SPL REPAIRS TO BLDG NO P-718 (KERKETTA AUDITORIUM) AND SPL REPAIRS TO ROOF OF BLDG NO P-27 OR LINE AND BATHROOM/ SEWAGE SYS INCL MISC SANITARY AN PLUMBING FITTINGS IN BLDG NO P-30 (IST FLOOR BATHROOM) OF OTM ACCN OF 44 FD REGT AT DIPATOLI POCKET OF R

Amount

Demolition of brick work built in cement mortar or lime mortar complete of any description all as specified and directed.

M&L Brick work with subclass ‘B’ bricks modular type, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

Demolition of cement concrete (un reinforced) of any description incl. floor tile and in any position not otherwise specifically provided for all as specified and directed.

M&L cement concrete type B-1, (1:2:4) (20mm graded aggregate) as in cills, coping, bed block, steps, bed plates etc, complete all as specified and directed.

M & L for rendering 15 mm thick in cement Mortar (1:4) on the surfaces fair faces of brick work/concrete and finished the surface fair and even complete all as specified and directed

M & L for rendering 10 mm thick in cement Mortar (1:4) on the surfaces of ceiliing and finished the surface fair and even complete all as specified and directed

Complete removal of existing treatment on wall surfaces complete all as specified and directed.

M&L preparation of newly / old plastered surfaces of wall and applying a coat of wall care putty 3 mm thick to make the surfaces truly smooth complete all as specified and directed

M &L for applying two coats of distemper oil emulsion over a coat of primer white or tinted on already prepared wall surfaces (or necessary preparation if required ) complete all as specified and directed.

M &L for applying one coat of distemper oil emulsion on old surfaces of wall / Ceiling including necessary preparation of surfaces complete all as specified and directed.

M &L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primar complete all as specified and directed.

M &L for preparation of old plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450X 350X 7mm thick over10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in floor etc, with and including over 15 mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed.

M&L high definition printing of vitrified tiles and surface textures heavy duty parking tiles 30cmx30cmx10mm thick over 15mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in skirting/dado etc, with and including over 10 mm thick plaster in CM(1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed.

M&L vitrified ceramic tiles light shade 10 mm thick (square / rectangular) polish, area of each tiles not exceeding 0.36 Sqm in size as in floor etc set and jointed, joint free and pointed in white or coloured cement to match incl 20 mm thick screed bed in CM 1:6 on concrete surface rough finish to recive tiles all as specified and directed.

M&L vitrified ceramic tiles light shade 10 mm thick (square / rectangular) polish, area of each tiles not exceeding 0.36 Sqm in size as in dado / skirting etc set and jointed, joint free and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar (1:4) finished rough to recive tiles all as specified and directed.

M&L for applying one coat of weather proof exterior emulsion paint (1st quality) / plastic emulsion paint on walls, chajjas, facia of any height of bldigs etc, including preparing of old surfaces with brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots completed all as specified and directed.

M&L for complete removal of existing treatment on wall of any height of bldgs by brooming down with wire brushing, stoping an applying two coats of exterior weather coat/ plastic emulsion under one coat of primer, complete all as specified and direted.

S&F in repaire Vitreous china white wash down water closet (Pedestal pattern) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc incl P or S trap.

S&F chromium plated health faucet with 1 m long pipe

S&F chromium plated hand shower

S&F chromium plated toilet paper holder size 150 x 150mm complete all as specified and directed.

S&F in repairs. vitreous china wash basin, white flat back size 550 x 400mm (excluding taps), incl. CP waste coupling & PVC waste pipe and brackets

S&F in repair for PVC waste pipe of 32/38/40 mm dia and 1000 mm long to WHB, urinal and Kitchen sink complete all as specified and directed.

Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth, complete all as specified and directed

Refixing old steel tubing and connections in new or old position 15mm dia, complete all as specified and directed

Refixing old steel tubing and connections in new or old position 20mm dia, complete all as specified and directed

S&F in repair stop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore, complete all as specified and directed

S&F in repair Angle valve / stop valve, cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore (fancy type), complete all as specified and directed

S&F in repair Angle valve two way, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore (fancy type), complete all as specified and directed

S&F in repairs Brass CP mixer tap 15mm dia bore (three in one) for mixing hot & cold water screwed down for iron pipe (fancy type), complete all as specified and directed

S&F in repairs Brass CP mixer basin tap (mixer pillar tap) 15mm dia bore for mixing hot & cold water with lettered HOT and COLD screwed down for iron pipe (fancy type), complete all as specified and directed

S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule (fancy type)

M&L Brass Chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union incl shower (fancy type), complete all as specified and directed

S&F in repair Brass chromium plated tubular towel rail 20mm dia, D type, 60 cm long between flanges, complete all as specified and directed

Dismantling existing water tanks 1000 ltr and removing to stores complete all as specified and directed

S&F in repair hoisting 3 layers PVC tank 1000 litres capacity (Anti fungal microbial property) including supply & Fix 20mm dia brass float valve assembly complete all as specified and directed

Easing of existing door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed

Taking down chowkhat or frame with shutters (without taking off shutters from the frames) n exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutters (without taking off shutters from the frames) Exc 1.50 Sqm but n exc 4 Sqm each complete all as specified and directed.

M&L 2nd class hardwood plain, solid, straight chowkhats and frame, wrought, framed rebated on solid, rounded or chamfered, put together with glue pinned at joints supply & fixed, complete all as specified and directed

S&F factory made 35 mm thick plain framed, panelled shutter (any number of panels) with panels of timber flat on both side (fether edged), or veneered particle board medium density, wood particle board with commercial face veneers: supply and fitted to chowkats complete all as specified and directed.

Providing and fixing of powder coated aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specification and making good the adjascent surfaces :- (a) Window frame of cross section 101mm x 40 mm x 1.5 mm thick. (b) Three way track for sliding shutters of cross sections 91.80mm x 31.75mm x 1.1 mm thick. (c) Sliding shutter frame of cross section 40 x18 x 1 mm (d) Aluminium glazing strip of size 18.2 x 16.66mm (e) 4 mm thick float glass superior quality for 2 shutters. (f) IDPE rubber gasket for fixing glass (g) Locking cleat per shutter 01 Nos. (h) 02 Nos sliding rollers per shutters. (j) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm for one shutter. (k) Fixing screws for frame with wall 06 per window

S & F Powder coated aluminium ventilator louvre type with frame, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc, complete all as specified and directed.

S & F Powder coated aluminium door frame of approved manufacturer using approval aluminium section of following sizes fixed to floor, wall with rawl plug and screwe, etc, complete all as specified and as directed. (a) Door frame of size 95.25mm x 44.45mm x 1.5mm

S&F in repairs ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S&F in repairs flush pipe 32 mm dia of polyethylene of low or high density or PVC, for low level cistern complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories

M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls excluding clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed

M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints,laid in trenches or in floors or wall complete all as specified & directed.

S&F for MS Butt hinges medium weight, cold rolled Mild Steel for 100 mm size complete all as specified and directed

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm)

S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm)

S&F in repairs Aluminimum anolised barrel tower bolt of extroded section 150mm long, complete all as specified and directed

S&F in repair Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed.

S&F framed work such as grills, grating doors or gates etc. of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of water tanks and similar work confirming to Fe 290.

M&L for preparetion of new steel surfaces and applying two coats of synthetic enamel paints over a coat of primar with red oxide on new steel surfaces over 10cm width or girth, complete all as specified and directed

M&L one coat of synthetic enamel paints on old steel surfaces over 10cm width or girth after necessary preperation of old surfaces, complete all as specified and directed

M&L for preparation of new wood and wood based surfaces and applying two coats of synthetic enamel paints over a primary coat of pink primer over 10cm width or girth, complete all as specified and directed

M & L for preparation of old painted surface of wood over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed.

S&F in repairs curtain rails 20 mm dia, mild steel, chromium plated including with fixing brackets, stops, rollers etc for cub board, complete all as specified and directed

M & L perforated particle boards or tiles 25mm thick for insulation & accoustic purpose 30cm x 30cm in size complete all as specified and directed.

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long (fancy type), complete all as specified and directed

M&L for roof treatment in repair by complete removal of existing old treatment and Brushing neat cement slurry with 3.0kg of cement per sq. metre, complete all as specified and directed

M&L for Applying oil based bitumen primer @ 0.30 ltr/Sqm on plasterd surface for use in water proofing and damp-proofing treatment, complete all as specified and directed

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed

M&L for Appling two coat of aluminium paint @ 200 gm /sqm over bituminous surface of membrane

Supply only integral water proofing compound, complete all as specified and directed.

M&L for preparing the newly surface of any description not otherwise described over 10 cm width or girth on steel surface and applying two coats of synthetic enamel paint over one coat of zinc chromate primer complete all as specified and directed

Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter without taking of shutter from framed complete incl removing from site, complete all as specified and directed

Taking down chowkhats or frame exc 1.50 Sqm but n.exc 4 sqm each with shutter without taking of shutter from framed complete incl removing from site, complete all as specified and directed

Taking up or down steel tubing and connection of 15 mm bore complete all as specified and directed

All as item No 76 above but for 20 mm dia bore pipe

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement, complete all as specified and directed

M&L for 10 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparing newly platered surfaces and applying two coats of distember oil emulsion white or tinted on walls complete over one coat of primer on walls complete all as specified and directed

M&L for preparing newly platered surfaces and applying two coats of distember oil emulsion white or tinted on ceiling complete over one coat of primer on walls all complete all as specified and directed

M&L for preparing the new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed

M&L for preparing the old surfaces by complete removel of existing treatment and applying two coats of cement based paint on walls complete all as specified and directed

M&L for repair and rendering 10mm thick in CM (1:3) on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete (1:2:4) Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs complete all as specified and directed.

S&F in repair PVC valveless syphonic duel flush action type low level flushing cistern 10 Ltr. Capacity of approved incl flush pipe of 32mm bore with fancy design, complete all as specified and directed

Disconnecting existing tank setting aside lowering if required for repairs cleaning etc and hoisting if required reconnecting and refixng in position (cleaning repairing etc measured sep exc 250 & n. exc 500 ltr), complete all as specified and directed

S & F in repair for PVC connection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as specified and directed.

S&F steel tubing and connection tubing in new or old position to walls, ceiling, floors etc including all fitting as socket, elbow, nipple, union etc for 15 mm bore complete all as specified and directed

Ditto all as above item No 89 but for 20 mm dia

S&F in repair 15mm dia angle stop valves cast copper alloy faney type,chromium plated complete all as specified and directed

S&F powder coated aluminium ventilator Luver type with frame , aluminium section weighting 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener, 5 mm thick figured glass strips etc completed all as specified and directed

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing complete all as specified and directed

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing with fancy design, complete all as specified and directed.

S & F Butt hinges extruded aluminum alloy with galvanized mild steel pin anodized 100mm type B21complete all as specified and directed

S&F 150 mm long aluminum anodized barrel tower bolt extruded section, complete all as specified and directed

S&F aluminum handles cast type anodize 150 mm long, complete all as specified and directed

S&F aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alumionium alloy and fixed 250mm long complete all as specified and directed

S&F in repairs for shower rose chromium plated with or without swivel joints 100 mm dia complete all as specified and directed

S&F in repairs pillar tap cast 15mm bore copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered head 'HOT' or 'COLD' with long screwed shank and flynuts screwed for iron pipe (half turn type), complete all as specified and directed

Dismantling of wall or floor tilling including cement mortar bedding complete all as specified and directed.

S&F glazed ceramic tiles in vertical surface 450x300x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed 10 mm thick in cement mortar (1:4) Charge, complete all as specified and directed

M&L for joint free non-skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18sqm, of approved colour in floors, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour. over 15mm thick screed bed in CM (1:4) for floor.

M&L for 110mm bore, PVC (SWR) pipes, single socketed in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

M&L for 75mm bore, PVC (SWR) pipes, single socketed in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

S&F PVC (SWR) bends 110 mm bore of any radius complete all as specified and directed

S&F PVC (SWR) bends 75 mm bore of any radius complete all as specified and directed

S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door complete all as specified and directed

S&F 110 mm bore PVC (SWR) vent cowl, complete all as specified and directed

S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement, complete all as specified and directed

S&F vitreous china squatting pan ORRISA Pattern of size 580x 440mm white with integral foot rest complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints complete all as specified and directed

M&L RCC (1:2:4) type B-1 using 20mm graded aggregate as in Chhajja, slabs. shelves etc including necessary formwork complete all as specified and directed

M & L for mild steel TMT bars upto 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided including removal of same to exceeding 1 Km but not exceeding 1.5 Km complete all as specified and directed.

M&L 75mm thick PCC (1:3:6), type C-2 using 40 mm graded stone aggregate as in plinth protection and path, complete all as specified and directed

M&L for brick work using sub class B bricks straight of curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.

M&L cement concrete type B-0, (1:2:4) (using 12.5 mm graded agg) as in sunken portion floor average thickness 50mm thick using water proofing compound, WPC will be measured and paid separately, complete all as specified and directed

M&L 10mm thick renderning on fair faces of brick work or concrete surfaces in CM (1:3) mixed with water proofing compound Note: water proofing compound shall be measured and paid separeately.

M&L cement concrete type E-2, 1:5:10 using 40mm graded brick agg as in filling in sunken portion complete all as specified and directed.

M&L for hot blown bitumen 85/25 two coats on concrete/plastered surface at the rate of 1.2 kg/sqm per coat complete all as specified and directed

M&L for polythene film black 200 micron laid in floors/wall etc complete all as specified and directed

S&F GI tubing 32mm bore light grade with all necessary fittings complete fixed on wall laid on floor complete all as specified and directed

S&F in repair vitreous china bowl urinal flat back,size of 430 x 370 x 340 mm white (minimum) with grating and union for discharge pipe(excluding flushing cistern, flush pipe and waiste pipe), complete all as specified and directed

Taking down carefully copper/aluminium casing caping (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

M&L point wiring for one light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm, single core, multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn through PVC Casing caping 20/25 mm on wall/ceiling, including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes, cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed.Note: The rate quoted is deemed to be included for Phenolic sheet (Hylem) and steel terminal box, cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces, complete all as specified and directed

M&L fixing PVC Casing caping 20 mm on wall/ceiling ,including replacement of old u/s PVC cashing caping, for exesting old servicable point wiring for existing old servicable point wiring of 1.5mm, 2.5mm, 4mm & 6 sqmm, Existing wiring/Submain wiring drawn through new PVC Casing caping/conduit on wall/ceiling ,including replacement. (Note: The rate quoted is deemed to be included for taking down of U/S PVC Casing caping/ conduit including cutting & fixing charges & making good to disturbed surface and matching with existing surfaces.)

M&L fixing PVC Casing caping 25 mm on wall/ ceiling ,including replacement of old u/s PVC cashing caping, for exesting old servicable point wiring for existing old servicable point wiring of 1.5mm, 2.5mm, 4mm & 6 sqmm, Existing wiring/Submain wiring drawn through new PVC Casing caping/conduit on wall/ceiling, including replacement. (Note:- The rate quoted is deemed to be included for taking down of U/S PVC Casing caping/ conduit including cutting &fixing charges & making good to disturbed surface and matching with existing surfaces), complete all as specified and directed

All as per Ser item No 129 here-in-before but one 3 Pin Socket out let 5 Amps on the same board, complete all as specified and directed

All as per Ser item No 129 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board, complete all as specified and directed

All as per Ser item No 129 here-in-before but one light point controlled by two way switches,with wire 1.5 Sqmm size, complete all as specified and directed

All as per Ser item No 129 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly.

S&F Switch Piano type 2 way switch 5 amp 230 v complete all as specified and directed.

Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified & directed.

S&F Switch piano type, single pole, one way 15 Amps complete all as specified and directed.

S&F Socket out let 2-in-1 2/3 pin 5 Amps complete all as specified and directed.

S&F Socket outlet 2-in-1, 3 pin, 5 and 15 amps, flush type complete all as specified & directed.

S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed.

M&L for lamp holder, PVC/Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed

M&L for submain complete with 2x1.5 sqmm, single core, multi stranded copper conductor FR PVC insulated and unsheathed FRLSH cable 1100 Volts grade, drawn in with and including PVC casing / caping 20/25 mm dia as per site requirement along walls/ceiling etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire (Phase red colour, neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)

All as per ser item No-141 here-in-before but 2x2.5 Sqmm and 1x 2.5 Sqmm for Earth wire, complete all as specified and directed

All as per ser item No-141 here-in-before but 2x4 Sqmm and 1x 4.0 Sqmm for Earth wire, complete all as specified and directed

All as per ser item No-141 here-in-before but 2x 6 Sqmm and 1x 6.0 Sqmm for Earth wire, complete all as specified and directed

S&F in replacement of MCB SP 6 to 32 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F in replacement of Lienear & compact 9 wat LED mirror light with decorative grey end caps, poly carbonate body and ribbed opal diffuser including 2/3 core flexible copper wire with flexible pipe ceiling rose to light fittings complete all as specified and directed

S&F in replacement of Ultra slim LED panel tube light fitting 36 watt 230 Volt made from extruded aluminium housing frame (recesss/pendant) 2' x2' Complete with all accessories internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F in replacement of LED tube light fitting 18 watt 230 Volt decorative ultra slim linear LED Lighting with aluminium housing & integrated electronic driver, including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

M/S CITY ENTERPRISES

Barehar Construction Pvt Ltd

M/S.R.S.Chauhan and Sons

Delhi Enterprises

M/S GYANITECH ENTERPRISES

M/s R R MUKHERJEE & CO

M/S RAMOTAR SAHU