Fire Fighting Facilities

SUMMARY

FIRE WATER PUMP HOUSE

FIRE HYDRANT SYSTEM

HYDRANT ACCESSORIES

CONVENTIONAL FIRE ALARM SYSTEM

PORTABLE FIRE EXTINGUISHERS

SIGNAGES

CIVIL & MISCELLANEOUS

FIRE WATER STORAGE TANK

OIL COOLED DISTRIBUTION TRANSFORMER - 630 KVA

COMPREHENSIVE ANNUAL MAINTANENCE CONTRACT FOR 2 YEARS

Description of Work / Item(s)

Amount

OIL COOLED DISTRIBUTION TRANSFORMER - 630 KVA

630KVA, Oil type Transformer, OLTC Transformer SITC of 630 KVA, 11 KV/433 v, 3 phase 50 HZ, H.V. & L.V Cable Box Type, Step Down Transformer, ON AN,Copper Winding, On Load Tap Changer having 17 Tap Position (+9.375% to -15.625%) in steps of 1.5625% and Wall mounting RTCC Panel, with all relevant accessories shall be provided confirming to IS 1180/2014,Including first filling of oil and as per your Specification.

HT PANEL WITH ADOPTER PANEL SITC of HT Panel, Incomer: 25 KA 11 KV 630A TP VCB D/O TYPE with O/S,S/C,E/F. Releases fitted with complete with incomer, bus bar, protective fuses, indicating lamps with interlock facility with bottom/top entry with foot mounting type complete with all accessories.

Attachment to Panel - SITC of panel for below mentioned pumps 1000A Main Bus bar Al Incomer: 1-1250A 4P 50KA MDO ACB Bus coupler: 1-1250A 4P 50KA EDO ACB Releases fitted with complete with incomer, bus bar, protective fuses, indicating lamps with interlock facility with bottom/top entry with foot mounting type complete with all accessories.

3.5 core x 300 sq.mm Armoured Aluminium Cable FRLS, XLPE insulated, PVC outer sheath, steel Armoured Cable. (Transformer to MCC Panel) & (DG Relocation)

3.0 core x 120 sq.mm Armoured Aluminium Cable F11KV (E/UE) Grade XLPE Aluminium conductor, PVC sheathed, armoured cable confirming to IS 7098, of earthed system of following size in the existing Masonary Open Duct as required.[ From Supplier HT Gear to Consumer HT Gear and to Transformer]

RELOCATION OF DG Dismantling, Shifting & Re Erection of DG (Substation Inside room to Outside open area) including all accessories like(cable,Exhaust Pipe,Cladding, Earthing,Earth Pit,termination with Existing Panel & Include Civil activites) Includes above Testing and Commissioning Charges for OEM Engineer

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 garde and GGBS 123Kg per cum for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering, shuttering and reinforcement but including curing etc. as per standard specification and as directed by the Board officers complete. (Size:- L-8M X W-2M X H-0.5M)

Transformer Foundation bed Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 garde and GGBS 123Kg per cum for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering, shuttering and reinforcement but including curing etc. as per standard specification and as directed by the Board officers complete. (Size:- L-6M X W-6M X H-0.5M)

Description of Work / Item(s)

Amount

Comprehensive Annual Maintanence Contract for 2 Years for Fire Protection system for the followings areas, 1.Truck Parking 2. ERS Berth 3. Finger Jetty 4. Tank truck parking area 5. Car Parking 1,2 & 3 6. GCB – I 7. GCB - II

Manpower Deputation for Operation & Maintenace of Installed Fire Fighting System after DLP Period (1st year)

Fire Fighting Engineer (per month) - (1No X 12 Months)

Technician (per month) - (3 No's X 12 Months)

Semi Skilled Labour (per month) - (3 No's X 12 Months)

Comprehensive AMC for 1st year

Manpower Deputation for Operation & Maintenace of Installed Fire Fighting System after DLP Period (2nd year)

Fire Fighting Engineer (per month) - (1No X 12 Months)

Technician (per month) -(3 No's X 12 Months)

Semi Skilled Labour (per month) - (3 No's X 12 Months)

Comprehensive AMC for 2nd year

Description of Work / Item(s)

Amount

FIRE WATER PUMP HOUSE - PUMPING EQUIPMENTS (Considering Positive Suction)

SITC of Diesel Engine Driven pump set having following capacity with complete Guard,base frame,V-Belt, foundation bolts,initial filling of Lubricant,Cooling oil. Type: Horizontal Split Casing centrifugal pump Flow Rate: 410 Cu.m/hr. Rated Head: 105 mtrs Speed: 2300 RPM Engine Cooling System: Radiator Cooled Location: Fire Station Material of Construction:Casing: Cast Iron Impeller: Bronze LTB2 Neck Ring: Bronze LTB5 Shaft: SS 410 to ASTMA 276 GR 410 Shaft Sleeve: SS 410 to ASTMA 276 GR 410 Base Frame: MS Sealing: Gland Packing *Pump shall be capable of furnishing not less than 150% of rated capacity at a head not less than 65% of the rated head. The shut off head shall not exceed 120% of rated head.

Electric Chain Hoist with rail 5MT with Remote Control Operation for inside the pump house (Location: Fire Station)

SITC of Diesel Engine Driven pump set having following capacity with complete Guard,base frame,V-Belt, foundation bolts,initial filling of Lubricant,Cooling oil. Type: Horizontal End suction Pump. Flow Rate: 171 Cu.m/hr. Rated Head: 88 mtrs Speed: 2150 RPM Engine Cooling System: Radiator Cooled Location: Container Parking Yard Material of Construction: Casing: Cast Iron Impeller: Bronze LTB2 Neck Ring: Bronze LTB5 Shaft: SS 410 to ASTMA 276 GR 410 Shaft Sleeve: SS 410 to ASTMA 276 GR 410 Base Frame: MS Sealing: Gland Packing *Pump shall be capable of furnishing not less than 150% of rated capacity at a head not less than 65% of the rated head. The shut off head shall not exceed 120% of rated head.

SITC of Above ground Piping MS ERW as per IS: 1239 (Heavy) for pipes upto 150 NB and as per IS: 3589 for pipes 200 NB & above

SITC of MS Pipe Fittings: Butt Welded Fittings for pipe size 65NB & above, Socket welded fittings for pipe size 50NB & below.

Valves and Specialities - SITC of Outside Screw and Yoke (OS & Y) Valve PN-16 with required flanges, nuts, bolts, etc., Complete. The Valve shall be rising stem type IS standards - For Pump Suction side & Pump Delivery side. (FM Approved) MOC:- Ductile Iron

SITC of Non Return Valves of rating (PN16) including necessary flanges, union, nuts, bolts, washers & painting etc complete as required. Type:Ball Type Moc:Ductile Iron

SITC of Flow Meter: Venturi Flow Meter capable to indicate flow not less than 175 percent of fire pump rated capacity with suitable valves, fittings & accessories (FM Approved)

SITC of Butterfly valve (Gear operated) PN16 with matching flanges, nuts and bolts. complete as per IS standards Type:Wafer Type Moc:Ductile Iron

SITC of Forged Brass Ball valve (Screwed End) confirming to IS Standards, suitable for the system pressure of rating PN -16.

The Motor Control Centre (MCC) electrical panels shall be sheet steel cabinet for indoor installation, dead front, floor mounting/wall mounting type and shall be 3b construction. The control panel shall be totally enclosed, completely dust and vermin proof and shall be with hinged doors with Neoprene gasket. Control panel shall be suitable for the climatic conditions as specified in Specifications. Steel sheets used in the construction of Control panel shall be 2 mm thick and shall be folded and braced as necessary to provide a rigid support for all components. Joints of any kind in sheet metal shall be seam welded, all welding, slag shall be rounded off and welding pits wiped smooth with plumber metal. The general construction shall confirm to relevant BIS Codes.

SITC of Supply, Installation, Testing & Commissioning of Motor control panel for below mentioned pumps (Fire Station) - With 1 Nos of Incomer -1250A Main Bus bar AL and 1 No of Bus Coupler and Electrical Interlock i) Electrical Pump (2 Nos) - Star Delta Starter (Suitable for 410 Cu.m Pump Capacity) ii) Jockey Pump (2 Nos) - DOL Starter (Suitable for 25 Cu.m Pump Capacity) complete with incomer, bus bar, protective fuses, indicating lamps with interlock facility with bottom/top entry with foot mounting type complete with all accessories.

SITC of Supply, Installation, Testing & Commissioning of Motor control panel for below mentioned pumps (Finger Jettry, ERS Berth & Fire Station) With 1 Nos of Incomer -250A Main Bus bar AL i) Electrical Pump (1 No) - Star Delta Starter (Suitable for 97 Cu.m Pump) complete with incomer, bus bar, protective fuses, indicating lamps with interlock facility with bottom/top entry with foot mounting type complete with all accessories.

SITC of Supply, Installation, Testing & Commissioning of Motor control panel for below mentioned pumps (LNG Terminal) With 1 Nos of Incomer -250A Main Bus bar Al i) Electrical Pump (1 No) - Star Delta Starter (Suitable for 273 Cu.m Pump) complete with incomer, bus bar, protective fuses, indicating lamps with interlock facility with bottom/top entry with foot mounting type complete with all accessories.

SITC of Supply, Installation, Testing & Commissioning of Motor control panel for below mentioned pumps (Container Prestacking Yard) With 1 Nos of Incomer -250A Main Bus bar Al i) Electrical Pump (1 Nos) - Star Delta Starter (Suitable for 171 Cu.m Pump) ii) Jockey Pump (1 Nos) - DOL Starter (Suitable for 10.8 Cu.m Pump) iii) Electrical Pump (1 No) - Star Delta Starter (Suitable for 54 Cu.m Pump) complete with incomer, bus bar, protective fuses, indicating lamps with interlock facility with bottom/top entry with foot mounting type complete with all accessories.

SITC of Supply & Installation of following accessories for Diesel Engine driven pump (Fire Station)

MS Diesel Tank - 500 Ltrs with necessary structural supports with 150% containment tank.

Diesel Engine Controller panel

Diesel (Initial Fill) of each tank.

24 volts 180 AH lead acid battery with boost/Trickle charger for starting the engine automatically

SITC of Supply & Installation of following accessories for Diesel Engine driven pump (Container Prestacking Yard)

MS Diesel Tank - 225 Ltrs with necessary structural supports with 150% containment tank.

Diesel Engine Controller panel

Diesel (Initial Fill) of each tank.

12 volts 180 AH lead acid battery with boost/Trickle charger for starting the engine automatically

Instrumentation & Cabling - SITC of Pressure gauge with SS Syphon tube Glycerin filled of 150 mm dial size with pressure range from 0 to 21 Kg/cm2 with all accessories like niddle valve etc., as per IS:3624

SITC of Pressure Switch : The pressure switches shall be of bellows type with required differential as per the system, and the range shall be adjustable and suitable for the operation of the pumps.

RT-116 Series for Electrical & Diesel Engine pump

RT-5 Series for Jockey Pump

SITC of Incoming Power Supply Cabling FRLS, XLPE insulated, PVC outer sheath, steel Armoured Al / Cu conductor with necessary supports, all glands, lugs, End Termination etc., complete as per standard specification.

3 core x 185 sq.mm Armoured Aluminium Cable

3 core x 95 sq.mm Armoured Aluminium Cable

3 core x 70 sq.mm Armoured Aluminium Cable

3 core x 25 sq.mm Armoured Aluminium Cable

3 core x 10 sq.mm armoured copper cable

8 core x 2.5 sq.mm armoured copper cable

3 core x 2.5 sq.mm armoured copper cable

3 core x 1.5 sq.mm armoured copper cable

2 core x 1.5 sq.mm armoured copper cable

SITC of Structural Support materials (Like Channel, Angle,Plate,I-Beam,etc..) for pipes supports including painting with one coat of Zinc Chromate epoxy base primer and two coats of enamel black paint.

SITC of Paint for above ground pipes with one coat of Zinc chromate primer & 2 coat of synthetic enamel PO RED paint (For Pipes)

SITC of Instrumentation Line with necessary Valves & Fittings (Dash Pot arrangement for instrument for pumps (Pre fabricated)

Strainer - SITC of BASKET TYPE & "Y" TYPE STRAINER: IS approved MS Body `Basket' strainer for pressure of PN 16 with SS perforated sheet basket including providing necessary rubber gasket, flanges, nuts, bolts, washers & painting of the same complete as required and suitable for system pressure.

300NB (Basket Type)

200NB (Basket Type)

100NB (Y Type)

80NB (Y Type)

SITC of C.I FOOT VALVE - FLANGED (suitable for test pressure of 16 kg / sqcm) with flanges, Nut, bolts & washers, painting etc. complete as required.

SITC of Priming Tank (PVC) of 1000 Liters with all accessories.

SITC of Priming Tank (PVC) of 500 Liters with all accessories.

SITC of Aboveground Piping - ERW, MS as per IS:1239 Part - I upto 150NB. All the pipe fittings for 65NB & above shall be welded type.

100NB - Pipe for Diesel Engine Exhaust line.

SITC of Thermal Insulation for the diesel engine drive pump exhaust pipe with 50 mm thick rock wool insulationand cladded with 22 gauge Aluminium/GI sheet in an approved manner.

50mm thk Rockwool Insulation for 150NB Exhaust pipe

SITC of Air vessel tank (Dia.- 800 mm) MS pipe to 2000 mm long complete with necessary inlets, outlets, air release valve, ball valve etc., MOC:- Mild Steel

SITC of Air vessel tank (Dia.- 300 mm) MS pipe to 1200 mm long complete with necessary inlets, outlets, air release valve, ball valve etc., MOC:- Mild Steel

SITC of Pressure Relief Valve (150x200) - FM Approved

SITC of Restricted Check Valve (25NB)

SITC of Circulation Relief Valve (20NB)

Description of Work / Item(s)

Amount

FIRE HYDRANT SYSTEM

SITC of Above ground Piping MS ERW as per IS: 1239 (Heavy) for pipes upto 150 NB and as per IS: 3589 for pipes 200 NB & above

SITC of Aboveground MS Pipe Fittings: Butt Welded Fittings for pipe size 65NB & above, Socket welded fittings for pipe size 50NB & below for above ground Piping

SITC of Above ground piping -DIDF Double flanged Ductile iron pipes as conforming to IS 8329-2000.The Pressure rating for the DI Pipe fittings and drilling standards shall match with PN-16. - Class - K9.

SITC of Under ground piping -DITJ as conforming to IS 8329-2000.The Pressure rating for the DI Pipe fittings and drilling standards shall match with PN-16. - Class - K9

SITC of D.I DJ Spool piece

250 mm dia Ductile Iron Class K-9 pipes for raising up to 1.5m from ground

200 mm dia Ductile Iron Class K-9 pipes for raising up to 1.5m from ground

150 mm dia Ductile Iron Class K-9 pipes for raising up to 1.5m from ground

100 mm dia Ductile Iron Class K-9 pipes for raising up to 1.5m from ground

SITC of DIDF/TJ Fittings like flanges, tees, elbows,Spigot,Duckfoot bend, DI Sockets,bolts & nuts etc.,

Valves - SITC of Outside Screw and Yoke (OS & Y) Valve PN-16 with required flanges, nuts, bolts, etc., Complete. The Valve shall be rising stem type IS standards - For Pump Suction side & Pump Delivery side. (FM Approved) MOC:- Ductile Iron

SITC of Structural Support materials (Like Channel, Angle,Plate,I-Beam,etc..) for pipes supports including painting with one coat of Zinc Chromate epoxy base primer and two coats of enamel black paint.

SITC of Paint for above ground pipes with one coat of Zinc chromate primer & 2 coat of synthetic enamel PO RED paint. (For Pipes)

SITC of Cast Iron body 4 way 63 mm dia male instantaneous inlet coupling complete with inbuilt NRV, cap and chain for fire brigade connection conforming to IS : 904.

SITC of Cast Iron body 4 way 63 mm dia male instantaneous inlet coupling complete with inbuilt NRV, cap and chain for breaching connection conforming to IS :904. (Breaching Inlet connection shall be international connection of Vessel coupling)

SITC of 25NB Gun metal Air Release valve

SITC of Pressure Relief Valve with following Specification which shall be UL Listed/FM Approved.

20NB-PRV

SITC of Forged Brass Ball valve (Screwed End) confirming to IS Standards, suitable for the system pressure of rating PN -16.

SITC of Pressure gauge with SS Syphon tube Glycerin filled of 150 mm dial size with pressure range from 0 to 21 Kg/cm2 with all accessories like niddle valve etc., as per IS:3624

Description of Work / Item(s)

Amount

HYDRANT ACCESSORIES

SITC of Single headed 63 mm diameter SS-304 hydrant valve with female type instantaneous outlet including flanged inlet to IS:639/Table 7 or IS:1538 rating & drilling and valve to IS 5290/A with PVC blank cap with chain and all accessories

SITC of Reinforced Rubber line hoses as per IS:636 Type-A with SS male .female coupling of size - 63 mm Dia x 15 M long for hydrants.

SITC of IS approved SS metal ISI marked Branch Pipes 63 mm. dia. instantaneous inlet and male threaded outlet complete with hexagonal base bore nozzles as per IS: 903.

SITC of IS approved Universal Branch Pipe ISI marked instantaneous inlet and male threaded outlet complete with hexagonal base bore nozzles as per IS: 903.

SITC of FRP Hose box suitable for storing 2 Nos.15M hoses and 1 No. SS branch pipe with Nozzle of 63mm dia size with locking arragement for double leaf front glass doors having 4mm thick glass as complete size of 750 x600 x 250 to mount in wall/stand. -a) Double door hose box

SITC of First Aid Hose Reel equipment conforming to IS:884 comprising of hose reel drum, 6 mm shut off nozzle, Rubber hose of 20 mm dia x 30 mtr. Long.

SITC of MOBILE FOAM TROLLEY with a capacity of 200 litres made of STAINLESS STEEL (SS-304) Foam, mounted on MS Trolley/Structure with Stainless Steel handles and provision to accommodate TWO Nos. of RRL Fire Hose, Type-B, as per IS: 636, ISI Marked having 63mmx15 Mtr length.

SITC of WATER CUM FOAM MONITOR made of Carbon Steel pipes and elbows as per IS: 1239 duly hot dip galvanized having 63mm Barrel Size & 80mm flanged inlet, with a flow capacity of 1750lpm@7kg/cm2 as per IS: - 8442 type “I” with GUN METAL Swivel Joints and self-inducting non-aspirating type and AL. ALLOY- AQUA FOAM Nozzle suitable for manual operation alongwith PVC PICK-UP TUBE WITH STAINLESS STEEL DIP TUBE suitable for manual operation

SITC of AFFF Foam Solution UL APPRD 3% concentrate

Description of Work / Item(s)

Amount

CONVENTIONAL FIRE ALARM SYSTEM

SITC of Conventional Fire Alarm Control panel with battery back up for normal operation. The Panel Shall be 2-Zone capacity with battery charger etc,

SITC of Conventional Sounder cum strobe with Wall mounting accessories with slectable multi tone and suitable size GI Junction Box with GI Base Plate to mount the Device with GI glands

SITC of Conventional Manual Call Point with Wall mounting accessories with slectable multi tone and suitable size GI Junction Box with GI Base Plate to mount the Device with GI glands

SITC of Conventional Multi Sensor type detectors with indicating LED, mounting base etc.

SITC of approved make Siren (1 Kilo Meter Range) Double Mounting, on wall with accessories like, Junction boxes, Collars, Bends etc.

SITC of 2 C x 1.5 Sq.mm copper Armoured FRLS armoured shielded cable clamping at wall/ purlin/ ceiling / column etc. The Rate Inclusive of cable gland, base saddle with MS cover plate and necessary back box etc.all complete as reruired.

SITC of Supply, Erection and Testing of 50mm dia GI conduit for laying of fire cable including necessary accessories like bend, junction box fixing of clamps etc., complete. The conduit shall be recessed in wall including chipping, rough plastering etc.

Usage of Scaffolding/boom lift/scissor lift charges (Rental) for height more than 14 mtrs

Description of Work / Item(s)

Amount

PORTABLE FIRE EXTINGUISHERS

SITC of ABC Stored Pressure Type Fire Extinguisher 9Kgs capacity bearing ISI Mark for Fighting ABC Class of Fire. The Extinguisher will be Manufactured Strictly as per BIS: 15683:2018 bearing ISI. Mark.

SITC of Carbon-di- oxide type fire extinguisher of 4.5 kgs. Capacity, CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve, discharge nozzle, bend & horn, wal mounting bracket etc. complete, confirming to IS: 15683

SITC of Mechancial Foam type Fire Extinguishers 45 litres capacity fitted with gunmetal cap, supplied complete with initial charge hose with nozzle with AFFF Liquid 3000mls, and mounted on trolley with inside gas cartridge as per IS:16018:2012 specn. With ISI mark

SITC of Mechancial Foam type Fire Extinguishers 09 litres Capacity Water Stored Pressure type Fire Extinguisher, 9Litre’s capacity Fire Extinguishers. The Extinguisher will be Manufactured Strictly as per BIS: 15683:2018 bearing ISI. Mark.

SITC of ABC Inside Cartridge 25 Kgs. Fire Extinguisher Dry Chemical Powder (ABC) 25 Kgs. Capacity Fire Extinguisher, inside cartridge type fitted with Gun Metal cap, high pressure discharge hose with Nozzle, trolley mounted will be coupled with Co2 Gas Cartridge, painted Fire red.

SITC of ABC Outside Cartridge 50 Kgs. Fire Extinguisher Dry Chemical Powder (ABC) 50Kgs. Capacity Fire Extinguisher, outside cartridge type fitted with Gun Metal cap, high pressure discharge hose with Nozzle, trolley mounted will be coupled with Co2 Cylinder externally (expellant), painted Fire red.

SITC of Foot Operated Eye Wash Units are made of powder coated anti corrosive SS pipes

Description of Work / Item(s)

Amount

SIGNAGES

Stencil Paint of Hydrant System components;

Painting in position the signage of " OS&Y VALVE" using Stencil Paint

Painting in position the signage of " HOSE BOX" using Stencil Paint

Painting in position the signage of " SH01" using Stencil Paint

Painting in position the signage of " FBI01"using Stencil Paint

Painting in position the signage of " ARV01" using Stencil Paint

Painting in position the signage of " PRV01" using Stencil Paint

Painting in position the signage of " FIRE HYDRANT LINE" using Stencil Paint

Providing, installing and fixing in position the signages of fire boards approved by TN State Fire Service - size 2ft x 4ft made out of U - 1000 photo luminescent 1mm thick aluminium sheet with high intensity luminous properties covered with U/V stabilized coating of 1mm thick suitable for indoor & outdoor application. The signage suitable to resist -10 deg c to +120 deg c temperature, fungi-static, non toxic, non radio active and should not contain lead or phosphorus with a surface colour of greenish yellow with necessary support structure cum footing and painting on structures.

Providing and fixing in position the sign board of " ASSEMBLY POINT " complete with 1 mm thick rigid plastic board size of 600 mm x 500 mm to be fixed on ground by using a steel rod / pipe at designated places as per drawing. (with necessary support structure cum footing and painting on structures.)

Thermoplast Floor Marking (4") for Fire Tender vehicle pathway movement inside car parking area (Yellow Zebra Crossing & Block)

Description of Work / Item(s)

Amount

CIVIL & MISCELLANEOUS

A. FIRE APPARATUS / FIRE TRUCKS - SHED - CIVIL STRUCTURE (12.5 X 6 MTR (HGT - 5.5M) (Location -1)

Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth and earth mixed with small size boulders and hard gravely soil as per SS 20B with initial lead of 10m and lift of 2m etc. complete.

0 - 3m depth below GL (For Open Evacuation )

Supply and Laying of Lime with 1:1 ratio of water mix inside Soil Foundation with 50mm dia of 300mm deep penetration like a 1'x1' grid to increase soil stability

P.C.C 1:3:6 using 40mm gauge hard broken stone jelly for PCC works including laying in layers of not more than 15 cm, thick including ramming, curing etc. complete.

75mm thick

Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting.

Upto 3m high

Upto 6m high

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 garde and GGBS 123Kg per cum for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering, shuttering and reinforcement but including curing etc.

0 to 2m High above GL

2 to 4m High above GL

4 to 6m High above GL

Supplying, fabricating and laying in position MS rounds or CRS Type HYSD Bars for RCC works including cost of reinforcement, binding wire, cutting bending, cranking and tying in position with binding wire assembly, etc. complete.

Supply and Application of Bitumen Coating over Compond wall RCC Structure like Beam, column with 2 layer of coating as a protective layer. Rate which includes Transportation of Material, Tools, Applicator cost, etc., all complete and as directed by the departmental officials

Bailing out of sub-soil water (provision given for earth work excavation at 3 - 4m depth below GL). 1HP Submersible pumpset

Plastering 20mm thick with cement mortar 1:4 ratio along with the Master Seal SBR chemical mix as per manufacturer specifications with all tools and tackles etc., all complete as per departmental officials instructions

0 - 2m High above GL

2 - 6m High above GL

Supply and Laying of 20mm thick Screed concrete on Roof top of the structure to protect Roof from Water logging along with water proofing work using Dr. fixit chemical and provisions of 100mm PVC Rain water pipe. Rate which includes Tools & Tackles, Material cost, Lifting of Material cost etc., all complete

Roof Top & Floor Finish

Supply and Laying of 8" Solid Block (450 x 200 x 200MM) with cement mortar 1:4 ratio along with the Master Seal SBR chemical mix as per manufacturer specifications with all tools and tackles etc., all complete as per departmental officials instructions

Supply of Granular Sub Base (GSB)

Levelling and Compaction of GSB with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

Finshing Floor using Power Trolley machine with hardener as per Manufacturer specification

Supply and Application of 1 Coat Outer Primer (Asian paints) and 2 coat ACE emulsion exterior as per departmental colour code confirmation. Rate which includes all Tools and Tackles, Material, Labour charges, Transportation charges, etc., all complete

0 - 2m High above GL

2 - 6m High above GL

B. COMPOUND WALL - 48 X 45 M - FWPH 1 near Fire Station (Location-2)

Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth and earth mixed with small size boulders and hard gravely soil as per SS 20B with initial lead of 10m and lift of 2m etc. complete.

0 - 3m depth below GL (For open excavation)

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 garde and GGBS 123Kg per cum for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering, shuttering and reinforcement but including curing etc.

0 - 2m High above GL (M30 Design Mix )

P.C.C 1:3:6 using 40mm gauge hard broken stone jelly for PCC works including laying in layers of not more than 15 cm, thick including ramming, curing etc. complete.

Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting.

Upto 3m high

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M 30 grade for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering, shuttering and reinforcement but including curing etc.

M25 Design Mix, Plinth Beam (300 X 450MM) - 0 - 2m High above GL

Supply and Laying of 8" Solid Block (450 x 200 x 200MM) with cement mortar 1:4 ratio along with the Master Seal SBR chemical mix as per manufacturer specifications with all tools and tackles etc., all complete as per departmental officials instructions

0 - 3m High above GL

Supplying, fabricating and laying in position MS rounds or CRS Type HYSD Bars for RCC works including cost of reinforcement, binding wire, cutting bending, cranking and tying in position with binding wire assembly, etc. complete.

Supply and Application of Bitumen Coating over Compond wall RCC Structure like Beam, column with 2 layer of coating as a protective layer. Rate which includes Transportation of Material, Tools, Applicator cost, etc., all complete and as directed by the departmental officials

Disposal of surplus earth inside the site - 100mtr (Once)

Bailing out of sub-soil water (provision given for earth work excavation at 3 - 4m depth below GL) - Electrically driven 1HP Submersible pumpset

Plastering 20mm thick with cement OPC mortar 1:4 ratio along with the Master Seal SBR chemical mix as per manufacturer specifications with all tools and tackles etc., all complete as per departmental officials instructions

0 - 2m High above GL

2m - 3m High above GL

Supply of Murram Soil

Levelling and Compaction of Soil with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

Supply and Application of 1 Coat Outer Primer (Asian paints) and 2 coat ACE emulsion exterior as per departmental colour code confirmation. Rate which includes all Tools and Tackles, Material, Labour charges, Transportation charges, etc., all complete

0 - 2m High above GL

2m - 3m High above GL

Supply of GSB

Levelling and Compaction of GSB with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

Providing and laying at or near ground level factory made kerb stone of Size - 450 x 450 x 150mm in position to the required line, level and curvature, jointed with cement mortar I :3.

Supply, Providing and Laying Factory made coloured chambered edge Cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & Pattern over 30mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with river sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc., complete etc as per manufacturer's specifications & ddirection given by the departmental officials 60mm thick C.C Paver blocks of M-30 Grade

Bush cutting and trimming of tree branches Cleaning jungle including uprooting of rank vegetation grass bush wood tree and saplings of girth up to 30cm measured at a height of 1 mtr above ground level and remove of rubbish up to a distance of 50m. (Re-vegetation not Considered). (75% of total area is Considered)

C. FIRE WATER TANK SUBSTRUCTURE - DIA 7.73M X 8.45 (H) - 350KL (CAPACITY OF TANK) )(Container Prestacking Yard) (Location -3)

Installation of boring machine at various locations and boring the pile to an avarage depth of 12.0m (approxmately) from the soffit of the pile cap to the shoe of the pile through any type of soil up to hard stratum as per the drawing/ instructions, providing direct circulation of bentonite slurry within or outside of the permises as per the instructions, including cost of Bentonite and transportation of pump etc. complete

12 NOS PILE - 12MTR DEPTH (APPROX) - (For 600 mm dia pile )

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 garde and GGBS 123Kg per cum for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering, shuttering and reinforcement but including curing etc.

Breaking the Extra pile length upto mud concrete

Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth and earth mixed with small size boulders and hard gravely soil as per SS 20B with initial lead of 10m and lift of 2m etc. complete.

P.C.C 1:3:6 using 40mm gauge hard broken stone jelly for PCC works including laying in layers of not more than 15 cm, thick including ramming, curing etc. complete.

75mm thick

Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting.

Upto 3m high

Bailing out of sub-soil water (provision given for earth work excavation at 3 - 4m depth below GL) - Electrically driven 1HP Submersible pumpset

Supply of Murram Soil

Levelling and Compaction of Soil with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

Supply of GSB

Levelling and Compaction of GSB with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 garde and GGBS 123Kg per cum for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering, shuttering and reinforcement but including curing etc.

Supplying, fabricating and laying in position MS rounds or CRS Type HYSD Bars for RCC works including cost of reinforcement, binding wire, cutting bending, cranking and tying in position with binding wire assembly, etc. complete.

Finishing Floor using Power Trolley machine with hardener as per Manufacturer specification

Disposal of surplus earth inside the site - 100mtr (Once)

Disposal of Pile waste slurry Outside from the premises 8000 Litre vehicle capacity

Soil Test Report for tank area

D. FIRE WATER PUMP HOUSE - 7.0 (L) X 6.0 (W) X 4(H)(Container Prestacking Yard) (Location -4)

Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth and earth mixed with small size boulders and hard gravely soil as per SS 20B with initial lead of 10m and lift of 2m etc. complete.

0 - 3m depth below GL (For open excavation)

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 garde and GGBS 123Kg per cum for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering, shuttering and reinforcement but including curing etc.

AT any Height

P.C.C 1:3:6 using 40mm gauge hard broken stone jelly for PCC works including laying in layers of not more than 15 cm, thick including ramming, curing etc. complete.

Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting.

Upto 3m high

3m to 4m high

Bailing out of sub-soil water (provision given for earth work excavation at 3 - 4m depth below GL) - Electrically driven 1HP Submersible pumpset

Supply of Murram Soil

Levelling and Compaction of Soil with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

Supply of GSB

Levelling and Compaction of GSB with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

Supply and Laying of 8" Solid Block (450 x 200 x 200MM) with cement mortar 1:4 ratio along with the Master Seal SBR chemical mix as per manufacturer specifications with all tools and tackles etc., all complete as per departmental officials instructions

Plastering Inner and Outerwall 20mm thick with cement mortar 1:4 ratio along with the Master Seal SBR chemical mix as per manufacturer specifications with all tools and tackles etc., all complete as per departmental officials instructions

0 - 2m High above GL

2 - 4m High above GL

Plastering Ceiling 12mm thick with cement mortar 1:3 ratio along with the Master Seal SBR chemical mix as per manufacturer specifications with all tools and tackles etc., all complete as per departmental officials instructions

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 garde and GGBS 123Kg per cum for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering, shuttering and reinforcement but including curing etc.

Finishing Floor using Power Trolley machine with hardener as per Manufacturer specification

Supply and Application of 1 Coat Outer Primer (Asian paints) and 2 coat ACE emulsion exterior as per departmental colour code confirmation. Rate which includes all Tools and Tackles, Material, Labour charges, Transportation charges, etc., all complete

0 - 2m High above GL

2 - 4m High above GL

Construction of RCC PUMP FOUNDATION with PCC 1:3:6 using 40 mm HBJ including anchorage provisiions as directed during excution with necessary earth-work excavation, centering, Rod work, curing etc complete for various bends,Tees as mentioned below.

JOCKEY PUMP FOUNDATION - 1300 X 700 MM

ELECTRICALLY DRIVEN PUMP FOUNDATION - 1600 X 800MM

DIESEL PUMP FOUNDATION - 1600 x 1100MM

ELECTRICALLY DRIVEN PUMP FOUNDATION - 1300 x 600M

Supplying, fabricating and laying in position MS rounds or CRS Type HYSD Bars for RCC works including cost of reinforcement, binding wire, cutting bending, cranking and tying in position with binding wire assembly, etc. complete.

Supply and Laying Terrace - Rain water Pipe 100mm dia PVC including Fittings, Special clamps withall required accessories etc.,, all complete

Supply and Laying of 20mm thick Screed concrete on Roof top of the structure to protect Roof from Water logging along with water proofing work using Dr. fixit chemical, Coving etc. Rate which includes Tools & Tackles, Material cost, Lifting of Material cost etc., all complete

Roof Top

Disposal of surplus earth inside the site - 100mtr (Once)

Supply and Fixing of Aluminium Window (Size - 4 x 4 ft) includes Grill of minimum 25kg weight.

Supply and Fixing of Mild steel Rolling Shutter (Manual Push & Pull type) which includes 21 coat primer and 2 coat Enamel. Asian Paint - Brand

2 M(WIDTH) X 3.55 M (HIGH)

2 Tube lights with necessary DB & Electrical wiring.

E. FIRE WATER TANK SUBSTRUCTURE - DIA 14.61M X 8.45 (H) - 1250KL (CAPACITY OF TANK) - 2 Tanks (Near Fire Station)

Installation of boring machine at various locations and boring the pile to an avarage depth of 12.0m (approxmately) from the soffit of the pile cap to the shoe of the pile through any type of soil up to hard stratum as per the drawing/ instructions, providing direct circulation of bentonite slurry within or outside of the permises as per the instructions, including cost of Bentonite and transportation of pump etc. complete

21 NOS PILE - 12MTR DEPTH (APPROX) - For 600 mm dia pile

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 garde and GGBS 123Kg per cum for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering, shuttering and reinforcement but including curing etc.

Breaking the extra pile length upto mud concrete

Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth and earth mixed with small size boulders and hard gravely soil as per SS 20B with initial lead of 10m and lift of 2m etc. complete.

P.C.C 1:3:6 using 40mm gauge hard broken stone jelly for PCC works including laying in layers of not more than 15 cm, thick including ramming, curing etc. complete.

75mm thick

Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting.

Upto 3m high

Bailing out of sub-soil water (provision given for earth work excavation at 3 - 4m depth below GL) - Electrically driven 1HP Submersible pumpset

Supply of Murram Soil

Levelling and Compaction of Soil with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

Supply of GSB

Levelling and Compaction of GSB with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 garde and GGBS 123Kg per cum for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering, shuttering and reinforcement but including curing etc.

Supplying, fabricating and laying in position MS rounds or CRS Type HYSD Bars for RCC works including cost of reinforcement, binding wire, cutting bending, cranking and tying in position with binding wire assembly, etc. complete.

Finshing Floor using Power Trolley machine with hardener as per Manufacturer specification

Disposal of surplus earth inside the site - 100mtr (Once)

Disposal of Pile waste slurry Outside from the premises 8000 Litre vehicle capacity

Soil Test Report for tank area

F. FIRE WATER PUMP HOUSE - 20 (L) X 7 (W) X 4(H) (Near Fire Station)

Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth and earth mixed with small size boulders and hard gravely soil as per SS 20B with initial lead of 10m and lift of 2m etc. complete.

0 - 3m depth below GL (For open excavation)

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 garde and GGBS 123Kg per cum for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering, shuttering and reinforcement but including curing etc.

AT any Height

P.C.C 1:3:6 using 40mm gauge hard broken stone jelly for PCC works including laying in layers of not more than 15 cm, thick including ramming, curing etc. complete.

Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting.

Upto 3m high

3 TO 4m high

Bailing out of sub-soil water (provision given for earth work excavation at 3 - 4m depth below GL) - Electrically driven 1HP Submersible pumpset

Supply of Murram Soil

Levelling and Compaction of Soil with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

Supply of GSB

Levelling and Compaction of GSB with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

Supply and Laying of 8" Solid Block (450 x 200 x 200MM) with cement mortar 1:4 ratio along with the Master Seal SBR chemical mix as per manufacturer specifications with all tools and tackles etc., all complete as per departmental officials instructions

Plastering Inner and Outerwall 20mm thick with cement mortar 1:4 ratio along with the Master Seal SBR chemical mix as per manufacturer specifications with all tools and tackles etc., all complete as per departmental officials instructions

0 - 2m High above GL

2 - 4m High above GL

Plastering Ceiling 12mm thick with cement mortar 1:3 ratio along with the Master Seal SBR chemical mix as per manufacturer specifications with all tools and tackles etc., all complete as per departmental officials instructions

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 garde and GGBS 123Kg per cum for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering, shuttering and reinforcement but including curing etc.

Finishing Floor using Power Trolley machine with hardener as per Manufacturer specification

Supply and Application of 1 Coat Outer Primer (Asian paints) and 2 coat ACE emulsion exterior as per departmental colour code confirmation. Rate which includes all Tools and Tackles, Material, Labour charges, Transportation charges, etc., all complete

0 - 2m High above GL

2 - 4m High above GL

Construction of RCC Pedastals with PCC 1:3:6 using 40 mm HBJ including anchorage provisiions as directed during excution with necessary earth-work excavation, centering, Rod work, curing etc complete for various bends,Tees as mentioned below.

JOCKEY PUMP FOUNDATION - 1300 x 700MM

ELECTRICALLY DRIVEN PUMP FOUNDATION - 2100 x 1200M

DIESEL ENGINE DRIVEN PUMP FOUNDATION - 3200 x 1200MM

ELECTRICALLY DRIVEN PUMP FOUNDATION - 2400 x 1200M

ELECTRICALLY DRIVEN PUMP FOUNDATION - 1300 x 600M

Supplying, fabricating and laying in position MS rounds or CRS Type HYSD Bars for RCC works including cost of reinforcement, binding wire, cutting bending, cranking and tying in position with binding wire assembly, etc. complete.

Supply and Laying Terrace - Rain water Pipe 100mm dia PVC including Fittings, Special clamps withall required accessories etc.,, all complete

Supply and Laying of 20mm thick Screed concrete on Roof top of the structure to protect Roof from Water logging along with water proofing work using Dr. fixit chemical, Coving etc. Rate which includes Tools & Tackles, Material cost, Lifting of Material cost etc., all complete

Roof Top

Disposal of surplus earth inside the site - 100mtr (Once)

Supply and Fixing of Aluminium Window (Size - 4 x 4 ft) includes Grill of minimum 25kg weight.

Supply and Fixing of Mild steel Rolling Shutter (Manual Push & Pull type) which includes 21 coat primer and 2 coat Enamel. Asian Paint - Brand

2 M(WIDTH) X 3.55 M (HIGH)

4 Tube lights with necessary DB & Electrical wiring

G. TRENCH - PIPE LAYING WORK (1500 (L) X 450 (B) MM)

Removal of Paver Block and Shift inside premises. (The cost should be including with the handling charges)

Earth work & Re filling excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth and earth mixed with small size boulders and hard gravely soil as per SS 20B with initial lead of 10m and lift of 2m etc. complete.

0 - 3m depth below GL (For open excavation)

P.C.C 1:3:6 using 40mm gauge hard broken stone jelly for PCC works including laying in layers of not more than 15 cm, thick including ramming, curing etc. complete.

100mm thick

Construction of Thrust block of standard size with PCC 1:3:6 using 40 mm HBJ including fixing of M.S rod for anchorage as directed during excution with necessary earth-work excavation, centering, curing etc complete for various bends,Tees as mentioned below.

For Fire Hydrant Pipe -For Every 3m interval (Trust Block)

Supply and Filling of M.Sand

Inside Trench

Levelling and Compaction of Msand with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

TRENCH

Supply of GSB

Levelling and Compaction of GSB with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

TRENCH

Supply, Providing and Laying Factory made coloured chambered edge Cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & Pattern over 30mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with river sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc., complete etc as per manufacturer's specifications & ddirection given by the departmental officials 60mm thick C.C Paver blocks of M-30 Grade

FINISHED ROAD LEVEL

Relaying of removed Paver Block

Disposal of surplus earth inside the site - 100mtr (Once)

H. GCB AREA - TRENCH WORK

Removal of Paver Block and Shift inside premises. (The cost should be including with the handling charges)

Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth and earth mixed with small size boulders and hard gravely soil as per SS 20B with initial lead of 10m and lift of 2m etc. complete.

0 - 3m depth below GL (For open excavation)

P.C.C 1:3:6 using 40mm gauge hard broken stone jelly for PCC works including laying in layers of not more than 15 cm, thick including ramming, curing etc. complete.

100mm thick

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 grade for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering, shuttering and reinforcement but including curing etc.

Any Type of Height

Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting.

Upto 3m high

Supplying, fabricating and laying in position MS rounds or CRS Type HYSD Bars for RCC works including cost of reinforcement, binding wire, cutting bending, cranking and tying in position with binding wire assembly, etc. complete.

Supply of Murram Soil

Inside - Trench

Levelling and Compaction of Soil with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

Supply of GSB

Inside - Trench

Levelling and Compaction of GSB with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

Inside - Trench

Disposal of surplus earth inside the site - 100mtr (Once)

Bailing out of sub-soil water (provision given for earth work excavation at 3 - 4m depth below GL) - Electrically driven 1HP Submersible pumpset

I. TRUCK PARKING AREA - TRENCH WORK

Removal of Paver Block and Shift inside premises. (The cost should be including with the handling charges)

Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth and earth mixed with small size boulders and hard gravely soil as per SS 20B with initial lead of 10m and lift of 2m etc. complete.

For open excavation-(0 - 3m depth below GL)

P.C.C 1:3:6 using 40mm gauge hard broken stone jelly for PCC works including laying in layers of not more than 15 cm, thick including ramming, curing etc. complete.

100mm thick

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 grade for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering, shuttering and reinforcement but including curing etc.

Any Type of Height

Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting.

Upto 3m high

Supplying, fabricating and laying in position MS rounds or CRS Type HYSD Bars for RCC works including cost of reinforcement, binding wire, cutting bending, cranking and tying in position with binding wire assembly, etc. complete.

Supply of Murram Soil

Inside - Trench

Levelling and Compaction of Soil with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

Supply of GSB

Inside - Trench

Levelling and Compaction of GSB with Earth Roller of capacity 7 Ton. Compaction will be done each layer by layer of 150mm thick. Rate which includes Machineries, Labour cost, Earth Rammer cost etc., all complete and as directed by the Departmental officials

Inside - Trench

Disposal of surplus earth

Bailing out of sub-soil water (provision given for earth work excavation at 3 - 4m depth below GL) - Electrically driven 1HP Submersible pumpset

J. CAR PARKING UNDERGROUND - PIPE LAYING WORK (1(W) X 1(D))

Concrete Floor - Diamond Cutting along the surfaces using Machiners, Tools and Labour charges etc., all complete

Earth work & Re filling excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth and earth mixed with small size boulders and hard gravely soil as per SS 20B with initial lead of 10m and lift of 2m etc. complete.

For open excavation -(0 - 3m depth below GL)

P.C.C 1:3:6 using 40mm gauge hard broken stone jelly for PCC works including laying in layers of not more than 15 cm, thick including ramming, curing etc. complete.

100mm thick

Construction of Thrust block of standard size with PCC 1:3:6 using 40 mm HBJ including fixing of M.S rod for anchorage as directed during excution with necessary earth-work excavation, centering, curing etc complete for various bends,Tees as mentioned below.

For Underground Fire Hydrant Pipe - For Every 3m interval (Trust Block) - 1.0 M (L) X0.30 M (W) X 0.40 M (H)

Supply and Filling of M.Sand

Inside Trench

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 grade for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering, shuttering and reinforcement but including curing etc.

Any Type of Height

Supply and Laying of HILTI RE500 V4 to the holes of minimum dia 12mm with depth of 75mm for 10mm bars.

Supplying, fabricating and laying in position MS rounds or CRS Type HYSD Bars for RCC works including cost of reinforcement, binding wire, cutting bending, cranking and tying in position with binding wire assembly, etc. complete.

Supply and Application of Fosroc Nitobond EP before Concreting process to the old concrete which act as a bonding Agent

Bailing out of sub-soil water (provision given for earth work excavation at 3 - 4m depth below GL) - Electrically driven 1HP Submersible pumpset

Relaying of concrete RCC 1:1.5:3

K. COVER SLAB

SPECIFICATION OF WORKS

M30 Grade Concrete

Nominal Reinforcement

Removal & Re- Installation of Concrete Slab

Cover slab RCC 0.35 x 0.35 x 2.3m Sized this cost including Erection

Cover slab RCC 0.25 x 0.25 x 2.3m Sized this cost including Erection

L. MONITOR TOWER

Civil Works for Tower Monitor

SPECIFICATION OF WORKS - Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth and earth mixed at required depth of 900mm from NGL of sizes 2.5m x 2.5m , Supply and Laying of P.C.C 1:3:6 using 40mm gauge hard broken stone jelly for PCC works including laying in layers of not more than 10 cm thick and sizes 2.2m x 2.2m, Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 grade including Formwork, Reinforcement details with minimum 300 kg usages of CRS Steels , MATT Concrete - (2 x 2 x 0.3 m), Column from NGL Level 1mtre height, Top slab ( 1.2 x 1.2 x 0.2m), Staircase (1.5 x 0.6mtr) will be provided with waist slab thick 150mm tk along with the steps, Plastering Inner and Outerwall 20mm thick with cement mortar 1:4 ratio along with the Master Seal SBR chemical mix as per manufacturer specifications, Supply and Application of 1 Coat Outer Primer (Asian paints) and 2 coat ACE emulsion exterior as per departmental colour code confirmation.

M. MISCELLANEOUS ITEMS

Excavation in soft soil only

Backfilling in soft soil only

P.C.C 1:3:6 using 40mm gauge hard broken stone jelly for PCC works including laying in layers of not more than 15 cm, thick including ramming, curing etc. complete.

100mm thick

SITC of Pedestal supports for above ground piping (pedestal size -300x300x750mm)

Description of Work / Item(s)

Amount

FIRE WATER STORAGE TANK

SITC of FIRE WATER STORAGE TANK - 1250KL Each (Fire Station)

SITC of Construction of an Above Ground Fire Water Storage Tank of capacity 1250KL (Glass Fused Steel Storage Tanks) - (Ø14.61 x 8.45Mtrs(H))

50 NB SS Pipe & Fittings

50 NB SS Ball Valve

SITC of FIRE WATER STORAGE TANK - 350KL (Layout of Container Prestacking Yard)

SITC of Construction of an Above Ground Fire Water Storage Tank of capacity 350KL (Glass Fused Steel Storage Tanks) - (Ø7.73 x 8.45Mtrs(H))

50 NB SS Pipe & Fittings

50 NB SS Ball Valve

BOMS Private Limited (BID ID -3173699)

DES TECHNICO LIMITED (BID ID -3177558)

BOMS Private Limited (BID ID -3173699)

DES TECHNICO LIMITED (BID ID -3177558)

DES TECHNICO LIMITED (BID ID -3177558)

BOMS Private Limited (BID ID -3173699)

DES TECHNICO LIMITED (BID ID -3177558)

Hitek Engineering Services (BID ID -3178075)

DES TECHNICO LIMITED (BID ID -3177558)

BOMS Private Limited (BID ID -3173699)

DES TECHNICO LIMITED (BID ID -3177558)

Hitek Engineering Services (BID ID -3178075)

DES TECHNICO LIMITED (BID ID -3177558)

BOMS Private Limited (BID ID -3173699)

BOMS Private Limited (BID ID -3173699)

Hitek Engineering Services (BID ID -3178075)

Hitek Engineering Services (BID ID -3178075)

BOMS Private Limited (BID ID -3173699)

Hitek Engineering Services (BID ID -3178075)

DES TECHNICO LIMITED (BID ID -3177558)

DES TECHNICO LIMITED (BID ID -3177558)

Hitek Engineering Services (BID ID -3178075)