PETTY REPAIRS AND REPAIR TO WATER PIPES CLEANING OF TANKS AND RELATED WORKS TO CERTAIN BLDGS AND REPAIR TO FENCING HARD STANDING DRAIN ETC AND MISC BR WORKS IN OUTSIDE POCKET AREA AT AF STATION GWALIOR

Amount

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and 'S' or 'P' traps (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified and directed.

S&F in repairs viterous China WC pan pedestal pattern white (excluding flushing cistern and flush pipe) but incl & connecting to trap set & concrete for making good to floor complete all as specified and directed.

S&F in repair plastic water closet seat cover, Black in colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fix in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.

S & F in repair Vitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps, waste, chain and plug and porcelain stopper but incluing brackets, and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Taking down old cement / lime plaster on brick or concrete surfaces etc including racking out joint, hacking for key screbbing down with water etc.complete all as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. and segregation serviceable bricks, keep them staking for re use complete all as directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc,complete all as specified.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 etc,complete all as specified.

All as per Srl item No 10 hereinbefore but except brick work built in Cement Mortar (1:4) complete all as directed. (Note :- Serviceable bricks shall be obtained from Srl item No 8 hereinbefore for re-use)

M&L for 15mm thick rendering cement plaster in Cement Mortar 1:4 on fair faces of brick work or concrete surface, mixed with water proofing compound as per manufacturers instructions, finished fair & even without using extra cement complete al as specified. Note: Water proofing compound shall be measured and paid separately under respective item of BOQ.

M&L for preparation of new plaster on brick wall surfaces and applying two coats of cement base paint over a coat of primer of same make on walls complete all as specified.

Taking up or down 15mm bore steel tubing and connections, including seggregation serviceable pipes cleaning for re-fixing or removal unserviceable pipes from site complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including seggregation serviceable pipes cleaning for re-fixing or removal unserviceable pipes from site complete all as specified and directed.

Re-fixing of old steel GI tubing, 15mm bore and connections in new or old position (walls, ceiling, floors etc) with and including all new fittings complete all as specified and as directed.

Re-fixing of old steel GI tubing, 20mm bore and connections in new or old position (walls, ceiling, floors etc) with and including all new fittings complete all as specified and as directed.

S&F GI tubing 15mm dia bore medium grade with and including all fittings ISI marked and fixed to wall, floor and ceiling etc complete all as specified and as directed.

S&F GI tubing 20mm dia bore medium grade with and including all fittings ISI marked and fixed to wall, floor and ceiling etc complete all as specified and as directed.

Cleaning and removing all scale and dirt etc from over head water tanks of capacity exc 250 Ltrs but not exc 500 Ltrs and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed.

Cleaning and removing all scale and dirt etc from over head water tanks of capacity Exc 500 Ltrs but not exc 1000 Ltrs and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed.

S&F rotational moulded polythene water storage tank of capacity 500 litres (Cylindrical/vertical with closed top), double layer construction, ISI marked, hoisted & fixed in position with and including light grade over flow pipe 450mm, waste pipe 600mm long with fitting etc. including of 20 mm dia, ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, 20mm bore minimum weight 210 gms including dismantling / taking out of old water tank of capacity of exc. 250 litres but not exc. 500 & removing to where directed complete all as specified and as directed.

S&F rotational moulded polythene water storage tank of capacity 1000 litres (Cylindrical/vertical with closed top), double layer construction, ISI marked, hoisted & fixed in position including light grade over flow pipe 450mm, waste pipe 600mm long with fitting etc. including of 20 mm dia, ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, 20mm bore minimum weight 210 gms including dismantling / taking out of old water tank of capacity of exc. 500 litres but not exc. 1000 & removing to where directed complete all as specified and as directed.

S&F 20 mm ball/float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and as approved by GE.

S&F in repairs 20 mm ball/float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and as approved by GE.

Repair leakage of 15 mm bore CP bib tap/ Pillar tap/ stop cock by replacing of necessary brass spindles as required complete all as specified and directed.

Repair leakage of 15/20 mm bore concealed stop cock by replacing of necessary brass spindles, half round turn or full round turn as required complete all as specified and directed.

Refixing old flushing cistern of any capacity complete with bend and bend pipe and connecting to WC after making it functional by adjusting the level of float valve, replacing rubber washer etc complete all as specified and directed.

S&F in repair brass chromium plated hand faucet with flexible pipe of length not less than 1.00 M (Minimum) fixed for EWC/ IWC suitable for 15 mm bore pipe complete all as specified and directed.

S&F in repair PTMT waste coupling 32x100 mm in size for sink complete all as specified and directed.

S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S & F in repair Bib taps, 15 mm dia, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S & F in repair, fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pane, incl hacking out old broken glass pane of any thickness and size complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, completed all as specified and directed.

Supply and fixing of rubber beading 40mm strip in bottom of door complete all as specified and directed.

S&F in repair mild steel mortice lock, double handle, vertical type, 06 levers for door complete all as specified and directed.

Easing of wooden/ aluminium door shutters, any size, for easy closing/ opening and tightening of hinges or changing the position of hinges, adjusting of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Easing of window shutter, kitchen cup board shutters, show cause shutter drawer including fixing of screws, adjusting handles, knob, tightening of piano hinges including misc small adjustments complete all as specified and directed.

S&F fancy type brass chromium plated wall mixer with and including Telephonic shower arrangements & with pipe bend 3-in-1 screwed down suitable for 15 mm bore GI pipe complete all as specified and directed. Make: Prayag/ Jaquar/Hindware

S&F in repair of fancy type sink mixer brass chromium plated screwed down of 15mm bore complete all as specified and directed. Make: Prayag/ Jaquar/Hindware

S&F in repair of fancy type overhead shower with arm swivel joint chromium plated screwed down of 15mm bore complete all as specified and directed. Make: Prayag/ Jaquar/Hindware

S&F in repair center hole basin mixer brass, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks & fly nuts for iron pipe of 15mm bore complete all as specified and directed. Make: Prayag/ Jaquar/Hindware

S&F in repair of vitreous china wash down water closet pan wall hung snow white with extened P trap including vitreous china flush cistern with twin flush and seat cover connection to drain flush pipe and anti syphonage pipe complete all as specified. [Make CERA cat Part No -2035 (CLAIR) for EWC wall hung , cat Part No - 2115,2235 for flush cistern and cat Part No - 2315 for seat cover or Hindware/Parryware as approved by GE

S&F in repair internal fittings Kit complete for vitreous china flush cistern with twin flushof complete all as specified and directed. Make -: CERA Cat Part No - 2115,2235 or Hindware/Parryware as approved by GE

S&F in repair brass, chromium plated soap dish complete all as specified and directed.

S&F 5mm thick beveled edge best quality looking mirror of size 600x450 mm with 30 mm PVC beading all around the glass, mounted over 3mm thick PVC sheet or 4mm thick AC bldg board, complete all as specified and directed.

S&F front glass shelf 8 mm thick (Chrome finish) of size 300mmx150mm, fixed with and including chromium plated brass screws and wooden/ plastic cleats, design and pattern approved by GE complete all as specified and directed.

S&F corner glass shelf (Set of Three) 8 mm thick (Chrome finish) of design and pattern as approved by GE, fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

S&F in repair high quality plastic bathroom cabinet of size 550x342x125mm consisting front looking mirror and four to five inner compartments fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed. Note: Design and pattern of cabinet shall be approved by GE.

S&F in repair tank cover black (With locking arrangements as per exisiting) for water storage tank of capacity 500 Litres to 1000 Litres complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying one coat of white wash, complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying two coats of white wash, complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying one coats of white wash, complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, mass and effloresent salts and treating out greasy spots and applying one coat of cement base paint, complete all as specified.

M&L for preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, mass and effloresent salts and treating out greasy spots and applying one coat of exterior emulsion wall paint on bands/facia of external wall surface of brick work or concrete wall etc, complete all as specified. (Make/Brand : Apex Altima from Asian paint or other brand Berger/ Shalimar)

M&L for removal of complete existing treatment from old deoreted surfaces of walls and preparing surfaces by rubbing/ sanding and applying a coat of primer over and including a thin layer of wall care putty complete all as specified. Make wall care putty : Asian/JK/Birla

M&L for applying two coats weather proof exterior emulsion paint on newly prepared surfaces of wall complete all as specified and directed. Make/Brand : Apex Altima from Asian paint or other brand Berger/ Shalimar

M&L for applying two coats of oil emulsion distemper on putty prepared surface of wall etc, complete all as specified and directed. Note: Shade of distemper will be decided by GE

M&L for preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, mass and effloresent salts and treating out greasy spots and applying one coat of oil emulsion distemper on old decorated surface of wall etc, complete all as specified.

M&L for preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, mass and effloresent salts and treating out greasy spots and applying two coats of plastic emulsion paint on old decorated surface of wall etc, complete all as specified.

M&L for applying one coat of synthetic enamel paint over old painted surface of wood work of any description over 10 cm width or grith including preparation of old surfaces complete all as specified.

All as per Srl item No 63 hereinbefore but applying one coat of synthetic enamel paint on steel surface etc, complete all as specified.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on old works with one or more coats complete all as specified and directed.

M&L for preparation of old surfaces of wall of any description including removal of existing treatment and applying upto 2 mm thick layer of wall care putty to give a uniform finish complete all as specified and directed.

M&L for casting Plaster of Paris corners/ moulding in corners or covering to electrical appliances as required at site including moulds and reinforcing fiber of existing type / shape complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exc 2.5 Km from the starting point complete all as specified and directed.

M & L for cement concrete type B1 1:2:4 (20mm graded stone aggregate ) on roof kerbs and like rounded or chamferred on edges etc, complete all as specified.

Demolition of PCC in ground floors and pavings not exc 15 cm thickness below or above ground level and removing the debris to a distance not exc 2.5 Km from the starting point. Complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, mass concrete etc complete all as specified.

M&L for sand filling under floors or in foundation including watering and consolidation etc complete all as specified and directed.

Dismantling of fencing wire mesh, any type and remove from site of work complete all as directed.

Dismantling of sunken position of interlocking paving blocks and re-fixing of old interlocking/ paver blocks of any thickness and size after repairing/ making good the under layers i.e. sand and sub base. Complete all as directed (Note : Sand cushioning and sub base will be measured seperately)

M&L for 60mm thick machine pressed,coloured, glossy finish(rubber moulded) precast cement concrete interlocking pavers/ tiles Grade M-35 made with grey cement and pigment any size, pattern and shape as approved by GE, laid dry over sand cushion in patterns with different colour paver block /tiles complete all as specified and directed. (Note : Sand cushioning and sub base will be measured seperately)

Dismantling of old posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground, complete all as directed.

All as per sl item No. 76 hereinbefore but embedded on natural ground. Complete all as directed.

M &L for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 10cm long and dia of bolt etc, complete all as specified.

S&F in repair galvanised 2 stand, steel barbed wire 2.24 mm dia barbed with 2mm dia bards at 75mm spacings and straining and fixing to any type of standerd rails straining bolts, including, seuring or tying at crossings with and provision of galvanised mild steel wire, staples etc. complete all as specified. (Note :- Each line to be measured)

Supply only galvanised chain link fencing of size 100 x 100mm aperture and dia of wire of any size or type as approved by Engr-in -charge etc, complete all as specified. (Note :- (i) Fixing charges will be measured and paid separately under relevant item hereinafter. (ii) Weight of frame will be ascertained by the BOO before incorporation in work.)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified.

M&L for plain cement concrate1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in foundaion filling etc, complete all as specified.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.complete all as specified

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel/iron surfaces not exceeding 10cm width or girth.complete all as specified.

M&L for 15mm thick rendering cement plaster in Cement Mortar 1:4 on fair faces of brick work or concrete surface finished fair & even without using extra cement complete al as specified.

M&L for 15mm thick rendering on brick work or concrete surface on wall in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

M&L for 10 mm thick rendering on fair faces of concrete surfce in Cement Mortar (1:3) as in ceiling finished even and smooth without using extra cement as in ceiling complete all as specified.

M&L for preparing newly plastered or unplastered surfaces of wall and applying three coats of white wash, complete all as specified.

M & L for applying three coats of white wash on ceiling of new plastered surface, complete all as specified.

M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to grade Fe.290. complete all as specified.

M&L for 0.63mm thick plain, black, mild steel sheeting, in ridges,hips, valley gutters,drip and straight flashings (length and girth as fixed)etc complete all as specified.

M&L for Mild steel work wire netting of galvanised steel wire, 1.40mm dia and 25 mm mesh/ aparature etc complete all as specified.

Dismantling old plain or corrugated Asbestos cement sheeting in roof coverings etc and remove materials from site of work complete all as directed.

Dismantling framed trusses not exc 10 M Span complete all as specified and directed.

Dismantling of timber scantling (Unframed Work) 40 sqcm and over in section, in any position as in framed work complete all as specified and as directed.

M&L for Rolled mild steel section confirming to Fe 410-W as in main and cross beams, hip and jack rafters, purlins ,hip and purlin where connected to common rafters fixed with angle cleats or other connecting plates etc including cutting to reqd length notching , drilling, fittings , rivetting & or welding or connecting with bolts & nuts etc and fixing in true posotion etc complete all as specified.

M&L for Pre-painted galvalume alu. Zinc coating GI based corrugated steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in roof covering fixed using hot dip galvanized self drilling and self tapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces)

All as per item no 98 here in before but plain sheet as in ridges etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.

M&L 25 mm thick cement concrete 1:2:4 (12.5 mm graded stone aggregate ) type B-0 as in levelling course in floors, complete all as specified.

M & L for premium quality coluored Glazed ceramic tiles of size 450 x 300 x 7 mm thick desined/digital of approved colour, as in vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, ver and including 10mm thick screed bed in cement mortar (1:3) complete all as specified.

M&L for premium quality non skid, coloured ceramic tiles 7-8 mm thick desined/digital & approved colour (square/rectangular) area of each tiles exc 0.06 but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of coloured tiles over & includind 15 mm thick screed bed or bedding layer in Cement Mortar (1:6) complete all as specified.

M&L in repairs Granite of 18mm to 20mm thick (of any type) work (table rubbed/moulding and polished) in steps, jambs, pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm screed bed in Cement Mortar 1:4 complete all as specified.

Dismantling wall and ceiling boards of any type, thickness and description including cover fillets and snap grid of any type and description complete all as specified and directed.

S&F HPSC pre-prime non asbestos fiber cement building board (E-classic) decorative finish fixed to aluminum or MS galvanised snap grid frame work with hold down clips in ceiling complete all as specified.

S&F suspended false ceiling grid system of size 600 x 600 mm with main runner of size 32 x 24 x 0.8 mm, cross tee of size 26 x 24x 0.80 mm and wall angle of size 22.2 x 22.2 x 0.65 mm in ceiling suspended @ 1.2m c/c both way with 1.60 mm dia GI wire fixed with steel dash fasterers or from purlin of roof with butterfly clips hold down etc, complete (main runner/ cross tee / wall angle of MS powder coated) as per manufacturere instruction complete all as specified.

Refixing suspended false ceiling snap grid of any description (Aluminium or GI) after carrying out necessary minor repairs to damaged parts of snapgrid and replacing the damaged parts of snap grid with new ones of the same description to match with existing complete all as specified and directed. Note: The quoted rates are inclusive of providing new hold down clips and GI wire.

M&L for refixing false ceiling bord of any thickness and description to existing snap grid including applying two coats of oil bound distemper over a coat of primer after preparation of surfaces complete all as specified and directed.

Disconnecting existing water storage tanks of capacity exc. 250 Ltr but n. exc 500 Ltrs each for repair works and refixing the same tanks in the same postion after the reapir works is carried out complete all as directed. (Note :- The work also includes making the connections of tanks leak proof by replaceing the damaged /rusted GI fittings, refixing of float valvaus and like).

S&F in repair Galvanised iron concertina wire of coil dia 610 mm, blade thickness 0.50mm, blade length 19 mm, wire thickness 2.50 mm and streching ability upto 8 M complete all as specified and directed.

S&F 40 mm thick pre cast cement concrete jallies made out of using cement concrete 1:2:4 Mix, type B0 (Using 12.50 mm graded stone aggregate) set in CM 1:6 including all mouldings, chamfers, weathring, throating etc complete all as specified and directed.

S&F in repair Dholpur sand base stone 300 mm wide of thickness 30 mm, laid over and including 20 mm thick screed in cement mortar 1:6 complete all as specified and directed.

S&F in repair Dholpur sand stone jallies 25 to 30 mm thick with cement mortar 1:4, machine cut edge, uniform colour of eac stone jallies of size 3'x2' fixed in between the post, design as approved by GE complete all as specified and directed.

NOTE:- Site clearance of materials- All demolished material obtained from dismantling/demolition items shall be deposited at place shown by Engr-in-charge properly spread and levelled and site to be cleaned to the entire satisfaction of Engr-in-charge otherwise panel recovery to a sum of Rs. 10000.00 be deducted from dues without any prior intimation.

M/s Pal Construction

J.N.R. Engineers and Builders

Om Electricals

GURU KIRTH BUILDERS

SHRI RAM CONSTRUCTION

M/s Kishan Construction Company

M/S Rakesh Verma