GE (N) P/TOKEN- 55 OF 2019-2020 REPAIRS AND MAINTENANCE TO INTERNAL ELECTRIFICATION, FAN AND GEYSER IN KOLHAPUR MILITARY COMPLEX UNDER GE (NORTH) PUNE

Amount

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed.

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(d) One bell point controlled by one, bell switch 5 Amps

(e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(f) One light point controlled by one, two way switch 5 Amps

Description all as per item No 4 here in before but using 2.5 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(d) One bell point controlled by one, bell switch 5 Amps

(e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

Description all as per item No 6 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

S & F for Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for Modular Switch Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F for for Bell push modular 6 Amps single module complete all as specified.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

S & F for for Lamp holder, PVC body of brass suitable for batten fitting completes all as specified.

S & F for Ceiling rose, surface Bakelite suitable ISI marked for batten fitting complete all as specified

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit

S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F MCCB TPN 415 volts 25 KA suitable for fixing on DB of capacity 63 to 100 Amps with extended terminals complete all as specified.

S & F for MCB tripple pole and neutral rated capacity 63 A, 415V breaking capacity 10 KA complete all as specified and as directed.

S & F for MCB Single pole and neutral rated capacity 5 to 32 A, 240 V breaking capacity 10 KA complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 V breaking capacity 10 KA complete all as specified and as directed.

S & F wall mounted LED 18 watts, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including necessary LED tube 4' x 18 watts complete all as specified and as directed. Make Bajaj Cat part No BLRB-DB118 & BLRB 18W CW or its equavalent in Philips, Wipro, Havells.

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and including provosion of LED bulb 10/11 watts complete all as specified and as directed. Make- Havells Cat part No -LHGLO6160099 or its equivalent in Wipro, Philips, Bajaj.

S & F for LED 10 watts batten aluminium extruded with decorative end caps complete for mirror light fitting all as specified and as directed. Make- Bajaj Cat Part No BCLSB 10 NW or its equivallent model in Wipro, Havells, Philips.

S & F Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :- Bajaj Cat No BIBWP 10W LED or its equvalent in Philips, Wipro, Havells.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 15 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade required dia 1.5 mtr long bend to required shape complete all as directed by Engineer-in-Charge. Make- Bajaj Cat part No - BCLST 15W LED or its equivalent in Wipro, Havells, Philips

S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply including removal of old unserviceable one complete all as specified and as directed

S& F for Bell buzzer type suitable for operation on 230 volt 50 HZ A C supply including removal of old unserviceable one complete all as specified and as directed

S & F for casing and capping size 25 mm including removal of old unserviceable one complete complete all as specified and as directed

S & F for casing and capping size 20 mm including removal of old unserviceable one complete all as specified and as directed

S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module including removal of old unserviceable one complete all as specified and as directed.

S & F for Switch piano flush type, single pole, one way, and 15/16 Amp single module including removal of old unserviceable one complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, piano flush type 2 module including removal of old unserviceable one complete all as specified.

S & F for Modular Switch Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5 Amp, piano flush type 2 module including removal of old unserviceable one complete all as specified.

S & F for modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply including removal of old unserviceable one complete all as specified and as directed

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply including removal of old unserviceable one complete all as specified and as directed.

S & F for for modular Bell push modular 6 Amps single module complete all as specified.

S & F for for lamp holder, PVC body of brass suitable for batten fitting including removal of old unserviceable one completes all as specified.

S & F for ceiling rose, surface Bakelite suitable ISI marked for batten fitting including removal of old unserviceable one complete all as specified

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 volts breaking capacity 10 KA including removal of old unserviceable one complete all as specified and as directed.

S & F for MCB Single pole and neutral rated capacity 5 to 32 Amps, 240 volts breaking capacity 10 KA including removal of old unserviceable one complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 volts breaking capacity 10 KA including removal of old unserviceable one complete all as specified and as directed.

Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 1.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 2.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 4 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

S & F Ultra bright LED Tubelight 18 watts (single side connection) with very high efficacy suited for installation in existing tubelight G13 lamp holders to give glare free light with necessary wiring and removal old existing unserviceable T-8 tube rod from fitting complete all as specified and as directed. Make- Bajaj Cat part No - BLRB 18W CW or its equivalent in Wipro, Havells, Philips

S & F for LED down light recess mounted luminare, round type 15 watts with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150 V-270 V AC, 50 Hz all as per Make- Bajaj Cat Part No BZSLO 15W NW, Philips Cat Part No DN172B LED9S-6500 PSU of or its equavalent in Wipro complete all as directed by Engineer- in-charge

S & F for LED downlight surface mounted luminare round type 12 watts with inbult driver and polycarbonate opal diffuser white finish operating voltage 230V AC, 50 Hz all as per Cat Part No BGCML 12 01 WH of Make- Bajaj, Philips Cat Part No or its equivalent in Wipro including taking down old unserviceable existing light fitting of any description complete all as directed by Engineer- in-charge.

S & F for recess mounted low depth aesthetically designed LED 2' x 2' flat panels to enchance the delight of occupants with comfortable experience through its classic design and glare free soft illumination, white powder coated CRCA housing with LEDs, seamless front frame with flat white high transmission acrylic cover complete all as specified and as directed. Make- Bajaj Cat part No - BZRSQL 36W GZi WH or its equivalent in Wipro/ Jaquar/ Philips/ Crompton

Supply & lay GI tubing light grade fixed in wall by grouting both sides with PCC as per site requirement for hanging of Ceilng fans of size 40 mm dia bore complete all as specified and directed .

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Attending the complaints of non functional of ceilling/exhaust fan of any sweep and testing and repairing the ceilling/exhaust fan without taking down by replacing of fan condencer, fan regulator and connection wire etc. and making fan serviceable including checking the strengh of Clamp, down rod and provision of check nuts and split pin all as directed. (Note :- Item such as fan condenser, fan regulator, 1.5 sqmm, 3 core copper flexible cable shall be measured and paid seperataly as 'Supply Only'.)

Supply only fan condencer, 2.5 Mfd, 240 volts for ceiling/Exhaust fan including PVC clamp

Supply only fan condencer, 4 Mfd, 240 volts for ceiling/Exhaust fan including PVC clamp

Supply only copper conductor FRLS cable, 1.5 Sqmm, 3 core, 1100 Volt grade

Taking down ceiling fan of any size/ sweep after disconnecting the wire from existing ceiling rose for replacing the under mentioned unsv spares and refixing the same after cleaning all dust, oil etc. complete all as spcified and directed by Engineer-in-charge (Note :-Spares shall be measured and paid seperataly as 'Supply Only'.under item No. 70 to 76 here in below)

Supply only bearing No 6201/6202/6203 suitable for ceiling fans complete all as spcified and directed by Engineer-in-charge

Supply only Armature (Rotor) unit with shaft suitable for ceiling fan 1200 mm sweep of any make as per sample. The rotor shall be made up of a wire coil enveloped around an iron core. The magnetic component of the rotor shall be made from steel laminations to aid stamping conductor slots to specific shapes and sizes. This rotor should operate at a speed 1500 rpm (revolutions per minute) and 40% of its rated torque without excitation all as spcified & directed by Engineer-in-charge .

Supply only field winding (Stator) of ceiling fan 1200 mm sweep complete of any make as per sample with starting and running coil and connectors. The core of the stator is made of steel frame enclosing a hollow cylindrical core bounded up of laminations of silicon steel and copper wounded. The stator should be electromagnet and suitable to energizes the field windings. all as specified & directed by Engineer-in-charge .

Supply only blade assembly for 1200mm sweep ceiling fan made of galvanised Iron sheet with suitable gauge heavy duty duly welded with connecting brackets complete set of three numbers of any make as per sample white in colour all as specified & directed by Engineer-in-charge .

Supply only Outer body of ceiling fan of any make (as per sample) complete top and bottom with nut & bolt, made of aluminium alloy, heavy duty suitable for ceiling fan 1200 mm sweep including cleaning all dust etc all as spcified & directed by Engineer-in-charge .

Supply only fan clamp with rubber bush and safety pin suitable for ceiling fan all as specified and as directed.

Supply only ceiling Fan canopy white in colour suitable for ceiling Fan 1200/1400 mm sweep of any make as per sample complete top and bottom all as specified and as directed.

Supply and fix for down rods 1.0 metre long of 15mm dia GI pipe including welding and fixing with clamps and nut bolts etc complete all as specified and as directed.

Supply and fix for down rods 1.5 metre long of 15mm dia GI pipe including welding and fixing with clamps and nut bolts etc complete all as specified and as directed.

Supply and fix for down rods 2.0 metre long of 15mm dia GI pipe including welding and fixing with clamps and nut bolts etc complete all as specified and as directed.

Taking down Exhaust fan of 300mm size/ sweep after disconnecting the wire from existing ceiling rose for replacing the under mentioned unsv spares and refixing the same after cleaning all dust,oil etc all as spcified and directed by Engineer-in-charge (Note :- Spares shall be measured and paid seperataly as 'Supply Only' and rewinding item paid seperately under relevant items)

Supply only Exhaust fan metal body assembly heavy duty with lowers and clamps 4/3 Nos suitable for 300mm sweep complete of existing make all as specified and as directed.

Supply only Exhaust fan Motor assembly complete with Armature (Rotor) unit and Field winding (Stator) unit with shaft suitable for 300mm sweep of existing make all as specified and as directed.

Supply only Exhaust fan blade assembly heavy duty of metal suitable for 300mm sweep of existing make all as specified and as directed.

Taking down Exhaust fan of 250mm size/ sweep after disconnecting the wire from existing ceiling rose for replacing the under mentioned unsv spares and refixing the same after cleaning all dust,oil etc all as spcified and directed by Engineer-in-charge (Note :- Spares shall be measured and paid seperataly as 'Supply Only' and rewinding item paid seperately under relevant items)

Supply only Exhaust fan metal body assembly heavy duty with lowers and clamps 4/3 Nos suitablefor 250mm sweep complete of existing make all as specified and as directed.

Supply only Exhaust fan Motor assembly complete with Armature (Rotor) unit and Field winding (Stator) unit with shaft suitable for 250mm sweep of existing make all as specified and as directed.

Supply only Exhaust fan blade assembly of metal heavy duty suitable for 250mm sweep of existing make all as specified and as directed.

Taking down Exhaust fan of 200mm size/ sweep after disconnecting the wire from existing ceiling rose for replacing the under mentioned unsv spares and refixing the same after cleaning all dust,oil etc all as spcified and directed by Engineer-in-charge (Note :- Spares shall be measured and paid seperataly as 'Supply Only' and rewinding item paid seperately under relevant items)

Supply only Exhaust fan metal body assembly heavy duty with lowers and clamps 4/3 Nos suitable for 200mm sweep complete of existing make all as specified and as directed.

Supply only Exhaust fan Motor assembly complete with Armature (Rotor) unit and Field winding (Stator) unit with shaft suitable for 200mm sweep of existing make all as specified and as directed.

Supply only Exhaust fan blade assembly heavy duty of metal suitable for 200mm sweep of existing make all as specified and as directed.

Taking down Exhaust fan of 150mm size/ sweep after disconnecting the wire from existing ceiling rose for replacing the under mentioned unsv spares and refixing the same after cleaning all dust,oil etc all as spcified and directed by Engineer-in-charge (Note :- Spares shall be measured and paid seperataly as 'Supply Only' and rewinding item paid seperately under relevant items)

Supply only Exhaust fan metal body assembly heavy duty with lowers and clamps 4/3 Nos suitablefor 150mm sweep complete of existing make all as specified and as directed.

Supply only Exhaust fan Motor assembly complete with Armature (Rotor) unit and Field winding (Stator) unit with shaft suitable for 150mm sweep of existing make all as specified and as directed.

Supply only Exhaust fan blade assembly heavy duty of metal suitable for 150mm sweep of existing make all as specified and as directed.

Taking down Exhaust fan of 450mm size/ sweep after disconnecting the wire from existing ceiling rose for replacing the under mentioned unsv spares and refixing the same after cleaning all dust,oil etc all as spcified and directed by Engineer-in-charge (Note :- Spares shall be measured and paid seperataly as 'Supply Only' and rewinding item paid seperately under relevant items)

Material and labour for rewinding of exhaust fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling and testing of size 450 mm sweep complete all as specified and as directed.

Material and labour for rewinding of exhaust fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling and testing of size 300 mm sweep complete all as specified and as directed.

Material and labour for rewinding of exhaust fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling and testing of size 200 mm sweep complete all as specified and as directed.

Taking down ceiling fan of any size/ sweep after disconnecting the wire from existing ceiling rose for repair/ replacing the unsv gun metal bush, rubber reel with clamp and nut-bolts, washers, lock pin or taken to work - shop for rewinding and refixing the fan after rewinding, cleaning dust, oiling, greasing, servicing, etc as per existing & connecting flexible 3 core cable from ceiling rose to connector of fan, all dust etc all as directed spcified by Engineer-in-charge (Note- Gun metal bush, rubber reel with clamp, nut-bolts etc shall be measured and paid separetaly as 'Supply Only' and rewinding item paid seperately under relevant item)

Supply only for brass GM bush suitable for fan any size complete all as specified and as directed

Supply only for rubber reel insulator, 3 Nos nut bolt , washer and lock pin complete all as specified and as directed.

Material and labour for rewinding of ceiling fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling and testing of size 1200 mm sweep complete all as specified and as directed.

Material and labour for rewinding of ceiling fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling and testing of size 1400 mm sweep complete all as specified and as directed.

Taking down ceiling fan of 1200mm sweep after disconnecting the wire from existing ceiling rose for painting with one coat white colour synthetic enamel paint by gun spray and filling cavaties with metalic fillar, after cleaning all dust etc including writing MES/ Sl No of fan all as specified and directed by Engineer-in-charge

Taking down ceiling fan of 1400mm after disconnecting the wire from existing ceiling rose for painting with one coat white colour synthetic enamel paint by gun spray and filling cavaties with metalic fillar, after cleaning all dust etc including writing MES/ Sl No of fan all as specified and directed by Engineer-in-charge

Attending the complaints of non functional and Preventive maintenance of storage type electric water heater (Geyser) of capacity 25/50 ltrs comprising of the following tasks at different locations of any make, complete all as specified and as directed.:-(a) Inspection of geyser after opening bottom cover plate.(b) Examine water tightness of storage tank.(c) Carry out operation of all stop cocks, pressure reducing valves, etc. to ensure free movement of the working parts.(d) Replace washers and glands of defective taps to ensure water tightness smooth functioning.(e) Inspect vent pipes and remove blockage obstruction if any.(f) Check and correct earth continuity of electrical items.(g) Check and correct temperature setting of thermostats and test its functioning.(h) Checking and adjustments of pressure reducing valves.(J) Checking of dead weight type high pressure release valve (PRV) by removing dead weight protection cleaning the seat and ensuring that the waste hole is not blocked / chocked.(k) Painting of outer side of geyser with single coat of Enamal Paint White in colour incl Clamps and writing MES/ Srl number (l) Testing of Geysers after repairs/maintenance in all respect for proper functioning.

Taking down storage geyser of any capacity after disconnecting electrical connection from existing socket, removing the bolts and nuts from wall and disconnected inlet and outlet water connection for repair/ replacing the unsv items and assemble the same after making serviceable, cleaning dust including connecting flexible 3 core cable as required, with proper filling of glass wool as heat resistance material, suitable quantity etc and refixing the geyser at it's original location complete all as directed spcified by Engineer-in-charge (Note- Spare parts of geyser shall be measured and paid separetaly as 'Supply Only' under relevant item)

Supply only 1500 watts Heating element long length suitable for existing cylindrical type geysers all as per sample including rubber washers .

Supply only 2000 watts Heating element long length suitable for existing cylindrical type geysers all as per sample including rubber washers .

Supply only Thermostat analog & adjustable type suitable for the Geysers 25 ltrs/ 50 ltrs capacity, 20 Amps, 240 Volts AC, 210mm/300mm long or nearest size as per sample.

Supply only 600mm long PVC connections pipe with brass hexagonal adapters both side suitable for 15mm bore pipe for cold water all as specified

Supply only 600mm long PVC connections pipe with brass hexagonal adapters both side suitable for 15mm bore pipe for Hot water all as specified

Supply only Non-return valve 15mm dia of brass ISI marked as per requirement.

Supply only Non-return valve 20mm dia of brass ISI marked as per requirement.

Supply only for indicators of Geysers of any capacity/ type as per requirement.

Supply only Cable PVC insulated 3 core 2.5 Sqmm with stranded copper conductor 1100 Volts grade from socket/switch to geyser as per requirement.

Supply only 3 pin plug top, 16 amp capacity, 240 VAC, heavy duty, ISI marked

Supply only for safety valve plug made out brass metal with fusible lead, inner thread type suitable for geyser of any type/ capacity.

Supply only outer body complete of stoage water heater 25 Ltr capacity any type (Vertical/Horizotal) any make including reinforced PUF insulation with required dense as specified and as required to hold the temperature of hot water all as directed.

Supply only High pressure resistance inner body and Special enamel-coated inner tank complete for storage water heater 25 Ltr capacity suitable for existing (make)water heater including PUF insulation all as specified

Supply only housing assembly of storage water heater 25 ltr capacity suitable for installing heating element and thermostat (verticle and horizantal type) suitable for existing (make)water heater as specified

Supply only thermostat digital type for the range 25 to 90 degree celcius, suitable for 25 ltr storage type water heater all as specified

Supply only complete outer body of stoage water heater 50 Ltr capacity any type (Vertical/Horizotal) suitable for existing (make) water heater including reinforced PUF insulation with required dense as specified and as required to hold the temperature of hot water all as directed.

Supply only High pressure resistance inner body and Special enamel-coated inner tank complete for storage water heater 50 Ltr capacity suitable for existing (make)water heater including PUF insulation all as specified

Supply only housing assembly of storage water heater 50 ltr capacity suitable for installing heating element and thermostat (verticle and horizantal type) suitable for existing (make)water heater as specified

M & L for painting the stoage water heater 25 Ltr capacity any type (Vertical/Horizotal) with one coat with white colour synthetic enamel paint by spraying and filling cavaties with filler, after cleaning all dust etc including writing MES/ Sl No. all as specified and directed by Engineer-in-charge.

M & L for painting the stoage water heater 50 Ltr capacity any type (Vertical/Horizotal) with one coat with white colour synthetic enamel paint by spraying and filling cavaties with filler, after cleaning all dust etc including writing MES/ Sl No. all as specified and directed by Engineer-in-charge.

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. 3. The site is in scattered area. The building(s)/site(s) shall be handed over in phases and the contractor will have to arrange his working programme accordingly. No claim whatsoever for not giving the entire site on award of work and for giving the site gradually will be admissible, except granting fair and reasonable extension of time.

m/s Pravin s Bhosale

SHRIYA CONSTRUCTION

shrilaxminarayan constructions