Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.7 LAccepted-AOC | L1 | Accepted-AOC RATES ARE FOUND REASONABLE AND THE FIRM BEING L1 BIDDER | |
| 2 | L2₹9.7 L+₹3,381.18 (0.35%)Rejected-Finance OPPOSITE GHOOM DRC PO GHOOM DISTT DARJEELING WB PIN 734 102 | DARJEELING | WEST BENGAL | 734102 | L2 | Rejected-Finance BEING L2 BIDDER | |
| 3 | L3₹9.7 L+₹3,538.88 (0.36%)Rejected-Finance | L3 | Rejected-Finance BEING L3 BIDDER | |
| 4 | L4₹9.8 L+₹4,779.80 (0.49%)Rejected-Finance | L4 | Rejected-Finance BEING L4 BIDDER | |
| 5 | L5₹9.8 L+₹6,595 (0.68%)Rejected-Finance | L5 | Rejected-Finance BEING L5 BIDDER |
| Sl No | Description | Qty | Unit | Darjeeling Enterprises L5 | JALAPAHAR HARDWARE L3 | BIMAL BHATTRAI L6 | RAI CONSTRUCTION L4 | HIRA SINGH L1 | Damdoo Bhutia L2 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for making V-grooves of 10mm wide and 30mm deep or upto the extend of joint/crack present at site over joint/ crack line using electricity operated angle grinder with diamond concrete saw blade and cleaning it by air blower/ vaccum cleaner etc as required. The groove shall be cut on the concrete surface along the joint/crack over RCC structure to be repaired, complete all as specified and as directed by Engineer-in-Charge.
Note: Work to be executed by the authorized applicator of manufacturer who have at least 5 years of working experience with MES in the same field complete all as specified and as directed. | 72 | RM | 188 ₹13,536 | 185 ₹13,320 | 187 ₹13,464 | 190 ₹13,680 | 180 ₹12,960 Lowest | 182 ₹13,104 |
| 2.00 | M&L for sealing of exposed 'V' groove of 10mm wide and 30mm deep with Sikagard 694 F(l) (solvent free epoxy resin based putty) or euivalent product of any other make as approved by CEEC/E-in-C branch, solvent-free, moisture tolerant, thixotropic, two part structural adhesive and repair mortar cum surface levelling mortar, complete all as specified and as directed by Engineer-in-Charge.
Note: Work to be executed by the authorized applicator of manufacturer who have at least 5 years of working experience with MES in the same field complete all as specified and as directed. | 72 | RM | 590 ₹42,480 | 590 ₹42,480 | 588 ₹42,336 Lowest | 588 ₹42,336 Lowest | 590 ₹42,480 | 590 ₹42,480 |
| 3.00 | M&L for Drilling Holes of 12mm dia up to 100 mm deep holes in structural members at the interval of 300 mm in staggered manner or along the joint & crack line in Reinforced Concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm dia NRV (Non Returnable Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fixed inside the hole by applying thixotropic epoxy adhesive SikaDur 31or euivalent product of any other make as approved by CEEC/E-in-C branch to ensure complete sealing and allow curing the system for minimum of 8 Hrs before grouting including nozzle projections, excess putty, if any, over concrete element by grinding, leveling and finishing the external surface, after completion of the work, etc., complete all as specified and as directed by Engineer-in-Charge.
Note: Work to be executed by the authorized applicator of manufacturer who have at least 5 years of working experience with MES in the same field complete all as specified and as directed. | 240 | Each | 385 ₹92,400 Lowest | 395 ₹94,800 | 395 ₹94,800 | 390 ₹93,600 | 390 ₹93,600 | 394 ₹94,560 |
| 4.00 | M&L for injection grouting of construction joints with non shrink cement slurry admixed with epoxy grouting Cebex 100 of M/S Fosroc Chemical /SikaGrout-214 IN or euivalent product of any other make as approved by CEEC/E-in-C branch @ 300 mm C/C including of opening of cracks to a groove of size 12mm X 12 mm, Nozzle at 300 mm C/C including of opening of cracks to be grooved of size 10mm X 10mm fixing of nozzles with fast setting plugging compound Renderoc plug of make Fosroc or Sika Plug of make Sika or euivalent product of any other make as approved by CEEC/E-in-C branch , cutting the extra length of nozzle after grouting all in complete as per manufacturers instructions including necessary scaffolding as required, complete all as specified and as directed by Engineer-in-Charge.
Note: Work to be executed by the authorized applicator of manufacturer who have at least 5 years of working experience with MES in the same field complete all as specified and as directed. | 240 | Each | 780 ₹1,87,200 | 765 ₹1,83,600 | 770 ₹1,84,800 | 770 ₹1,84,800 | 760 ₹1,82,400 Lowest | 765 ₹1,83,600 |
| 5.00 | M&L for applying two coats of SikaTopseal 107 or euivalent product of any other make as approved by CEEC/E-in-C branch inside of the wall & floor of the tank, a two components ready to use polymer modified cementatious coating. First Coat should be applied horizontally and second coat should be applied vertically. The thickness of coating shall not be less than 1.5 mm, complete all as specified and as directed by Engineer-in-Charge.
Note: Work to be executed by the authorized applicator of manufacturer who have at least 5 years of working experience with MES in the same field complete all as specified and as directed. | 135 | Sqm | 760 ₹1,02,600 | 745 ₹1,00,575 Lowest | 772 ₹1,04,220 | 755 ₹1,01,925 | 750 ₹1,01,250 | 750 ₹1,01,250 |
| 6.00 | M&L for applying two coats of Sikagard 67 or euivalent product of any other make as approved by CEEC/E-in-C branch, a water based epoxy coating certified for portable water on all over the concrete surface from inside and applying the first coat by brush allow it to dry for 6-8 hrs and then apply 2nd coat and allow it to cure complete 24 hrs. The coating shall be applied using brush application. The Thickness after two coating should not be less than 500 microns, complete all as specified and as directed by Engineer-in-Charge.
Note: Work to be executed by the authorized applicator of manufacturer who have at least 5 years of working experience with MES in the same field complete all as specified and as directed. | 135 | Sqm | 1,505 ₹2,03,175 | 1,510 ₹2,03,850 | 1,515 ₹2,04,525 | 1,508 ₹2,03,580 | 1,500 ₹2,02,500 Lowest | 1,508 ₹2,03,580 |
| 7.00 | S&F in replacement FRP scale type conventional water level indicator including graduated FRP scale, mounting bracket, FRP coated GI float, indicator pin, counter weight, S S wire Rope, Float Guide pipe, etc., complete all as specified and as directed by Engineer-in-Charge.
Make- RMCO/Daclibac/Milton Ray/ Potter & watts/RDS. | 1 | Each Set | 1,00,200 ₹1,00,200 | 1,00,100 ₹1,00,100 | 1,00,250 ₹1,00,250 | 1,00,000 ₹1,00,000 Lowest | 1,00,000 ₹1,00,000 Lowest | 1,00,000 ₹1,00,000 Lowest |
| 8.00 | S&F in replacement DIGITAL Auto level controller model ALC MK–I including top mounted, non contact ultrasonic level transmitter (probe unit), level indicating controlling box including system incorporated digital stage level, high & low alarm, pump automation etc. as all complete but without wire from transmitter to controlling box as per our enclosed catalogue sensing range upto 5 mtrs including all allied fixing and connecting accessories and testing, complete all as specified and as directed by Engineer-in-Charge.
Make- RMCO/Daclibac/Milton Ray/ Potter & watts/RDS | 1 | Each Set | 2,17,450 ₹2,17,450 | 2,17,352 ₹2,17,352 | 2,17,500 ₹2,17,500 | 2,17,380 ₹2,17,380 | 2,17,350 ₹2,17,350 Lowest | 2,17,350 ₹2,17,350 Lowest |
| 9.00 | M&L for PCC (1:3:6) type C-1 (using 20 mm grade crushed stone aggregate), complete all as specified and as directed by Engineer-in-charge. | 0.94 | Cum | 8,900 ₹8,366 | 8,910 ₹8,375.4 | 8,965 ₹8,427.1 | 8,920 ₹8,384.8 | 8,900 ₹8,366 | 8,898 ₹8,364.12 Lowest |
| 10.00 | M&L for PCC (1:2:4) type B-1 (using 20 mm grade crushed stone aggregate), complete all as specified and as directed by Engineer-in-charge. | 0.94 | Cum | 10,100 ₹9,494 | 9,992 ₹9,392.48 Lowest | 9,999 ₹9,399.06 | 10,000 ₹9,400 | 10,000 ₹9,400 | 9,999 ₹9,399.06 |
Tender Value
₹9.7 L
EMD Value
₹19,340
Closing Date
18 Aug 2025, 6:00 pmClosed
AGE I DARJEELING
AGE I DARJEELING JALAPAHAR CANT DIST - DARJEELING
SPECIAL MAINTENANCE / IMPROVEMENT OF CLEAR WATER TANK AND CONNECTED WORKS AT JALAPAHAR UNDER AGE (I) DARJEELING
2025_MES_721885_1
8148/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
JALAPAHAR
AS PER NIT
9 documents required · 9 mandatory
₹500
AGE I DARJEELING
₹19,340
Yes
16 Sept 2025
22 Jul 2025
20 Aug 2025
22 Jul 2025
18 Aug 2025
8 Aug 2025
Amount
M&L for making V-grooves of 10mm wide and 30mm deep or upto the extend of joint/crack present at site over joint/ crack line using electricity operated angle grinder with diamond concrete saw blade and cleaning it by air blower/ vaccum cleaner etc as required. The groove shall be cut on the concrete surface along the joint/crack over RCC structure to be repaired, complete all as specified and as directed by Engineer-in-Charge. Note: Work to be executed by the authorized applicator of manufacturer who have at least 5 years of working experience with MES in the same field complete all as specified and as directed.
M&L for sealing of exposed 'V' groove of 10mm wide and 30mm deep with Sikagard 694 F(l) (solvent free epoxy resin based putty) or euivalent product of any other make as approved by CEEC/E-in-C branch, solvent-free, moisture tolerant, thixotropic, two part structural adhesive and repair mortar cum surface levelling mortar, complete all as specified and as directed by Engineer-in-Charge. Note: Work to be executed by the authorized applicator of manufacturer who have at least 5 years of working experience with MES in the same field complete all as specified and as directed.
M&L for Drilling Holes of 12mm dia up to 100 mm deep holes in structural members at the interval of 300 mm in staggered manner or along the joint & crack line in Reinforced Concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm dia NRV (Non Returnable Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fixed inside the hole by applying thixotropic epoxy adhesive SikaDur 31or euivalent product of any other make as approved by CEEC/E-in-C branch to ensure complete sealing and allow curing the system for minimum of 8 Hrs before grouting including nozzle projections, excess putty, if any, over concrete element by grinding, leveling and finishing the external surface, after completion of the work, etc., complete all as specified and as directed by Engineer-in-Charge. Note: Work to be executed by the authorized applicator of manufacturer who have at least 5 years of working experience with MES in the same field complete all as specified and as directed.
M&L for injection grouting of construction joints with non shrink cement slurry admixed with epoxy grouting Cebex 100 of M/S Fosroc Chemical /SikaGrout-214 IN or euivalent product of any other make as approved by CEEC/E-in-C branch @ 300 mm C/C including of opening of cracks to a groove of size 12mm X 12 mm, Nozzle at 300 mm C/C including of opening of cracks to be grooved of size 10mm X 10mm fixing of nozzles with fast setting plugging compound Renderoc plug of make Fosroc or Sika Plug of make Sika or euivalent product of any other make as approved by CEEC/E-in-C branch , cutting the extra length of nozzle after grouting all in complete as per manufacturers instructions including necessary scaffolding as required, complete all as specified and as directed by Engineer-in-Charge. Note: Work to be executed by the authorized applicator of manufacturer who have at least 5 years of working experience with MES in the same field complete all as specified and as directed.
M&L for applying two coats of SikaTopseal 107 or euivalent product of any other make as approved by CEEC/E-in-C branch inside of the wall & floor of the tank, a two components ready to use polymer modified cementatious coating. First Coat should be applied horizontally and second coat should be applied vertically. The thickness of coating shall not be less than 1.5 mm, complete all as specified and as directed by Engineer-in-Charge. Note: Work to be executed by the authorized applicator of manufacturer who have at least 5 years of working experience with MES in the same field complete all as specified and as directed.
M&L for applying two coats of Sikagard 67 or euivalent product of any other make as approved by CEEC/E-in-C branch, a water based epoxy coating certified for portable water on all over the concrete surface from inside and applying the first coat by brush allow it to dry for 6-8 hrs and then apply 2nd coat and allow it to cure complete 24 hrs. The coating shall be applied using brush application. The Thickness after two coating should not be less than 500 microns, complete all as specified and as directed by Engineer-in-Charge. Note: Work to be executed by the authorized applicator of manufacturer who have at least 5 years of working experience with MES in the same field complete all as specified and as directed.
S&F in replacement FRP scale type conventional water level indicator including graduated FRP scale, mounting bracket, FRP coated GI float, indicator pin, counter weight, S S wire Rope, Float Guide pipe, etc., complete all as specified and as directed by Engineer-in-Charge. Make- RMCO/Daclibac/Milton Ray/ Potter & watts/RDS.
S&F in replacement DIGITAL Auto level controller model ALC MK–I including top mounted, non contact ultrasonic level transmitter (probe unit), level indicating controlling box including system incorporated digital stage level, high & low alarm, pump automation etc. as all complete but without wire from transmitter to controlling box as per our enclosed catalogue sensing range upto 5 mtrs including all allied fixing and connecting accessories and testing, complete all as specified and as directed by Engineer-in-Charge. Make- RMCO/Daclibac/Milton Ray/ Potter & watts/RDS
M&L for PCC (1:3:6) type C-1 (using 20 mm grade crushed stone aggregate), complete all as specified and as directed by Engineer-in-charge.
M&L for PCC (1:2:4) type B-1 (using 20 mm grade crushed stone aggregate), complete all as specified and as directed by Engineer-in-charge.
Notes - 1. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ. 2. For Serial Item No. 2 to 6 - The firm/Contractor and the authorised applicator must provide warranty of 10 years for their work against the above mentioned serial item Nos.
Damdoo Bhutia (BID ID -3397215)
JALAPAHAR HARDWARE (BID ID -3394167)
RAI CONSTRUCTION (BID ID -3397601)
Darjeeling Enterprises (BID ID -3387027)
BIMAL BHATTRAI (BID ID -3394243)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .