Installation of office Chair Table and Almirah for Chamber Anti Chamber Toilet and Office room of the Honble Chairman of Police Complaints Authority at the ground floor of Standard Assurance Building BBD Bag Kol-1

Amount

Installation of High Back Chair as per the following specifications. SEAT/BACK ASSEMBLY: The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with stitched cover and moulded High Resilience Polyurethane foam of Density 45+2 kg/m3,and hardness load 16 + 2 kgf for 25% compression.The stitched cover should be made from spacer fabric and leatherette. Cushioned back soaws should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.160.0128cm. It upholstered with spacer fabric and leatherette. Seat SIZE: 47.0cm. (W)x48.0cm. (D). BACK ASSEMBLY: The Cushioned back is made of PU m with ineitu moltHMSEP W ound Ta02 16+0 01280m tunholetorod with cnand lonthoro Foam with insitu molded MS E.R.W Round Tube of size 1.9+0.03cm x 0.16±0.0128cm. It upholstered with spacer fabric and leatherette. BACK SIZE: 45 cm. (W) x75.5 cm. (D).ARMRESTS: The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81+0.03 cm x0.2+0.01 cm thk MS E.R.W tube. The armrest height adjustable up to 6.5+0.5cm in 5 steps.The Armrest structure should be powder coated (DFT 40-60 micron). ACTIVE BIO-SYNCHRO mechanism: The adjustable adju titting mechanism should be designed with the following features: 360° revolving type. Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. Tilt tension adjustment can be operated in seating position. 5-position Tilt limiter giving iala sits nole Santhaele itint thicouldh mne Amiu option of variable tilt angle to the chair. Seat/back tilting ratio of 1: 2. The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT Seat depth adjustment should be integrated inthe seat through a sliding mechanism. Seat depth powder coated. SEAT DEPTH ADJUSTMENT Seat depth adiustment should be integrated in the seat through a sliding mechanism. Seat deoth adjustment range should be of 6.0+0.5 cm. ADJUSTABLE BACK SUPPORTBack Frame should be connected to the Up/Dn mechanism housed in Plastic Tspine. It can be adjusted in the the rangenge ofof 7.42+0.5 7.42+0.5 cmfor for the the comfortable comfortable back back support to suit individual need. PNEUMATIC HT. ADJUSTMENT The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. PNEUMATIC HT. ADJUSTMEVT: The pedestal is injection moulded in black 33% glass-filled Nylon 66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.1+0.5cm. pitch-center dia.(76.1±1.0 em With castors TWIN WHEEL CASTOR:5 Nos twin wheel castors should be iniection moulded in plastic having 60+0 1cm wheel Diameter cm. With castors.) TWIN WHEEL CASTOR: 5 Nos. twin wheel castors should be injection moulded in plastic having 6.0 0.1cm wheel Diameter land assembled to pedestal. Overall Dimensions of Chair: Seat Height -44.4-54.4cm. Height- 113.6-131.1cm. Width-76.1 cm and Depth-76.1 cm. The product should have Greenguard (By UL), Indoor Advantage Gold, GRIHA v.2019 & SVAGRIHA, BIFMA Level-2 & Greenpro Certification. (Model Gidrej Versa Neo High back Chair or similar)

Installation of Visitor Chair as per the following specification. SEAT/BACK ASSEMBLY: The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with stitched cover and moulded High Resilience Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.The stitched cover should be made from spacer fabric and leatherette. Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with spacer fabric and leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D). BACK SIZE : 45 cm. (W) x 60.5 cm. (D). Visitor TUBULAR FRAME: The powder coated (DFT 40-60 micron) tubular frame should be cantilever type & made of 02.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube.The back connected to frame through powder coated (DFT 40-60 micron) high pressure die cast connector piece. Overall Dimensions of Chair: Seat Height - 44.8cm. Height - 99.5cm. Width-60.9 cm and Depth-64.3 cm. The product should have Greenguard (By UL), Indoor Advantage Gold, GRIHA v.2019 & SVAGRIHA, BIFMA Level-2 & Greenpro Certification. (Model Godrej Versa Neo Visitor Chair or Similar)

Installation of Main Table 1800W with ERU & Pedestal as per the following specifications. The Main table shall be of size 1800 Width mm x 900 mm Depth x 750 mm height. Main Top: Made of 70mm Thick (±1mm) combination of MDF, Particle Board and Solidwood (batton construction) with top Veneer face coated with PU. Side Panel: Made of 60mm Thick (±1mm) combination of MDF, Particle Board and Solidwood (batton construction) with top Veneer face coated with PU. Modesty Panel: Made of 18mm Thick (±1mm) Particle Board with Veneer face, coated with PU. All thickness edges are 2mm edge banded with matching lipping. Top Panel: Made of 18mm Thick (±1mm) Particle Board with Veneer face, coated with PU. Side Panel: Made of 18mm Thick (±1mm) Pre-laminated Particle Board. Door Panel: Made of 18mm Thick (±1mm) Particle Board with Veneer face, coated with PU. Other Panel: Made of 18mm Thick (±1mm) Pre-laminated Particle Board. Castor: Dia - 40mm & Height 55mm (Lockable - 3 no.s & Non-Lockable - 3 no.s). All thickness edges are 2mm edge banded with matching lipping. Top Panel: Made of 18mm Thick (±1mm) Particle Board with Veneer face, coated with PU. Side Panel: Made of 18mm Thick (±1mm) Pre-laminated Particle Board. Drawer Front: Made of 18mm Thick (±1mm) Particle Board with Veneer face, coated with PU. Castor: Dia - 40mm & Height 55mm (Lockable - 3 no.s & Non-Lockable - 2 no.s). All thickness edges are edge-banded with matching lipping. All Panel Edge Banding Thickness. 2mm & for Drawer 1mm. The OEM should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (All ISO certificate must be from NABCB/IAF recognized accreditation body), IGBC Platinum, AIOTA certification. (Model Godrej Impress 6 ft. Table with ERU or Similar)

Installation of Storwel Plain (1981Hx916Wx486D), Overall size Shall be 916mm(W)x486mm (D) x1981mm(H) with welded construction. It should have the shelf thickness of 0.7mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA‘D’ grade high yield strength asper IS:513. It should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall havea Uniformly Distributed Load Capacity of max 40Kg. It should also have a M10 Screw type Leveller with Hexplastic base. The finishing shall include Epoxy powder coated to the thickness of 50microns (+/-10). Plenty of colour options and shelving options shall be available. (Model Godrej Storwell plain or similar)

WELL DECOR (BID ID -6920526)

Decor 9 (BID ID -6929329)