RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Lead Acid Battery ( 10 pieces ) Technical Specifications * As per GeM Category Specification 1/6 Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Types of Lead Acid of Battery Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995 Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1
Required2 & 3) with latest amendments
RequiredStatinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992
RequiredStationary cells and Batteries
RequiredLead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991
RequiredStationary Valve Regulated Lead Acid Batteries conforming to IS:15549/2005
RequiredLead- Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995
RequiredLead- Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Hard Rubber
RequiredFibre Reinforced Plastics (FRP)
RequiredPolypropylene
RequiredABS Rated Capacity at C20 discharge (AH) 80 80 Warranty (Years) 2 Years 2 Years
Required3 Years Battery Condition Dry Charged * CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications * Volume of Electrolyte (ml) - * Weight of Dry Battery (Kg) shall be as per relevant IS: Specn.
Requiredcorresponding Ah Yes. * 2/6 No.of cells per Battery (No.) 6 Cells for 12 Volt battery * CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes * Address of the Lab - * Name of the Lab - * Test Report No. - * Test Report Date - * Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells
Requiredand for Batteries made from them for use in portable applications - * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.