Karnataka

Active

Works

Electrical

Providing Diesel Generator Set to District Prison, Mangalore D.K District.

Public Works Department

PWD Electrical Division Office Bengaluru | Bengaluru Urban, Karnataka

Amount: Refer DocsCloses: 15 Jun 2026

Tender Value

Refer Docs

EMD Value

₹30,000

Closing Date

15 Jun 2026, 9:30 pm

Tender Inviting Organisation

Name

Public Works Department

Work Description

Providing Diesel Generator Set to District Prison, Mangalore D.K District.

Tender Information

Tender ID

302811

Reference Number

PWD/2026-27/EL/WORK_INDENT35406/CALL-2

Tender Type

Open

Product Category

Electrical

Location

PWD Electrical Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredClass-2 and Above Electrical Inspectorate Registration Certificates

RequiredAnnual Turn over Certificate with Balance Sheet Statement certified by a Registered Charted Account with UDIN No.

RequiredWork done certificate issued by an officer not below the rank of Executive Engineer/ Equivalent.

RequiredOngoing and existing commitments details

RequiredTender Bid capacity statement.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The intending tenderer is instructed to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-1 K.P.W.D. and further orders there on.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

All necessary paper works, etc. and any other formalities required to be observed shall be the responsibility of contractor.

Whenever executing authority insist proof of having purchased the materials (used during executing the work) for verification. The contractor shall produce the purchase bills.

The contractor is responsible for safety and security of all materials.

All hard ware materials used for work shall be of hot dip galvanized as per IS wherever necessary.

It is the responsibility of the contractor to pursue and obtain all necessary approvals.

The Contractor shall submit to the employer, for his review and approval, all shop drawings, samples, materials lists, equipment data, instruction manuals, record documents, manufacturers equipment manuals, and other information required by the Contract Documents, before use and execution and before bringing the material at Site.

The bidder should obtain the approval from the Govt. Electrical inspectorate/BESCOM/KPTCL for successful commissioning of the DG set. However the statutory fee will be paid by Dept. after receipt of intimation from the respective authorities.

The Original Documents must be produced at the time of opening of Technical Bid, attached for the eligibility of technical qualification criteria, for verification.

Tenderer should not damage the building while erection of D.G. set, If any damages made, tenderer should make good of it, without any charges.

The successful Tenderer has to arrange factory inspection along with the departmental office on his own cost. The equipment has to be tested at factory in presence of departmental officials before dispatching the material from the factory to the worksite.

As per Karnataka State Government order No. LD/300/LET/2006 Bangalore Dated 01.01.2007 and G.No. PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1% of the bill amount will be deducted welfare fund.

The tenderer shall obtain the work done certificate in the prescribed format from the competent Authority not below the rank of Executive Engineer (District level Officer) and scan the original Certificate and attach the scanned file Certificate/ Certificates shall be produced at the time of opening of tender for physical verification.

The tenderer shall scan the original ownership document/ lease / hire commitment Agreement scanned file to the Bid. The Original Documents shall be produced at the time of opening of Tender.

The Employer reserves the right to reject any or all Tenders without assigning any reason.

The tenderer should furnish Qualification and experience of the key technical and Management personnel in permanent employment with the Tenderer and those that are proposed to be deployed on this work, if work is awarded.

The start date for this work has to be considered from the date of issue of work order.

Tenderers must provide insurance to all the employees executing this work.

The employer is not responsible for any delay in accessing Karnataka Public Procurement Portal.

The Laboures deployed shall mandatory wear the face mask, Electrical safety hand gloves and take all safety measures to protect laboures and staff.

The Agency Should Coordinate with Civil Work.

The agency should consider necessary ladder etc required for fixing Electrical times.

The agency considers all labours required for fixing items.

The agency should inspect the site before quoting the tender.

As per the Govt Order No PW2BMS2019 Bangalore Dated 19-06-2019 the applicable GST shall be paid to the tenderer for PWD SR Items only.

The Contractor must obtain the necessary approvals as per the Pollution Control Board norms

The Legal & Environmental Management System (EMS) Control Clause has to be followed by the contract.

Technical Criteria

Past Experience

3.2To qualify for award of this contract, each tenderer in its name should have in the last Five years i.e. 2021-22 to 2025-26. b) Satisfactorily completed (at least 50% of the contract value), as prime contractor, at least one similar work i.e., Supply installation, testing & commissioning of DG Set and connected Work in total of Value not less than: Rs.5.94 Lakhs in a single work.

Others -- Work done certificate issued by an officer not below the rank of Executive Engineer/ Equivalent

Capabilities of Vendor

The tenderer as a Prime Contractor having valid Class-2 & above Electrical License issued by Electrical Inspectorate Govt. of Karnataka and should have suitable technical, financial & managerial capabilities.

Others -- Class-2 and Above Electrical Inspectorate Registration Certificates

3.6Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under/ Assessed available tender capacity - (AxNx2.5 - B ) Where, A-Maximum value of construction works executed in any one year during the last five years (updated 2026-27 price level) taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. (03 Months) B - Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next. (03 Months) (period of completion of the works for which Tenders are invited) Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Others -- Tender capacity statement

The Tenderer must submit ongoing and existing commitments details separately

Others -- Ongoing and existing commitments Works List.

Financial Status

The Bidders shall deposit E.M.D of Rs. 30,000/- through any e-payment mode.

Others -- EMD

3.2To qualify for award of this contract each Tenderer in its name should have during last five years ie from 2021-22 to 2025-26 a) The tenders must have achieved in at least two financial years an average annual financial turnover of an amount Not less than Rs.11.88 Lakhs during last five years. with UDIN Number certified by Chartered Accountant, Note: The returns submitted to the I.T. along with the Profit and Loss account statement, Balance sheet should be uploaded for the financial turnover criteria

Others -- Audited CA Certificate of Annual Turnover with Balance Sheet and UDIN Number.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹30,000

Important Dates

Last Activity

1 Jun 2026

Published

1 Jun 2026

Bid Opening

16 Jun 2026

Download Ends

8 Jun 2026

BOQ Preview

•

Providing Diesel Generator Set to District Prison, Manglore D.K District.

•

Open Conduit System Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverte...

•

Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 m...

•

Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 m...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 100 A ---- Items of work are including...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

•

Supplying and fixing of Shunt trip suitable for MCCB.CBCT ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading a...

•

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with ...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board., 63 A 4 pole ---- Items of work are including cost and convey ance ...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.. ---- Items of work are including cost and convey ance of all materi...

•

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front...

•

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insula...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.. ...

•

Supplying, installing, testing and commissioning of 58.5 KVA/47 Kw CPCB IV BS-6 Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO ...

•

Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland p...

•

Supplying of 1.1 KV ,XLPE or Heat reisistant PVC insulated , PVC extrusted inner seath Armored , LTUG Cable as per IS-1554 ( Part-1) or IS-7098 Part-1 , Armouring strip thickness and resistively as pe...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both desti...

•

Laying of cable in existing Trench / GI Pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminium Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm ---- Items of work are including cos...

•

Supplying of Aluminium End Terminal (Lug) 16 Sqmm ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading and un...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required. GI/Copper strips 25 x 3 mm GI strip ---- Items of work are including cost and convey ance of all materials, la...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KPPP kw-1 bid_ 35406 Call-2.doc

Tender Document • 1.06 MB

Ready to Participate?

Download all tender documents and submit your bid

Providing Diesel Generator Set to District Prison, Mangalore D.K District.

Market Intelligence

Tender Inviting Organisation

Work Description

Tender Information

Documents Required

Eligibility Criteria

Technical Criteria

Fee & Financial Details

Important Dates

BOQ Preview

Documents

NIT Documents

Ready to Participate?