor output. LUT import & export. 6. ISO Range (Native) Exposure Index :- <800(native) EI range -500 to 5000 or more 7. Lens Mount :- PL Mount or Camera Native mount with additional PL mount or PL Adaptor of Camera OEM. 8. Frame rates :- 1-60 fps at 4K (4096x2160) on camera 1-200fps or more at 2k on camera/dockable recorder of Camera OEM, with project timeline of 24 & 25 fps Time lapse mode

Electronic view finder:- Full HD, OLED eye piece of Camera OEM with up & down swivel movement

Recording memory card -

SSD drives or Cards; each compatible to record 45 mins of the highest available format and the highest available frame rates on the dockable recorder if any,

SSD drives or Cards; each compatible to record 45 mins of the highest available format and the highest available frame rates on the camera body

Card Reader -

Card reader with USB 3.0 or Lightening interface with transfer speed of min.8 Gbps for 3.01above (for Raw files)

Card reader with USB 3.0 or Lightening interface with transfer speed of 400mbps for 3.02 above (for compressed 4k files)

Portable LCD Monitor of Camera OEM or Professional field monitor of reputed OEM to be mounted on cameraFull HD 7 inch LCD monitor with Proprietary connectors

Full HD 7 inch LCD monitor with HDMI and SDI port, HDMI & SDI cable, power cable/ connector and sun hood with camera mount & magic handle OR

The monitor should be powered by Camera. If not, then 2 (two) batteries and 1 (One) battery charger for the monitor should be provded

Camera Support:-

V-mount battery adaptor

Camera Handle (top)

Adjustable shoulder pad with hand grip and on/off switch

I/O connectors & Cables Camera must have following I/O connectors inbuilt or additional dockable attachment of Camera OEM. a) 2 Audio channels with XLR/EP mic input b) SDI video out for Master video & monitor output c) HDMI out d) Gen lock/TC e) DC in f) USB port or SD card slot ( along with supported SD card) for firmware, Camera settings & LUT update g) 2 mtrs. HDMI Cable for monitor h) 2 mtrs. SDI Cable for monitor

Camera Support system and accessories (NOTE: We intend to use our existing Carl Zeiss super 35 Prime Lenses, Block lenses, Angeneiux 25-250 HR zoom lens and 6x6 Arri Matt box on the camera. Camera should support the above lenses and Matte Box.)

a) If a high rise is required for the camera to fit Angeneiux HR 25-250 zoom lens along with ARRI LS-9 support and matt box MB-14 with 19mm rods, then high rise should be provided.

b)Base plate and Bridge plate along with 19mm stainless steel rods(2 nos) of minimum 50cm length

c)All connecting cables

Audio Minimum 2 channel 24 Bit 48 Khz audio recording with line in.

Camera carry case Standard hard case capable with standing high pressure, International ratings of water proofing & locking options with roller wheels and handle.

Software Licensed software for conversion and management of Camera RAW files for post production

Training Basic training on Camera should be provided to Camera Section and Engineers of Films Division.

Warranty Minimum 1 year on site comprehensive warranty or manufacturer warranty whichever is higher

Optional Items

Wi-Fi & Intervalometer The camera should be able to connect to a mobile device or wi-fi remote control with full menu operation and intervalometer for time lapse cinematography.

Camera Battery Compatible V-mount battery (of reputed OEMs only) for the camera with approx.60mins movie recording time with single full charged battery or minimum 140 WH whichever is higher

Dual Battery Charges with AC Adopter Compatible Dual battery charger. (Batteries and charger should be of the same OEM)

Accessories Light weight matt box to accommodate both 4x4 and 4x5 filters with minimum two filter slot, set of clamp on lens facility and mountable on 15mm rods with 4 side flaps.

Counter Weight Counter Weight to balance the camera with heavy lenses.

Camera Carry case Standard Quality soft water proof carry case for the camera

Field Monitor 17 inch to 24 inch LCD Professional 2k Field Monitor

Extended warranty 2 years Extended on site comprehensive warranty on annual basis after completion of warranty