WBPWD/SSEWEC /AED /NIQ-34 /2025-26

Amount

Supplying only the following 1.1 KV grade PVC insulated A/Al. Cable as below: [Finolex/RR Kable/Havells/Gloster/EIC Approved] i).4core 95 sq mm. [LT-Panel to 8Way VTPN-DB(GF)]

ii).4core 25 sq mm. [VTPN-DB(GF) - 3Φ Main Switch DB - M/C room VTPN-DB / Lift]

Laying of cable on wall/surface incl. S&F MS saddles with earthing attachment in 2x10 SWG GI (HD) Wire, making holes etc. as necy. mending good damages and painting. [through inside of the lift well] i). Upto 4Core 25Sqmm with 2x10SWG HD GI Wire. [F1:2b]

ii). 4Core 50Sqmm to 90Sqmm with 2x10SWG HD GI Wire. [F1:2d]

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish i). From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor /pavement/wall etc. [F3:5i]

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 8mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. Size of : 200x50x1.25mm (18SWG)..with 25x6mm angle iron support as per site condition as practicable as possible. [D14:34a]

Supply & Fixing of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 200x50x1.25mm (18SWG)... [D15:34b]

Supply & Fixing of perforated GI cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 200x50x1.25mm (18SWG)... [D15:34c]

Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire. i). Up to 50 sqmm. [F3:6i]

ii). From 70sqmm to 150sqmm. [F3:6ii]

S & F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below: i).4 core 95 sq mm. [F4:7c]

ii).4 core 25 sq mm. [F4:7c]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. i).4 core 95 sqmm. [F5:8b(xviii)]

ii).4 core 25 sqmm. [F5:8b(xiii)]

Supplying and fixing double door Vertical-TPN-MCB DB housing for MCCB incomer and TP-MCBs as outgoing with IP-43 protection, concealed in wall after cutting the wall & mending good the damages to original finish & necy. wall matching paint as required or total establishment on angle iron frame on wall incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [D11:15] i). LEGRAND EKINOX : 8Way Upto 160A,Enclosure (607914).....(At GF)/ABB/Havells/Schneider

ii). LEGRAND EKINOX : 4Way Upto 160A,Enclosure (607913)……(At 3Nos. Machine Room)

Supplying and fixing double door SPN-MCB DB housing Enclosure only suitable for DP-MCBs as incomer and SP-MCBs (10kA'C'-curve,6A-16A) as outgoing with IP-43 protection with cable ties for cable/wire management, concealed in wall after cutting the wall & mending good the damages to original finish & necy. wall matching paint as required or total establishment on angle iron frame (25mmX6mm) on wall incl.inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as required inside the box. 2+8 way Legrand Enclosure (607711). /Havells/Simens/ABB [D9:13] [3Nos For Machine Room & Remaining for 3Φ emergency switching at (GF lift Corridor)]

Supply and fixing 415V/240V, of following rating "C"-curve MCBs/MCCBs (Legrand/Havells/Simens/ABB Make) of Breaking capacity 10kA/35KA on din rail in existing VTPNDB/TPN-DBs/SPN-DBs and necy. connection as required. i).125A(35kA)FP MCCBs. [D8:10]

ii).40/63A (10kA) TP MCBs. [D6:07]

iii).6-32A (10kA) SP MCBs. [D6:07]

iv).63A (10kA) FP Isolators. [D5:06]

v).32A (10kA) DP Isolators. [D5:06]

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [E6:22]

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Finoex/Havells/EIC Approved) in 20mm size PVC rigid conduit 'FR' (Precision make-HMS/MMS), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch(Anchor Make) fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. laminated bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. neccy metal inspection box of size 175mmx100mmx65mm, making earthing attachment,incl. painting the MS box and mending good the damages to original finish. [For Machine Room & Passage] i).Average run 6 mtr. [E14:2b]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex/Havells/Gloster EIC Approved) in 20/32mm size PVC Rigid Conduit 'FR' (Precision make-HMS/MMS) incl. necy. fittings as required. i)4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC...

ii)2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC. [ E14:1a(iv)]

iii)2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC. [ E14:1a(ii)]

iv)2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC. [ E14:1a(i)]

Finishing of the PVC insulated wire ends by socketing with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. i). 10sq mm. [F5:9(iv)]

ii). 6sq mm. [F5:9(iii)]

iii). 4sq mm. [F5:9(ii)]

iv). 2.5sq mm. [F5:9(i)]

v). 1.5sq mm.

Supplying & Fixing bulk head light fitting (Havells make) with diecast aluminium housing & frosted glass on wall/ceiling incl. S&F 9watt LED lamp complete set. [K1:29]+[C2:13]+9W LED

Supply and delivery of commercial type indoor mounting retrofit rail for TWIN/SINGLE LED tube light frame complete with all accessories as required. i).[PHILIPS-TMC-501-P-2XT-LED-P3242/Eqv Jaquar/Surya EIC Approved]

ii).[PHILIPS-TMC-501-P-1XT-LED-P3241/Eqv Jaquar/Surya EIC Approved]

supply and delivery of 1No. 4', 18W LED Tube]. [Philips: Master Led Tube 1200mm 18W-865 T8 IND -2100 lumen/ Eqv Jaquar Model/Surya EIC Approved] for above tube frame fittings.

Fixing only single /twin LED tube light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener & flexible cord. [C2:14b]

Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil. [G1:1b]

Extra for treatment of soil by using salt & charcoal or coke for plate electrode. [G2:3b]

Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 x 19/10 stranded GI (Hot Dip) wire (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including socketing at both ends of stranded GI (Hot Dip) wire by crimping sockets/ thimbles and S & F 40 mm dia GI pipe (ISI-M) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts. [G2:2c]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. [G2:3a]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall incl. providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [G2:4c]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. i). 10 SWG. [For Cable Tray Running Cable double running] [G2:5iv]

ii). 4 SWG. [Earth Electrode to Machine Room Earth Bar] [G2:5i]

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. [G3:d]

Supplying & fixing medium gauge GI Pipe (TATA-Medium) Protection with necessary fittings and jointing materials as required. i).40mm dia [F6:11c]

M/S K M ENGINEERING (BID ID -7614268)

DURGAPUR POWER (BID ID -7732358)