Estimate For Restoration Of Damage Direct Outlet At. 122.700 Km Right Side Of Kandi Canal Stage-2.

Amount

WATER SUPPLY

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of ewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

Earth work upto 1.5 m. Depth for

All classes of soil except rock

Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.

C.I Single air valve screwed (Size 50mm)

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

(a) Size 0.6 m. x 0.6 m.

(b) Size 0.9 m. x 0.9 m.

Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

Capacity of Air compressor 300 cfm at 250 PSI

BRICK WORK

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

PLASTERING & POINTING

12.5 mm thick cement plaster 1:4

Cement rendering on plaster 1mm thick

CONCRETE

1:2:4 Cement concrete

mixing by mechanical means using concrete mixer volumetric type

STEEL AND IRON WORK

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete 12mm of steel

Providing, Laying , fixing & jointing of uP.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. pipe of 2.5 Kg. /sqcm 160mm

Providing, Laying , fixing & jointing of uP.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. pipe of 2.5 Kg. /sqcm 180mm

Providing, Laying , fixing & jointing of uP.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. pipe of 2.5 Kg. /sqcm 250mm

Providing, Laying , fixing & jointing of uP.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. pipe of 2.5 Kg. /sqcm 280 mm

Providing, Laying , fixing & jointing of u P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. pipe of 2.5 Kg. /sqcm 315mm

Providing, Laying , fixing & jointing of u P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. pipe of 2.5 Kg. /sqcm 400 mm

Providing & fixing ISI Marked . Alfa Valve 160 mm

Providing & fixing ISI Marked . Alfa Valve 180mm

Providing & fixing uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 160mm

Providing & fixing uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.180mm

any other item

Deepak Kumar Beetan