Annuall Repair and Maintenance of Civil work at Sisodiya Rani ka Bagh, Jaipur

Carriage of Building Rubbish Stone Metal grit ballast etc.with a lead of 10 Kms.(G-4.1/4.2)

Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 :Upto 15 cm. thick. (B-6/6.18.1)

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Size 600mm x 1200mm

Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm comfirming to IS : 13755 and IS 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4) (B-7/7.13)

Providing & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade :Ghana teak wood Grade - I. (B-8/8.1.5)

Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.(B-8/8.26)

Providing and fixing steel gate, grating and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide (B-9/9.8)

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 25 mm thick.(B-12/12.2.1)

Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) : Raised and cut pointing.(B-12/12.31.2)

Providing and applying Melamine polish on teak wood work of approved brand and manufacture to give an even shade with two or more coats by compressor including sand papering, wood filler coat etc complete in all respect:

New Surface

Old Surface

Renewing glass panes with wooden fillets wherever necessary:

(a) 4mm thick plain glass panes.(B-13/13.4.1).

(b) 5mm thick plain glass panes.(B-13/13.4.2).

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

Providing and fixing in CM 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry :Size 125 x 100mm(B-15/15.25.2)

Providing and Applying ACRYLIC emulsion polymer waterproofing chemical coating, on over roof on over roof slabs/terrace/balconies/parapet wall etc.with following method/specification: Paint the surface with regular paint brush so as to obtain approximately 0.3mm thickness coating. apply the 2nd coat next day at right angles to the 1st coat so that total thickness of the coating should be approximately 0.6mm coverage by using above formulation will be 40 ft2/ litre of chemical. painted surface does not require any external water curing since chemical will hold sufficient water for curing.After the primer coat Apply 2 coats of modified acrylic emulsion polymer water proofing compound having solar heat reduction properties coating @ 0.330 KG/SQM on the surface of the interval of 3-4 hours. Undulation on the surface is repair before the waterproofing work.

Supply of Labour as per requirment with required Tools & plants

(a) Mason (for plain stone work) 2nd class(Code no.125)

(b) Beldar(Code no.114)

(c) Fitter (grade 1)(Code no.116)

(d) Carpenter 1st class(Code no.111)

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE Part- B Based on PWD BSR 2022 (Sanitary Works) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work).

50 mm nominal size

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.

(a) 110 mm dia(S-3/3.16.3)

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.

160 mm dia

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:

(a) Coupler (socket) - 110mm dia(S-3/3.17.1(ii))

(b) Plain Tee - 110mm dia(S-3/3.17.3(ii))

(c) Bend 87.5 - 110mm dia(S-3/3.17.9(ii))

(d) Door Bend (Top Side) - 110mm dia(S-3/3.17.10(ii))

Supplying & Fixing R.C.C. Manholes covers with frame of approved make (Light duty).

(a) Size 450mm dia(S-3/3.33.2)

(b) Size 600x600mm (Double seal)(S-3/3.33.4)

(c) Size 600x450mm (S-3/3.33.5)

P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity.(S-2/2.26.3)

P & F White Vitreous China Double Syphonic European W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS : 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor.

P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm.

P & F Premium quality Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make as per Engineer-in-charge with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall :

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE Part- C Based on RUIDP SOR 2023 (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Lime Surkhi Plaster 1:2 (1 Lime : 2 Surkhi) including preparation of mortar by traditional practice (by grinding) in coarse for base coarse and subsequent coarse & Loi, tamping, beating, curring till the shrinkage cracks are disappear. The work is to be done with all lead as the work of restoration nature as per Jaipur practice including adding, gur, methi & gugal, on old walls including removal of all old loose and decayed plaster, each coat to be done after 3 days of previous coat. (a) 33 mm thick in four coats(C-3/3.1.1)

Deduct for plaster work if lime kara applying on plaster as finishing coat. 40.11

Providing & applying Lime Kara 1:2 (1lime cream : 2 Zikki powder) grinding mortar with grinding mill/manualy on lime base, on flat surface in two coats. First coat applying 3mm to 4mm. thick and curring properly at least 7 days, second finishing coat done after 7 days of previous coat as per traditional practice. (thickness not more then 6 mm.) 40.19

Providing and laying lime Dhar on roofing as per Rajasthan, Jaipur traditional practice with lime, Surkhi, old lime powder, brick aggregate 12 to 20mm (1:2:2:2) and using Methi, Gur, Hemp, Belgiri etc. including beating and temping 100 to 150mm thick as per specifications. Including dismantling of old detoriated roofing40.29

Providing and fixing double leaf Door wooden shutters made of 1st grade M.P. teackwood as per traditional design (Deshi pattern) planks thickness 40mm and width of Binies, Andheri 50mm and thickness 35mm, including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle etc.) as per existing matching / as per approved design with moulding / carving complete in all respect. M.P teak wood grade Ist40.35.1

40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. Red sand stone(30.28.1)

Khameera Colour Washing as per traditional practice to prepare the Khameera the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding curd Gugal, for non-synthetic colour adding gum (babool gum) as per specification. Then applying prepared solution on walls three to four thin coats as desired finishing. (40.17)

Deduct for khameera work if kangoora / design / lining work not done

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE PART "D" BASED ON NON BSR (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Oiling with linseed oil (two or more coats) on wooden doors & windows and wooden railing at variuas place in Amber Palace including filling of craks & preparation of base with putty etc. painting two coats of antitermite paint by using chemical emulsion as per IS : 10013 (Part III)-1989 and Painting two coats with oil type wood preservative of approved brand complete in all respects as per direction of Engineer In Charge including all leads and lifts.

Removing & refixing of 30-35mm thick sand stone in lime surkhi mortar 1:2 and pointing of flooring with lime surkhi mortar 1:2 including pigment to matching the shade.

Supplying & fixing fine dressed 35mm to 40mm thick "flooring" with white / light pink sand stone (machine grinded surface) machine cut of approved shade set in pattern over 30mm thick base of lime surkhi mortar 1:2 including jointing with lime putty and stone powder with an admixture of pigment, complete in all respect.(C-5/5.20)

Removal and Refixing of Stone Chhaja 50 to 75mm thick stone used to be similar to the existing ones at the site cutting in proper shape and providing interlocking keys in the new as well as old stone for proper bonding including finishing the edges in all respect in lime surkhi mortar ( 1 lime putty : 2 Surkhi)

Please Enable Macros to View BoQ information