SPECIAL REPAIRS TO ORC AT AFS BEGUMPET UNDER GE (AF) HAKIMPET

B/R PORTION : Dismantling floor/wall tiling including cement mortor bedding (but not backing) removing of unserveable tiles from site and rubbish of the premises complete all as specified and as directed.

Demolition of plain cement cement concrete/terrazo tiles with cement mortor bedding in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing the debris outside MOD land complete all as specified and as directed.

M & L for Plain Cement concrete type C-1 1:3:6 using 20mm graded crushed stone aggregates 75mm thick as in plinth protection, hard standing, sub base, floor finish complete all as specified and as directed.

M & L for Plain Cement concrete type B-0,1:2:4(12.50 mm graded aggregate) 25mm thick complete all as specified and as directed.

M&L for 15 mmm thick screed bed or bedding layer in CM 1:6 as in base to floor finish complete all as specified and as directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.09 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free complete all as specified and as directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free complete all as specified and as directed.

-Ditto- all as per item No 7 above here-in-before but as in vertical surface such as skirting etc. to match with the flooring-ditto- complete all as specified and as directed.

M&L Vitrified Ceramic light coloured tiles 9 to 10 mm thick area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free complete all as specified and as directed.

-Ditto- all as per item above here-in-before but as in vertical surface such as skirting etc. to match with the flooring-ditto- complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as in base for wall tiling in shirting/dado complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles in vertical surface 350 x 250mm x 7mm or 450 X350X 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Dismantling stone slab of any description or thickness in floors approns etc laid bedded and pointed in any mortar complete all as specified and as directed.

M & L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Mirror polishing and edge rounded all as per specified for steps and including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 20mm Granite (of any type) work (table rubbed and polished) including necessary moulding on edges fixed on cup board shelves partitions holded on angle cleats , holdfasts ,rails including proper fixing arrangments with screws etc independently complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (40 mm graded aggregate) as in sub base complete all as specified and as directed.

M & L 20cmx20cmx25mm/30 cmx30 cmx25 mm thick chequerd cement concrete tiles grey cement with pigment set and jointed in neat cement slurry including 15 mmm thick screed bed or bedding layer in CM 1:6 as in base to floor finish complete all as specified and as directed.

S&F Cement concrete tiles 25cmx 25cm x 22mm thick with grey cement and pigment including 15 mmm thick screed bed or bedding layer in CM 1:6 as in base to floor finish complete all as specified and as directed.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed.

Taking down mud plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick plastering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick plastering on fair faces of brick work or concrete surfaces in two layer with 10 mm thick in CM 1:6 and top 5 mm thick in CM 1:4, mixing water proofing compound at 3% by weight of cement (but excluding the cost of WPC) finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 10 mm thick plastering in CM 1:3 on fair faces of brick work or concrete surface as in ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered surface of wall and applying 2mm thick putty finish to obtain smooth finish wall surface and applying two coat of distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparing new plastered surface of ceiling and applying 1mm thick putty finish to obtain smooth finish in ceiling surface and applying two coat of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparing new plastered surface of wall surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment of wall and applying 2mm thick putty finish to obtain smooth finish wall surface and applying two coats of distemper over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment of ceiling and applying 1mm thick putty finish to obtain smooth finish ceiling surface and applying two coats of distemper over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment on walls, Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for preparing old plastered surface of wall and applying one coats of OBD complete all as specified and as directed.

M&L for preparing old plastered surface of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L for Flush/raised pointing in CM 1:4 to squared rubble masonry, coursed complete all as specified and as directed.

Demolition of RCC Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter or fix using ply board, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm or nearest sweep including taking down old unsv exhaust fan and deposit to E&M store complete all as specified and as directed. Make: Havells or equivalent in Anchor/Usha.

M&L fot TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition of brick work built in CM including All Quions, arches, pillars etc complete all as specified and as directed.

M & L Brickwork with old size bricks using fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

M & L for Pre-cast cement concrete block masonry with solid blocks, Type C1 1:3:6 (20mm graded aggregate) exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed.

Cutting chases, in stone walls, pinning in, making good to facing where required and pointing in cement mortpor 1:3 for concealed water tubing and making good, cuting exc, 10 cm but n.exc 20 cm girth complete all as specified and as directed.

S&F 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including Taking up or down steel tubing and connections including cleaning for refixing or removing to store 15 mm bore complete all as specified and as directed.

S&F 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including Taking up or down steel tubing and connections including cleaning for refixing or removing to store 20 mm bore complete all as specified and as directed.

S&F Brass elbow 20(3/4 x 1/2)mm dia complete all as specified and as directed.

S&F Brass tee 20mm dia complete all as specified and as directed.

S&F Male Brass Threaded Adaptor 20mm dia (MTA/ MBTA) ) complete all as specified and as directed.

S&F Female Brass Threaded Adaptor (FTA/ FBTA) 20mm dia complete all as specified and as directed.

S&F Tank Adaptor 25mm dia complete all as specified and as directed.

S&F union of size of 25mm dia complete all as specified and as directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F Gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed 25 mm bore complete all as specified and as directed.

Dismantling water tank of capacity exc 500 & n.exc 1000 ltrs complete all as specified and as directed.

Dismantling water tank of capacity exc 250 & n.exc 500 ltrs complete all as specified and as directed.

S&F 1000 ltrs capacity Rotational moulded polythene water strong tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F 500 ltrs capacity Rotational moulded polythene water strong tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F in repairs Ball valves high pressure of PTMT with eppoxy coated Aluminium rod & high density plastic ball screwed for iron pipes and fixed 25 mm bore (Minimum weight 455 gms) complete all as specified and as directed.

Demolition and breaking up of AC/PVC drain pipes 100 mm dia set in CM complete all as specified and as directed.

S&F PVC in repairs (SWR) floor trap diameter of out let 75 mm ,plain with grating including jointing with solvent cement fixed in cement concrete complete all as specified and as directed. (cement concrete shall be measured and paid seperately)

S&F 150 X150 mm Salt-glazed stone ware gully traps, square, type 'P' complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm in repairs complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm in repairs complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radiuis complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends with access door any radiuis complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radiuis complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends with access door any radiuis complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) junction single, (single T) complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) junction single, (single T) with access door complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) junction single, (single T) complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) junction single, (single T) with access door complete all as specified and as directed.

M&L for cutting holes in stone masnory built in cement mortor and making good in CM 1:3 or in cement concrete 1:2:4 tupe B1 as required superficial area exc 150 sq cm but n.exc 400 sq cm complete all as specified and as directed.

Supply and fix in repairs Vitreous china premium/ 1st quality one piece flora floor mount western commode for bath room made of ceramic with S-220 Trap of star white colour oval shape floor mount EWC of included components of flushing cistern, fitting in fitted condition ,wax ceal,floor fixing screws,seat cover of model No Hindware 2010731SW_1 or similar type complete all as specified and as directed.

Supply and fix in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel

gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified and directed. S&F 10 lit Vitreous China valveless,syphonic action type,flushing cistern, low level,white, with inlet, ball valve,float and handle including brackets all as specified and directed.S & F in repairs Plastic water closet seat, black, recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs vitreous china squating pan orrissa pattern size 580 x 440 mm white with integral foot rest , including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythene of loe or high density or PVC 32 mm dia, , closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F Continental wall hung basin of size 560x415x200 mm with full pedestal with fixing accessories of Jaquar Code: (CNS-WHT-801+CNS-WHT-301) complete all as specified and as directed.

S&F Brass CP mixer as pillar taps for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repairs stainless steel pressed single bowl sink ,single drain board with waste coupling stainless steel AISI 304 grade 18/8 Stainless Steel for rust proof, over all size 1040x508x250 with small bowl size 508 mm X 406mm X 254 and PVC waste pipe of 38 mm bore and 1.0 m long complete all as specified and as directed. Make : Hindware, Everado, Handmade designer sink

S&F in repairs ktichen sink made of stainless steel 1mm thick with drainage board or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460 mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repairs 40 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S & F for Wall Mixer with Provision for overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges complete all as specified and as directed. Make :- Jaquar Code No CQT-CHR-23273UPR

S/F CP Angular stop cock 15mm complete all as specified and as directed. Make: Jaguar Cat No :CQT-CHR-23053

S & F in repairs white Toilet paper holder with flat recessed type stainless steel with brass chromium plated stainless steel screws complete all as specified and as directed

S & F Chromium plated two way bib cock with flanges complete all as specified and as directed. Make : Jaguar Cat No DRC-CHR-37041

M&L for chromium plated bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed in repairs complete all as specified and as directed.

S & F Soap dish holder complete all as specified and as directed. Make : Jaguar cat No AKP-CHR-35731

S&F brass coat hooks, solid body, 175mm to 250 mm complete all as specified and as directed.

S & F Bathroom mirror cabinet with mirror / ABS Bath room storage organiser / Multipurpose shelf / wall mount mirror cabinet for wash basin (14 inchx18 Inch) complete all as specified and as directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F cornner glass shelf of size 9"*9" shelf and frond,circle in design fixed over chromium plated brackets of heavy duty with frond linings with glass fixed in wall with necessary screws complete all as specified and as directed. Make : Jaquor ACN CHR 1173

S & F single flow over head shower 100mm dia chromium plated fancy type bottom with rubber holes all as specified and directed fixed in repairs complete all as specified and as directed. Make : Jaquor code OHS-CHR-1989

S&F in repairs glass shelf 600 mm long fixed to wall Cat No: 7771 of JAGUAR or equivalent as approved by GE complete all as specified and as directed.

Dismantling/removing the textile coverings and cover fillets complete all as specified and as directed.

M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for landings, cover slabs (for man holes etc.) chullah hoods, chajjas,water troughs,mangers, shelves and similar articles with plain faces manhole cover slabs including necessary form work and set in CM (1:4) complete all as specified and as directed.

Demolition of plain cement concrete of any description in any position as in padding concrete, sunken slabs coping, benching, kerbs or mud stops etc and removing the debris outside MOD allas complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:3 on concrete roof slabs including mixing water proofing compound at 3% by weight of cement (but excluding the cost of cement), finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, using water proofing compound at 3% by weight of cement but excluding the cost of WPC ( water proofing compound should be measured and paid seperately) complete all as specified and as directed.

M&L for cleaning the roof surface and applying oil bond bitumen primer @ 0.20 kg/sqm providing and laying 4 mm thick APP modified water proofing membrane weight not less than 4 kg/sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm having soften point not less than 140 degree centigrade tensile strength not less than 800/N/sqm cum tearing strength 180N with minimum of 10 cm side laps and 15cm end laps by application of torch applying a coat of blown grade hot bitumen over the membrane @ 1.2 kg/sqm and providing garnish with solar reflective bitumen aluminium paint @ 0.1 kg/sqm over completed area of membrane complete all as specified and as directed.

Supply only integral water proofing compound as per manufactures instruction complete all as specified and as directed.

M & L 25mm Harrison rails, mild steel, chromium plated,stainless steel with fixing brackets, stops, rollers etc complete all as specified and as directed.

M & L in repairs for brass chromium plated Brackets, Ends Cap and Holder suitable for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality frosted fixing with putty in squre n.exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 1st class hard wood beads, straight (any size) for glazed or guaged joinery, renewed, including mitres etc. and removing old beads complete all as specified and as directed.

S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stain less steel wire staples complete all as specified and as directed.

Taking down chowkats with shutter ( without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and as directed.

S & F for Pressed steel frames (size 125x60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified and as directed.

S & F for Pressed steel frames (size 105x60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed comple

te all as specified and as directed.

M&L for PCC 1:3:6 type B1 (using 20 mm graded stone aggregate) as in cills, copings, apex stone, bed plates kerbs levelling course including waethering, slightly rounded or chamfered angles and throating as directed including mixing water proofing compound (but excluding the cost of WPC) as per manufacturers instrucions complete all as specified and as directed.

S&F 35 mm thick flush shutter solid core construction with black board core and ply wood face panels commercial type on both sides complete all as specified and as directed.

S & F for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8 , Clause 8.24 (a), supplied & fitted to chowkats complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including frame complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with stain less steel wire staples complete all as specified and as directed.

Taking down chowkats with shutter ( without taking off shutters from the frame) n.exc 1.5 Sqm each incl steel windows and ventilators complete all as specified and as directed.

M&L preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm),sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and as directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.

Area not exceeding 2.00 sqm each

Area exceeding 2.00 sqm each

S&F Sheet glass, ordinary quality 4.8mm thick and glazing with rubber to UPVC frame in square/rectangle exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing complete all as specified and as directed.

S&F frosted Sheet glass, ordinary quality 4.8 mm thick and glazing with rubber to UPVC frame in square/rectangle n exc 0.5 sq. m in each pane complete all as specified and as directed.

S & F in repairs Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

S & F in repairs Factory made single extruded WPC(Wood Polymenr Composite) solid door/window/Ceosetory windows and other Frames/chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated witgh miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame densityy of 750 kg/cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), miimum compressive strength of 58 N/mm2, modules of elasticity 900N.mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of requred dia and length complete as per direction of Engineer-in-charge. (M.S hold fast/lugs or SS dash fasteners shall bne paid for separately) manufacturers instructions complete all as specified and as directed.

S&F in repairsFactory Made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powedr/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face ) and 900 N (Edge), minimum compressive strength 50 N.mm2, modulus of elasticity 850 N.mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hings of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed.

S&F 100 mm long MS butt hinges, medium weight cold rolled complete all as specified and as directed.

S & F Continuous (piano) hinges of width of flop 30 mm mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150 mm long extruided aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type ) and fixing clips of cast or extruded section and fixing bolts and sliding blots of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specif

ied and as directed.

S&F 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Dismantling of wall boards (fibre, Pulp, insulation, plywood etc.) as in cup boards, shelve, pelmet boxes etc complete all as specified and as directed.

M&L for 25 mm thick high density high moisture resistenance board(HD HMR) exterior grade complete all as specified and as directed.

M&L for 12mm thickhigh density high moisture resistenance board(HD HMR) exterior grade complete all as specified and as directed.

M&L for 18/19 mm thick high density high moisture resistenance board(HD HMR) exterior grade complete all as specified and as directed.

S&F Decorative laminate 0.9mm type 1 of surface finish glossy, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction complete all as specified and as directed.

S&F soft closer telescopic drawer channel of any length of bearing 45 kg capacity with 100% extension strong and smooth operation for wooden and metal drawers in kitchen,ward robe etc as per requirement complete all as specified and as directed. Make : Godrej or equivalent

S&F stainless steel bright chromium plated cabinet & drawer handle 6" long complete all as specified and as directed. Make : Hettich or equivalent

S&F cabinet auto hinges soft close 4 hole full over lay suitable for 14-25 mm thick panel with 105 degree opening suitable for as in kitchen drawers and cupboards complete all as specified and as directed. Make :Godrej , Hettich or equivalent

S&F stainless steel modular kitchen baskets any size/any type fixing complete all as specified and as directed.

S&F magnet catcher for cupboard complete all as specified and as directed.

S & F in repairs Stainless 6 Layer wall mount Steel plate rack of size 39" inchx39 Inch made with 22 gauge sheet and weight not less than 11 Kg, complete all as specified and as directed.

S&F powder coating aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F poweder coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed.

S&F Sheet glass, 4.8 mm ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane complete all as specified and as directed.

Supply and fixing for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

S & F False Ceiling Frame Work using Poweder coated Aluminium snap grid of size 605 x 605 mm size of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 605 x 605mm suspended with 6mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc fixed in ceiling with clips to aluminium snap grid for fixing 12mm thick gyprock false ceiling boards fixed to ceiling frame work complete all as specified and as directed. (Ceiling board measured and paid seperately).

S &F 12 mm thick gyprock false ceiling boards decorative type of suitable size to fixed in poweder coated aluminium /GI /wooden framework etc in ceiling with necessary screws complete all as specified and as directed.

M&L for preparing ceiling surfaces including rubbing with sand paper to obtain smooth surfaces and applying two coats of oil bound distemper over one coat of pimer on ceiling complete all as specified and as directed.

Dismantling plain or corrugated AC/ steel sheeting,any gauge, thickness,including nanital or similar pattern roof coverings complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F steel work in Tubular Roof trusses,trussed, purlins, rafters including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S 1161 1979 grade st 240 complete all as specified and as directed.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Preparing old steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for cement concrete 1:4:8 , type D-2 using 40 mm graded stone aggregate as in fdn , filling and mass concrete complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

M&L Anti termit treatment Of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed.

M&L antitermite treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

per cm depth

E/M PORTION : Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surfacecomplete all as specified and as directed.

Taking down unserviceable MCB DBs, Metal clad DBs along with MCBs of any description and making good the disturbed surfaces of walls to match with existing sorrounding wall finish complete all as specified and as directed.

Taking down unserviceable Security light of any description including service bracket, clamps nut bolts etc complete all as specified and as directed.

One light point controlled by one one way switch complete all as specified and as directed.

One light point controlled by one two way switch complete all as specified and as directed.

One ceiling fan point controlled by one one way switch complete all as specified and as directed.

One Exhaust fan point controlled by one one way switch complete all as specified and as directed.

per Pair

One 3 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed.

One 3 pin socket outlet 5 Amps on the Independent board complete all as specified and as directed.

One bell/buzzer point controlled by one push button on the same board with other

switches or independent complete all as specified and as directed.

M&L for Modular switch 6A, 1 way complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

M&L for Modular switch 6A, 2 way complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

M&L for Modular switch 16A, 1 way complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

M&L for Socket outlet 6A modular complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

M&L for Socket outlet 16A modular complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

M&L for switch bell push modular complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

M&L for Stepped type fan regulator(4steps), 120 W- 2 modular complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

S&F Electric bell/ buzzer 230 volts, single pole, 240 V complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

S&F ceiling rose, 3 terminal, PVC/Polycarbonate isolated body complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

M&L for Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

S&F LED Bulb Pin type of 9 Watt complete all as specified and as directed.

M&L for Modular Telephone socket complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

M&L for Modular TV socket complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

Point wiring complete with two runs of 1.5 sq mm single core PVC insulated FRLS cable 1100 volts grade with multi-stranded copper conductors, drawn through and including non metallic med. grade rigid PVC conduit with all conduit accessories and including provision of 1.5 sqmm PVC insulated FRLS copper cable as earth continuity conductor, fabricated steel teminal box made out of 1.60 mm thick MS sheet concealed in walls and covered with 3 mm thick hylum sheet for fixing the switches / sockets/ regulators etc. complete all as specified and as directed for :-

M&L PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in terrace (padding layer) including water proofing compound finished even surface complete all as specified and as directed. Note: Paid and Measured water proofing compound seperately.

One light point controlled by one way switch .

One ceiling fan point controlled by one way switch.

One 3 pin socket outlet 5 Amps on the same board with other switches.

One 3 pin socket outlet 5 Amps on the Independent board.

S&F Switch piano flush type 5/6 Amps single pole one way 230 Volts complete all as specified and as directed. Make : Anchor / Havells/ Legrand/ Crabtree.

S&F Switch socket combination 2 in 1, 3 pin 5 Amps flush type 230 Volts complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

S&F Switch socket combination 2 in 1, 3 pin 16A, flush type 230 Volts complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

S&F Stepped type electronic fan regulator flush type on laminated sheet for 1200 mm sweep fans complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

M&L for rigid non- metallic PVC conduit inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, sadles, pipe hooks etc. of size 20 mm dia for Tele & TV points complete all as specified and as directed.

S & F in repairs, wall mounted 10W LED 6K light fitting, 2" with extruded Al , heat sink, integral driver, energy efficient, ready to use pack etc, complete with all accessories internally pre wired and fixing the same on and including two Nos, PVC Block and Connecting up with twin core twisted flexible copper conductor cable of suitable size up to ceiling rose including taking down old one complete all as specified and as directed. Make: Havells, Model LUMILINEBS10WLED865SPCWH or equivelent in Philips / CG.

S & F in repairs, wall mounted 22W LED 6K light fitting, 4" ultra slim, with extruded Al , heat sink, integral driver, energy efficient, ready to use pack etc, complete with all accessories internally pre wired and fixing the same on and including two Nos, PVC Block and Connecting up with twin core twisted flexible copper conductor cable of suitable size up to ceiling rose including taking down old one complete all as specified and as directed. Make: Havells, Model LUMILINEBS22WLED865SPCWH or equivelent in Philips/CG.

Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable, with multi-stranded copper conductor cable, 1100 Volts grade, drawn through and including non metalic medium grade, rigid PVC conduit with all conduit accessories, provision of 1.5 sq mm PVC insulated copper cable FRLS as earth continuity conductor, company fabricated GI sheet steel terminal box suitable for Modular switches concealed flush to walls with front cover & base frame, screws, suitable for housing modular switches, socket outlets, fan regulators etc complete all as specified and as directed for the following :-

Each Set

All as per item No 167.00 here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed.

M&L for Taking down ceiling fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, including reassembling blades and hanging ceiling fan and connecting up including provision of cable from ceiling rose to connector of fan complete all as specified and as directed.

Dismantle the unserviceable rubber bush with clamping set, supply and fix rubber bush with clamping set, GI bolt, nut and split pin complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including taking down existing water heater and deposit to E/M Store complete all as specified and as directed. Make:- Venus or equivalent in havells/CG

Sub main wiring complete with two runs of 6.0 Sqmm single core PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable with one run of 6.0 Sqmm single core, PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable as earth continuity conductor, drawn through and including suitable size of non-metallic rigid PVC conduit and conduit accessories concealed in any type of wall including stone masonry, floors / fixed to ceiling etc including taking down old wiring of any desc complete all as specified and as directed. Note: Two runs of 6.0 sqmm cable conductor, one run of 6.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.

Providing suitable hole in stone masonary wall including taking douwn and refixing of Exhaust fan of 230 mm sweep and repair to the wall to give smooth finish as existing to the disturbed surface of wall complete all as specified and as directed.

S&F new louvers in repairs suitable for existing exhaust fans of size upto 450 mm sweep complete all as specified and as directed.

S&F MCB distribution board sheet metal powder painted Single pole & Neutral enclosre with a two pin and earth plug and socket, one single pole MCB of 20 Amps complete all as specified and as directed. Make: Havells/Legrand/Schneider

M & L for sheet metal enclosure for vertical distribution board when MCCB for in coming and MCBs for out going to be used VTPN 4 way , 415 volts double door complete including complete all as specified and as directed. Note :- MCCB and MCB will be measured and paid separately under relevant items.

S&F MCB distribution board double door type, SPN 8 way sheet steel powder painted with bus bar neutral link earth bar etc complete all as specified and as directed. Make-Havells/Legrand/Schneider

S&F MCB distribution board double door type, SPN 4 way sheet steel powder painted with bus bar neutral link earth bar etc complete all as specified and as directed. Make-Havells/Legrand/Schneider

S&F MCCB 3 pole, 415V, fixed type, 63 Amps with breaking capacity 16 KA complete all as specified and as directed. Make-Havells/Legrand/Schneider

S&F MCB SPN 40 Amps, 240 volts suitable for fixing in MCB DB 'C' series complete all as specified and as directed. Make-Havells/Legrand/Schneider

S&F MCB SP 5 to 32 Amps, 240 volts, suitable for fixing in MCB DB 'C' series complete all as specified and as directed. Make-Havells/Legrand/Schneider

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminium housing and heat resistent complete with driver, lampbracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Make-Havells equivalent in Philips/CG

M&L for Earthing complete with galvanised cast iron steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the earth plate not less than 1.5mtr below normal ground level, connected to galvanised earth leadwire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel as earth electrod with top edge of earth plate not less than 1.5 mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI Light grade 15mm dia from earth plate to main switch board/panel,watring pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil remaining surplus excavated meterial all as required at site and specified in electrical plate No 5 of SSR part I 2009 complete all as specified and as directed.

Supply and fixing of electric chimney capacity of air flow of 1250 Cum/hr of size of 90 cm specifications of heat auto clean with motion sensor, auto off function, touch sensor controll, brushless DC motor 9 speed control, oil collector tray, electric light LED, filter less chimney coplete all as specified and as directed.