Toilet complex near Madrassa Talab

Amount

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. A). 30 % All kinds of soils

Providing and laying in position cement concrete (1:3:6)mix in foundation &plinth using 20mm Nallah stone aggregate with 30%boulders excluding shuterring including all leads and lifts complete: A). 80% concrete

Brick work with common burnt clay F.P S ( non modualar) bricks of class designation 75 in foundation and plinth cement mortar 1:6 (1 cement :6 fine sand

Extra for brick work in super structure above plinth level lupto floor V level.

P L of 1:1.5:3 (1 Cement : 1.5 coarse sand :3 graded crushed stone aggregate 20 mm nominal size),

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete . TMT bars.Including all leads, lift and carriage complete

Centering and shuttering including strutting, propping etc. and removal of formwork for Foundations, footings, bases of columns, etc.

Centring and shuttering including strutting propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls under 20cm wide

12mm thick cement plaster in 1:4(cement:sand) Including all leads, lift and carriage complete

6 mm cement plaster to ceiling of mix 1:3 fine sand )

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade . Two or more coats on new work

Providing electrification including service line MCB,s etc complete .

Providing and fixing liquid Soap Container 109 mm wide Hindware, Cera or Jaquar make.

Providing and fixing Towel Ring Hindwear, Cera or Jaquar make.

Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic .moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 20mm nominal bore

Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap

Providing and fixing wash Basin with C. I./M.S. brackets, with 15 mm dia tap and all other accessories complete job (660 X 460mm) Hindware, Cera or Jaquar make .

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete semi rigid pipe 32 mm dia

Providing and fixing G. I. inlet connection for flush pipe connecting with W.C. Pan

Providing and fixing white vitreous china pedestal type water closet ( indian type W.C with seat & lid complete w.c pan with ISI marked white solid plastic seat & lid complete) Hindware, Cera or Jaquar make.

Fixing white vitreous china urinal basin One urinal basin with 5 liter white P.V.C automatic flushing cistern.

Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing 4 inch PVC bend

Providing and fixing 4 inch PVC collar

Providing and fixing P Trap

Providing and fixing Flow trap 2/5 inch

Providing and fixing Bend 2/5 inch

Providing and fixing 15 mm dia elbow

Providing and fixing PVC pipe 4.0 inch dia superior quality

Providing and fixing 20 mm dia elbow

Providing and fixing PVC pipe 2.5 inch dia superior quality

Providing and fixing of steel work in frames of doors windows and clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or with dash fastners shall be paid for separately).

Providing and fixing panelling or panelling and glazing in pannelled or pannalled & glazed shutters for doors, windows and clerestory windows( Area of opening for panel inserts excluding portion inside groves or rebates to be measured ) panelled or panelled and glazed shutters 25 mm to 40 mm thick

Javed Iqbal Jaral

AMIR NAZIR JARAL