Construction of toilets wooden property racks for students in night reading hall and repairrenovation of toilet attached with the chamber of the University Librarian special repair to cycle stand in the premises of Nehru Library at CCSHAU Hisar

Amount

Civil item (1 to 32):- Loading , unloading for sand /earth/ building rubbish (HSR 4.1)

Disposal of surplus excavated soil with a lead of 2 K.M. excluding loading, unloading (HSR 5.2(b)}

Dismantling concrete{HSR 8.6(e)} (e) reinforced cement concrete with cleaning and straightening and cutting of bars if required

Dismantling asbestos cement celotax or other hard-board ceiling or partitions walls including supporting timber {HSR 8.15}

Dismantling cement conglomerate/ terrazzo floors 25mm to 50mm thick including concrete base. {HSR 8.25}

Scraping (c) Cement plaster (HSR 8.32 (c))

Cement concrete 1:8:16 with stone aggregate 40 mm nominal size in foundation and plinth. (HSR 10.28)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level {HSR 10.59}

Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate with 2 coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded {HSR 10.114}

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in pavements, roads, taxi-tracks and runways, laid to required slope and camber, including consolidation, finishing and tamping complete. {HSR 10.132}

First class brick work laid in cement sand mortar 1:6 in foundation and plinth {HSR 11.2}

11.43 cm thick brick wall laid in cement sand mortar 1:4 in superstructure {HSR 11.48(a)}

Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling (HSR 14.1)

Providing and fixing ceramic tiles/ anti skid tiles of size 400 mm x 400 mm or above size of approved make in flooring, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI & RAK. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this. {HSR 14.91}

Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colour, shades except burgundy, bottle green, black of any size of approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement coarse sand mortar 1:3 and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete {HSR 14.92(a)}

15 mm thick cement plaster 1:4 on the rough side of single or half brick wall. {HSR 15.10}

10 mm thick cement plaster 1:3 {HSR 15.46}

Painting two coats with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint {HSR 16.5}

White washing three coats {HSR 16.48}

Providing and fixing plywood, plain lining, butt-jointed, including, wooden plugs (Teak), placed at 45 cm to 60 cm centres, complete with necessary nails (frame work shall be payable extra)- (f) 6mm thick commercial ply wood. {HSR 17.47(f)}

Providing and fixing Aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS;733 and IS; 1285 fixed with raw plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. aluminium sections shall be smooth rust free straight mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling C.P. brass/ stainless steel screws, all complete. {HSR 17.95}

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS; 733 and IS;1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. Aluminium sections shall be smooth, rust free straight mitered and jointed mechanically wherever required including clear angle, Aluminium snap beading for glazing/ paneling C.P. brass/ stainless steel screws, etc. complete. {HSR 17.96}

Providing and fixing 12 mm thick pre laminated particle board flat pressed three layer or graded wood particle board conforming to IS;12823 grade I type II in paneling fixed in aluminium doors. Windows shutters and partition frames with c.p. brass/ stainless steel screws etc. complete.{HSR 17.97(b)} (b) Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc. with PVC/ neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items). {HSR 17.98(b)} (b) With float glass panes of 5.00 mm thickness.

Providing fixing aluminium round shape handle of outer dia 100 mm with screws etc. complete. (i) Anodized (AC-15) Aluminium. {HSR 17.102(i)}

Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position in :- {HSR 18.1(b)} (b)M.S. Flats

Tacking (making rough) the exposed reinforced cement concrete surface for cement plaster (horizontal and vertical surface) including removing of loose concrete, disposing off the malba and cleaning the surface etc., complete in all respect as directed by Engineer-in-Charge.(NS)

Providing and applying two coats of Dr. Fixit Pidicrete URP – SBR Latex (Pidilite make) solution made of URP + cement in the proportion of 1:1.5 (as recommended by the manufacturer) on deteriorated concrete surfaces of slab and columns, complete in all respects as directed by the Engineer-in-Charge.(NS)

20 mm thick cement plaster 1:3 at all height (horizontal/ vertical surface) in two coats. First layer 10mm thick 1:3 with cement plaster( one cement : 3 coarse sand) and second layer 10 mm thick 1:3 (one cement : 3 fine sand), complete in all respect as directed by the Engineer-in-Charge.(NS)

Providing and fixing marble strips of size 14 mm to 17 mm thick and 65 mm wide in cement concrete pavement fixed in position, complete in all respects as per drawing and design or as directed by Engineer-in-Charge.(NS)

Providing and fixing 0.60 mm thick high strength galvanished colour coated steel sheets having trapezodial profiles of approved make (ISI mark) in roofing, at all height, fixed in position with self drilling screws of approved shape and make, complete in all respect as per drawing and manufacture's specifications and instruction of Engineer- in- Charge. (NS)

Providing and fixing wooden rack of size 1'-6" deep and 6'-0" hight consisting of following :- (i)19 mm thick wood polymer composite (WPC) panel of approved make having equal compartments of size 1'-6" x 1'-6." (ii)1 mm thick plastic laminated sheet of approved make (Century, Green, Duro) shade and colour on all visible portion except back (iii) 9 mm thick BWR grade-II playwood (ISI marke) of approved make on back side of rack. (iv) angle iron of size 40 mm x 40 mm x 6 mm @ 3'-0" C/C embeded in cement concrete 1:2:4 blocks after making khudas in wall and M.S. flat of size 40 mm x 6 mm at top of rack @ 3' -0" C/C. (v) Including cost of cutting, nails,screws, gutties, rawl plugs, fevicol, petty items etc. fixed in position complete in all respect as per architectural drawing and design.(NS)

PH items (33 to 99):- Excavation of trenches in streets, lanes or in open areas for storm sewer, sewers running by gravity and manholes to full depths as shown in drawing including shoring, timbering of poling boards, frame system type, dressing to correct sections and dimension, according to templates and levels, dewatering, provision for diversion of traffic, cutting trees and bushes, etc., night signals, profiles, pegs, sight rails, boning rods, crossing over trenches, for access to the houses, watching, fencing, etc., fixing and maintenance of caution boards, refilling of trenches, watering of refill, in 15 cm layers, ramming and restoration of unmetalled or unpaved surface to original condition and removal of surplus soil, from site of work, up to a lead of 1 K.M. in ordinary soil {HSR 6.10(a)} (a) for depth of excavation not exceeding 3 metres below ground level

Dismantling cement conglomerate/terrazzo floors 25 mm to 50 mm thick including concrete base. (HSR 8.25)

Dismantling white or coloured glazed tiles (to be carefully removed) (HSR 8.38)

Cement concrete 1:8:16 with stone aggregate 40 mm nominal size in foundation and plinth. (HSR 10.28)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level (HSR 10.59} (at first floor)

Cement concrete 1:2:4 with stone aggregate 20mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement , but including centring and shuttering, laid in position , complete in all respects (HSR 10.82) (at first floor)

Extra over item Nos.10.79 to 10.94, if 1:1½:3 mix is used instead of 1:2:4. {HSR 10.95(a)}

Providing and lying cinder concrete in cement 1:15 (1 cement and 15 cinder) on terraced roofs & ( Ist storey) , laid to slope , including consolidating the same (HSR 13.66) (i) first floor

Providing and fixing ceramic tiles/ anti skid tiles of size 400 mm x 400 mm or above size of approved make in flooring, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles (HSR 14.91) Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI & RAK. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this (at first floor)

Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colour, shades except burgundy, bottle green, black of any size of approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement coarse sand mortar 1:3 and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete (HSR 14.92) (a) size of ceramic glazed tiles 200 mm x 300 mm (at first floor)

Painting two coats with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint (HSR 16.5)

White washing two coats (HSR 16.47)

Fe-500 D TMT steel bars for R.C.C., works, where not included in the complete rate of R.C.C. , including bending ,binding and placing in position complete (HSR 18.22)

Labour for laying, jointing, fixing and testing G.I./P.V.C./W.I. pipe lines and specials tees, bends, sockets elbows etc. inside building and testing etc. complete including cutting threading. {HSR 28.18(b)} INCLUDING COST OF SPECIALS (i) 15 mm internal diameter of pipe line

(ii) 20 mm internal diameter of pipe line

(iii) 25 mm internal diameter of pipe line

Extra for fixing and jointing union couplings in G.I and W.I pipe lines. {HSR 28.21} (b) 20 mm internal diameter

(c) 25 mm internal diameter

Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. (HSR 28.24) (a) 11.43 cm thickness of walls

(b) 22.86 cm thickness of walls

Cutting holes up to 23 cm square for pipes in floor and roofs of cement concrete reinforced concrete or reinforced brick work and making good including repointing, replastering, replacing bitumen and colour or white washing where required. {HSR 28.26(b)} (b) 115 mm thickness of roof of floor

Fixing and jointing gun metal peet valves (heavy pattern) with hand wheels, on G.I pipelines laid in the ground or inside buildings including cartage from divisional stores or nearest railway station to site of works. {HSR 28.29} (b) 20 mm internal diameter

(c) 25 mm internal diameter

Making connection with the existing G.I branch main up to 40 mm size including cutting and threading pipe etc., complete excluding cost of tee and long screw, but including cartage of material to site. (HSR 28.34)

Constructing brick masonry inspection chambers sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 percent lime mortar2:3 in foundation cement concrete 1:2:4 benching 12 mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/C.C. topping. 50 mm thick with 455 mm x 455 mm/ 455 mm x 610 mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I specification painted with 3 coats of black bitumastic superior paint complete as per standard design. (HSR 29.84) (c) size 600 mm x 900 mm inside ( with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg. With R.C.C. slab)

Providing slat glazed stone ware pipes grade ‘A’ in standard length of 600 mm each pipe marked with is: 651 and their lowering, cutting, jointing and testing as desired in HSR item No. 29.38, 29.39, 29.40, including the cost of jointing materials as well as carriage, loading, unlloding stacking, handing, re-handling etc. complete in all respects to the satisfaction of Engineer-In Charge. (HSR 29.95) 150 mm internal dia

Providing and fixing in position best Indian make European type water closet suite with concealed ‘P’ of ‘S’ trap with or without vent (as approved by the Engineer-in-Charge) and all other necessary fittings as fully described in item No. 30.3 above (excluding cost of C.I. high level cistern) White based on {based on HSR 30.6 (a) (i)}

Extra over item no. 30.3 to 30.6 for providing and fixing best Indian make plastic hygenic seat with lid complete instead of hollow black or white plastic seat and lid. (HSR 30.13) (i) White plastic seat ( Solid)

Extra for providing and fixing 32 mm dia. G.I/ C.P flush pipe complete with accessories instead of 32 mm dia. Galvanised telescopic flush pipe with clips ( as required by the Engineer-in-charge) (HSR 30.15) (b) 32mm dia C.P brass flush pipe

Providing and fixing in position best Indian make a range of two urinals large flat back or angular lipped front 610 mm high in vitreous china-ware with 5 lit capacity best Indian make C.I automatic flushing cistern with fittings and flush pipe etc. complete as fully described in item no. 30.25 above, {HSR 30.26(i)} Range of two urinals (i) White

Extra for providing and fixing vitreous automatic flushing Cistern including fittings and brackets of C.I. flushing cistern complete {HSR 30.37(b)} (b)10 ltr. capacity cistern (i) white

Extra for providing and fixing standard size C.P. brass flush pipe complete with fittings instead of G.I flush pipe complete {HSR 30.38) (ii) For a range of two urinals

Providing and fixing 25 mm thick marble partitions for different type of urinals.{HSR 30.40(b)(II) (i)} (b) Vitreous Chainaware Partition Plate (II) LARGE SIZE 835 mm x 355 mm (i) White

Providing and fixing in position best Indian make Lavatory suites (with full anti splash rim in vitreous chinaware and all other necessary fittings as fully described in item No.30.41 above. White {HSR 30.42(ii)} ii.) Size 530mm x 430mm with one No. tap

Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall or lead waste pipe (weighing 3.47 kg per meter and 2.8 mm thick) up to floor level including cost of wipped solder joint etc., complete (as required by the Engineer-in-charge) (HSR 30.48)

Providing and fixing in position best Indian make chromium plated brass bottle trap 32 mm diameter (HSR 30.50)

Providing and fixing in position best Indian make towel rails fixed in with rawlslugs embedded in walls with C.P brass screws. Complete in all respects including cutting and making good the walls etc.{HSR 30.68(a)(ii)} (a) 25MM DIA. C.P BRASS ADJUSTABLE (ii) 600mm long

Providing and fixing in position best Indian make soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the walls etc. {HSR 30.70(a)(i)} (a) C.P. BRASS (i) soap dish large

Providing and fixing in position best Indian make bevelled edge 5.5 mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P brass screws ( as required by the Engineer-in-charge) complete including cutting and making good the walls etc.{HSR 30.71(a)(i)} (a) INDIAN MAKE (i) 600mmx450mm

Providing and fixing in position best Indian make coat and hat hooks fixed into wall with C.P brass screws and rawl plugs etc. complete including cutting and making good the walls etc. {HSR 30.73(a)(ii)} (a) C.P. BRASS (ii) two way

Providing and fixing in position 15 mm i/d C.P brass bib cocks of best quality ( as required by the Engineer-in-charge) {HSR 30.75 (c)} (c) bib cock

Providing and fixing in position C.P brass stop cock (as approved by the Engineer-in-charge) {HSR 30.76(a)(ii)} (a) 15 MM STOP COCK (ii) concealed stop cock with flange

Providing and fixing in position best Indian make C.P brass inlet connection 15mm with 375mm pipe and C.P brass nuts. (HSR 30.83)

Providing and fixing in position H.C.I soil waste vent or antisyphonage pipes to I.S.I specifications of E.L.C manufacture or of any other reputed firm including cutting and wastage etc. and cutting holes in walls, roofs or floors etc. and making good to its original condition but excluding cost of lead jointing. {HSR 30.84 (a & b)} (a) 100 mm internal diameter

(b) 75 mm internal diameter

Providing lead caulked joints to H.C.I pipes and specials conforming to I.S.I specification of E.L.C manufacture or any other reputed firm including cost of lead yarn, fuel and tools etc. {HSR 30.87(a &b)} (a) 100 mm internal diameter

(b) 75 mm internal diameter

Providing and fixing H.C.I. floor traps I.S.I. marked of the self cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under the around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors, etc., minimum depth of water should be 150 mm with a minimum seal of 50 mm {HSR 30.89(b)} (b) With 75 mm internal dia outlet

Providing and fixing in position H.C.I specials for soil, waste, vent or anti-syphonage pipes to I.S.I marked including cutting and wastage etc/., and making good to its original condition but excluding cost of lead jointing. {HSR 30.91} (a) For 100 Mm I/D Pipes (xiii)bend with door

(xiv) bend plain

(b) For 75 Mm I/D Pipes (xiii) Bend with door

(xiv) Plain bend

Cutting chase in brick walls in cement or in floor for embedding G.I. or H.C.I. pipe lines and making good the same to its original condition {HSR 30.95(a) (a)size 75 mm X 75 mm

Providing and fixing in position automatic brass ball valves in tanks {HSR 30.110(b)(iii)} (b) WITH PLASTIC BALL (iii) 25 mm internal diameter

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with H.C.I. grating 150 mm X 150 mm cast iron cover weighing approximately 7.26 kg. and frame clear opening 300 mm X 300 mm and outside size 330 mm X 330 mm and chamber including cost of all brick work in cement mortar 1:5 cement concrete 1:8:16 in foundations, and cement concrete 1:2:4 in coping around C.I. cover and frame et. With three coats of black bitumastic superior paint of approved manufacture on all C.I. work as per standard design, minimum depth of water should be 150 mm with a minimum seal 50 mm {HSR 30.114(b)} (b) 100 mm internal diameter H.C.I. gully trap

Providing and fixing HDPE WATER STORGE TANKS of sintex, diplas O.K. Supreme make with covers/ lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-in- Charge. {HSR 30.119) 1000 ltr,. capacity

Supply of GI pipe 'B' Class ISI Marked Ravindra/Jindal/BST/Parkash(Surya) Make. (NS) (i)15 mm i/d

(ii)20 mm i/d

(iii)25 mm i/d

Supply of Gun Metal Peet Valve ISI Marked of DRP/Leader/Bajaj make (NS) (a) 20 mm i/d

(a) 25 mm i/d

Supply of GI Union Couplings of UNIK/UNCO make . (NS) (i) 20 mm i/d

(ii)25 mm i/d

Providing and fixing in position PVC flushing cistern 8.0 ltrs. capacity of Hindware/Perryware/Cera make ISI marked, white, alongwith fittings complete in all respect. (NS)

Providing and fixing CP brass jet along with flexible pipe 15mm i/d and patti etc. of best quality complete in all respects (excluding cost of CP brass concealed stop cock).(NS)

Providing and fixing 15 mm to 18 mm thick Z-Black granite stone (polished) on worktop laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade including rubbing and polishing, complete. (NS)

Providing and applying two coats of Dr. Fixit Pidicrete URP – SBR Latex (Pidilite make) solution made of URP + cement in the proportion of 1:1.5 (as recommended by the manufacturer) on deteriorated concrete surfaces of slab and columns, complete in all respects as directed by the Engineer-in-Charge. (NS)

Electrical items (100 to 115):- Supply & erection of fittings & accessories: (HSR 31.18) (xi) Bakelite angle/straight button holder large size.

Supply and erection of PVC pipe of 6Kg pressure laid in 1 mtr below ground level complete i/c digging refilling of the trench with jointing etc.( HSR 31.21 ) (xv) Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness on surface.

(xxi) Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness on flushed.

S/E of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe.( HSR 31.40 ) (i) Cable Size 1.5 sqmm (3/0.81)

(iii) Cable Size 4 sqmm (7/1.35)

Pdg. & fixing modular type accessoriesm of app. Make in existing box including fixing and making necessary connections complete in all respect.( HSR 31.56 ) 10 amp. 1 way switch

20 amp. Switch

10 amp. Socket

16 amp. Socket

Fan Regulator

Blinking plate

Pdg & fixig GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate with all labour and matrial required for the job.(HSR 31.57) (iii) 3 Modules

(iv) 6 Modules

(vi)12 Modules

Providing and fixing plywood, plain lining butt-jointed, including, wooden plugs (Teak), placed at 45 cm to 60 cm centres, complete necessary nails. (HSR 17.47) (h) 12 mm thick commercial ply wood.

Supple of propeller type AC ventilating fan (exhaus fan) with necessary earthing aarrangements of fan with shutter complete in all respects. (NS) (i)Size 300 mm (12") sweep Make:-Usha, Orient, Khaitan, Havells.

The Narayan Cooperative Multi Purpose Society Ltd